NHTSA ID Number: 11021938
Manufacturer Communication Number: 37249
TSB/Document Date: 2025-08-18
Summary
This is a Technical Journal: Check Engine Light and DTC - ECM P001792. If VIDA symptom-based fault tracing leads to the replacement of parts, follow method in attachment TJI-531608-1_1_1_en-US 1.pdf
Page 21 ( 60 )
Remove the screw.
Fold marked part aside.
Torque:
M6 , 10 Nm
Note! Note the position of the component
before removal.
TJ Instruction VCC-531608-2
Page 22 ( 60 )
Remove the screws.
Torque:
• Stage 1 : Right-hand engine pad to body
frame , 90 Nm
• Stage 2 : Right-hand engine pad to body
frame , 60°
Remove right side the front wheel , refer to:
Removal, replacement and installation
7 - Springs and wheels
77 - Wheels, tyres
770 - complete wheels
Remove the screws.
Remove the clip.
Remove the marked part.
TJ Instruction VCC-531608-2
Page 23 ( 60 )
Remove the screws.
Remove the marked part.
Remove the screws.
TJ Instruction VCC-531608-2
Page 24 ( 60 )
Remove the clips.
Remove the nuts.
TJ Instruction VCC-531608-2
Page 25 ( 60 )
Remove the marked part.
Remove the nut.
Remove the marked part.
TJ Instruction VCC-531608-2
Page 26 ( 60 )
1 . Remove the screws.
2.
Torque:
M6 , 10 Nm
3 . Remove the marked part.
Disconnect the connector.
Loosen the clips.
TJ Instruction VCC-531608-2
Page 27 ( 60 )
Loosen the screws.
Do not remove the screws completely.
Remove the screws.
Remove the marked part.
TJ Instruction VCC-531608-2
Page 28 ( 60 )
Remove the screws.
Remove the marked part.
Torque:
M6 , 10 Nm
Remove the screws.
Remove the marked part.
Torque:
Lower torque rod rear right, to Engine mount
bracket , 110 Nm
TJ Instruction VCC-531608-2
Page 29 ( 60 )
Remove the screws.
Remove the marked part.
Torque:
• Stage 1 : Lower torque rod rear right, to
subframe , 90 Nm
• Stage 2 : Lower torque rod rear right, to
subframe , 120°
Remove the screw.
Torque:
• Stage 1 : Collision member to subframe ,
30 Nm
• Stage 2 : Collision member to subframe ,
90°
TJ Instruction VCC-531608-2
Page 30 ( 60 )
Special Tool: T9997680, Support
Install the Special tool.
TJ Instruction VCC-531608-2
Page 31 ( 60 )
Install the Special tool.
1 . Install the marked component.
2.
Torque:
M12 , 80 Nm
3.
Torque:
M8 , 24 Nm
TJ Instruction VCC-531608-2
Page 32 ( 60 )
Remove the screws.
1.
2.
Torque:
• Stage 1 : Engine mount bracket, to
Cylinder head, M12 , 90 Nm
• Stage 2 : Engine mount bracket, to
Cylinder head, M12 , 90°
Torque:
Engine mount bracket, to Cylinder head,
M10 , 60 Nm
Install the Special tool.
Special Tool: T9997718, Counterhold
TJ Instruction VCC-531608-2
Page 33 ( 60 )
Remove the marked part.
Note! The component can be reused
unless it has been subjected to abnormal
mechanical stress, damage or oil
contamination.
TJ Instruction VCC-531608-2
Page 34 ( 60 )
Lower the engine.
Note! Note the position of the component
before removal.
Remove the screw.
Remove the marked part.
TJ Instruction VCC-531608-2
Page 35 ( 60 )
Extra information
Caution! Make sure that the component is
positioned correctly.
Continue the installation following the steps below.
Remove the screw.
TJ Instruction VCC-531608-2
Page 36 ( 60 )
Disconnect the connector.
Loosen the clips.
Remove the marked part.
Torque:
Lambda probe, tightening , 45 Nm
TJ Instruction VCC-531608-2
Page 37 ( 60 )
Disconnect the connectors.
Remove the cable harness clips.
Fold marked part aside.
Remove the screws.
Remove the marked part.
TJ Instruction VCC-531608-2
Page 38 ( 60 )
Vehicles early version
Caution! The component must be removed
by hand. Tools may not be used.
Note! Use new seals.
Remove the screws.
Remove the marked parts.
Torque:
M6 , 10 Nm
All vehicles
Disconnect the connector.
Remove the screws.
Remove the marked parts.
