NHTSA ID Number: 11016497
Manufacturer Communication Number: Circular_19N8_20250328
TSB/Document Date: 2025-04-04
Summary
Removed expiration date, Updated part numbers in parts and claiming sections, General circular updates
Service Action
Code: 19N8
Subject
After-Run Coolant Pump
Document History
Affected Vehicles
Date
Summary
03/27/2025
Removed expiration date
Updated part numbers in parts and claiming sections
General circular updates
02/18/2020
Updated claiming and work instructions: A single part number per
criteria will now be used.
04/16/2019
Original publication
Country
USA
USA
USA
USA
USA
USA
CAN
CAN
CAN
CAN
CAN
CAN
Beginning
Model Year
2013
2013
2013
2013
2012
2013
2013
2013
2013
2013
2013
2013
Ending
Model Year
2016
2016
2017
2017
2015
2017
2016
2016
2017
2017
2015
2017
Vehicle
Vehicle Count
A4 ALLROAD
A4 SEDAN
A5 CABRIOLET
A5 COUPE
A6 SEDAN
Q5
A4 ALLROAD
A4 SEDAN
A5 CABRIOLET
A5 COUPE
A6 SEDAN
Q5
6,306
33,120
7,284
8,144
15,476
53,866
838
5,138
332
1,135
454
8,715
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
Problem Description
Corrective Action
Code Visibility
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
Power to the electric (after-run) coolant pump was disconnected under Safety Recall 19N4.
Install a new electric (after-run) coolant pump and update ECM software.
On or about April 16, 2019, affected vehicles were listed on the Inventory Vehicle Open
Campaign Action report under My Dealership Reports (found on www.accessaudi.com & OMD
Web). A list will not be posted for dealers who do not have any affected vehicles.
On or about April 16, 2019, this campaign code showed open on affected vehicles in Elsa.
On or about April 16, 2019, affected vehicles were identified with this campaign code in the VIN
Lookup tool at www.audiusa.com.
Owner Notification
Owner notification took place in April 2019. Owner letter examples are included in this bulletin
for your reference.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2025 Audi of America, Inc. and Audi Canada. All Rights Reserved.
19N8 Page 1 of 18
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Audi dealer. 2025 Audi Group of America, Inc. and Audi Canada. All Rights Reserved.
19N8 Page 2 of 18
Parts Information
Criteria
01
02 or 03
Quantity
Part Number
P.O.C. Part Description
1
06D-121-601
PUMP
1
06H-121-079-N
BRACKET
1
06H-965-559-K
PUMP
Ordering Method
Reference POC
comments individually by
part number, or in the
POC Campaign List
NOTE
Your dealer’s Estimated Remaining Repairs by campaign can be found in Parts on Command.
Click on “View Campaign List” and review the Estimated Remaining Repairs column.
NOTE
Campaign parts should always be ordered as per the parts information in this circular. The ordering system will
supersede the part, if applicable.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Audi dealer. 2025 Audi Group of America, Inc. and Audi Canada. All Rights Reserved.
19N8 Page 3 of 18
Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If a customer declines campaign work, refer to the “Customer Declines Campaign/Update Repair” section in the
Campaign/Update Policy and Procedures Manual.
Service Number
19N8
Damage Code
0099
Parts Vendor Code
Claim Type
002
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Criteria I.D.
Mark PUMP* as causal part
Do not claim wash/loaner under this action
01
Remove connector plug, install after-run coolant pump and update ECM software
LABOR
Labor Op
Time Units
Description
1947 55 99
70
Remove connector plug, install after-run coolant
pump
2706 89 50
SEE ELSA
Charge battery
2470 25 99
Time stated on
diagnostic protocol
Software update
(GFF Operations)
PARTS
Quantity
Part Number
Description
1.00
06D121601
PUMP*
1.00
06H121079N
BRACKET
Continued on next page
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2025 Audi of America, Inc. and Audi Canada. All Rights Reserved.
19N8 Page 4 of 18
Criteria I.D.
