SERVICE BULLETIN
Subject:
MODESTY PANEL VIBRATION PROBLEM
IMPROVEMENT

Bulletin Type: FM

Bulletin No: TS45-FM-2506

PQR No: 500000007941

Rev No: 01

Ref. No: 700004765

Vehicle Model: TS45

Flat Rate Time / Code: 2 ad/sa

Date of issue: 28.08.2025

Modify Before: 28.08.2028

What to do with off coming parts:

What to do with outstanding parts of previous
revision:

☐Scrap
☐Return
☐Use with additional parts
☐On consignment
☒No off coming parts

☐Scrap
☐Return
☐Use with additional parts
☐On consignment
☒No outstanding parts

Description of the modification: It was
prepared to prevent the vibration problem
experienced in the modesty panel.

Bulletin Responsible: BURAK BERKAY AKSOY

Published & Approved By: ESİN ARISOY

SERVICE BULLETIN
SAFETY INSTRUCTIONS
1. Mechanical Requested Dress Code
WARNING:
➢ Dress properly to avoid personal injury and damage to the
vehicle
Always wear protective clothing
Do not wear any worn or loose-fitting clothing
Remove jewelry before starting to work
In case of long hair, use hairnet
The illustration on the left shows some of the correct and
incorrect clothing
✓ Sharp edged items should be avoided in order not to
scratch vehicle (i.e. belts, watches, necklace)
✓
✓
✓
✓
✓

2. Protect Seats when Mechanic Starts Working

✓ Seats, trimming, upholstery stuff and carpeting should be
protected with appropriate coverings.

3. Welding on the Chassis
a. Always disconnect the batteries (starting with the negative lead).
b. Disconnect the connectors of electrical and electronic equipment (electronic control
units, sensors and actuators) if they are less than 2 meters away from the chassis
part to be welded or the earth terminal of the welding equipment.
c. The earth terminal should never be attached to vehicle components such as engine,
axles and springs. Arcing on these parts is not permitted, because of the risk of
damage to bearings, springs, etc.
d. The earth terminal must make good contact and be placed as close as possible to
the part to be welded.
e. Plastic pipes, rubber parts and parabolic springs should be well protected against
welding spatter and temperatures higher than 70°.
f. The contact switch must not be in the accessory or contact position. The contact key
should be removed.
g. Reconnect in reversed order of disconnecting. Ensure that a good earth connection
is made between chassis, engine and cab.

SERVICE BULLETIN
INPUT PARTS;

Picture

QUANTIT
Y

No

Part No

Part Name

1

Dummy Part

Modesty Panel handle

1

2

TF201605Y

BOLT (M8x1,25x50-8,8)

2

3

BCMF06040A50Y

BOLT,M6X1X40 (TORX)

3

4

9207-193Y

BUSHING, MODESTY PANEL

3

SERVICE BULLETIN

CURRENT MODESTY PANEL

New design modesty panel
handle sent to the field.

SERVICE BULLETIN
Installation manual,

1- Drill and Thread
M6 drill should have a
diameter of 5mm.
A hole with a diameter of Ø5 mm and a depth of
45 mm shall be drilled into the part.
An M6 x 1 metric thread shall then be tapped to a
depth of 30 mm within the drilled hole.

M8x drill should have a
diameter of Ø6 mm.
A hole with a diameter of Ø6 mm and a depth of 55
mm shall be drilled into the part.
An M8 x 1,25 metric thread shall then be tapped to
a depth of 40 mm within the drilled hole.

SERVICE BULLETIN
2- Bolt fastening and torque application ( TORK 14,7 Nm)

Place the handle as shown in the figure,
and complete the bolt connections

BCMF06040A50Y Tork 10.5Nm
9207-193Y Bushing

TF201605Y Tork 25.3 Nm

SERVICE BULLETIN
Şasi no
NLTEJXB91T1000673
NLTEJXB93T1000674
NLTEJXB95T1000675
NLTEJXB97T1000676
NLTEJXB99T1000677
NLTEJXB90T1000678

OTPA
OA19231
OA19240
OA19241
OA19242
OA19243
OA19244

NLTEJXB92T1000679

OA19307

NLTEJXB99T1000680

OA19308

NLTEJXB90T1000681

OA19325

NLTEJXB92T1000682

OA19326

NLTEJXB94T1000683

OA19327

NLTEJXB96T1000684

OA19328

NLTEJXB98T1000685

OA19329

NLTEJXB9XT1000686

OA19349

NLTEJXB91T1000687

OA19372

NLTEJXB93T1000688

OA19373

NLTEJXB95T1000689

OA19437

NLTEJXB91T1000690

OA19458

NLTEJXB93T1000691

OA19459

NLTEJXB95T1000692

OA19460

NLTEJXB97T1000693

OA19461

NLTEJXB99T1000694

OA19462

NLTEJXB92T1000701

OA19491

NLTEJXB90T1000695

OA19463

NLTEJXB92T1000696

OA19464

NLTEJXB94T1000697

OA19487

NLTEJXB96T1000698

OA19488

NLTEJXB98T1000699

OA19489

NLTEJXB90T1000700

OA19490

NLTEJXB94T1000702

OA19492

NLTEJXB96T1000703

OA19552

NLTEJXB98T1000704

OA19553

NLTEJXB9XT1000705

OA19554

NLTEJXB91T1000706

OA19555

NLTEJXB93T1000707

OA19556

NLTEJXB95T1000708

OA19557

NLTEJXB97T1000709

OA19582

NLTEJXB93T1000710

OA19583

NLTEJXB95T1000711

OA19584

NLTEJXB97T1000712

OA19585

NLTEJXB99T1000713
NLTEJXB90T1000714
NLTEJXB92T1000715
NLTEJXB94T1000716
NLTEJXB96T1000717
NLTEJXB98T1000718

OA19621
OA19622
OA19623
OA19624
OA19625
OA19632

SERVICE BULLETIN
Flat Rate Time / Code: 2 ad/sa