SURRION PROPER STORAGE OF A FURRION MODEL 2
= a
. FCR2Z0DCAFA REFRIGERATOR FS
REFRIGERATORS
Purpose
This document outlines the procedures for proper storage of Furrion refrigerators.
Proper Storage Information

Properly storing the refrigerator can prevent irregular cooling performance and help combat component

damage. If the refrigerator is not properly turned off (stored) it continues to operate while in storage,

causing the appliance to overwork in extreme conditions beyond its intended design. The refrigerator

control then detects an erroneous operating parameter/condition and locks out the systems to protect itself

until power is reset. To prevent system lock-out, perform the following proper storage steps.

Failure to follow proper storage procedures for the refrigerator could result in product damage and/or
voiding the warranty.
Proper Storage Procedures for Model FCRZ0DCAFA lid a 10
af
it, La ar

NOTE: Also see video detailing the procedures: bad 4

https://support.Icil.com/videos/proper-storage-and-reset-of-a-furrion-model-fcr20dcafa- *"#*4 Bry CT

refrigerator or scan the QR code. Oo ter a,

If the unit/appliance is in storage (closed up/not in use) the refrigerator model # FCRZ0DCAFA should always

be turned off using the controls of the refrigerator. The battery disconnect is NOT sufficient for ensuring the

refrigerator is off. Physically turning off the refrigerator is required per the below instructions.

1. Locate the user control panel on the front of the refrigerator.

2. Press and hold down the "Mode" and "Lock" buttons (Fig. 1A) on the control panel for 10 seconds. The
control panel lights will turn off. But the interior light will stay on for 3 minutes. If it stays on after 3
minutes, disconnect the battery.

3. Keep the doors open for air circulation to keep the cavity dry.

Fig. 1
| :
|
sad | iA
Rev: 08.22.2024 Page 1 CCD-0008582

_ PROPER STORAGE OF A FURRION MODEL 2
=>URRION T
FCR2Z0DCAFA REFRIGERATOR FS
REFRIGERATORS
NOTE: For extended storage, including winterization, the battery should also be removed and maintained properly.
NOTE: If provided, install the storage lock to keep the door(s) propped and locked open for ventilation.
Extended Storage and Winterization for Model FCR20DCAFA
1. Follow steps1-3 in the "Proper Storage Procedures for Model FCR20DCAFA section of this Quick
Reference Document.
2. Remove the battery from the coach.
NOTE: Maintain the battery for the duration of storage per the manufacturer's specifications.
3. Disconnect the solar panel(s) from the electrical system.
4. Disconnect shore power from the coach.
Bringing the Coach and Refrigerator Out of Storage
1. Reverse any steps taken to store the coach depending on the length of time stored. (Reconnect shore
power and solar panels if disconnected, reinstall and hook up coach battery, etc.)
2. Toturnon the refrigerator, press and hold down the "Mode" and "Lock" buttons (Fig. 2A) on the
control panel for 10 seconds. This will turn the refrigerator back on.
Fig. 2
}
|
1| |
= | iA
NOTE: If the refrigerator is not functioning correctly after coming out of proper storage - i.e. lights do not
come on or refrigerator is not cool after being on at least two hours - a Hard Reset may be required.
See "Troubleshooting" for hard reset instructions. The hard reset process involves removing shore
power, battery power and solar power.
Rev: 08.22.2024 Page 2 CCD-0008582

a
_ PROPER STORAGE OF A FURRION MODEL C)
=URRION i
FCR2Z0DCAFA REFRIGERATOR 3
REFRIGERATORS
Troubleshooting
Reset By Disconnecting Power (Hard Reset
For additional information, see also QR-182 - 12V Refrigerator Hard Reset Procedure: https://Ici-support-doc.
s3.amazonaws.com/qr/ccd-0008369.pdf
Pe ea Del
Also see video detailing procedure: Tey La ae
https://support.Ici1.com/videos/how-to-hard-reset-a-furrion-refrigerator or scan the QR code. afte Sta
Arete
1. Remove the unit from shore power (120V AC).
2. Disconnect all battery negative terminals and then remove all battery positive terminals.
NOTE: Using a battery disconnect in place of disconnecting the battery's negative terminal is not sufficient
for disconnecting the battery because the refrigerator may be directly connected to the battery.
3. If equipped, disconnect any solar systems to the unit (12V DC).
4. — Check for quick disconnects.
5. Make sure all lights are off inside the appliance.
6. Confirm power has been removed by opening and closing the door to make sure all lights are off.
7. If applicable, also confirm the control panel display is unresponsive.
8. Wait five to 10 minutes.
9. Restore power.
Customer Service Contact
If the issue does not seem resolved, contact Lippert Care Center directly by calling 432-LIPPERT (432-547-
7378) or email [email protected].
Asa supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are
our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at [email protected].
Self-help tips, technical documents, product videos and a training class schedule are available at lippert.com or by downloading the LippertNOW app.