A Connection offline

Technical Service Bulletin Transaction No.: 2079980/2
91 MMI software update, connectivity box for MIB3 vehicles (version MLB e-tron GT ST3BP with AED) Release date: Dec 4, 2025
Condition
Model(s) Year(s) VIN Range Vehicle Specific Equipment
Software Version:
- - 4026
e-tron GT, and RS e 2024 All
tron GT 4014
With 1U4 4404
e-tron GT 000001 — 000830 Software version:
2025
RS e-tron GT 900000 - 900949 4318
REVISION HISTORY
Revision | Date Purpose
2 - Revised Service (Updated PR and SVM code)
1 11/17/2025 | Initial publication
Customer states:

There may be problems with various MMI functions or “Emergency call fault” may be displayed in the instrument cluster.

Workshop findings:

The vehicle still has one of the following software versions in diagnostic address 5F: 4014, 4026, 4318, 4404.

A different TSB may have instructed you to refer to this TSB in the context of a software update for multiple control units.

Technical Background

Software issues.

Production Solution

The new software for the affected control units was implemented in production in model year 2025.

Service

Important information before updating the software

Diagnostic entries logged in diagnostic address 0075 will be repaired by a software update described in this TSB. The Guided Fault Finding test
plans should not be carried out and cannot be invoiced.

A lengthy period of inactive time is to be expected during the software update. You can work on a different vehicle during this time. This is considered
in the warranty accounting instructions.
ven carrying out this TSB, time stamps are not required for billing under warranty.

Anewly developed test program is used to input the SVM code. Please ensure that the tester being used has the latest ODIS update. The new test
program for software updates is included in ODIS software.

Note: The vehicle uses acoustic signals and flashing lights to indicate when user input is required during and at the end of the test program.

Asecond USB-C stick is required for the software update for the Android control unit (see parts information for part number). This update must only
be performed if the software version in diagnostic address 078E is below 0621.

Important: Please prepare the required USB-C sticks (see parts information) before starting the repair. The update media can be used for multiple
vehicles.

This update package also includes new software for the MIB3 infotainment system. Useful information for MIB3 software updates can be found in
TSB 2060523, 97 MIB3: Software Update Instructions.

Repair procedure

1. Manual software update for AED control unit (078E) via red menu

Please skip step 1 if the Android control unit (078E) already has software version 0621.

The AED control unit can only be updated via the red menu in the MMI.

Insert the USB update medium in the USB connection (see parts information for part number).
Select the red menu by pressing the following buttons:

Select “Update” and the source in which you have inserted the update medium (USB connection). Use the volume control to do this. All control units to be
updated (AED) are shown; scroll all the way down and start the update.

Once the manual update has been successfully completed, leave the red menu entirely before starting a diagnostic session.

The MMI will now restart.
Wait until the MMI has fully initialized. The home screen must be complete and display all apps.
Please restart the system by pressing and holding the volume control for 10 seconds.

Open the notification center and switch to the “Audi connect notifications” tab.

— 5 aa PIR 0) L023

SA Benachrichtigungen Se Connect Benachrichtigungen

Keine Benachrichtigungen

It may take several minutes for further information to appear. Please wait.

SRI
— Parr

via =y-rnr-Taatatensrelelale|=ia 3 Connect Benachrichtigungen
OTA Updater Service

Software Update
Software Update 0621 (814MB) wird heruntergeladen.

Please note: This procedure will only work if the USB stick is still inserted.

Please wait (approx. 5 min.) until the download is complete.

o oe ges 13:16

|_| % 26.09.2025

L\ Benachrichtigungen 82. Connect Benachrichtigungen

OTA Updater Service

Software Update
Download des Software Update beendet.
Ein Neustart ist erforderlich.

Please restart the system by pressing and holding the volume control.

Check whether the update was successful by calling up the notification center / Audi connect notifications.

