To:
Object:
Date:
Pages

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15
Please, execute the following steps:

IMPORTANT:
Trouble shooting for SVM ERP Error received:

From the "Test plan" menu, click on the "Select
own test" box and then click on the magnifying
glass:

•
•
•

8013 → please contact Technical Support
8088 → please contact Technical Support
8101 → please check the correct syntax of
SVM code inserted.
• 8113 → This error could have several resolutions:
a. If appear only the screen with error 8113, please
perform a 12V battery reset and a sleep cycle. Repeat SVM code and contact Technical Support if
not resolved.
b. If appear the following screens (ECU02 update
failed):

Enter in the search bar “Update programming”.
Select the function “Update programming (Beta
Version)” and click on “Go to”.

Please, follow the instructions displayed: switch
the ignition OFF and back ON after 10 seconds
and then click “Done/Continue” to continue.
c. If appear the following screen at the end of the
function (ECU02 update failed):

Rev.05
CONFIDENTIAL

Click on “Attach to test plan”.

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

8/15

L74XA.05.25

To:
Object:
Date:
Pages

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15

If the steps are successful, the function Update
programming (Beta Version)" will appear in the
Test plan. Click now on the Update programming
(Beta Version)” function and then “Perform test”.

Select the control unit type to flash. In this select
option “- 1. -“, “ASAM/UDS”.

Click on “- 1. -” if the selection is correct, oth-erwise click “- 2. -” for repeat program or “- 3. -” for
abort program.

Insert the name
“FL_47B927256_0010_4821C523_V001_S”.

FL_47B927256_0010_4821C523_V001_S

Select the extension of the file “.pdx”.
Specify the control unit Diagnostic Address and
then click on “Apply” box. In this case insert “02”.

02

At the end of the update, O.D.I.S. Service will
show some data about control unit software version. Please check that the ECU02 SW version is
0010.
After the update, perform the guided function
“SVM – Code input” again (steps from 13 to 22).

Rev.05
CONFIDENTIAL

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

9/15

To:
Object:
Date:
Pages

L74XA.05.25

•

•

•

•

•

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15

8118 → please perform a sleep cycle. Be
sure the control unit 5F has been updated
to correct software (see previous steps).
Check the software level via 5f – control
unit identification and compare it to the
reference table. Repeat SVM code and
contact Technical Support if not resolved.
8037 → Please check your O.D.I.S Service
version and hotfix as indicated in “Preliminary operation” section.
9999 → for the owners of the new D3 Edge
Box, please refer to the informative bulletin BI.08.24 to check the correct O.D.I.S
Service connection setup.
ECU 0011 - Status 12 → the error does not
indicate an issue and can be continue with
the next step of the campaign. Please, select option 1 to go ahead.

ECU 0017 - Status 13 → the error does not
indicate an issue and can be continue with
the next step of the campaign. Please, select option 1 to go ahead

Rev.05
CONFIDENTIAL

•
•

ODS5003E → If the following screen appear please close and repeat the SVMCode.

IMPORTANT:
Trouble shooting for DTCs after SVM code:
If during the SVM Code input procedure, the follow errors appear:
•

ECU0074 → C10C500: Basic setting (deflected) not performed: please, from the
ECU 0074, execute the guided function
“74 - Ride hide full process”

Then click on basic setting "2 - Lifting system " and
follow the instructions directly from the O.D.I.S.
Service.

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

10/15

To:
Object:
Date:
Pages

L74XA.05.25

•

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15

ECU00C5 → U020600: Lost Communication with folding top control module

From the "Test plan" menu. Click on the "Select
own test" box and then click on the magnifying
glass:

Click on “Attach to test plan”.

If the steps are successful, the function Update
programming (Beta Version)" will appear in the
Test plan. Click now on the Update programming
(Beta Version)” function and then “Perform test”.

Enter in the search bar “Update programming”.
Select the function “Update programming (Beta
Version)” and click on “Go to”.
Select the control unit type to flash. In this select
option “- 1. -“, “ASAM/UDS”.

Rev.05
CONFIDENTIAL

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

11/15

L74XA.05.25

To:
Object:
Date:
Pages

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15

Specify the control unit Diagnostic Address and
then click on “Apply” box. In this case insert “C5”.

