Warranty Field Campaign
Campaign Number: c7171

Revision:

Released Date: 14-Aug-2025
Expiration Date (U.S. and Canada): 30-Aug-2027
Expiration Date (International): 30-Aug-2027

X15N Wastegate Control Block and Calibration Update Campaign

Attention
U.S. / Canadian Dealers
U.S. / Canadian Distr./Branches and Div. Offices (Auto)
If additional information is required, please contact your Cummins Warranty Operations Group Leader.

Description
This Campaign is being issued to address a potential concern for engine performance relative to the Wastegate Control System functionality on certain X15N CM2380
X150B. This field action authorizes certified repair locations to replace the Wastegate Control Block to latest design and update the ECMs calibration on eligible engines.

Note : This field action provides retroactive coverage for repairs made in anticipation of and prior to the release of this publication.

Action
In order to qualify for repair under this field action, an engine:
1. will be covered Regardless of coverage status, and
2. must show as OPEN on QuickServe® Online for this field action.

Note : The ESN list is attached for reference.
After verifying that the engine meets the above requirements, perform the following actions:
1. Replace Wastegate Control Block in accordance with Repair Procedure 019-103 in the appropriate Service Manual.
2. Use the ECM Calibration Revision History available on QuickServe® Online to confirm the revision date of the calibration currently installed in the engine. If ECM
already contains the most recent calibration revision, DO NOT recalibrate the engine, no further action is needed. File a claim for appropriate Admin and 17-902
Campaign Check and other applicable SRTS to close the eligibility of the engine.
3. If a previous calibration revision is installed, download the latest calibration available on QuickServe® Online. Use the calibration revision history date to identify the
latest calibration revision available. Please refer to Procedure 019-032 in the appropriate Service Manual.
4. Once calibration is up to date, use the Service Tool to enable the Torque Rate Limiter.

Material Disposition
Materials removed as a result of this field action must be scrapped.

Reimbursements
Parts
Note : Miscellaneous Cummins parts, such as o-rings, gaskets, and fasteners, that are not in the Parts list but are required to perform the repair
must be claimed using their part numbers, filed under the parts section of the claim and justified in the claim narrative.
The following parts are covered under this field action:
Part Number

Quantity

Description

662732600

1

BLOCK, WASTEGATE CONTROL

Note : SRTs to gain access that are required to complete the repair, that are sufficiently explained in the claim narrative, may also be claimed on this
action.
Labor Using Applicable Access Code and Time
SRT Code

Description

00-90F

Technician Administrative Time - Field Action Service
Events

17-902

Campaign/ATC Check

19-0G5

Engine Control Module Calibration Code - Transfer
(CMI)

19-39Y

Wastegate Control Valve - Remove and Install - X15N
CM2380 X150B

Travel

Time (hrs)

Travel is not covered under this field action Towing is not covered under this field action.

Other Claimables
Consumables are not covered under this field action.

Claim Instructions
For Cummins Dealers, claims for this Field Campaign must be filed via RAPIDSERVE™ Web (rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please
reference the "Warranty" tab in QuickServe® Online. If there are additional questions, please contact your local Cummins Distributor.
Claim Codes
Description

Code

Account Code:

65

Pay Code:

North America Distributor = X

Pay Code:

North America Dealer = D

Pay Code:

International Distributor = I

Pay Code:

International Dealer = R

Failure Code:

WINBRA

Attachments
Click here to see c7171_esn-list.xlsx
(/service/english/attachments/c7171_esn-list.xlsx)
Engine Family

Fuel System

Design Application
Automotive

Market Application
Automotive

Document History
Date

Details
Document Created; 14-Aug-2025

Last Modified: 14-Aug-2025