Se

()
Fa

ele)

L\ Benachrichtigungen 66 Connect Benachrichtigungen

OTA Updater Service

Software Update
Gratulation! Software 0621 wurde erfolgreich installiert

Vielen Dank!

2. SVM code for AED control unit, software update for emergency call module (0075), gateway (0019) and information electronics (005F)

Use the function “SVM - Authorized Multiple Code Entry” in “Flash” mode.

For the new software update program, the following SVM code must be entered exactly, including commas and without spaces
(recommendation: scan QR code with hand-held scanner or copy and paste the SVM code chain).

Different SVM code chains / QR codes are required depending on the market and the software version of the gateway (0019).

in the function “SVM — Authorized Multiple Code Entry”

You must then use the appropriate SVM code chain for the determined software version in the function “SVM — Authorized Multiple Code Entry’.

Only SW0042 in diagnostic address 0019

All other software versions in diagnostic address 0019
078EA001,DUCDTCPR0075MLB,FLIGHTON0075MLB,ZGDOIP,CL3BPA001US, TGU1MDMVB,CL3BPA002US,FLIGHTOFF0075MLB

The test program initially prompts you to use a USB medium (see parts information for part number).
The USB-C stick can be removed after completing the program.

Note: If the procedure has been interrupted, please repeat step 2. The test program will then automatically perform the missing part of the update.

3. Bus sleep mode

Put the vehicle in bus sleep mode after performing the software update.

Then switch the ignition back on and start the MMI.
4. Check emergency call LED

Check whether the emergency call LED in the roof module lights up in green again.

If the LED does not tum green, please refer to TSB 2079652 Emergency call LED in roof module not lit up in green.

5. End diagnostic session and send off diagnostic log online.

Warranty

Claim Type: * — If the vehicle is outside of any warranty, this Technical Service Bulletin is informational only.

Service Number: Complaints about emergency call function or online services
Service number: 9145

Complaints about MMI functions

Service number: 9196

Damage Code: 0041
Labor Operations: Prepare repair 0151 0010 20 TU
- Vehicle parked

- Charge 12 V battery

AED update (manual) 0151 0040 100 TU
(value in brackets applies if step 1 was skipped) (60 TU)

Launch software update for MMI and emergency call module
- Connect tester, start ODIS

- Flash mode

- Function Authorized Multiple Code Entry

- Copy/paste the code chain ==> Start

- Insert the USB stick.

- Program runs automatically (service technician is not required)

Conclude software update

- End the current test program
- Remove the USB stick

- Bus sleep cycle

- Check emergency call LED

- Quit the diagnostic session

- Disconnect charger

Claim Comment: As per TSB 2079980/2

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or
audit by Audi Warranty.

When carrying out this TSB, time stamps are not required for billing under warranty.
You are therefore permitted to work on other vehicles at the same time. The update can also be performed by non-productive personnel.

The Guided Fault Finding test plans should not be carried out for diagnostic entries that are repaired by performing this TSB and cannot be invoiced.

Required Parts and Tools

The following applies when creating the update media:

Please prepare the 2 required USB-C sticks before starting the repair.

You must not use an SD card with an adapter USB stick.

The USB-C stick and downloading the software via the FMC cannot be invoiced.

General information on USB-C sticks for software updates can also be found in TSB 2060523 91 MIB3: Software Update Instructions.

AED control unit update media:

Vehicle type Part number

All models 8W0906961DQ

MIB3 update media:
Download the software with the corresponding part number onto a USB-C stick (USB 2.0, 32 GB).
Please do not use a USB-C stick with a larger storage capacity as such USB sticks have a different formatting process.

Vehicle type MIB3 SW version | Part number
Audi e-tron GT 4014 8W0906961GB
4026
4404
Audi e-tron GT 4318 8W0906961GF

Additional Information

All part and service references provided in this TSB (2079980) are subject to change and/or removal. Always check with your Parts Department and/or
ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during

the repair.

©2025 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of
printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are
reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without

the prior expressed written permission of the publisher.