UPDATE PRIOR TO SALE NOTICE
Subject:

Global Service Action
Number: N956 UPS5725-1

Publication No.: N956 UPS5725-1

Vacuum Hose Blanking Plug - Inspection

Model: Range Rover Velar (LY)
Model Year: 2025
Date of Issue: 12 December 2024
Expiry Date: 12 December 2025

To:

All National Sales Companies (NSCs), importers, retailers and authorized repairers.

For the
Attention of:

The approved JLR retailer / authorized repairer.

Important:

Rest of World: Quarantine in JLR retailer / authorized repairer or applicable NSC location.
NOTE: The information in this campaign is intended for use by professional technicians.If you are not a
JLR retailer / authorized repairer, do not assume that a condition described affects a specific vehicle.
Contact an authorized JLR retailer / authorized repairer to determine if this campaign applies to a specific
vehicle.
This campaign has been issued to provide the relevant repair instructions, parts and warranty information.
This campaign is valid for one year only. Repairs must be completed prior to the expiry date at the top of
this campaign.
This campaign does not apply to any vehicles already registered and in use, either with the JLR retailer /
authorized repairer, or customer. Any vehicle already in use may continue to be driven and any repair
instructions will be communicated through a separate campaign.

FOR THE ATTENTION OF ALL:
DESCRIPTION OF ISSUE
A potential concern has been identified on specific vehicles within the above vehicle range.
Certain 2025 model year Range Rover Velar vehicles may have the transportation cap left installed.
ACTION TO BE TAKEN
This campaign directs JLR retailers / authorized repairers to quarantine any unsold vehicles in the affected vehicle range.
Check the JLR Warranty Portal to make sure affected vehicles are correctly identified prior to starting this campaign. The Warranty
Portal will be updated to reflect only those vehicles affected.
JLR retailers / authorized repairers are reminded that they must not sell vehicles identified as affected by this campaign until such
time as the repair has been successfully completed.
Refer to the warranty section of this campaign for details of the Related Damage Process. At the time of confirming a booking for a
vehicle repair, make sure you check the Warranty Portal to confirm if there are any other outstanding campaigns, to make sure the
correct parts are available and adequate workshop time is allocated for repairs to be completed in one visit.
CUSTOMER COMMUNICATION
Should this campaign mean that you are unable to deliver an affected vehicle to a customer at an agreed handover date, advise the
customer of the following:
'JLR are committed to delivering vehicles to our customers of the highest quality, complete with the very latest hardware and
software. Our vehicles are continually evolving with our Engineering and Design teams constantly looking for new and innovative
ways to further enhance and develop our vehicles. JLR have advised us that there is an upgrade to be completed on your vehicle
and have instructed us to complete this action prior to handing the vehicle over to you. JLR apologize that this upgrade may delay
the delivery of your new vehicle but are committed to make sure customers benefit from the very latest technology to make sure your
ownership experience is the best possible.'
If necessary, you may communicate technical details of the repair or upgrade that is required on the vehicle, this is at your discretion.
RETAILER EMPOWERMENT
We appreciate the frustration experienced by both our customers and retailers with regards to the launch of any Update Prior to Sale
(UPS) notice.
Following the launch of Retailer Empowerment (and where you feel it appropriate), you now have the ability to offer goodwill to
customers who have suffered delays in the delivery of their vehicle. Any goodwill offer should be specifically for a customer whose
vehicle delivery has been delayed due to UPS activity to acknowledge the poor experience.
Should you have any questions, contact the Customer Relationship Center (CRC) in the first instance for help and support.



The following applies to:
[NORTH AMERICA]

FOR THE ATTENTION OF NORTH AMERICAN TERRITORIES ONLY:



The following applies to:
[NORTH AMERICA]

Visit the British Brands Sales Suite (BBSS) website for a list of affected vehicles at your JLR retailer / authorized repairer. Unsold
vehicles must be repaired prior to handover of the vehicle for retail sale.

Yours faithfully
Steve Oldham
Global Customer Care Quality Director

SERVICE INSTRUCTION - N956 UPS5725-1
Parts Information
The parts below should be ordered through JLR in the normal manner.
Description Part Number Qty % Of Vehicles Requiring This Part*
Blanking Plug LR137621

1

3.8

* When ordering parts, order no more than the expected percentage failure rate of parts identified

SROs
Description
Inspect vacuum pipe - No further action

SRO

Time

05.10.10 0.1

Inspect vacuum pipe - Install blanking plug 05.10.10 0.1
Drive in/drive out

02.02.02 0.2

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to
TOPIx to obtain the latest repair time.

Warranty Information
Warranty claims should be submitted quoting program code N956 with the relevant option code from the table below. As option codes are used there is no requirement
for you to enter SROs or parts, these are included for information only.
Program Code Option

Description

SRO

Time Part Number Qty

N956

A

Inspect vacuum pipe - No further action

05.10.10 0.1

N/A

N/A

N956

B

Inspect vacuum pipe - No further action
Drive in/drive out

05.10.10 0.1
02.02.02 0.2

N/A

N/A

N956

C

Inspect vacuum pipe - Install blanking plug 05.10.10 0.1

LR137621

1

N956

D

Inspect vacuum pipe - Install blanking plug 05.10.10 0.1
Drive in/drive out
02.02.02 0.2

LR137621

1

NOTE:
The option that contains the drive in/drive out allowance may only be claimed when the vehicle has been brought back into the workshop for this action alone to
be undertaken.
Warranty claims should be submitted in accordance with the current JLR Global Warranty Manual, and its amendments, unless stated otherwise in this campaign.

Customer Reimbursement and Related Damage Process
NOTE:
If there is a requirement to claim for related/consequential damage or customer reimbursement, refer to the related instruction that can be found in TOPIx (in the
Search box, search for 'Related Damage Claim' and open the related bulletin link).

SERVICE INSTRUCTION
NOTES:
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.
1. Open the hood.

2. Inspect the vacuum pipe.




If the vacuum pipe blanking plug is installed as shown in the illustration
with the GREEN ✓ , continue to step 4.
If the vacuum pipe blanking plug is not installed as shown in the
illustrations with the RED X, continue to step 3.

3. Install a new vacuum pipe blanking plug.
Remove and discard the vacuum pipe transport plug.
Install the vacuum pipe blanking plug.



4. Close the hood.