News Channel Update |

Vehicle Compliance & Analysis

ATTENTION: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers & Parts Managers

Service Campaign Notification
August 15, 2025
Campaign #

Description

2025080001

25P5496536

Update Fuel System Control Unit Software
Campaign Details

Total Population 4,144

Model(s)/
Platform(s)

Model Year(s) 2021-2022

C-Class, S-Class, SL
(206, 223, 232 platform)

Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain
Issue subject vehicles, the fuel system control unit (FSCU) software may not correspond to the current series
production configuration. As a result, on-board diagnostic requirements may not be met.
Remedy

MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will update the FSCU
software on the affected vehicles.

Launch Date Affected VINs will be flagged as “OPEN” in VMI on Friday, August 15, 2025.
Warranty Claim Notice

Please note the campaign will close after the warranty claim has been submitted. This change can
take at least one-day to reflect in NetStar VMI.

While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and
customer satisfaction. Please refer all customer inquiries to the Customer Care Center at 1-800-FOR-MERCEDES.

Mercedes-Benz USA, LLC
One Mercedes-Benz Drive

A Mercedes-Benz Group AG Company

Sandy Springs, GA 30328

770.705.0600

August 2025
Rev. January 31, 2025
TO:

ALL MERCEDES-BENZ CENTERS

CAMPAIGN NO.

2025080001

CAMPAIGN DESC.

25P5496536

SUBJECT
MODEL(S)
MODEL YEAR(S)
CAMPAIGN POPULATION

Update Fuel System Control Unit Software
C-Class, S-Class and SL-Class (206, 223 and 232 platform)
2021 – 2022
4,144

Service Campaign Bulletin

Service Campaign Bulletin

Service Campaign Bulletin

Prior to performing this Campaign:
Check the Vehicle Master Inquiry (VMI) to verify this campaign applies to the specific vehicle.
Always check for other open campaigns and perform them accordingly!
Review the entire campaign bulletin first, and perform the procedures exactly as described.

Revision Note(s):

Order No. P-SC-2025080001

Service Campaign Bulletin

Service Campaign Bulletin

Service Campaign Bulletin

Campaign Technical Instructions

Update Fuel System Control Unit Software
Model(s): 206, 223 and 232

2

• Always use the latest XENTRY Diagnosis software release with all available add-ons.
• Follow the operation steps exactly as described in XENTRY Diagnosis.
• Use a charger to ensure sufficient power supply to the vehicle’s on-board electrical battery system
(greater than 12.5 V).
• If XENTRY Diagnosis is already connected to the vehicle, start with Work Procedure Step 2.
If two or more software updates or SCN codings are performed during a single workshop visit, operation items
02-4762 and 02-5058 may be invoiced only on one of the workshop orders.

Work Procedure
1. Connect XENTRY Diagnosis.
2. Update Fuel System Control Unit (FSCU10) software.
To do so, select menu item "Quick test view → N118/3 – Control unit ‘Fuel pump’ (FSCU10) → Adaptations →
Control unit update → Updating of control unit software".
Then follow the user guidance in XENTRY Diagnosis.

3. Disconnect XENTRY Diagnosis.

Warranty Information
Note: The following allowable labor operation should be used when submitting a warranty claim for this repair:
Damage

Operation

Code

Number

54 965 36

*

Description

Labor Time
(hrs.)

02-9334

Update software for Fuel System Control Unit (FSCU10)
(with XENTRY Diagnosis connected)

0.1

02-4762*

Connect/disconnect diagnostic system
(XENTRY Diagnosis)

0.1

02-5058*

Connect/disconnect starter battery charger
(with XENTRY Diagnosis connected)

0.1

Invoice operation item only once for each workshop Repair Order.

Note: Always check Xentry Operation Time (XOT) for the current OP-Code times. Labor times are subject to change
and updates may not be reflected in this document.

1

P-SC-2025080001