TJ Instruction VCC-531608-2
Page 39 ( 60 )
Note! Make sure to follow the correct
sequence during installation.
Note! Use a new seal.
Remove the clips.
Remove the screws.
Remove the marked part.
Torque:
M6 , 10 Nm
Install the Special tool.
Pull the component in direction of the arrow.
TJ Instruction VCC-531608-2
Page 40 ( 60 )
Remove the nut.
Torque:
M8 , 24 Nm
Remove the nut.
Torque:
M8 , 24 Nm
TJ Instruction VCC-531608-2
Page 41 ( 60 )
Disconnect the connector.
Remove the screws.
Torque:
M8 , 24 Nm
TJ Instruction VCC-531608-2
Page 42 ( 60 )
Remove the screws.
Remove the marked part.
Hint: It may be necessary to twist or turn
the component.
Torque:
M8 , 24 Nm
Remove the screws.
Remove the marked part.
1.
2.
Torque:
M8 , 24 Nm
Torque:
M10 , 50 Nm
TJ Instruction VCC-531608-2
Page 43 ( 60 )
Note! Make sure that the component is
installed.
Remove the screws.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-2
Page 44 ( 60 )
Warning! Be prepared to collect escaping
fluid.
Caution! Make sure that the area around
the component is clean and free of foreign
material.
Note! Make sure that a new component is
installed.
Remove the nuts.
Remove the marked part.
Special Tool: T9814129, Hook wrench
Torque:
• Stage 1 : High-Pressure Fuel Line to Fuel
Pump , 18 Nm
• Stage 2 : High-Pressure Fuel Line to Fuel
Pump , 30 Nm
Remove the Special Tool.
TJ Instruction VCC-531608-2
Page 45 ( 60 )
Release the locks.
Caution! Make sure that the area around
the component is clean and free of foreign
material.
Caution! In order to avoid damage to the
injectors, the part must be carefully pulled
straight up.
Caution! Be extra careful when removing or
installing this component.
Remove the screws.
Remove the part carefully
1.
2.
3.
Torque:
Fuel rail M7 , 22 Nm
Torque:
Fuel rail M8 , 30 Nm
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-2
Page 46 ( 60 )
Warning! Be prepared to collect escaping
fluid.
Caution! Be extra careful when removing or
installing this component.
Remove the marked parts.
When necessary, perform the following instruction.
Note! Orientation view
Special Tool: T9512943, L-hook
TJ Instruction VCC-531608-2
Page 47 ( 60 )
Caution! In order to avoid damage to the
injectors, the part must be carefully pulled
straight up.
Caution! Be extra careful when removing or
installing this component.
Remove the marked part.
Special Tool: T9512943, L-hook
Replace injector seal , refer to:
Removal, replacement and installation
2 - Engine with mountings and equipment
23 - Fuel system
237 - injector and delivery pipe
Caution! Be extra careful when removing or
installing this component.
Install the marked components.
TJ Instruction VCC-531608-2
Page 48 ( 60 )
Extra information
Caution! Make sure that the mating faces
are clean and free of foreign material.
Caution! Clean carefully, using compressed
air.
Special Tool: T9997505, Cleaning tool
Note! Use new seals.
Remove the screws.
Remove the marked part.
1.
2.
Torque:
M5 , 5 Nm
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-2
Page 49 ( 60 )
Remove the screws.
Remove the marked part.
Torque:
M6 , 10 Nm
Applies to reassembly of the same component
Note! The component can be reused
unless it has been subjected to abnormal
mechanical stress, damage or oil
contamination.
TJ Instruction VCC-531608-2
Page 50 ( 60 )
Caution! The part is to be reused.
Caution! The part is to be reused.
Continue the removal following the steps below.
Remove camshaft seal , refer to:
Removal, replacement and installation
2 - Engine with mountings and equipment
21 - Engine
215 - transmission
TJ Instruction VCC-531608-2
Page 51 ( 60 )
Loosen each bolt 2 turns at a time until all bolts
are removed.
Remove the marked part.
Vehicles early version
Caution! Note the location of the
component before removal.
Caution! Take extra care when handling the
components.
Remove the marked parts.
TJ Instruction VCC-531608-2
Page 52 ( 60 )
Vehicles late version
Caution! Note the location of the
component before removal.
Caution! Take extra care when handling the
components.
Remove the marked parts.
Cleaning
Caution! Take extra care not to damage the
mating faces.
Caution! Make sure that the oil galleries are
clean and free of foreign material.
Note! Make sure that the mating faces are
clean and free of foreign material.
