NHTSA ID Number: 11031721
Manufacturer Communication Number: NTB26-019
TSB/Document Date: 2026-04-29
Summary
MIL ON WITH DTC P0181 STORED IN THE ECM IF YOU CONFIRM The customer states the MIL is ON but the vehicle does not have any drivability concerns or reduced power message in the combination meter
, AND DTC P0181 for “Fuel Tank Temperature” is stored in either “Past” or “Current” in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Replace the fuel temperature sensor. 2. Erase all the DTCs.
Classification:
Reference:
EC26-014
Date:
NTB26-019
April 15, 2026
MIL ON WITH DTC P0181 STORED IN THE ECM
APPLIED VEHICLES:
2025-2026 Kicks (P16)
2025-2026 Murano (Z53)
2022-2026 Rogue (T33)
IF YOU CONFIRM
The customer states the MIL is ON but the vehicle does not have any drivability concerns
or reduced power message in the combination meter,
AND
DTC P0181 for “Fuel Tank Temperature” is stored in either “Past” or “Current” in the ECM.
ACTION
Follow the SERVICE PROCEDURE in this bulletin to:
1. Replace the fuel temperature sensor.
2. Erase all the DTCs.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/8
SERVICE PROCEDURE
1.
Remove the fuel pump assembly.
To avoid severe personal injury or death, follow all cautions, warnings, and notes in
the ESM when working on or near a fuel system, such as a fuel pump.
2.
•
Kicks (P16) - Refer to the ESM: ENGINE > FUEL SYSTEM > REMOVAL AND
INSTALLATION > FUEL LEVEL SENSOR UNIT, FUEL PUMP AND FPCM >
AWD > Removal and Installation
•
Murano (Z53) - Refer to the ESM: ENGINE > FUEL SYSTEM > REMOVAL AND
INSTALLATION > FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL
PUMP ASSEMBLY > Removal and Installation
•
Rogue (T33) - Refer to the ESM: ENGINE > FUEL SYSTEM > KR15DDT >
REMOVAL AND INSTALLATION > FUEL LEVEL SENSOR UNIT, FUEL FILTER
AND FUEL PUMP ASSEMBLY > Removal and Installation
Confirm the position of the fuel temperature sensor attached to the fuel pump as
shown in Figure 1 and Figure 2.
Fuel temperature sensor
Figure 1
Figure 2
2/8
NTB26-019
3.
Lay the fuel pump sideways and position it so that the fuel temperature sensor faces
upward as shown in Figure 3.
Fuel temperature sensor
Figure 3
4.
Insert a slotted screwdriver into the gap or open space between the fuel temperature
sensor and the side of the fuel pump body as shown in Figure 5.
Gap or open space
Insert slotted screwdriver
Figure 4
Figure 5
3/8
NTB26-019
5.
Use the slotted screwdriver to lift the fuel temperature sensor from the clip on the fuel
pump body as shown in Figure 6, and then, at the same time, push the sensor from
the bottom side of the fuel pump with your fingers as shown in Figure 7 to remove.
HINT:
• Figure 8 shows the fuel temperature sensor in the installed position.
•
Figure 9 shows the fuel temperature sensor removed from the fuel pump body.
Push sensor
with fingers
Slotted
screwdriver
Slotted screwdriver
Figure 6
Figure 7
Fuel temperature
sensor installed
Clip
Fuel temperature
sensor removed
Fuel pump body
Figure 8
Figure 9
4/8
NTB26-019
6.
After removing the fuel temperature sensor, remove the sensor wires from the pump
as shown in Figure 10 and disconnect the sensor harness connector from the fuel
pump as shown in Figure 11.
Remove sensor
wires from pump
Disconnect sensor
harness connector
Figure 10
7.
Figure 11
Insert the new fuel temperature sensor so that it passes over the clip on the fuel pump
body to secure as shown in Figure 12 and Figure 13.
Fuel temperature
sensor
Figure 12
Fuel temperature
sensor
Figure 13
5/8
NTB26-019
8.
Route the wires for the new fuel temperature sensor as shown in Figure 14, Figure
15, and Figure 16.
Figure 14
Figure 15
Route the new fuel
temperature sensor
wires to surround or
enclose the other wires.
Figure 16
6/8
NTB26-019
9.
Connect the new fuel temperature sensor harness connector to the fuel pump as
shown in Figure 17.
Connect the
sensor harness
connector
Figure 17
10.
The fuel temperature sensor replacement is now complete as shown in Figure 18.
Figure 18
7/8
NTB26-019
11.
Re-install the fuel pump assembly and use a new O-ring seal between the fuel pump
and fuel tank.
To avoid severe personal injury or death, follow all cautions, warnings, and notes in
the ESM when working on or near a fuel system, such as a fuel pump.
12.
•
Kicks (P16) - Refer to the ESM: ENGINE > FUEL SYSTEM > REMOVAL AND
INSTALLATION > FUEL LEVEL SENSOR UNIT, FUEL PUMP AND FPCM >
AWD > Removal and Installation
•
Murano (Z53) - Refer to the ESM: ENGINE > FUEL SYSTEM > REMOVAL AND
INSTALLATION > FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL
PUMP ASSEMBLY > Removal and Installation
•
Rogue (T33) - Refer to the ESM: ENGINE > FUEL SYSTEM > KR15DDT >
REMOVAL AND INSTALLATION > FUEL LEVEL SENSOR UNIT, FUEL FILTER
AND FUEL PUMP ASSEMBLY > Removal and Installation
Erase all the DTCs using CONSULT.
PARTS INFORMATION
(1)
DESCRIPTION
PART NUMBER
QUANTITY
SEN - TEMP (Fuel Temperature Sensor)
22630-6RF0A
1
PACKING - FUEL GAUGE (O-Ring Seal)
(1)
1
Reference the electronic parts catalog and use the VIN to determine the correct part
number for the PACKING - FUEL GAUGE (17342-xxxxx).
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
MODEL
Rogue FWD
Replace Fuel Temperature
Sensor
Kicks ALL
OP CODE
SYM
DIA
(1)
FX72AA
FX79AA
FRT
0.8
FX71AA
Rogue AWD
Murano ALL
(1)
PFP
ZE
FX81AA
32
0.9
0.7
0.9
Reference the PARTS INFORMATION table above and use the Fuel Temperature
Sensor as the Primary Failed Part (PFP).
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
April 15, 2026
NTB26-019
DESCRIPTION
Original bulletin published
8/8
NTB26-019
- DESIGNED TO EXCEED EXPECTATIONS: Red Line complete SI-1 fuel...
- PERFORM AND PROTECT: Fuel additive cleans injectors...
- EFFICIENT FUEL BURN: A gas treatment that enhances gasoline...
- EASY TO USE: Use one bottle of Redline Fuel System Cleaner...
- ENAHNCED ENGINE EFFCIENCY: Experience improved fuel economy...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB26-019
Replacement Service Bulletin Number:
MFR Communication Date: 2026-04-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.