GROUP

MODEL

GEN

2023-2024MY
Multiple Models

NUMBER

DATE

099 (Rev 2, 9/12/2024)

February 2024

TECHNICAL SERVICE BULLETIN
SERVICE ACTION: TIRE MOBILITY KIT

SUBJECT:

INSPECTION & REPLACEMENT/REPAIR (SA556)
 NOTICE
This bulletin has been revised to include additional information. New/revised sections of this
bulletin are indicated by a black bar in the margin area.
This bulletin provides information to inspect, and if necessary, replace the Tire Mobility Kit (TMK) sealant can
or sealant can cap on certain 2023-2024MY Kia vehicles listed on page 7. Lower ambient temperatures can
create a vacuum effect inside the TMK sealant can, causing the sealant can cap to open, resulting in the tire
sealant leaking. Follow the procedure outlined in this publication to inspect, and if necessary, replace the
sealant can or sealant can cap on the applicable vehicle. Before conducting the procedure, verify that the
vehicle is included in the list of affected VINs.

 NOTICE
A Service Action is a repair program without customer notification that is performed during the
warranty period. Any dealer requesting to perform this repair outside the warranty period will
require DPSM approval.
Repair status for a VIN is provided on KDealer+ (Service → Warranty Coverage → Warranty
Coverage Inquiry → Campaign Information). Not completed Recall / Service Action reports are
available on KDealer+ (Consumer Affairs → Not Completed Recall → Recall VIN → Select Report),
which includes a list of affected vehicles.
This issue number is SA556.
A printed copy is for reference only; publication information can be updated at any time.
Always refer to KGIS for the latest information. After logging in kdealer.com, the newest technical
publications are listed in ‘Service Releases’ and has the latest service information that has been released.

Page 2 of 7

TIRE MOBILITY KIT INSPECTION & REPLACEMENT/REPAIR (SA556)

SUBJECT:

Inspection Procedure:
1.

Open the trunk lid.

2.

Remove the luggage board (A).

A
+

3.

Remove the Tire Mobility Kit (TMK) sealant can
(B).

B

Note: If the TMK sealant can is missing, no
further action required. Claim ‘TMK Inspection
Only’ Labor Op.
SA566A – Claim Labor Op 230M11I0

BDm

SA566B – Claim Labor Op 230M11I1
SA566C – Claim Labor Op 240089I0

B

SG2 P/HEV, SG2 EV, CV GT
•

If sealant has not leaked from the TMK
can (B) (OK), proceed to step 4.

B

BDm

SG2 P/HEV, SG2 EV, CV GT
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA556 (Rev 2) Multiple Models February 2024

Page 3 of 7

TIRE MOBILITY KIT INSPECTION & REPLACEMENT/REPAIR (SA556)

SUBJECT:

•

If sealant has leaked from the TMK
sealant can (NG), replace the sealant
can (B), take one (1) clear KVID photo
and

proceed

to

B

‘Replacement

Procedure’ on page 5.
SA566A – Claim Labor Op 230M11R2
SA566B – Claim Labor Op 230M11R4

BDm

SA566C – Claim Labor Op 240089R1

 IMPORTANT
B

If leaked sealant has penetrated the
inflator bag, test the inflator (C) for
proper operation. If inflator and/or other
damaged parts require replacement
due to leaked sealant, follow normal
warranty procedures and attach a KVID

SG2 P/HEV, SG2 EV, CV GT

photo of the damaged component to
the warranty claim.

C

4.

Remove sealant can (B) from the bag and

D

position horizontally so the spout is facing
downward.
•

If sealant has not leaked from the
sealant can cap (D) (OK), proceed to
the ‘Repair Procedure’ on page 4.

•

If sealant has leaked from the sealant

B

can cap (D) (NG), replace the sealant
can (B), take one (1) clear KVID photo
and

proceed

to

‘Replacement

Procedure’ on page 5.
SA566A – Claim Labor Op 230M11R2
SA566B – Claim Labor Op 230M11R4
SA566C – Claim Labor Op 240089R1
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA556 (Rev 2) Multiple Models February 2024

Page 4 of 7
SUBJECT:

TIRE MOBILITY KIT INSPECTION & REPLACEMENT/REPAIR (SA556)

Repair Procedure:
1.

Remove the sealant can (A) from the bag.

2.

Twist the sealant can cap (B) counterclockwise
to remove from the sealant can (A).

B

Note: Discard old sealant can cap (B).

A
3.

Install the new sealant can cap (B) provided in
the repair kit (PN 52932 M7000QQK).

B

4.

Insert the sealant can (A) and leaflet (C) in the
new provided bag (D).

D
C

A
5.

Insert the sealant can ensuring the yellow cap
(E) is facing upright and take one (1) clear KVID
photo.

E

6.

