Service

Technical Information

2025

ENU

WSR3

7

WSR3 - Check Rear Right Side Trim Panel and Replace If Necessary (Workshop Campaign)
Model Line:

911 (992)

Model Year:

As of 2025 up to 2026

Concerns:

Rear right side trim panel

Situation:

On the affected vehicles, there is a possibility that the rear right side trim panel was not fully laminated.
Customers might consider this as a visual detriment.

Action:

Check rear right side trim panel and replace if necessary

Affected
Vehicles:

Only the vehicles assigned to the campaign (see also PCSS Vehicle Information).

Required parts
Information
No parts are required for checking the side trim panel.
The forecast failure rate is only 5%.
The rear right side trim panel and the associated parts are therefore only to be ordered in the event of a
fault.
Determine the variant of the rear right side trim panel required for the respective vehicle using the vehicle
identification number in the Porsche Spare Parts Catalogue (PET2).
The part numbers of the required parts for the respective vehicle can be viewed in the assigned scope. For
an overview of the campaign scopes, see: “Warranty processing”

Required tools
Information
No tools are required for checking the rear right side trim panel.
Tools:

•
•

P90999 - Porsche Tester 4
Battery charger with a current rating of at least 90 A and a current and voltage-controlled charge map
for lithium starter batteries, e.g. VAS 5908 battery charger 90 A. For further information about the
battery chargers to be used, see the corresponding Workshop Manual. ⇒ Workshop Manual '270689
Charging vehicle electrical system battery'

AfterSales

Nov 25, 2025
Page 1 of 6

7

Service
WSR3

ENU

•
•
•
•

Technical Information

2025

Torque wrench, 0.4-2 Nm (0.3-1.5 ftlb.), e.g. VAS 6253A - Torque wrench, 0.4-2 Nm (0.3-1.5 ftlb.)
Torque wrench, 2-10 Nm (1.5-7.5 ftlb.), e.g.V.A.G 1783 - torque wrench, 2-10 Nm (1.5-7.5 ftlb.)
Torque wrench 6-50 Nm (4.5-37 ftlb.), e.g. V.A.G 1331A - torque wrench 6-50 Nm (4.5-37 ftlb.)
Plastic wedge, commercially available

Checking rear right rear side trim panel
Work Procedure: 1

Check rear right rear side trim panel. ⇒ Rear right side trim panel

Rear right side trim panel
Assessment
( )

✗)
(✗

Nov 25, 2025
Page 2 of 6

Action

Lamination of rear right side trim
panel OK. (Lamination of the rear right
side trim panel up to the end of the
component is applied)

No further action required.

Lamination of the rear right side trim
panel up to the end of the component is
not applied.

Rear right side trim panel not OK.

AfterSales

Enter the campaign in the warranty and maintenance logbook.

Continue with: ⇒ Technical Information '270689
Replacing rear right side trim panel'

Service

Technical Information

2025

ENU

WSR3

7

Replacing rear right side trim panel
Information
Before starting repair work, the availability of the rear right side trim panel must be ensured.
Work Procedure: 1
2

Replace rear right side trim panel

⇒ Workshop Manual '707519A6 Removing and installing rear side trim panel'
Enter the campaign in the warranty and maintenance logbook.

Warranty processing
Information
For this campaign basically please always invoice for the scope applicable to this vehicle using a regular
campaign claim in WWS. This will ensure that the campaign is documented as Completed in the systems.
The material costs incurred additionally for the rear right side trim panel can then be invoiced using a reimbursement claim for the original campaign claim for this action.

Information
The specified labor times were determined specifically for carrying out this campaign and include all of the
necessary preliminary and subsequent rework. The labor times can differ from the labor time published in the
Labor Operation List in the PCSS.
Scope 1:

Checking rear right rear side trim panel
Labor time:
Checking rear right rear side trim panel

Labor time: 11 TU

Þ Damage number WSR3 066 000 1
⇒
Scope 2:

Check rear right side trim panel and replace if necessary
•
•

Vehicles without rollover protection bar (M-No. 2Y0)
Vehicles without full bucket seats (M-No. Q1K)

AfterSales

Nov 25, 2025
Page 3 of 6

7

Service
WSR3

ENU

Technical Information

2025

Labor time:
Check rear right side trim panel and replace if necessary
Includes:
Removing and installing rear side trim panel
Removing and installing B-pillar trim panel
Removing and installing C-pillar trim panel
Removing and installing rear seat cushion

