NHTSA ID Number: 11018891
Manufacturer Communication Number: 25-AT-001H TSB
TSB/Document Date: 2025-06-03
Summary
Certain Santa Fe (TMA) and Sonata (DN8/DN8A) vehicles equipped with 8-speed dual clutch transmissions
(8DCT) may exhibit one of the DTCs listed below, related to the high pressure electric oil pump (HP EOP). Follow the procedures in this TSB to update the Transmission Control Unit (TCU) to the latest sensorless logic on affected vehicles, and then perform air bleeding and transmission learning.
GROUP
AUTOMATIC
TRANSMISSION
DATE
Technical Service Bulletin
MAY 2025
NUMBER
25-AT-001H
MODEL(S)
SANTA FE (TMA)
SONATA
(DN8/DN8A)
TCU SOFTWARE UPDATE FOR 8DCT HP EOP
SENSORLESS LOGIC
SUBJECT:
Description: Certain Santa Fe (TMA) and Sonata (DN8/DN8A) vehicles equipped with 8-speed dual
clutch transmissions (8DCT) may exhibit one of the DTCs listed below, related to the high pressure
electric oil pump (HP EOP). Follow the procedures in this TSB to update the Transmission Control Unit
(TCU) to the latest sensorless logic on affected vehicles, and then perform air bleeding and
transmission learning.
HP EOP DTCs
DTC
Description
P1C2D03
HP EOP Motor Position Sensor
P1C2D1C
HP EOP Motor Position Sensor
P1C2E92
HP EOP Motor Control
Applicable Vehicles:
• 2021–2023MY Santa Fe (TMA) equipped with 8DCT
• 2021-2022MY Sonata (DN8/DN8A) equipped with 8DCT
GDS Information:
System
AT /
Transmission
Event
Number
Description
1125
TMa PE 2.5T 8DCT HP EOP SENSORLESS LOGIC UPDATE
WHEN MOTOR MIL ILLUMINATE
DN8a N 2.5T 8DCT HP EOP SENSORLESS LOGIC UPDATE
WHEN MOTOR MIL ILLUMINATE
(or use a later available event as listed in the GDS AT/Transmission Update screen if one is
available.)
1126
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
TCU SOFTWARE UPDATE FOR 8DCT HP EOP SENSORLESS LOGIC
SST Information:
Tool Name
Tool Number
VCI 3
G0VHNNN06
VCI 2
Figure
Remarks
Ordering Information
VCI 3 comes with
the 19-pin cable
(P/N G1XDDCA020)
Website:
https://hyundaiessentialtools.com/
Email:
[email protected]
Phone: 1-855-763-9199
Hours: 7 AM – 7 PM CST
G1XDDMN001
Warranty Information:
Model
Op. Code
Operation
Op.
Time
Causal Part
Nature
Code
Cause
Code
954A1F06
TCU Update
+
Air Bleeding
+
DCT Learning
0.8
M/H
Refer to applicable
part on page 3 for
appropriate model
W17
ZZ3
Santa Fe
(TMA)
Sonata
(DN8/DN8A)
NOTE 1: Normal warranty applies.
NOTE 2: Submit claim on Claim Entry Screen as “Warranty” type.
NOTE 3: If a part is found in need of replacement while performing this TSB and the affected part is
still under warranty, submit a separate claim using the same repair order. If the affected part is out of
warranty, submit a Prior Approval request for goodwill consideration prior to performing the work.
TSB #: 25-AT-001H
Page 2 of 11
SUBJECT:
TCU SOFTWARE UPDATE FOR 8DCT HP EOP SENSORLESS LOGIC
ROM ID Information:
System
Model
ECU
Part Number
ROM ID
Old
New
VTMPT25XXX720NS0
VTMPT25XXX720NS1
VTMPT25XXX730NS2
VTMPT25XXX800NS3
Santa Fe
(TMA)
(w/ 2.5T &
SBW)
VTMPT25XXX800NS4
954A1-2N250
VTMPT25XXX800NS5
VTMPT25XXX832NS6
VTMPT25XXX920NSC
VTMPT25XXX900NS8
VTMPT25XXX900NSA
VTMPT25XXX920NSB
VTMPT25XXW900NS1
VTMPT25XXW920NS2
VDN8T25XXX700NS0
AT /
Transmission
VDN8T25XXX700NS1
VDN8T25XXX720NS2
VDN8T25XXX720NS3
VDN8T25XXX720NS4
Sonata
(DN8/DN8A)
(w/ 2.5T &
SBW)
954A1-2N060
VDN8T25XXX730NS5
VDN8T25XXX800NS6
VDN8T25XXX920NSE
VDN8T25XXX832NS7
VDN8T25XXX832NS8
VDN8T25XXX900NSA
VDN8T25XXX900NSC
VDN8T25XXX920NSD
VDN8T25XXW900NS0
954A1-2N061
VDN8T25XXW900NS1
VDN8T25XXW920NS3
VDN8T25XXW920NS2
TSB #: 25-AT-001H
Page 3 of 11
SUBJECT:
TCU SOFTWARE UPDATE FOR 8DCT HP EOP SENSORLESS LOGIC
Service Procedure:
NOTICE
You must initially perform the GDS ECU update in Auto Mode.
• If the ECU update starts but then fails in Auto Mode, perform the update in Manual Mode
to recover.
NOTICE
Ensure the vehicle’s battery charge is above 11.0 Volts and the tablet’s battery charge is above
30% before performing a software update to avoid the update from failing.
i
Information
•
Turn OFF all lamps (do NOT leave head lamp switch in auto mode) and all accessories.
•
Perform update with the ignition switch in the ON position.
•
Do NOT disconnect any cables connected to the vehicle or scan tool during update.
•
Do NOT start the engine during update.
•
Do NOT turn OFF the ignition switch during update.
Table of Contents
•
Service Procedure Flowchart ................................................................................................... 5
•
ECU Update Procedure............................................................................................................ 6
•
Air Bleeding Procedure ............................................................................................................ 9
•
DCT Learning Procedure ....................................................................................................... 10
•
Vehicle Driving Inspection ...................................................................................................... 11
TSB #: 25-AT-001H
Page 4 of 11
SUBJECT:
TCU SOFTWARE UPDATE FOR 8DCT HP EOP SENSORLESS LOGIC
Service Procedure Flowchart
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 25-AT-001H TSB
Replacement Service Bulletin Number:
MFR Communication Date: 2025-05-30
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.