BULLETIN NOTES
APPLICABLE MODEL(S)/VINS
2026 CX-5
DESCRIPTION
The 2026 CX-5 has new and revised features that are different from previous models and may be difficult to understand.
This Service Alert provides valuable information to support potential dealer and customer concerns.

Section Contents
New Features
Google Built-In

Page 1 of 23

02/18/2026 10:29 AM tlawrenc

• With Google built-in you can use content without operating your smartphone.
• With Google built-in, applications such as Google Assistant, Google Maps and more via Google Play are
seamlessly integrated. Refer to the cars with Google built-in help center for details. (See Google.)
• The navigation function can be used via Google Maps.
• Applications and vehicle functions can be controlled by voice via Google Gemini or Google Assistant.
• Additional applications can be Installed via Google Play.
• With Google built-in, connectivity is necessary via the Wi-Fi client function or the Connected Service function.

Service Information
• Go to MGSS Google built-in
• See Google

Google Built-In Status Bar

Page 2 of 23

02/18/2026 10:29 AM tlawrenc

If a Bluetooth® device is not connected or it is connected but the battery status cannot
be obtained, the icon is displayed.
The icon displays “ROAM” with roaming connected*1.
If a Bluetooth® device is connected and the battery status can be obtained, the battery level is
displayed.
The icon displays “ROAM” with roaming connected*1.
If you have not subscribed to the onboard communication unit, the icon is displayed.

If you have already signed up for the onboard communication device, the
communication status is displayed.
If there is an OTA notification or while software is being downloaded or installed, the icon is
displayed.

If there is a service check-in notification, the icon is displayed.

If there is a recall notification, the icon is displayed.

The Qi*2 operation status is displayed.

The Wi-Fi connection status is displayed.

Page 3 of 23

02/18/2026 10:29 AM tlawrenc

*1 For the roaming connection status, refer to the user instructions for your Bluetooth® device.
*2 For details on Qi, refer to the Owner’s Manual.
Service Information
See Owner's Manual --> Status Bar

User Registration
Creating a Profile
When using Mazda Connect for the first time, the initial setup flow is displayed.
Select the language you want to use in Mazda Connect and follow the instructions on the initial setup flow screen
display to proceed with the setup.
Language Selection

Mazda Connected Vehicle Services Setup
There are several types of connected services available via Mazda Connect. Some services may require you to
download the MyMazda app to your smartphone and subscribe to the services, while others may require you to
pair your smartphone to the vehicle via Bluetooth®. In addition, on a regular basis your vehicle will automatically
transmit certain geo-location, driving behavior data, and vehicle health information to Mazda for product quality,
data analysis, research, and product development. Using the QR codes or URLs below, refer to the Connected
Service Owner's Manual and Privacy Policy for more details and opt-out options.

Page 4 of 23

02/18/2026 10:29 AM tlawrenc

Profile Name
Enter your Profile name, then select "Next".

Google Terms of Use

Page 5 of 23

02/18/2026 10:29 AM tlawrenc

Scroll down to "Google Assistant". "Hey Google" default is off. The recommendation is to turn on "Hey Google" as
shown below:

Select "Accept".

If the user did not turn on "Hey Google" after selecting "Accept", the system will notify the user that it is turned off.
The recommendation is to "Turn on" as shown below:
Page 6 of 23

02/18/2026 10:29 AM tlawrenc

Google Account
You may need to log in to your Google Account when using Google Gemini or Google Assistant, Google Maps, or
Google Play.
If necessary, create a Google Account and log in.

Perform the log in operation following the instructions displayed on the screen.
Driving Position Assist
Driving Position Assist is a feature that can suggest ideal driving position settings. If you enable Driving Position
Assist, you will be asked to enter your height and the camera in your vehicle will automatically detect the center of
your face to determine
the position of your head. The vehicle then uses this information to adjust the position of your seat, Active Driving
Display, and outer mirrors, so you are in a better position for driving. No personal information is stored related to
this feature unless you choose to create a Driver Profile as detailed above; if you create a Driver Profile
your ideal driving position settings will be stored with your Driver Profile. This is a convenience feature and you
can adjust vehicle settings manually instead of using the camera.

Page 7 of 23

02/18/2026 10:29 AM tlawrenc

Driver Recognition
The Driver Personalization System uses the driver monitoring camera to convert the driver's facial features into
numerical information. The driver monitoring camera does not store or share images, audio, or video.

Bluetooth® Set Up

Page 8 of 23

02/18/2026 10:29 AM tlawrenc

1. Tap on the navigation bar (A).
2. Tap “Bluetooth® & Phone Connectivity” (B).
3. Tap “Pair New Device” (C).

4. Follow the instructions on the screen to connect a portable audio device or mobile phone to Bluetooth®.
Profile Lock
Lock settings for each user profile can be performed.

Page 9 of 23

02/18/2026 10:29 AM tlawrenc

Restore User Settings
Erases all data and restores all factory default settings.

