Technical Service Bulletin (TSB)
Low Efficiency Air Conditioning
REFERENCE:

TSB: 24-003-25
GROUP: 24 - Heating and Air
Conditioning

Date:

August 23, 2025

VEHICLES
AFFECTED:

2025 - 2026 (B1) Jeep Renegade
2025 - 2026 (M1) Jeep Compass
2025 - 2026 (H1) Jeep Commander
This bulletin applies to vehicles built on and after August 19, 2024
(MDH 0819XX) and on and before June 18, 2025 (MDH 0618XX).

REVISION: ––

MARKET APPLICABILITY:
NA

MEA

SA

IAP

EE

CH

NOTE: This bulletin applies
to North and South
America markets.
CUSTOMER
SYMPTOM:

The customer may comment on the following:
● Air conditioning provides insufficient cabin cooling.

CAUSE:

Air conditioning refrigerant leak

This Technical Service Bulletin (TSB) has also been released as a Rapid Service Update (RSU) 25-173,
date of issue August 23, 2025. All applicable RSU VINs have been loaded. To verify this RSU service
action is applicable to the vehicle, use VIP or perform a VIN search in DealerCONNECT/Service Library.
All repairs are reimbursable within the provisions of warranty.
REPAIR SUMMARY:
This bulletin involves performing an inspection and possibly replacing the evaporator piping to intermediate
connection.
CLAIMS DATA:

Labor Operation No:
24-45-21-91
24-45-21-92

Failure Code

Labor Description
Evaporator Pipe - Inspect
(2 - Skilled)
Evaporator Pipe - Inspect
and Replace
(2 - Skilled)
ZY

Skill Category
24 - Heating and Air
Conditioning
24 - Heating and Air
Conditioning
Service Action

Labor Time
0.2 Hrs.
0.9 Hrs.

J24 FSAR-RSU-6102

-2-

SPARE PARTS:

Qty
1 (AR)
1 (AR)
(AR)

Part No.
EMEA - 11084083
MOPAR - 06107235AA
EMEA - 7099626
MOPAR - 68657569AA
EMEA - 7079358
MOPAR - 68447954AA

Description
Seal, A/C Line

Notes

Evaporator Pipe
R-134a Refrigerant

0.1L
Reimbursement only

DIAGNOSIS:
If a customers VIN is listed in VIP or your RSU VIN list, perform the repair. If any vehicle not on the VIN list
exhibits any of the symptom listed above in the customer symptom section, perform the Repair Procedure.
REPAIR PROCEDURE:
WARNING!
Mandatory PPE: Ensure you wear appropriate Personal Protective Equipment (PPE) throughout the
inspection, such as:
● Heat protection gloves.
● Safety glasses.
● Safety footwear.
● Appropriate clothing for the automotive environment.
1. Start the vehicle and activate the air conditioning system so that the air conditioner is engaged at minimum
temperature and maximum fan speed.
NOTE: Keep the hood open and keep the engine running for at least 20 minutes.
2. After 20 minutes of engine run time with the hood open, set the ignition to OFF.
3. Identify the evaporator piping to intermediate connection Fig. 1.

Fig. 1
Inspect Evaporator Tube
1 - Evaporator Tube

-3-

J24 FSAR-RSU-6102

4. Inspect the evaporator piping to intermediate connection for evidence of ice or excessive condensation Fig.
2.

Fig. 2
1- Excessive Condensation/Ice On Evaporator Tube

5. Does the evaporator piping exhibit evidence of ice or excessive condensation Fig. 2?
● YES>>> Proceed to Step 6.
● NO>>> This bulletin has been completed, use Inspection LOP (24-45-21-90) to close the active RSU.
6. Replace the evaporator pipe. Refer to the detailed service procedures available in DealerCONNECT/
Service Library under: Service Info> 5040A88 - Tubulação Do Evaporador À Conexão Intermediária - R.R..
NOTE: For SA market only, after applying this TSB, it is not necessary to send DID-I or DID-A.
POLICY:
Reimbursable within the provisions of the warranty.
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.