02 or 03
Remove connector plug, install after-run coolant pump and update ECM software
LABOR
Labor Op
Time Units
Description
1947 55 99
70
Remove connector plug, install after-run coolant
pump
2706 89 50
SEE ELSA
Charge battery
2470 25 99
Time stated on
diagnostic protocol
Software update
(GFF Operations)
PARTS
AND
Quantity
Part Number
Description
1.00
06H965559K
PUMP*
Add the following, as needed, ONLY if after-run coolant pump connector found
damaged)
LABOR
Labor Op
Time Units
Description
1947 55 99
70
Remove connector plug, install after-run coolant
pump
PARTS
Quantity
Part Number
Description
Up to 1.00
000979940
Butt connector for 0.5 mm wire
Up to 2.00
000979941
Butt connector for 1.0 mm wire
Up to 1.00
000979034E
0.5 mm wire
Up to 1.00
000979159E
1.0 mm wire
Up to 3.00
3C0972741
Up to 1.00
4H0973703
Connector housing
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2025 Audi of America, Inc. and Audi Canada. All Rights Reserved.
19N8 Page 5 of 18
Customer Letter Example (USA)
This notice applies to your vehicle: ,
Subject: Service Action 19N8 – Electric (After-Run) Coolant Pump
Certain 2012-2017 Model Year Audi Vehicles with a 2.0L TFSI Gasoline Engine
Dear Audi Owner,
As part of Audi’s ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a
service action on certain 2012-2017 model year Audi vehicles. Our records show that you are the owner of a vehicle
affected by this action.
About this Service Action:
Power to the electric (after-run) coolant pump in your vehicle was disconnected under Safety Recall 19N4.
Your authorized Audi dealer will install a new electric (after-run) coolant pump and update the Engine Control
Module (ECM) software in your vehicle. This work will take about one (1) hour to complete and will be performed
for you free of charge.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi dealer as soon as possible to
schedule this work. For your convenience, you can also visit www.audiusa.com and click on the “Find a Dealer” link
to locate a dealer near you and schedule this service.
Additional Information
•
If you are the lessor and registered owner of the vehicle identified in this action, please forward this letter
immediately via first-class mail to the lessee within ten (10) days of receipt.
•
If your authorized Audi dealer fails or is unable to complete this work free of charge within a reasonable
time, if you have changed your address or no longer own the vehicle identified in this letter, or if you should
have any questions about this communication, please contact Audi Customer Experience at 1-800-2532834 or via our “Contact Us” page at www.audiusa.com.
•
To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit the
Recall/Service Campaign Lookup tool at www.audiusa.com and enter your Vehicle Identification Number
(VIN).
We apologize for any inconvenience this matter may cause; however, we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2025 Audi of America, Inc. and Audi Canada. All Rights Reserved.
19N8 Page 6 of 18
Customer Letter Example (Canada)
This notice applies to your vehicle: ,
Subject: Service Action 19N8 – Electric (After-Run) Coolant Pump
Certain 2013-2017 Model Year Audi Vehicles with a 2.0L TFSI Gasoline Engine
Dear Audi Owner,
As part of Audi’s ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a service
action on certain 2013-2017 model year Audi vehicles. Our records show that you are the owner of a vehicle affected by
this action.
About this Service Action:
Power to the electric (after-run) coolant pump in your vehicle was disconnected under Safety Recall 19N4. Your authorized
Audi dealer will install a new electric (after-run) coolant pump and update the Engine Control Module (ECM) software in
your vehicle. This work will take about one (1) hour to complete and will be performed for you free of charge. Please keep
in mind that your dealer may need additional time for the preparation of the work, as well as to accommodate their daily
workshop schedule.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi dealer as soon as possible to schedule
this work.
Additional Information
•
If you are the lessor and registered owner of the vehicle identified in this action, please forward this letter
immediately via first-class mail to the lessee within ten (10) days of receipt.
