VciPPERT PROPER STORAGE OF GIRARD® REFRIGERATORS 4
=
MODEL NO: GRF16DBGS FS
REFRIGERATORS
Purpose
This document outlines the procedures for proper storage of Girard refrigerators.
Proper Storage Information
Properly storing the refrigerator can prevent irregular cooling performance and help combat component
damage. If the refrigerator is not properly turned off (stored) it continues to operate while in storage,
causing the appliance to overwork in extreme conditions beyond its intended design. The refrigerator
control then detects an erroneous operating parameter/condition and locks out the systems to protect itself
until power is reset. To prevent system lock-out, perform the following proper storage steps.
Failure to follow proper storage procedures for the refrigerator could result in product damage and/or
voiding the warranty.
Proper Storage Procedures for Model GRF16DBGS
If the unit/appliance is in storage (closed up/not in use) the refrigerator model # GRF16DBGS should always
be turned off using the controls of the refrigerator. The battery disconnect is NOT sufficient for ensuring the
refrigerator is off. Physically turning off the refrigerator is required per the below instructions.
1. Locate the user control panel on the front of the refrigerator.
2. Long press Function button (Fig. 1A) for 5 seconds to turn the refrigerator’s LOW POWER mode on/off.
Fig.1
Refrigerator ag"
temperature display id
Lad Refrigerator
Freezer - 2 Agr | temperature control
temperature display ae Freezer temperature
Super fridge icon | control
P 9 | a8 Super freezericon
Off grid vacation mode |
(Holiday Mode) icon | ne, Function button
Lock/Unlock display | ry
| ~ | Lock/Unlock button
Rev: 08.22.2024 Page 1 CCD-0008374

VciPPERT PROPER STORAGE OF GIRARD® REFRIGERATORS 4
=
MODEL NO: GRF16DBGS FS
REFRIGERATORS
3. Keep the doors open for air circulation to keep the cavity dry.
NOTE: For extended storage, including winterization, the battery should also be removed and maintained properly.
NOTE: If provided, install the storage lock to keep the door(s) propped and locked open for ventilation.
Extended Storage and Winterization for Model GFR16DBGS
1. Follow steps1-5 in the "Proper Storage Procedures for Model GFR16DBGS" section of this Quick
Reference Document.
2. Remove the battery from the coach.
NOTE: Maintain the battery for the duration of storage per the manufacturer's specifications.
3. Disconnect the solar panel(s) from the electrical system.
4. Disconnect shore power from the coach.
Bringing the Coach and Refrigerator Out of Storage
1. Reverse any steps taken to store the coach depending on the length of time stored. (Reconnect shore
power and solar panels if disconnected, reinstall and hook up coach battery, etc.)
2. Temperature displays illuminates with -- (Fig. 2A), long press Function button (Fig. 2B) for 5 seconds to
turn refrigerator back on.
aT: ay
(Y
== F
Fatee
. —F
Freese
@
recon
B
test
Rev: 08.22.2024 Page 2 CCD-0008374

a)
ViiPPeRT PROPER STORAGE OF GIRARD® REFRIGERATORS 8
MODEL NO: GRF16DBGS FS
REFRIGERATORS
NOTE: If the refrigerator is not functioning correctly after coming out of proper storage - i.e. lights do not
come on or refrigerator is not cool after being on at least two hours - a hard reset may be required.
See "Troubleshooting" for hard reset instructions. The hard reset process involves removing shore
power, battery power and solar power.
Troubleshooting
Reset By Disconnecting Power (Hard Reset
For additional information, see also QR-182 - 12V Refrigerator Hard Reset Procedure: https://Ici-support-doc.
s3.amazonaws.com/qr/ccd-0008369.pdf
1. Remove the unit from shore power (120V AC).
2. Disconnect all battery negative terminals and then remove all battery positive terminals.
NOTE: Using a battery disconnect in place of disconnecting the battery's negative terminal is not sufficient
for disconnecting the battery because the refrigerator may be directly connected to the battery.
3. If equipped, disconnect any solar systems to the unit (12V DC).
4. Check for quick disconnects.
5. Make sure all lights are off inside the appliance.
6. Confirm power has been removed by opening and closing the door to make sure all lights are off.
7. — If applicable, also confirm the control panel display is unresponsive.
8. Wait five to 10 minutes.
9. Restore power.
Customer Service Contact
If the issue does not seem resolved, contact Lippert Care Center directly by calling 432-LIPPERT (432-547-
7378) or email [email protected].
Asa supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are
our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at [email protected].
Self-help tips, technical documents, product videos and a training class schedule are available at lippert.com or by downloading the LippertNOW app.