429

Owners Manual

NOTE: For one-touch access to seat heaters and defrosters, you can add these controls to My Apps. See Customizing My
Apps on page 19.
1. Touch to turn the climate control system on or off.
2. Touch Auto to turn the Auto setting on or off.
3. Touch the driver's side seat icon to adjust seat heaters for the driver. The seat operates at three levels from 3 (highest) to 1
(lowest). For one-touch access to seat heaters, you can add them to the touchscreen's bottom bar (see Customizing My
Apps on page 19).
4. Touch to turn on the wiper defrosters (if equipped). Wipers defrost for 15 minutes then turn off automatically.
5. Touch to turn the heater on or off for the steering wheel (if equipped).
6. Touch to adjust the climate settings for the rear cabin. If set to Auto, the rear vents turn on automatically when the front
climate system is on and a passenger is detected.
7. When in Park, these settings display to allow you to keep the climate control system operating, even when you leave
CybertruckModel SModel X (see Keep Climate On, Dog, and Camp on page 432).
8. Touch to turn all seat heaters off.
9. Touch to adjust seat heaters for front and rear seats.
10. Touch the passenger's side seat icon to adjust seat heaters for the front passenger. The seat operates at three levels from 3
(highest) to 1 (lowest). For one-touch access to seat heaters, you can add them to the touchscreen's bottom bar (see
Customizing My Apps on page 19).

430

Owner's Manual

Owners Manual
11. If your CybertruckModel SModel X is equipped with the medical-grade HEPA (High Efficiency Particulate Air) filter, this
filter ensures the best quality air inside the cabin whenever the climate control system is on and outside air is entering the
cabin (recirculate is off). The HEPA filter is extremely effective at removing particles, including pollution, allergens,
bacteria, pollen, mold spores, and viruses. Both the HEPA filter and the secondary filtration system also contain activated
carbon to remove a broad spectrum of odors and gases. When you engage Bioweapon Defense Mode, the positive
pressure inside the cabin minimizes the amount of outside air that can enter the vehicle.
NOTE: Some gases, such as carbon monoxide, are not effectively removed by activated carbon.
12. When CybertruckModel SModel X is in Park, touch Schedule to set a recurring daily time when you want
CybertruckModel SModel X to be ready to drive by preconditioning the Battery and cabin climate and/or charging during
off-peak hours (see Scheduled Precondition and Charge on page 478).
13. The windshield defroster distributes air flow to the windshield. Touch once to defog the windshield (the icon turns blue).
Touch a second time to defrost the windshield. Touch a third time to turn off and restore the air distribution, heating, and
fan to their previous settings.
14. Touch to control the flow of air inside the cabin. Air can be drawn into CybertruckModel SModel X from outside or air can
be recirculated inside the cabin.
15. Use the slider to adjust the fan speed.
NOTE: Adjusting the fan speed may change the selected setting for how air is drawn into CybertruckModel SModel X in
order to increase or reduce air flow.
16. Touch to turn the air conditioning system on or off. Turning it off reduces cooling, but saves energy.
NOTE: Because CybertruckModel SModel X runs much quieter than a gasoline-powered vehicle, you may notice the sound
of the air conditioning compressor as it is operating. To minimize noise, reduce the fan speed.
17. Choose where air flows into the front cabin (windshield, face-level, or foot-level vents). You can choose one or more vents.

Owner's Manual

431

Owners Manual
Climate Popup
Touch the temperature arrows on the bottom of the touchscreen to display a popup for easy access to some of the most
common climate controls:

