NHTSA ID Number: 11014071
Manufacturer Communication Number: NTB24-061
TSB/Document Date: 2025-02-10
Summary
VOLUNTARY EMISSIONS RECALL CAMPAIGN 2016-2017 TITAN XD DIESEL; PM SENSOR INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2016-2017 Titan XD vehicles equipped with a diesel engine, to install a Particulate Matter (PM) Sensor and reprogram the Engine Control Module (ECM). This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PD128 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary emissions recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
Select Re/programming, Configuration.
Figure 68
34/47
NTB24-061
68.
Confirm if ECM reprogramming applies:
a.
Find the ECM Part Number and write it on the repair order.
HINT: This is the current ECM Part Number (P/N).
xxxxxxxxxxxxxxxxx
xxxxxxxxxxxxx
Current ECM P/N
xxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
xxxxxxxxxxx
Figure 69
A.
b.
Compare the P/N you wrote down to the numbers in the CURRENT ECM PART
NUMBER column in Table A below.
If there is a match, continue with the reprogramming procedure.
If there is not a match, reprogramming is not needed; skip to CLAIMS
INFORMATION on the last page.
Table A
MODEL YEAR
2016 - 2017
CURRENT ECM PART NUMBER: 23710EZ41C, EZ41D, EZ41E
EZ42A, EZ42B, EZ42C, EZ42D, EZ42E
EZ43A, EZ43B, EZ44D, EZ44E
EZ45A, EZ45B, EZ45C EZ45D, EZ45E
EZ46A, EZ46B, EZ46C
35/47
NTB24-061
69.
Follow the on-screen instructions to navigate C-III plus and reprogram the ECM.
If the screen in Figure 70 displays, reprogramming is complete. Skip to step 71
on page 39.
If the screen in Figure 70 does not display (indicating that reprogramming did
not complete), continue to step 70 on page 37.
Figure 70
36/47
NTB24-061
70.
Did Error Code “15-2-1-No_Boot_Mode” shown in Figure 71 display, (indicating that
reprogramming did not complete)?
YES: Select Retry.
o
If the same Error Code occurs after selecting Retry, restart C-III plus and
retry reprogramming by continuing the operation log.
NO: Refer to ECM Recovery on the next page.
23710-xxxxx
23710-xxxxx
xxxxxxxxxxxxxxxxx
Figure 71
37/47
NTB24-061
ECM Recovery
Do not disconnect the plus VI or shut down C-III plus if reprogramming does not
complete.
If reprogramming does not complete and the “!?” icon displays as shown in
Figure 72:
Check battery voltage
(12.0 - 13.5 V).
Ignition is ON, engine OFF.
External Bluetooth® devices
are OFF.
All electrical loads are OFF.
Select retry and follow the
on screen instructions.
“Retry” may not go through on
first attempt and can be
selected more than once.
xxxxxx
xxxxxxxxxxx
xxxxxxxxxxx
Figure 72
If reprogramming does not complete and the “X” icon displays as shown in
Figure 73:
Check battery voltage
(12.0 - 13.5 V).
CONSULT A/C adapter is
plugged in.
Ignition is ON, engine OFF.
Transmission is in Park.
All C-III plus / VI cables are
securely connected.
All C-III plus updates are
installed.
Select Home, and restart
the reprogram procedure
from the beginning.
xxxxxx
xxxxxxxxxxx
xxxxxxxxxxx
Figure 73
38/47
NTB24-061
71.
Select Next.
Figure 74
72.
Follow the on-screen instructions to Erase DTCs.
DTC erase is required before C-III plus will provide the final reprogramming
confirmation report.
73.
When the entire reprogramming process is complete, the screen in Figure 75 will
display.
74.
Verify the before and after part numbers are different.
75.
Print a copy of this screen and attach it to the repair order for warranty
documentation.
76.
Select Confirm.
39/47
NTB24-061
xxxxxx
xxxxxx
xxxxxxx
xxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
Figure 75
40/47
NTB24-061
77.
Return to the C-III- plus Home screen.
78.
Confirm the ignition is ON, with engine OFF.
79.
Confirm the VI is recognized.
80.
The serial number will be displayed when the VI is recognized.
Select Diagnosis (One System).
VI is
recognized
Figure 76
41/47
NTB24-061
81.
Navigate C-III plus to ENGINE > Work support.
82.
Select WRITE SAVED DATA.
83.
Select Start.
Figure 77
84.
Confirm the ignition is ON with the engine OFF (engine not running).
42/47
NTB24-061
85.
Select Confirm.
Figure 78
86.
Wait for the procedure to complete.
Figure 79
43/47
NTB24-061
87.
Select End.
Figure 80
88.
Close C-III plus by selecting the “X” in the upper right hand corner.
89.
Turn the ignition OFF.
90.
Turn the hazard warning lamps OFF.
91.
Disconnect and remove the VI from the vehicle.
92.
Disconnect the battery maintainer/smart charger.
93.
Close the hood.
44/47
NTB24-061
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
PM SENSOR UPFIT KIT
22793-EZ41A
1
EXHAUST GAS BRACKET
22644-EZ42E
1
BOLTS (2 required)
081A0-8201A
1
BOLTS (2 required)
081A6-6252A
1
PARTS CROSS REFERENCE LIST (PM SENSOR UPFIT KIT)
The following table lists all of the individual parts in the PM SENSOR UPFIT KIT
(22793-EZ41A) plus a cross reference to Cummins part numbers.
DESCRIPTION
NISSAN PART NUMBER CUMMINS PART NUMBER
QTY:
PARTICULATE
MATTER SENSOR
227A3-EZ41B
5461551
1
HARNESS - WIRING
22159-EZ41A
5518128
1
BRACKET MOUNTING
22795-EZ41A
5517961
1
GASKET BRACKET
20691-EZ41A
5517963
1
CLAMP – U-BOLT
22095-EZ41A
5517962
2
PAPER TEMPLATE
226B0-EZ41A
5518101
1
ROTOR – HEAD
(Step Drill Bit)
22157-EZ41A
5518102
1
45/47
NTB24-061
Figure 81
PM Sensor Upfit Kit
Figure 82
46/47
NTB24-061
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID
DESCRIPTION
OP CODE
FRT
PD128
Install PM Sensor and Reprogram ECM
PD1280
1.6
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
January 30, 2025
NTB24-061
DESCRIPTION
Original bulletin published
47/47
NTB24-061
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB24-061
Replacement Service Bulletin Number:
MFR Communication Date: 2025-01-30
MFR Internal Campaign ID/Software Version: PD128
Communication Type: Emissions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
Autoauth, OE-
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.