Use: Putty knife (plastic)
Use: Abrasive cloth , 9511024
Use: Isopropanol ,
TJ Instruction VCC-531608-2
Page 53 ( 60 )
Caution! Take extra care not to damage the
mating faces.
Caution! Make sure that the oil galleries are
clean and free of foreign material.
Note! Make sure that the mating faces are
clean and free of foreign material.
Use: Putty knife (plastic)
Use: Abrasive cloth , 9511024
Use: Isopropanol ,
Installation
Caution! Make sure that the engine oil is to
specification.
TJ Instruction VCC-531608-2
Page 54 ( 60 )
Caution! Make sure that the engine oil is to
specification.
The following steps apply if no damages have
been discovered
Caution! Make sure that the components
are positioned correctly.
TJ Instruction VCC-531608-2
Page 55 ( 60 )
Caution! Make sure that the components
are positioned correctly.
Install the marked component.
Caution! Make sure that the components
are positioned correctly.
TJ Instruction VCC-531608-2
Page 56 ( 60 )
Caution! Make sure that the components
are positioned correctly.
Caution! Make sure that the components
are positioned correctly.
TJ Instruction VCC-531608-2
Page 57 ( 60 )
The following steps are performed on new
component.
Caution! Make sure that the components
are positioned correctly.
Install the marked components.
Caution! Make sure that the components
are positioned correctly.
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 37249
Replacement Service Bulletin Number:
MFR Communication Date: 2025-07-31
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- Pro Features, Home Mechanic Budget: Why pay thousands for factory scan tool? The VD70S scan tool delivers advanced professional diagnostic at an affordable price, including 10x faster 33-66ft wireless scanning, 4000+ active tests, 36+ hot services, ECU coding, PMI function, and OE-level full-system scan with 8-in-one data graph. It rivals expensive shop tools - perfect for DIYer, technician and small shop. Get dealer-grade power without the cost - the VD70S obd2 scanner diagnostic tool makes pro diagnostic accessible to all. The available function tests vary by model—please check compatibility via vdiagtool2 @ outlook . c o m before purchase
- Full Bidirectional Control for Precision Repair: VD70S obd2 scanner gives you direct vehicle module control to test components like fuel pump, injector, A/C clutch, window and more, enabling you to accurately and quickly locate faulty components. Unlike basic obd2 code reader, our advanced bidirectional control lets you actively command system - like triggering the ABS pump to confirm your fix worked. With pinpoint component testing and real-time validation, you can diagnose intermittent issues faster and prevent costly return visits. The VD70S auto diagnostic scanner transforms complex diagnostic into precise, time-saving repair - giving professional-grade accuracy at an unbeatable value
- 33-66FT Wireless Freedom - Faster & More Stable: Say goodbye to 2M cable limits. Easily Perform bi-directional tests like folding mirror, activating light or fuel pump while walking freely around your vehicle - no more cable dragging or repositioning your tool. Unlike other 33ft BT obd2 scanner that still need a cable to handle DOIP vehicle diagnostics, the VD70S bidirectional scan tool delivers a truly cable-free experience - with up to 66ft stable transmission range and faster, more reliable data transfer. With VD70S scanner, you get pro-level flexibility, faster workflow and stable diagnostics without cable clutter or wireless dropouts
- Powerful & Affordable Auto Scanner with 36+ Special Functions: Take control of your vehicle maintenance and save hundreds in shop fees with the VD70S car diagnostic tool. This car tool performs 36+ hot services including ✔Crank Sensor Relearn, Oil Reset, EPB, TPMS Reset, Throttle Adaptation, Injector Coding, ABS Bleed and more. ✔Besides, the VD70S bidirectional obd2 scanner unlocks 100+ advanced vehicle-specific functions under specific system menu, including Idle Relearn, VIN Write, Crankshaft Sensor Relearn, Fuel Trim Reset, ABS Initialization and more. These features help you solve complex system error and restore optimal vehicle performance. Text us your VIN we’ll check the compatibility
- OE-Level Full System Diagnostic, Simplified Workflow: The VD70S car diagnostic scanner delivers OE-level full system scanning (ABS/ECM/BCM/SRS/TCM and more) without the dealership cost. ✔Easily view 8 live data streams, retrieve freeze frame and run active test to quickly identify problem. ✔With advanced bidirectional control, test components like fuel injector and sensor directly to verify repair with certainty. ✔The 8-in-one graphing tracks performance trend to catch intermittent issue like a pro. Whether you're a technician or car owner, the diagnostic scanner provides shop-quality diagnostic to optimize performance and prevent costly repair - all in one affordable tool
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.