Reinstall all removed parts in reverse order of
removal.

Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA556 (Rev 2) Multiple Models February 2024

Page 5 of 7
SUBJECT:

TIRE MOBILITY KIT INSPECTION & REPLACEMENT/REPAIR (SA556)

Replacement Procedure: (BDm)
1.

Insert the NEW sealant can (A) ensuring the
yellow cap (B) is facing upright and take one
(1) clear KVID photo.

B

A
S

2.

Reinstall all removed parts in reverse order of removal.

Replacement Procedure: (SG2 PHEV, CV GT)
1.

Replace TMK bag assembly (A).

A

2.

Reinstall all removed parts in reverse order of removal.

Replacement Procedure: (SG2 HEV, EV)
1.

Insert the NEW sealant can (A) ensuring the
yellow cap (B) is facing upright and take one
(1) clear KVID photo.

A

2.

B

Reinstall all removed parts in reverse order of removal.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA556 (Rev 2) Multiple Models February 2024

Page 6 of 7

TIRE MOBILITY KIT INSPECTION & REPLACEMENT/REPAIR (SA556)

SUBJECT:

AFFECTED VEHICLE RANGE:
Model

Production Date Range

Forte (BDm)

March 01, 2023 to November 30, 2023

EV6 (CV)

March 1, 2023 to December 29, 2023

Niro HEV (SG2 HEV)

July 1, 2023 to December 30, 2023

Niro PHEV (SG2 PHEV)

July 3, 2023 to December 30, 2023

Niro EV (SG2 EV)

July 3, 2023 to December 30, 2023

REQUIRED PART:
Model

Part Name

BDm

Part Number

Figure

52932 AA300QQK
Sealant Can

SG2 HEV

1
52932 AA300QQK

SG2 EV
BDm
SG2 P/HEV

Qty.

52932 M7000QQK
Repair Kit

SG2 EV

1
09131 N1001QQK

CV GT
SG2 PHEV

09100 AT500QQK
1

TMK Bag Assembly

CV GT

09130 CV300QQK

Note: The replacement part numbers will require a VIN entry for parts ordering. DO NOT order these parts for
stocking purposes, related to this Service Action. Supply is very limited. Until supply stabilizes, please confirm
part availability before scheduling customers. Please be sure to expedite warranty claim filing.

Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA556 (Rev 2) Multiple Models February 2024

Page 7 of 7

TIRE MOBILITY KIT INSPECTION & REPLACEMENT/REPAIR (SA556)

SUBJECT:

WARRANTY INFORMATION:
N Code: N99 C Code: C99
Model

Claim

Causal

Type

P/N

Qty.

Repair

Labor Op

Op

Replacement

Description

Code

Time

P/N

(SA556A)
TMK Inspection (OK) +

230M11R1**

Repair
BDm

V

52933
AA120

0

(SA556A)
TMK Inspection (NG) +

230M11R2*

Replacement
(SA566A)
TMK Inspection Only

230M11I0

(SA556B)
TMK Inspection (OK) +

230M11R3**

Repair
BDm

V

52933
AA120

0

(SA556B)
TMK Inspection (NG) +

230M11R4*

Replacement
(SA566B)
TMK Inspection Only
SG2

230M11I1

(SA556C)

P/HEV,

TMK Inspection (OK) +

EV

240089R4**

Repair

CV GT
SG2

0.3
M/H
0.2
M/H
0.1
M/H
0.3
M/H
0.2
M/H
0.1
M/H
0.3
M/H

240089R1*

PHEV
CV GT

V

SG2

52933
AA120

(SA556C)
0

TMK Inspection (NG) +

240089R2*

52932 M7000QQK

1

52932 AA300QQK

1

N/A

0

52932 M7000QQK

1

52932 AA300QQK

1

N/A

0

09131 N1001QQK

1

09100 AT500QQK

1

09130 CV300QQK

1

52932 AA300QQK

1

N/A

0

M/H

Replacement

HEV,

0.2

Qty.

240089R3*

EV
SG2
P/HEV,

(SA556C)

EV

TMK Inspection Only

240089I0

0.1
M/H

CV GT

Note: A total of up to two (2) KVID photos are required for claim submission.
*A KVID photo of the leaking sealant can is required to claim Labor Op 230M11R2, 230M11R4,
240089R1, 240089R2, and 240089R3.
**A KVID photo showing the installation of the sealant can ensuring the yellow cap (E) faces upright is
required for ALL Labor Op’s. Failure to provide the required KVID photos will result in claim rejection
or chargeback. Use sublet code ‘X1’ with a maximum allowed amount of $30.00 per vehicle to clean
leaked sealant from the trunk area.

 NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference
SA556 when accessing the KDealer+ system.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA556 (Rev 2) Multiple Models February 2024