NHTSA ID Number: 11018129
Manufacturer Communication Number: L74X-A.11.25
TSB/Document Date: 2025-05-07
Summary
Service campaign agreed with CARB. Problem: Lateral and longitudinal acceleration sensors need to be monitored by the OBD system. Solution: Introduction of diagnosis for lateral and longitudinal acceleration sensors.
To:
Object:
Date:
Pages
L74XA.11.25
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
Campaign code:
L74X-A.11.25
Campaign name:
BL4.6 Update PN_47B990100C_Rev_0131_0132
Model:
Revuelto
Model Year:
2024
Markets:
Italy, Germany, United States, Canada, United
Kingdom, Denmark, Belgium, France,
Netherlands, Sweden, Luxembourg, Spain,
Portugal, Greece, Monaco, Poland, Azerbaijan,
Czech Republic, Austria, Romania, Estonia,
Turkey, India, Singapore, Lebanon, Indonesia,
United Arab Emirates, Qatar, Saudi Arabia, New
Zealand, Bahrain, Kuwait, Taiwan, Thailand,
Mexico, Malaysia, Philippines, Switzerland,
Cambodia, Oman, Peru, Latvia, Hungary, South
Africa, Macao, Vietnam, Hong Kong, Australia,
Brazil, Norway
VIN Involved:
From RLA00042 To RLA01883
Important information: before proceeding with
the repair, connect to the Warranty Portal and,
using the “VIN Info” function, check that:
•
The vehicle is affected by the instructions
contained in this bulletin.
NOTE: some vehicles may not be affected,
despite the fact that their Vehicle
Identification Number (VIN) falls within the
range.
•
Only replacement parts that correspond to
the specific operation, identified by a
letter (such as A, B, C, etc.), are to be used
for the chassis being repaired.
Example
Rev.00
CONFIDENTIAL
N.B.:
Operation A will be available only when the
instructions require a preliminary check to be
performed to determine whether or not the
vehicle actually needs updating.
Information for the service network:
During ongoing product monitoring, Automobili
Lamborghini
S.p.A. informs you that a new baseline software update is now available.
Solution for the field:
Update the car as stated in the follow instructions.
IMPORTANT!
Before carrying out the operations contained in
this bulletin, please execute any other campaigns
planned for this vehicle in the time order in which
they were issued. The time order can be identified
by the name of the bulletin. Example: L62X-A04.19 is bulletin number 4 of 2019.
Spare Parts:
None
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
1/19
To:
Object:
Date:
Pages
L74XA.11.25
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
Management of replaced parts:
Store the components that have been removed
from the vehicle in an appropriate manner, marking them with their corresponding bar codes so
that they can be identified during visits by the
competent Area Manager.
Important information:
attach all documents generated during the work
carried out, evidence of the work itself, for
instance work orders and diagnostic protocols
with BETA-Reports.
If one or more of these is missing, it may lead to a
rejected reimbursement request.
Labor time:
Operation B: 3,0 h
Previous bulletins superseded.
None
Fill out the page in the warranty booklet
(identified in the image below) in the section
“Service and Recall Campaigns”:
Warranty claims instructions:
To request reimbursement for the repair
performed, access the “LIASS” system on the
Lamborghini
portal
and,
following
the
instructions in the system’s “Manuals” section,
generate and fill out a Warranty Request.
Select the required campaign and proceed with
entry; carefully read the options present in the
alert message that displayed by the system (see
example) and select the option performed on the
vehicle.
Tools/Materials required
Code
Description.
Reimbursement will be structured as follows
based on the operation performed:
-
n\a
n\a
Q.ty
n\a
OPERATION B:
o
o
Steps to be executed: I to VII
Labor time: 3,0 h
At the end of the steps mentioned in the Operation B, the following ECUs will have the following
SWs target:
ECU
Engine Master 01
Transmission 02
Brake 03
Engine Slave 11
Infotainment 5F/17
Rev.00
CONFIDENTIAL
N.B.
