Classification:

Reference:

BT09-032C

Date:

ITB09-063C

April 13, 2026

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.

APPLIED VEHICLES:

All Infiniti

SERVICE INFORMATION
Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label”
may be needed.
HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label.
These items may be available from Infiniti by request if certain criteria are met.
This bulletin lists the criteria and provides an application form for such replacements.
•

The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the
driver side at the base of the windshield (see Figure 1).

•

The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar
(see Figure 1).

xxxxxxx

VIN Plate

xxxxxxx

VIN Label

xxxxxx

Certification Label
Figure 1
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this
applies to your vehicle.
1/6

CERTIFICATION LABEL REPLACEMENT CRITERIA
HINT: See page 4 for replacement VIN plate/label.
A replacement Certification Label may be requested ONLY if the vehicle is UNSOLD and missing the label, or
if the vehicle is in a collision and:
•

The Certification Label is damaged,
or

•

The Certification Label is attached to a part that will be replaced during the repair.

REQUESTING A REPLACEMENT CERTIFICATION LABEL
1. Take a photo of the original Certification Label in its original location on the vehicle B pillar.
• A photo of the original Certification Label before it is removed must accompany the application.
• If the vehicle is produced inside or outside the U.S. and a legible Certification Label photo is not
provided, the request will be rejected.
2. If the vehicle is produced in the U.S. and the original Certification Label has been lost/is not available to
capture a photo;
• The vehicle MUST NOT have been sold since the time the vehicle was manufactured.
• A photo of the odometer mileage and VIN label must accompany the application.
3. Completely fill out a copy of the APPLICATION FOR REPLACEMENT CERTIFICATION LABEL (see next
page).
4. Remove the original Certification Label from the vehicle and attach in the designated area on the
application form.
5. Staple the photo of the original Certification Label (in its original location) to the application form.
6. Mail (DO NOT FAX) the completed application with the photo of the label to your Regional Office:
Attention: Replacement Certification and VIN Plate Request.
HINT: Your dealer “Non Vehicle Account” will be billed $25.00 for each replacement label.
HINT:
•

A replacement label WILL NOT be available if the old label does not accompany this request for
SOLD vehicles.

•

All replacement Certification Labels for damaged vehicles are subject to approval by the
Technical Compliance Department. If you have any specific questions contact your Vehicle
Operations Manager (VOM).

2/6

ITB09-063C

APPLICATION FOR REPLACEMENT
CERTIFICATION LABEL
REASON FOR REPLACEMENT:
Collision Damage
Other

Reason for replacement

VIN:

Attach original Certification Label here

HINT: A picture of the VIN and odometer mileage
MUST be included for label requests for UNSOLD
vehicles.

XXXXXX

HINT: A legible photo of the Certification Label before it is removed MUST also accompany this
application.

Dealer Code:

Telephone # :

Dealer Contact Person:
Dealer Name:
Address:
Signature (Parts and/or Service
Manager):
Mail (DO NOT FAX) the completed application with the photo of the label to your Regional Office: Attention:
Replacement Certification and VIN Plate Request.
NNA Internal Use

VOM Name (Print)

VOM Signature
3/6

ITB09-063C

VIN PLATE / LABEL REPLACEMENT CRITERIA
HINT: See page 2 for replacement Certification Label.
A replacement VIN Plate/Label may be requested ONLY if:
•

The vehicle is in a collision and the VIN plate/label is damaged.
or

•

The vehicle was recovered after being stolen and the VIN plate/label is damaged but still available.

REQUESTING A REPLACEMENT VIN PLATE / LABEL
1. Completely fill out a copy of the APPLICATION FOR REPLACEMENT VIN PLATE / LABEL (see next
page).
2. Remove the original VIN Plate/Label from the vehicle and attach in the designated area on the application
form.

• The original VIN plate/label MUST accompany the application.
•

For a VIN Label that will destroy itself when removed:
Ø A photo of the original instrument panel VIN Label must accompany the application.
Ø A photo of the Certification Label (on the B-pillar) clearly showing the VIN must also
accompany the application.

•

Stolen VIN plate/label:
Ø If a VIN Plate/Label is stolen, contact the appropriate State Police or State Department of
Motor Vehicles (DMV). In most cases, the State DMV will issue a unique VIN so the original
VIN can be included on stolen vehicle listings. If this is the case, a replacement VIN plate/label
is NOT available from Nissan. However, the original VIN, not the state issued VIN, must be
used on all warranty claims.

3. Mail (DO NOT FAX) the completed application with the photo of the label to your Regional Office:
Attention: Replacement Certification and VIN Plate Request.
HINT:
•

Your dealer “Non Vehicle Account” will be billed $25.00 for each replacement VIN plate/label.

•

All replacement VIN plates/labels are subject to approval by the Technical Compliance
Department. If you have any specific questions, contact your Vehicle Operations Manager
(VOM).

4/6

ITB09-063C

APPLICATION FOR REPLACEMENT
VIN PLATE / LABEL

REASON FOR REPLACEMENT:
Collision Damage
Other

Reason for replacement

VIN:

Attach original VIN Plate / Label here

XXXXXX

XXXXXX

Dealer Code:

Telephone # :

Dealer Contact Person:
Dealer Name:
Address:
Signature (Parts and/or Service Manager):
Mail (DO NOT FAX) the completed application with the photo of the label to your Regional Office: Attention:
Replacement Certification and VIN Plate Request.
NNA Internal Use

VOM Name (Print)

VOM Signature

5/6

ITB09-063C

AMENDMENT HISTORY
PUBLISHED DATE

REFERENCE

November 18, 2009

ITB09-063

August 15, 2011

ITB09-063A

April 13, 2016

ITB09-063B

April 13, 2026

ITB09-063C

DESCRIPTION
Original bulletin published
Changes have been made on page 2 and at the bottom of
pages 3 and 5
Changes have been made to pages 2-4
Steps 1 and 2 revised on page 2; HINT added on page 3;
line art revised on pages 1, 3, and 5

6/6

ITB09-063C