NOTE: For one-touch access to seat heaters and defrosters, you can add these controls to My Apps. See Customizing My
Apps on page 19.
1. Touch to access the main climate controls screen.
2. Enable or disable heated or cooled seats (if equipped).
3. Enable or disable the front or rear windshield defrosters.
4. Modify the cabin temperature by dragging the slider. You can also enable temperature splitting which allows the driver and
front passenger to customize their own climate preferences. The front passenger can touch the temperature icon on the
bottom of the touchscreen or the main climate controls screen to adjust. Touch Split again to disable climate splitting.
Keep Climate On, Dog, and Camp
The Keep Climate On, Dog, and Camp settings allow you to keep the climate control system running when in Park, even after
you've left CybertruckModel SModel X or choose to stay inside the vehicle. These settings are useful when it is important to
maintain the cabin temperature in hot or cold weather conditions. For example, when leaving groceries in
CybertruckModel SModel X on hot days, you may want to use Keep Climate On to prevent spoilage.
Dog is designed to maintain a comfortable cabin temperature for your pet while you actively and frequently monitor this
temperature using the mobile app (which requires both your phone and the vehicle to have cellular connectivity). When in Dog,
the touchscreen displays the current cabin temperature to inform people passing by that your pet is safe. This setting is not
intended for people, and should only be used for short periods of time while you stay in close proximity should you need to
return to the vehicle in situations where the temperature can no longer be maintained.
NOTE: To avoid accidentally pressing the window switch (such as your dog stepping on it), the windows cannot be rolled down
while Dog is enabled.
NOTE: If Dog and Sentry are enabled at the same time, Sentry defaults to Disable Sentry Sounds to protect your pet. See
Sentry Mode on page 422 for more information.
Live Camera view is now available if Sentry Mode or Dog Mode, or both, are enabled. When Sentry Mode is on, the cameras
show a live view of the vehicle's surroundings. When Dog Mode is on, the interior cabin camera shows the inside of the vehicle
so you can check on your pet at any time. If both are enabled, switch the camera views by touching the gray circles or the
interior icon that correspond to different cameras on the mobile app. See Sentry Mode on page 422 for more information.
NOTE: Enabling the interior cabin camera for Dog or Sentry Mode requires the mobile app version 4.15.0 or higher. This feature
is not supported in vehicles with Autopilot computer 2.0 or 2.5. Touch Controls > Software > Autopilot computer to find out
which computer your vehicle has.
NOTE: View Live Camera is limited to approximately one hour (or 15 minutes for some regions) of cumulative usage per day.

432

Owner's Manual

Owners Manual
Camp allows you to power electronics through the USB ports and low voltage outlet in addition to maintaining the cabin
temperature. The touchscreen remains on so you can play music, browse the internet, play games in the arcade, or watch
shows in Tesla Theater. You can also control media and climate settings from a paired phone. Camp is ideal for remaining
inside your vehicle, such as camping or staying with a child. While active, Sentry Mode and the vehicle alarm system are
disabled. Walk-Away Door Lock is inactive.
To operate Keep Climate On, Dog, or Camp:
1. Make sure the Battery's charge level is at least 20%.
2. Engage Park. The Keep Climate On, Dog, and Camp settings are available only when CybertruckModel SModel X is in Park.
3. If necessary, adjust the climate settings.
4. On the climate controls screen, touch Keep Climate On, Dog, or Camp.
NOTE: You can also control Dog and Camp from the mobile app, by swiping up from the gray bar on the Climate screen.
The climate control system attempts to maintain your climate settings until you shift out of Park or manually turn it off. Avoid
using Keep Climate On, Dog, or Camp when the Battery's charge level is low.
Dog cannot be enabled if the cabin temperature is too hot, or if the vehicle detects an issue with the climate control system.
Ensure that the cabin temperature is at a safe and comfortable level before enabling Dog.
If Keep Climate On, Dog, or Camp are on, the Tesla mobile app attempts to repeatedly send notifications reminding you to
check on anything that you have left in CybertruckModel SModel X if:
• The Battery's charge level drops below 20%.
• The vehicle detects an issue with the climate control system.
• If the cabin temperature drifts significantly from the level set for dog.
If Keep Climate On, Dog, or Camp are on, the Tesla mobile app attempts to repeatedly send notifications reminding you to
check on anything that you have left in CybertruckModel SModel X if the Battery's charge level drops below 20%.
NOTE: Software updates cannot be performed when Keep Climate On, Dog, or Camp is active.
NOTE: The intrusion sensor (if equipped) automatically disables when Keep Climate On, Dog, or Camp is active. However, you
can override this behavior and keep the intrusion sensor enabled. To do so, touch Controls > Safety > Tilt/Intrusion after
enabling Keep Climate On, Dog, or Camp. However, note that keeping the intrusion sensor enabled while Keep Climate On,
Dog, or Camp is active can trigger an alarm event as a result of air movement inside the cabin.
WARNING: Never leave a child unattended in your vehicle.
WARNING: Check local laws for any restrictions on leaving pets unattended in your vehicle.
WARNING: You are responsible for the safety of your dog or pet. Never leave them in CybertruckModel SModel X for
long periods of time. Constantly monitor the vehicle temperature and their well-being. Make sure you have sufficient
cellular coverage on your phone and time to return to the vehicle, if necessary.
WARNING: In the unlikely event that your climate control system needs service or is not working as expected, avoid
using Keep Climate On, Dog, and Camp. Never rely on your vehicle to protect something irreplaceable.
WARNING: You can adjust and monitor the climate control system remotely using the mobile app. However, if you use
the mobile app to turn off the climate control system, Keep Climate On, Dog, and Camp stop operating.
Cabin Overheat Protection
Cabin Overheat Protection prevents the cabin from getting too hot in scorching ambient conditions. While not necessary to
activate whenever you leave CybertruckModel SModel X, the climate control system can reduce and maintain the temperature
of your vehicle’s cabin. This can prevent the cabin from getting too hot after leaving it parked in the sun, making the vehicle
more comfortable when you return. Cabin Overheat Protection may take up to 15 minutes to enable once you exit the vehicle.
This feature is intended for passenger comfort and has no impact on the reliability of your vehicle's components.
To turn on, touch Controls > Safety > Cabin Overheat Protection and choose:

Owner's Manual

433

Owners Manual
• On: The air conditioning operates when the cabin temperature exceeds 105° F (40° C), or the selected temperature if
available, on the touchscreen or mobile app. Customizing temperatures may require the most recent version of the mobile
app.
• Off: Disables Cabin Overheat Protection.
You can also enable Cabin Overheat Protection remotely through the mobile app by touching Climate. Swipe up on the bottom
menu and select a setting under Cabin Overheat Protection (see Mobile App on page 211).
Cabin Overheat Protection operates until 12 hours has elapsed once you exit CybertruckModel SModel X, or until the Battery
energy drops below 20%, whichever comes first. Using Cabin Overheat Protection requires energy from the Battery, which
may decrease range.
NOTE: To enable Cabin Overheat Protection, Tilt/Intrusion must be turned off.
WARNING: Due to automatic shut-off, extreme outside conditions, or other potential inability to maintain the selected
temperature, the inside of the vehicle can become dangerously hot, even when Cabin Overheat Protection is enabled. If
you experience temperatures exceeding the selected temperature repeatedly, contact Tesla service.
WARNING: Never leave children or pets in the vehicle unattended. Due to automatic shut-off or extreme outside
conditions, the inside of the vehicle can become dangerously hot, even when Cabin Overheat Protection is enabled.
Climate Control Operating Tips
• When you use the mobile app to turn on the climate control system, it automatically turns off when the charge level drops
to 20%, or if two hours has passed. To cool or heat the cabin for a longer period of time, charge the vehicle and re-enable
your climate control preference through the mobile app.
• You may hear the sound of the climate system inside the cabin of CybertruckModel SModel X when Parked. It makes a low
fan noise. The climate system attempts to dry itself out to minimize additional moisture or musty odors. This is a normal
operation and not a cause for concern.
• You can improve the efficiency of the cabin heating by reducing your selected acceleration mode (see Acceleration Modes
on page 294). This allows the heat pump system to take more heat from the Battery to efficiently heat the cabin, instead of
maintaining the Battery's ability to provide peak acceleration performance. This helps to maximize driving efficiency in
colder weather. Note that when subsequently increasing the acceleration mode, the Battery requires time to warm up
before the increased level of acceleration is available.
• To conserve energy, turn on Range Mode to limit the power of the climate control system (touch Controls > Pedals &
Steering > Range Mode). Cabin heating and cooling may be less effective, but you can use seat heaters to provide warmth
in colder climates.
• If the climate control system is louder than you prefer, manually reduce the fan speed.
• In addition to cooling the interior, the air conditioning compressor also cools the Battery. Therefore, in hot weather, the air
conditioning compressor can turn on even if you turned it off. This is normal because the system’s priority is to cool the
Battery to ensure it stays within an optimum temperature range to support longevity and optimum performance.
• Even when not in use, you may hear CybertruckModel SModel X emit a whining noise or the sound of water circulating.
These sounds are normal and occur when the internal cooling systems turn on to support various vehicle functions, such as
maintaining the low voltage battery and balancing the temperature of the high voltage Battery.
• To ensure the climate control system operates efficiently, close all windows and ensure that the exterior grille in front of the
windshield is free of ice, snow, leaves, and other debris.
• In very humid conditions, it is normal for the windshield to fog slightly when you first turn on the air conditioning.
• It is normal for a small pool of water to form under CybertruckModel SModel X when parked. Extra water produced by the
dehumidifying process is drained underneath.
• To reduce the temperature in the cabin in hot weather conditions, the fan may turn on to vent the cabin when the vehicle is
parked. This occurs only if the battery's charge level is above 20%.