All O.D.I.S. Service technical documentation can
be viewed on the Lamborghini web portal, in the
O.D.I.S. Sel Service app.
SW version
0014
0010
0181
0014
419
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
2/19
To:
Object:
Date:
Pages
L74XA.11.25
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
Preliminary operations:
The instructions contained in this bulletin are
based on the O.D.I.S. Service diagnosis software
updated at the last version. Please, make sure
that O.D.I.S. Service is properly updated on your
laptop.
IMPORTANT!
Before carrying out the operations contained in
this bulletin is mandatory to install the last Hotfix
available at the following DMS link:
To do that, open O.D.I.S Service and check if are
present one of the icons shown in the images below:
Lamborghini DMS → ROOT → Service → Diagnosis → Documents → O.D.I.S. Service → Download
→ O.D.I.S. Service HOTFIX
1.
Update O.D.I.S Service by uninstalling and
reinstalling the SW: further instructions
available on the O.D.I.S Self Service APP.
IMPORTANT!
Before carrying out the operations contained in
this bulletin please perform the following campaign: L74x-A.31.24_BL4.4_Update_EN_rev01
NOTE:
It is essential that you connect an appropriate
battery charger to the charge points available in
the luggage hood (front center of the vehicle).
The voltage must remain constant above 13V: Set
the battery charger and check the voltage status
directly on O.D.I.S Service, as shown below:
2. O.D.I.S Service “Automobili Lamborghini”
post-setup update
If one of these icons appear, please proceeded to
update O.D.I.S Service.
Rev.00
CONFIDENTIAL
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
3/19
To:
Object:
Date:
Pages
L74XA.11.25
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
Repair method:
The updating procedure described here includes
the following steps:
3. In the main page of SD Creator fill out the
Model and Part Number fields:
Download SW from SD-Creator sw 419;
Enable Engineering Menu;
ECU 5F/17 update to SW 419;
ECU 0019 check DTC;
ECU 11 update to SW 0014
SVM update and configuration;
Erase fault memory;
I.
Download Software from SD-Creator
software 419
1. In order to download the necessary software
for the update procedure, open on your laptop
the software SD Creator by a double click on
the program icon.
2. When the program starts, fill in the Windows
screen fields as explained in the “BI09.17_[ENG]_SD-Creator installation package
procedures".
a. Select the Model, (Revuelto);
b. Insert the USB-C stick and type the Part
Number specific for your destination
market making reference on the table
at following point.
4. Select the Part Number related to the destination market of your vehicle:
Table of reference for control unit 5F (Infotainment System)
Part Number
Software Target
Destination Market
616.530.033.71
419
All markets except
Japan and China
5. Through the selected Part Number, the version of the ECU 5F software suitable to the selected market will be downloaded. Then, click
“Search”. The following image is only for example purposes:
Rev.00
CONFIDENTIAL
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
4/19
L74XA.11.25
To:
Object:
Date:
Pages
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
6. If the entered part number is correct, following the search, will be shown the model name
and the required size of the USB memory stick
to generate the software. E.g. image:
IMPORTANT:
Before start to download the software!
The process involves formatting the USB-C stick
and deleting the files inside it.
In order to avoid losing the data, it is advisable to
use empty USB-C stick.
Make sure that the available storage space is
larger or at least equal to the size required by SD
Creator.
7. Follow the instructions to download the software. Click the Start Button,
to start the software download process. The
software will be automatically saved in the
USB-C stick. E.g. image:
8. At the end of the process, green icons will appear on the right and positive feedback will be
displayed indicating the success of the operation. Click on the bar “
” in order to finish the download process. The USBC stick is automatically unplugged from your
laptop.
ATTENTION:
If the error shown in the following image occurs in
the download from SD Creator, perform the instructions at the end of this document, in Trouble
shooting section.
Rev.00
CONFIDENTIAL
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
5/19
L74XA.11.25
To:
Object:
Date:
Pages
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
9. To verify the success of the operation, extract
and reinsert the USB-C stick and make sure
that the software required is present. The following image is an example concerning the
folders created.
