ICC/ADAS 2 Control Module Recovery

Do not disconnect the VI or shut down CONSULT if reprogramming does not
complete.

If reprogramming does not complete and the “!?” icon displays, as shown in
Figure 16:


Check battery voltage
(12.0 - 13.5 V).



Ignition is ON, engine OFF.



External Bluetooth® devices are
OFF.



All electrical loads are OFF.



Select Retry and follow the on
screen instructions.



Retry may not go through on first
attempt and can be selected more
than once.

EXAMPLE

Figure 16

If reprogramming does not complete and the “X” icon displays, as shown in
Figure 17:


Check battery voltage
(12.0 - 13.5 V).



CONSULT A/C adapter is plugged
in.



Ignition is ON, engine OFF.



Transmission is in Park.



All CONSULT VI cables are
securely connected.



All C-III plus updates are installed.



Select Home, and restart the
reprogram procedure from the
beginning.

EXAMPLE

Figure 17

13/23

ITB24-010

25.

Perform Erase All DTCs.
a. Follow the on-screen instructions as shown in Figure 18 and Figure 19.

Figure 18

b. Select Next.

Figure 19
14/23

ITB24-010

HINT: When the entire reprogramming process is complete, the screen in Figure 20 will
display.
26.

Verify the before and after part numbers are different.

27.

Print a copy of the screen below (Figure 20) and attach it to the repair order for
warranty documentation.
HINT: If you cannot print the screen:
a. Select Screen Capture.
b. Name the file.
c. Save the file in My Documents.
 A copy of the screen is now saved in the CONSULT PC. It can be retrieved
and printed at a later time.

28.

Select Confirm.

XXXXXXXXXX
XXXXXXXXXX

xxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxx
ICC/ADAS 2

xxxxxxxxxxxxxxxxxx

Figure 20

29.

Select Home (screen not shown).

15/23

ITB24-010

30.

Select Re/programming, Configuration.

Figure 21

31.

Check the box to confirm the precaution instructions have been read, and then select
Next.
HINT: Use the arrows (if needed) to view and read all precautions.

Figure 22
16/23

ITB24-010

32.

Select Automatic Selection(VIN).

Example

Figure 23

33.

Confirm the VIN or Chassis # is correct, and then select Confirm.

XXXXXXXXXXXXXXX
QX50

Figure 24

17/23

ITB24-010

34.

Confirm the VIN is correct for the vehicle, and then select Confirm.

XXXXXXXXXXXXXXXXX

Figure 25

35.

Select ICC/ADAS 2.

Figure 26

18/23

ITB24-010

36.

Select After ECU Replacement under VEHICLE CONFIGURATION.

Figure 27

37.

Select Manual selection.

Figure 28

19/23

ITB24-010

38.

Select the applicable Type ID, and then select Next.


Refer to the EPC to determine the current Type ID for your VIN.

ICC/ADAS 2

284P4 - XXXXX
284P4 - XXXXX
284P4 - XXXXX
284P4 - XXXXX
284P4 - XXXXX

Figure 29

39.

Select OK.

ICC/ADAS 2

284P4 - XXXXX

Figure 30

20/23

ITB24-010

40.

Select End.

ICC/ADAS 2

284P4 - XXXXX

Figure 31

41.

Select Home (screen not shown).

42.

Select Diagnosis (All Systems).

Figure 32
21/23

ITB24-010

43.

Select ERASE.

Figure 33

22/23

ITB24-010

CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION

PFP

OP CODE

SYM

DIA

FRT

Perform Software Check ICC/ADAS 2

(1)

RXF2AA

ZE

32

0.3

(1)

Refer to the electronic parts catalog and use the Warning Speaker Controller ASSY
(284P1-*****) part number as the Primary Failed Part (PFP).

OR
DESCRIPTION
Perform Software Check & Update
ICC/ASAD2
(1)

PFP

OP CODE

SYM

DIA

FRT

(1)

RXF3AA

ZE

32

1.0

Refer to the electronic parts catalog and use the Warning Speaker Controller ASSY
(284P1-*****) part number as the Primary Failed Part (PFP).

HINT: FRT allows adequate time to access DTC codes. No other diagnostic procedures
subsequently required. Do NOT claim any Diagnostic Op Codes with this claim.

AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
July 19, 2024

ITB24-010

DESCRIPTION
Original bulletin published

23/23

ITB24-010