Labor time: 76 TU

Required parts:
...*

Rear right side trim panel

1 piece

N 91026201

Hexagon collar nut, M10

2 pieces

N 98925801

Cheese head bolt with multiple-tooth head 7/16”
20UNF x 42

2 pieces

PAF011175

Internal serration screw

8 pieces

PAF989256

Internal serrations adapter screw

2 pieces

*Determine the variant of the rear right side trim panel required for the respective vehicle using the vehicle
identification number in the Porsche Spare Parts Catalogue (PET2).
Þ Damage number WSR3 066 000 2
⇒
Scope 3:

Check rear right side trim panel and replace if necessary
•
•

Vehicles without rollover protection bar (M-No. 2Y0)
Vehicles with full bucket seats (M-No. Q1K)
Labor time:
Check rear right side trim panel and replace if necessary
Includes:
Removing and installing rear side trim panel
Removing and installing B-pillar trim panel
Removing and installing C-pillar trim panel
Removing and installing rear seat cushion

Labor time: 143 TU

Required parts:

Nov 25, 2025
Page 4 of 6

...*

Rear right side trim panel

1 piece

N 91026201

Hexagon collar nut, M10

2 pieces

N 98925801

Cheese head bolt with multiple-tooth head 7/16”
20UNF x 42

2 pieces

PAF009057

Hexagonal fit bolt

2 pieces

AfterSales

Service

Technical Information
9A700748300

2025
External hexalobular screw

ENU

WSR3

7

8 pieces

*Determine the variant of the rear right side trim panel required for the respective vehicle using the vehicle
identification number in the Porsche Spare Parts Catalogue (PET2).
Þ Damage number WSR3 066 000 2
⇒
Scope 4:

Check rear right side trim panel and replace if necessary
•
•

Vehicles with rollover protection bar(M-NR. 2Y6 / 2Y9)
Vehicles without full bucket seats (M-No. Q1K)
Labor time:
Check rear right side trim panel and replace if necessary
Includes:
Removing and installing rear side trim panel
Removing and installing B-pillar trim panel
Removing and installing C-pillar trim panel
Removing and installing rear seat cushion
Removing and installing rollover protection bar
Remove and install front seat

Labor time: 183 TU

Required parts:
...*

Rear right side trim panel

1 piece

PAF989256

Internal serrations adapter screw

2 pieces

PAF011175

Internal serration screw

8 pieces

PAF104513

Cheese head bolt with internal multiple-tooth
head, M12 x 1.5 x 55

2 pieces

PAF912572

Hexagon flange bolt, M8 x 22

6 pieces

PAF910758

Cheese head bolt with multiple-tooth head, M10
x 30

4 pieces

*Determine the variant of the rear right side trim panel required for the respective vehicle using the vehicle
identification number in the Porsche Spare Parts Catalogue (PET2).
Þ Damage number WSR3 066 000 2
⇒

AfterSales

Nov 25, 2025
Page 5 of 6

7

Service
WSR3

Scope 5:

ENU

Technical Information

2025

Check rear right side trim panel and replace if necessary
•
•

Vehicles with rollover protection bar(M-NR. 2Y6 / 2Y9)
Vehicles with full bucket seats (M-No. Q1K)
Labor time:
Check rear right side trim panel and replace if necessary
Includes:
Removing and installing rear side trim panel
Removing and installing B-pillar trim panel
Removing and installing C-pillar trim panel
Removing and installing rear seat cushion
Removing and installing rollover protection bar
Removing and installing front seat (sports bucket seat)

Labor time: 253 TU

Required parts:
...*

Rear right side trim panel

1 piece

PAF009057

Hexagonal fit bolt

2 pieces

9A700748300

External hexalobular screw

8 pieces

PAF104513

Cheese head bolt with internal multiple-tooth
head, M12 x 1.5 x 55

2 pieces

PAF912572

Hexagon flange bolt, M8 x 22

6 pieces

PAF910758

Cheese head bolt with multiple-tooth head, M10
x 30

4 pieces

*Determine the variant of the rear right side trim panel required for the respective vehicle using the vehicle
identification number in the Porsche Spare Parts Catalogue (PET2).
Þ Damage number WSR3 066 000 2
⇒

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are
written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in
order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and
may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins
are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester
are the ones that must be followed.

© 2025 Porsche Cars North America, Inc.

Nov 25, 2025
Page 6 of 6

AfterSales