NHTSA ID Number: 11027562
Manufacturer Communication Number: T-SB-0094-25
TSB/Document Date: 2026-01-09
Summary
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: •Careful inspection for paint chips/scratches and body dents/dings. •Proper operation of electrical accessories (including interior light, clock, and radio reset). •Interior cleanliness. •Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota
Warranty Policy. •GTS+ Health Check •Completed PDS Check Sheet •Battery Charge Test Print Out •GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are, and have always been, a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year Mirai vehicles. Refer to T-SB-0023-25, the universal Check Sheet that contains PDS steps that apply to all 2026 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0009-25, Long-Term Vehicle Storage Guidelines.
NOTE
Attachment point “A” is used for installation
of the mounting bracket to the
radiator grille.
Attachment point “B” is used for the
installation of the front license plate to the
mounting bracket.
B
B
A
A
1
2
2. Screw the two self-tapping screws directly
into the dimples to install the front license
plate mounting bracket.
NOTICE
Do NOT pre-drill holes in the dimples.
Do NOT overtighten the
self-tapping screws.
3. Install the mounting bracket to the radiator
grille using two self-tapping screws.
Draft - Confidential
3
A
Attachment point “A” for Mounting Bracket
B
Attachment point “B” for License Plate
1
Mounting Bracket
2
Dimples
3
Self-tapping Screws
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 7 of 13
2026 Mirai Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation (continued)
4. Install the front license plate onto the mounting bracket using two noncorroding bolts with the
following dimensions:
Length: 15.0 mm (0.59 in.)
Diameter: 6.0 mm (0.24 in.)
Figure 3.
Figure 4.
1
2
2
1
3
1
Length
1
Front License Plate
2
Diameter
2
Mounting Bracket
3
Draft - Confidential
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 8 of 13
2026 Mirai Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation
1. Remove the front and rear emergency
towing eyelets from the front and rear
bumpers by turning them counterclockwise.
Figure 5.
HINT
If it is difficult to loosen the emergency towing
eyelets, use a steel bar.
1
2
2. Place the removed front emergency towing
eyelet into the luggage tray in the
luggage compartment.
1
Front Emergency Towing Eyelet
2
Rear Emergency Towing Eyelets
Figure 6.
HINT
Dispose of the other removed emergency
towing eyelets.
1
1
Draft - Confidential
© 2025 Toyota Motor Sales, USA
Front Emergency Towing Eyelet
T-SB-0094-25
December 17, 2025
Page 9 of 13
2026 Mirai Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation (continued)
3. Install the front and rear emergency towing
eyelet hole covers, which are stored in the
glove compartment, onto the front and
rear bumpers.
Figure 7.
B
A
1
A. Insert the arrow-shaped part “A” of the
emergency towing eyelet hole covers
into eyelet holes “B” as shown.
B
A
B. Install the front and rear emergency
towing eyelet hole covers into the holes
of the front and rear bumper.
Draft - Confidential
2
A
Arrow-shaped Part
B
Eyelet Hole
1
Front Emergency Towing Eyelet Hole Cover
2
Rear Emergency Towing Eyelet Hole Cover
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 10 of 13
2026 Mirai Pre-Delivery Service (PDS)
Front Wheel Opening Extension Pad Installation
The front wheel opening extension pad set (right and left front wheel opening extension pads and
six self-tapping screws) is stored in the luggage compartment at the assembly plant to avoid
damage in transit.
1. Hook the retainers of the left front wheel
opening extension pad through the
installation holes on the fender liner and
temporarily place the left front wheel
opening extension pad in the
installation position.
Figure 8.
HINT
There is a distinguishable mark on each pad.
2
1
2. Tighten the three self-tapping screws.
3. Repeat steps 1 and 2 for the right side.
Draft - Confidential
1
Self-tapping Screws
2
Front Wheel Opening Extension Pad
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 11 of 13
2026 Mirai Pre-Delivery Service (PDS)
Installation of Rubber Body Plugs
1. Confirm the number of plugs in the glove box. If two plugs are present, perform
substep 2A ONLY. If four plugs are present, perform substep 2A AND substep 2B.
2. Install the plugs according to the instructions below by confirming the number of plugs in the
glove box.
A. Install two plugs in the rear side member hole or rocker inner hole as shown.
B. Install two plugs in the torque box hole or rocker inner hole as shown.
Figure 9.
6
1
3
2
4
5
6
1
Front Side
4
Rear Side Member Hole or Rocker Inner Hole
2
Rear Side
5
Rocker Inner
3
Torque Box Hole or Rocker Inner Hole
6
Install Plug Here (if Applicable)
NOTICE
The installation of these plugs is required to prevent rust.
These plugs are stored in the glove box.
The number of plugs may vary according to production locations in the same
vehicle model.
Draft - Confidential
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 12 of 13
2026 Mirai Pre-Delivery Service (PDS)
Tire Pressure Warning System (TPWS) Initialization
Refer to the applicable Repair Manual for the TPWS initialization procedure.
2026 Mirai:
Suspension – Tire Pressure Monitoring – Tire Pressure Warning System – Initialization
NOTE
When the outside temperature is significantly colder than the shop’s temperature, or there is a
significant ambient temperature change overnight, use GTS+ to determine the proper tire pressure.
From the Health Check Result Status pane, select the refresh button within the Compensation
Pressure data display.
This model has four TPWS sensors.
Head Unit System Reset
Prior to vehicle delivery confirm radio displays the welcome screen with language options when
Ignition is ON.
If the welcome screen with language options does not display complete the following steps:
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Enter the Following menus: Settings – Info & Security – Info & Security Reset.
3. Select yes when the system reset dialogue box appears.
4. Cycle engine switch (power switch) OFF – On to confirm welcome screen appears.
Draft - Confidential
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 13 of 13
2026 Mirai Pre-Delivery Service (PDS)
Dealer Contact Information for Call Dealer Head Unit Function (Premium Audio Only)
Refer to the Multimedia System Owner’s Manual to add dealer contact information.
2026 Mirai:
Section 2-8 Vehicle Settings – Setting Dealer Information
Navigation — Set Date & Time by GPS
Prior to vehicle delivery, it is necessary to turn the Set date & time by GPS setting to the
ON position.
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Navigate the following menus in the head unit: Settings – General – Date & Time –
Set Date & Time by GPS.
3. Ensure the Set date & time by GPS function is set to the ON position.
Draft - Confidential
© 2025 Toyota Motor Sales, USA
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-06-29 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0094-25
Replacement Service Bulletin Number:
MFR Communication Date: 2025-12-17
MFR Internal Campaign ID/Software Version: T-SB-0094-25
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.