Warranty Field Campaign
Campaign Number: c7150

Revision:

MY24 X15 CM2450 X142B PM Sensor Broadcast Emissions Campaign

Released Date: 19-Aug-2025
Expiration Date (U.S. and Canada): 19-Aug-2030
Expiration Date (International): 19-Aug-2030

Attention
U.S. / Canadian Dealers
U.S. / Canadian Distr./Branches and Div. Offices (Auto)
If additional information is required, please contact your Cummins Warranty Operations Group Leader.

Description
This campaign is being issued to address potential emissions concerns on certain MY2024 X15 CM2450 X142B engines. This campaign authorizes certified repair
locations to recalibrate the ECM to the latest revision.

Action
In order to qualify for repair under this field action, an engine:
1. will be covered Regardless of coverage status, and
2. must show as OPEN on QuickServe® Online for this field action.

Note : The ESN list is attached for reference.
After verifying that the engine meets the above requirements, perform the following actions:
1 Use the ECM Calibration Revision History available on QuickServe®® Online to confirm the revision date of the calibration currently installed in the engine. If required,
update the ECM to the most recent calibration revision available using Procedure 019-032 in the appropriate Service Manual.
2 If ECM already contains the most recent calibration revision, DO NOT recalibrate the engine, no further action is needed. File a claim for Admin and 17-902 Campaign
Check to close the eligibility of the engine.

Note : Certified repair locations outside of California, who elect to perform this campaign on engines installed in vehicles which are registered in the
state of California, are authorized to do so if they have the two items noted below in their inventory. Please note that the Label, Authorized Change
and the Proof of Correction Form must be ordered through standard parts processes. They are not available on QuickServe® Online.
3 If applicable, a Label Authorized Change, Cummins part number 5297400, must be filled out and affixed to the engine. Clearly print or type ECM RECALIBRATION
UPDATE in the center box. Fill in the Campaign Number, Distributor or Dealer Code, and Date information. Peel off the backing material and install the label on the engine
valve cover near the engine data plate. There is a clear protective cover on this label; peel the backing off of this cover and push the clear cover over the printed material.
This will help protect the label during engine operation. Label cost and appropriate SRT time can be claimed per Campaign guidelines.
4 If applicable, an Emissions Campaign - Proof of Correction form, Bulletin # 4310621, must be filled out and provided to the Customer. Inform the Customer to retain
this certificate as proof that the Emissions Campaign has been performed. This form may be required as proof of an Emissions Campaign by the State of California, for
vehicles registered in that state, the next time the vehicle registration is renewed. Form cost and appropriate SRT time can be claimed per the Campaign guidelines.
5 File one claim for the listed parts and required labor associated with this repair. SRT 17-902 should ONLY be claimed if the unit DID NOT require calibration.

Material Disposition
There are no materials involved in the field action.

Reimbursements
Parts
Note : All parts listed are OPTIONAL. Claim only the parts required to complete the repair. The part numbers 4310621 and 5297400 are only required
for use on engines installed in vehicles registered in the state of California. They are OPTIONAL for all other applications.
The following parts are covered under this field action:
Part Number

Quantity

Description

431062100

1

PROOF OF CORRECTION FORM (OPTIONAL)

529740000

1

LABEL, AUTHORIZED CHANGE (OPTIONAL)

Note : SRTs to gain access that are required to complete the repair, that are sufficiently explained in the claim narrative, may also be claimed on this
action.
Note : All SRTs listed are OPTIONAL. Select ONLY the appropriate SRTs for the repair performed. If the SCR does not need changed, Claim ONLY
Admin to close the field action. The SRT 17-902 and Admin should ONLY be claimed if the unit DID NOT require calibration. Where required for

registration purposes, SRT 17-901 can be claimed for the application of the Label Authorized Change and the completion of the Proof of Correction
form.
Labor Using Applicable Access Code and Time
SRT Code

Description

Time (hrs)

00-90F

Technician Administrative Time - Field Action Service
Events

17-901

Stamp Engine Data Plate/Apply Emission Sticker
(OPTIONAL)

17-902

CAMPAIGN CHECK (OPTIONAL)

19-0G5

Engine Control Module Calibration Code - Transfer
(CMI)

Travel
Travel is not covered under this field action Towing is not covered under this field action.

Other Claimables
Consumables are not covered under this field action.

Claim Instructions
For Cummins Dealers, claims for this Field Campaign must be filed via RAPIDSERVE™ Web (rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please
reference the "Warranty" tab in QuickServe® Online. If there are additional questions, please contact your local Cummins Distributor.
Claim Codes
Description

Code

Account Code:

65

Pay Code:

North America Distributor = X

Pay Code:

North America Dealer = D

Pay Code:

International Distributor = I

Pay Code:

International Dealer = R

Failure Code:

WEQPEC

Attachments
Click here to see c7150_esn-list.xlsx
(/service/english/attachments/c7150_esn-list.xlsx)
Engine Family

Fuel System

ISX, QSX15 ISX15
Design Application
Automotive

Market Application
All

Document History
Date

Details
Document Created; 19-Aug-2025

Last Modified: 19-Aug-2025