Service Information
• Go to Mazda Connect Owner's Manual Page 1-2
• Go to Connected Service Owner's Manual

Cockpit Domain Controller
The cockpit domain controller (CDC) (3) controls the entire system such as communication between mobile
devices and Bluetooth ®, and the sending/receiving of video/audio signals from units related to the entertainment
system.

Page 10 of 23

02/18/2026 10:29 AM tlawrenc

1 Internet
2 Mobile device such as smart phone or Bluetooth ®·Enabled device
3 Cockpit domain controller (CDC)
4 Center display
5 USB port/sd card slot hub *1
6 Integrated sound processing unit (ISPU)
7 SD card *1
*1:Some models.
Service Information
Go to MGSS COCKPIT DOMAIN CONTROLLER (CDC)
Related Video Cockpit Domain Controller (CDC) Log Data Retrieval

Data Communication Module (DCM)
The data communication module (DCM) (1) communicates with various antennas and controls the telematics
communication system.

Page 11 of 23

02/18/2026 10:29 AM tlawrenc

Service Information
Go to MGSS
• DATA COMMUNICATION MODULE (DCM)
• TELEMATICS COMMUNICATION SYSTEM

Data Communication Module (DCM) Backup Battery
• If the data communication module (DCM) detects an open circuit in the main battery, it switches to power
supply from the built-in backup battery and continues operation.
• The data communication module (DCM) monitors the backup battery for deterioration, low charge level, and
failure.
• If an automatic call is made, the built-in battery power may be depleted and emergency calls may not be
possible in the event that an emergency occurs again. After an automatic emergency call has been made,
replace the built-in battery.

Page 12 of 23

02/18/2026 10:29 AM tlawrenc

Service Information
Go to MGSS
• DATA COMMUNICATION MODULE (DCM) BATTERY REMOVAL/INSTALLATION
• EMERGENCY CALL SYSTEM

Emergency Call System
The emergency call system is a system which reports the location of an accident occurring with the vehicle and
vehicle information to a call center to assist in a prompt emergency rescue in an emergency situation such as an
accident or sudden illness occurring while driving.

Service Information
Go to MGSS EMERGENCY CALL SYSTEM

Over The Air (OTA) Update
• By transmitting and receiving the information required for software update via the data communication

Page 13 of 23

02/18/2026 10:29 AM tlawrenc

module (DCM) between the cockpit domain controller (CDC) and the OTA center, update request
notifications or update operations for the target module are carried out at the appropriate time.
Periodic check function
• The cockpit domain controller (CDC) will automatically send vehicle information to the OTA center when
main power is switched to ON if seven days have elapsed since the last transmission of vehicle information
to the OTA Center.
Campaign notification display function
• A campaign notification message will be displayed at the top of the center display screen for a set period of
time when all of the following conditions are met.
― There is a module eligible for OTA software update *
― Notification data download is completed
― Vehicle speed is 0 km/h {0 mph}
*:The target modules vary depending on the market.
• If the campaign notification has not been opened, the campaign notification display function will remind the
user when the main power is switched ON 5 days after the initial notification.
• To view the message after it has finished displaying, swipe down on the top of the center display or tap the
icon on the upper left of the screen to display the notification list, as shown below.
• Once the screen is tapped to view the information, it will be removed from the notification list.

Service Information
Go to MGSS TELEMATICS COMMUNICATION SYSTEM --> OTA software update

Over The Air (OTA) Error Message/Error Code
An error message and/or error code is displayed during software updates.
Page 14 of 23

02/18/2026 10:29 AM tlawrenc

Service Information
Go to MGSS AN ERROR MESSAGE IS DISPLAYED DURING SOFTWARE UPDATES [OVER THE AIR [OTA]
REPROGRAMMING]

Stolen Vehicle Assistance
If your vehicle is stolen/missing, use the MyMazda APP to request assistance from a Stolen Vehicle Assistance
operator. The operator will obtain the vehicle's location information and contact the police with the location
information when a report is made using the MyMazda APP. The police will begin confirming and searching for the
vehicle and, if found, you will receive the search results from the police.

Service Informatin
Go to Connected Service Owner's Manual

Connectivity Service Period
Free Trial

Connected Vehicle + Emergency Call System/Stolen Vehicle Assistance + Google Built-In

Page 15 of 23

02/18/2026 10:29 AM tlawrenc

Free Trial – First Year
Connected Vehicle - Vehicle Health Screen Only
Free Trial – Following 9 Years, Only Used When there is No Paid Tier Subscription
Connected Vehicle + Emergency Call System/Stolen Vehicle Assistance
Paid Tier 1 – Available After First Year
Paid Tiers
Connected Vehicle + Emergency Call System/Stolen Vehicle Assistance + Google Built-In
Paid Tier 2 – Available After First Year

SD Map Card
The SD map card is for i-ACTIVSENSE systems such as:
• Traffic Sign Recognition System (TSR)
• Lane Change Assist
• MAZDA RADAR CRUISE CONTROL WITH STOP & GO FUNCTION (MRCC WITH STOP & GO
FUNCTION)

Note:
• The SD map card is not used for Navigation Guidance
• If the SD map card is removed, some ADAS functions will be restricted.
Service Information
See Owner's Manual --> USB Audio

Steering Switch
• Operation of the entertainment system and changing of the trip computer system display are possible without
a change in driving posture.