•
If your authorized Audi dealer fails or is unable to complete this work free of charge within a reasonable time, if you
have changed your address or no longer own the vehicle identified in this letter, or if you should have any questions
about this communication, please contact Audi Customer Relations Monday through Friday from 8AM to 8PM EST
at 1-800-822-2834 or via our “Contact Audi Canada” page at www.audi.ca.
We apologize for any inconvenience this matter may cause; however, we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2025 Audi of America, Inc. and Audi Canada. All Rights Reserved.
19N8 Page 7 of 18
Repair Overview
•
Remove connector plug, install new after-run
coolant pump and update ECM software.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular_19N8_20250328
Replacement Service Bulletin Number:
MFR Communication Date: 2025-03-27
MFR Internal Campaign ID/Software Version: 19N8
Communication Type: Service Campaign
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 📞【Warm Tips】Dear friend, if you have any issues or need any tech support after receiving your MK900BT (received a registered item/ language changing/ functions compatibility/ renew subscription, etc.), please don't hesitate to tell us directly via 💌Autelonline @ outlook . com💌, we will do whatever we can to help you at first time. Besides, if you need other accessories, such as Autel endoscope MV108S, please don't hesitate to con-tact us.
- 🔥【Amazon Choice MK900BT, 2026 Newer of MK900 MX900 MS906 MK808BT PRO MP808S MK808S MX808S】Big News! 2026 Autel most cost-effective 8in All System & Bidirectional Scan Tool MK900BT is born! 619 only, yet featuring 40+ Hot Services same as MaxiSys Ultra/ Elite II/ MK908P/ MS906 PRO, among lots of advanced & newer functions: ✅3000+ Active Tests ✅CAN FD/ DoIP new protocols ✅Full Diagnosis ✅5-in-1 Live Data ✅Pre & Post Scan ✅Scan VIN/License ✅WiFi Print ✅FAC AutoAuth & Renault SGW, etc.
- 😊【Why Choose Autel Scanner MK900-BT, Not MK808S MK900 MX900?】➊ MK900BT escaner automotriz designs with Autel MaxiVCI V150, adopting advanced German Wireless Technology with more stable&faster data transmission, allowing you to work in and around vehicles with a 10M/33FT remote diagnostics. Instead, at almost the same b.udget, MK900 MK808S outdated wired code reader only with 1m cable, so you must curl up on the steering wheel! ➋ MK900BT can work with Autel BT506 to perform professional cranking charging system tests and in-vehicle & out-of-vehicle battery tests, but MK900 MK808S CANNOT. Some sellers say MK900 can work with BT506, pls don't believe it, who are not Autel a.uthorized sellers.
- 🚀【Upgraded Hardware 2.0, 10X F.aster than Ever】Based on old Android 4.4.4 ver. of MX808 MK808 MK808BT MP808 MP808BT MS906 MS906BT, Autel scan tool MK900-BT takes a big leap to 🟢f.astest OS 11 🟢4-core, 1.8GHz RK3566 speed boosted + lower power consumption🔋doubled 7700mAh Battery 🟢larger & sharper 8" 1280*800 touchscreen with intuitive user interface 🟢expanded 4+64G enough to save more files/data 🟢8M Rear camera gives clearer snapshot, etc. MK900BT scanner for car, is the best bang for your b.uck in the category.
- 📢【New Released: CAN FD/DoIP + WIFI Print + Pre & Post Scan + Scan VIN/ License】MK900BT OBD2 scanner diagnostic tool updates lots of advanced features previously available only for scanners above 2000 (MS906 Pro MS908S Pro, etc.) ✅New protocols CAN FD works for GM 2019+ ✅DOIP works for Volv.o 2018+, Jaguar&Land Rover 2017+, BM.W F&G chassis models ✅Same WIFI Print as MaxiSys Ultra ✅Detailed Pre/ Post scan reports to up repair efficiency ✅Scan VIN/License can identify your cars in seconds, more accurately! But Autel MK808S/ MK808BT PRO cannot.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.