IMPORTANT:
After enabling the engineering menu, please
leave the car in sleep for 15 minutes, key off, all
doors closed and locked, OBD disconnected.
III.
At this point the downloaded software is available
on the USB-C stick and ready to be flashed on the
car.
ECU 5F update to Software 419
12. Move in the car and insert the USB-C stick
containing the downloaded software 419 in
the USB1 port located under the Navi screen
(image below).
II.
Enable Engineering Menu
10. Select the tab “Control units”, select the ECU
5F and from “Guided Functions” select “5F –
Enable Engineering Menu”, then click on
“Run”.
13. To update the ECU 5F software it is necessary
to reach the Engineering Menu through the
following commands sequence on the central
display.
11. When request, please press option 1 to enable the engineering menu.
Rev.00
CONFIDENTIAL
14. Press and hold the top center screen for a few
seconds.
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
6/19
L74XA.11.25
To:
Object:
Date:
Pages
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
15. Press “System Information” button.
18. Select the file in the second tab and then
press “Select File” button.
16. Press “Update software" button.
19. Flag the button “I Checked the SDN compatibility matrix” and then press “START” button.
17. Select USB that contain the SW (file .zip).
Rev.00
CONFIDENTIAL
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
7/19
To:
Object:
Date:
Pages
L74XA.11.25
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
20.Remove the USB-C stick only when the upload
will be ended.
21. Click on the button “Go to main menu” to return in normal visualization mode.
22. After the update, leave the car in sleep for 15
minutes, key off, all doors closed and locked,
OBD disconnected.
23. Repeat the step 10 and 11 to disable Engineering Menu.
IV.
ECU 0019 check DTC
V.
ECU 11 update to SW 0014
25. From the Lamborghini HUB, at the following
link, download and execute the flash data container:
DMS --> ROOT--> Service--> Diagnosis --> Documents --> O.D.I.S. Service --> Download -->
O.D.I.S Service Flashdatacontainer --> For Revuelto -->Lamborghini_Flash_Revuelto_BL4.6.exe
26. The following setup appear: Click on “Install”
and follow the instructions.
24. Check the DTCs from the ECU 0019: If the DTC
“C12A5F0: Vehicle electrical system configuration implausible” is present and is in “active”
status, please perform the GFF “Vehicle configuration implausible” from the Test Plan, as
shown below:
27. From the "Test plan" menu, click on the "Select
own test" box and then click on the magnifying
glass:
Rev.00
CONFIDENTIAL
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
8/19
L74XA.11.25
To:
Object:
Date:
Pages
After Sales Official Network
BL4.6 BL Update PN_47B990100C_Rev_0131_0132
/04/2025
19
28. Enter in the search bar “Update programming”. Select the function “Update programming (Beta Version)” and click on “Go to”.
29. Click on “Attach to test plan”.
31. Select the control unit type to flash. In this select option “- 1. -“, “ASAM/UDS”.
32. Specify the control unit Diagnostic Address
and then click on “Apply” box. In this case insert “11”.
11
30. If the steps are successful, the function Update programming (Beta Version)" will appear
in the Test plan. Click now on the Update programming (Beta Version)” function and then
“Perform test”.
Rev.00
CONFIDENTIAL
33. Click on “- 1. -” if the selection is correct, otherwise click “- 2. -” for repeat program or “- 3.
-” for abort program.
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of
Automobili Lamborghini S.p.A pursuant to copyright law. The company reserves the right to make updates and
modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express
written consent of Automobili Lamborghini S.p.A.
Doc. no.: L/V6_M06 Rev.[07]
9/19
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: L74X-A.11.25
Replacement Service Bulletin Number:
MFR Communication Date: 2025-04-04
MFR Internal Campaign ID/Software Version:
Communication Type: Service Campaign
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it. Note: FCA AutoAuth is a third-party service, additional cost may be required.
- 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions without annual fees for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball!
- 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
This product presentation was made with AAWP plugin.
Last update on 2026-06-06 / Affiliate links / Images from Amazon Product Advertising API