Page 16 of 23

02/18/2026 10:29 AM tlawrenc

• The steering switch is a button that combines capacitive type and tactile switch mechanisms.

Service Informatin
Go to MGSS Steering Switch

Driver Monitoring (DM) System
The driver monitoring (DM) detects the state of the driver (looking away, drowsiness level) by the camera inside
the vehicle. If the system determines dangerous driving, it alerts the driver and promotes safety by a warning
display and warning sound.

Service Information
Go to MGSS DRIVER MONITORING (DM)

Apple CarPlay/Android Auto USB-C Wired Connection
Apple CarPlay/Android Auto USB-C wired connection is on the left side of the USB Hub as indicated below.

Page 17 of 23

02/18/2026 10:29 AM tlawrenc

Service Information
Go to Owner's Manual --> Mazda Connect

Maintenance Notification
The maintenance notification function alerts drivers of maintenance needs by turning on the wrench indicator light
and displaying a message in the instrument panel. The following information describes the normal operation of
notification on the new 2026 CX-5 (KM).
A message appears on the instrument panel when the remaining distance to the engine oil change reaches 600
miles.

Tripmeter Location Change
• The odometer and tripmeter are not displayed in the instrument cluster.
• The odometer and tripmeter are displayed in the Center Display --> "Efficiency" application. Other fuel
economy information is provided.

Page 18 of 23

02/18/2026 10:29 AM tlawrenc

Service Information
Go to Owner's Manual --> Efficiency

Service Information
PDI Fuse Location
Fuse to be Installed at PDI
Fuse F1 (25A) is removed from the engine compartment fuse block and is stored on the engine compartment fuse
block lid.
Fuse Block (Engine Compartment)

Page 19 of 23

02/18/2026 10:29 AM tlawrenc

Front of vehicle
NOTE:
• Make sure the fuse is fully installed into position and flush with all of the other fuses.
• Check for the Connected Vehicle signal after installing fuse F1. The connectivity signal bar looks like a
vertical stack bar on the top left of the screen and should be white as shown below to be working properly.

Page 20 of 23

02/18/2026 10:29 AM tlawrenc

Mazda Connected Vehicle Viewer (MCVV)
The Mazda Connected Vehicle Viewer (MCVV) enhances the Mazda ownership experience by providing Mazda
Service Advisors, Technicians and Call Center Associates access to real-time vehicle status information alerts for
applicable Mazda connected vehicles.
This powerful tool allows you to proactively understand and diagnose customer concerns and resolve potential
issues, demonstrating how well you know the customer’s vehicle while establishing your readiness and willingness
to assist.

Service Information: MAZDA CONNECTED VEHICLE VIEWER USER GUIDE (MCVV)

Page 21 of 23

02/18/2026 10:29 AM tlawrenc

Mazda Connected Vehicle Maintenance Mode
Before servicing a customer's vehicle, always put it in connected services disable mode or connected vehicle
maintenance mode.
• Connected services disable mode is a mode that temporarily stops the communication functions other than
the emergency call function for the vehicle according to the GDPR (General Data Protection Regulation).
• Connected vehicle maintenance mode is a mode that restricts a part of communications such as the
MyMazda App function.
• Switching to connected services disable mode or connected vehicle maintenance mode prevents the
customer from being notified of the vehicle condition while it is being serviced or the customer making a
remote operation while the vehicle is being serviced.
Cancel connected services disable mode after completing vehicle service.
Service Information
Go to MGSS SERVICE CAUTIONS FOR VEHICLES WITH TELEMATICS COMMUNICATION SYSTEM

12V Battery Disconnect
After a 12V battery replacement, perform the following procedures:
1. OPERATION AFTER REPLACING 12 V BATTERY
2. 12 V BATTERY CONDITION INITIALIZATION SETTING (i-stop SETTING)
3. POWER LIFTGATE (PLG) SYSTEM INITIALIZATION PROCEDURE
4. POWER OUTER MIRROR SYSTEM INITIALIZATION PROCEDURE
Note: Google Assistant "Guest Profile" may be delayed. User will need to wait for language packet download
(about 100MB).
Service Information
Go to MGSS 12 V BATTERY REPLACEMENT [PYU (WITH i-stop)]

Mazda Diagnostic and Repair Software II (MDARS II)
• 2026 CX-5 exclusively uses MDARS II
• MDARS II can only be used with the Denso Scan Tool (DST)
• Information regarding MDARS II can be found in MGSS > M-MDS Tab

Tutorial Videos
• Cockpit Domain Controller (CDC) Log Data Retrieval
• Diagnostic Assist Function (CDC)

Page 22 of 23

02/18/2026 10:29 AM tlawrenc

• MDARS II Installation Video

Page 23 of 23

02/18/2026 10:29 AM tlawrenc