L74XA.01.26

To:
Subject:
Date:
Pages

After Sales Official Network
Gas spring bracket tightening
22/01/2026
3

Campaign code:
L74X-A.01.26
Campaign name:
Gas spring bracket tightening
Model:
Revuelto

Information for the service network:
During ongoing product monitoring, Automobili
Lamborghini S.p.A. requires to retighten gas
spring bracket nuts

Model Year:
2024, 2025
Markets:
All

Solution for the field:
Retighten gas spring bracket nuts

VIN Involved:
Until VIN SLA03687
Important information: before proceeding with
the repair, connect to the Warranty Portal and,
using the “VIN Info” function, check that:
•

the vehicle is actually affected by the
instructions contained in this bulletin.
NOTE: some vehicles may not be affected,
despite the fact that their Vehicle
Identification Number (VIN) falls within the
range;

•

NOTE:
Operation A will be available only when the
instructions require a preliminary check to be
performed to determine whether or not the
vehicle actually needs updating.

only replacement parts that correspond to
the specific operation, identified by a
letter (such as A, B, C, etc.), are to be used
for the chassis being repaired.

Spare Parts:
None.
Management of replaced parts:
Store the components that have been removed
from the vehicle in an appropriate manner,
marking them with their corresponding bar codes
so that they can be identified during visits by the
competent Area Manager.
Labor time:
Operation B: 0.1 h
Previous bulletins superseded.
None.

Example

Rev.00

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

1/3

L74XA.01.26

To:
Subject:
Date:
Pages

After Sales Official Network
Gas spring bracket tightening
22/01/2026
3

Warranty claim instructions:
To request reimbursement for the repair
performed, access the “LIASS” system on the
Lamborghini
portal
and,
following
the
instructions in the system’s “Manuals” section,
generate and fill out a Warranty Request.
Select the required campaign and proceed with
entry; carefully read the options present in the
alert message that displayed by the system (see
example) and select the option performed on the
vehicle.

Tools/Materials required:
Reimbursement will be structured as follows, on
the basis of the operation performed:
-

OPERATION B:
o Steps to be executed: 1
o Labour time: 0.1 h

Code
n\a

Description.
n\a

Q.ty
n\a

NOTE:
All O.D.I.S. Service technical documentation can
be viewed on the app “O.D.I.S. Self Service Guide”
available on Lamborghini HUB portal.

Important information:
attach all documents generated during the work
carried out, evidence of the work itself, for
instance work orders and diagnostic protocols
with BETA-Reports.
If one or more of these is missing, it may lead to a
rejected reimbursement request.
Fill out the page in the warranty booklet
(identified in the image below) in the section
“Service and Recall Campaigns”:

Rev.00

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

2/3

L74XA.01.26

To:
Subject:
Date:
Pages

After Sales Official Network
Gas spring bracket tightening
22/01/2026
3

Repair method:
OPERATION B:
Open front bonnet and tighten to 12 Nm (8.85
ft⋅lb) nuts circled in below image
IMPORTANT:
The documents which must be provided together
with the operation under warranty request are:
-

Produced Repair Order

-

Saved Diagnostic Protocol wirh BETA
report

Failure to follow these procedures could lead
to the request being rejected.

For more information, please contact your Area
Manager or open a ticket to Technical Support in
Lamborghini KEY (Request – General Information
– After Sales Services - After Sales Technical
Support).

Regards,
Lamborghini Service

Rev.00

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

3/3