Select the extension of the file “.odx”.

C5

Click on “- 1. -” if the selection is correct, oth-erwise click “- 2. -” for repeat program or “- 3. -” for
abort program.

At the end of the update, O.D.I.S. Service will
show some data about control unit software version. Please check that the ECU 00C5 SW version
is 0503.

Insert the name
“FL_47B965429D_0503__V001_S”.

FL_47B965429D_0503__V001_S

Rev.05
CONFIDENTIAL

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

12/15

To:
Object:
Date:
Pages

L74XA.05.25

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15

Final operations:

/* Diagnosis protocol saving */

IV.

26. Save the Diagnostic protocol as described in
the chapter “Saving a diagnostic protocol” on
app “O.D.I.S. Self Service Guide”, available on
Lamborghini HUB portal when the procedure
described in this document is completed.

Erase fault memory

23. Select the “Special Functions” card and then
“Erase fault memory - overall system” to delete all stored faults.

27. For the correct saving of the data after the SW
update, it is necessary to close O.D.I.S. Service, start a new diagnostic session and save
a new protocol. Both protocols must be attached to the Corresponding Warranty Request in LIASS.

24. The complete guide for deleting faults is available in the chapter “Reading/cleaning event
memory” on app “O.D.I.S. Self Service Guide”,
available on Lamborghini HUB portal.

IMPORTANT:
The Diagnostic Protocol must be attached to the
Corresponding Warranty Request in LIASS (to enter the request on the web portal, refer to the
W.Claim manual which you can consult in the
Warranty section of the portal).

25. Go back to the “Block diagram” card and select “Read all fault memories” from one of the
vehicle’s control units to update the display of
the faults present after deletion.

IMPORTANT:
Solve any faults still present by performing the
functions listed in the “Test plan”. Perform the
procedure “IV. Erase fault memory” again until all
faults are fully removed from the vehicle’s control
units.

Rev.05
CONFIDENTIAL

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

13/15

To:
Object:
Date:
Pages

L74XA.05.25

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15

Trouble shooting for generic issues:
If the following error screen is displayed,
abort the guided function by clicking on
“Cancel Test” and contact Technical Support.

If the following connection error is displayed like in the following example
screenshots:
-

If an error is displayed that regards the
hardware interface, and the "connection to
vehicle" and "key state" icons appear as
shown in the figure below:
-

Click “Cancel”;
Repeat installation of the interface
VAS6154/6154A/6154B for the instructions
in procedure (*) “Checking the VAS 6154”,
selecting the right-hand “Extras” menu in
O.D.I.S. Service and clicking on the “Diagnostic interface” button.

Rev.05
CONFIDENTIAL

It is not possible to connect to the central server; check that your laptop is correctly connected to the Internet and retry by clicking on “Yes” or “Done/continue”, as appropriate.

If the connection is dropped during the target/actual comparison during the SVM
procedure:
-

It is not possible to connect to the central server; check that your laptop is correctly connected to the Internet and retry by clicking on “1”.

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

14/15

To:
Object:
Date:
Pages

L74XA.05.25

After Sales Official Network
BL5.2 BL Update PN_47B990100D_REV0101
/04/2025
15

If the same error type should reoccur during the application test, try the following
procedure:
-

Exit O.D.I.S. Service
Restart O.D.I.S. Service ensuring that:
1. You have a network connection
2. The O.D.I.S. Service connection is
set to Internet

-

Run the connection test again and perform the SVM again.

IMPORTANT:
If the following error should occur, it is necessary
to follow the instructions given in BI.25.18
(Rev.02), which can be downloaded on the Lamborghini HUB portal:

IMPORTANT:
The documents which must be provided together
with the operation under warranty request are:
-

Produced Repair Order

-

Saved Diagnostic Protocol with BETA
report

Failure to follow these procedures could lead to
the request being rejected.

For more information, please contact your Area
Manager or open a ticket to Technical Support in
Lamborghini KEY (Request – General Information
– After Sales Services - After Sales Technical
Support).
Regards,
Lamborghini Service

All O.D.I.S. Service technical documentation can
be viewed on the Lamborghini web portal, in the
O.D.I.S. Sel Service app.

Rev.05
CONFIDENTIAL

The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]

15/15