434

Owner's Manual

Owners Manual
Vents
Outside air is drawn into CybertruckModel SModel X through the grill in front of the windshield. Keep the grill clear of
obstructions such as leaves and snow.
To direct the flow of air inside CybertruckModel SModel X, move the interior vents up, down, or from side to side.

NOTE: You can direct the outer face level vents toward the side windows to help defrost or defog them.
Cabin Air Filter(s)
CybertruckModel SModel X has one or more air filters to prevent pollen, industrial fallout, road dust and other particles from
entering through the vents.
NOTE: Cabin air filter(s) require periodic replacement. See Service Intervals on page 485.

Owner's Manual

435

Owners Manual
Adjusting the Front and Rear Vents
CybertruckModel SModel X has a unique horizontal face-level vent that spans the width of the dashboard. It also has vents at
the top and bottom of the rear console.

436

Owner's Manual

Owners Manual

1. Driver vents
2. Driver controls
3. Passenger controls
4. Passenger vents
5. Rear vents
6. Rear controls

Owner's Manual

437

Owners Manual
Using the touchscreens, you can pinpoint exactly where you want to direct the air flowing from this vent when heating or
cooling the cabin. When the face-level vent is on you can adjust the direction of the air flow from each vent. To adjust the
direction of the air flow, touch and drag the radiating air waves from the corresponding vent on the touchscreen. The air flows
in a single stream when centered or splits into mirrored air streams when air is directed outward or inward from the center of
the vent.
NOTE: When you split a vent into two separate air flows, the air flow in each direction is not as strong as when all air is flowing
in a single direction.
NOTE: Outside air is drawn into CybertruckModel SModel X through the grill in front of the windshield. Keep the grill clear of
obstructions, such as leaves and snow.
Cabin Air Filter(s)
CybertruckModel SModel X has one or more air filters to prevent pollen, industrial fallout, road dust and other particles from
entering through the vents.
NOTE: Cabin air filter(s) require periodic replacement. See Service Intervals on page 485.

438

Owner's Manual

Owners Manual
Cold Weather Best Practices
To ensure that CybertruckModel SModel X provides you with the best ownership experience possible in harsh cold weather
conditions, follow these best practices.
Before Driving
When snow and ice accumulate on your vehicle, moving parts, such as the door handlesdoors, windows, mirrors, and wipers
the wiper can freeze in place. To achieve maximum range and performance, it is helpful to warm the cabin and Battery before
driving. There are several ways to do so:
• Touch Controls > Schedule (also available on both the charging and climate control screens) to set a time when you want
your vehicle to be ready to drive (see Scheduled Precondition and Charge on page 478).
• In the mobile app, navigate to Climate to customize the temperature at which you want to heat the cabin. This also warms
the high voltage Battery as needed.
• In the mobile app, navigate to Climate > Defrost Car > Defrost to melt snow, ice, and frost on the windshield, charge port,
windows, and mirrors. This also warms the high voltage Battery as needed.
NOTE: Tesla recommends activating climate settings at least 30-45 minutes before departure (see Operating Climate
Controls on page 427Operating Climate Controls on page 957). Preconditioning times depend on outside temperature and
other factors. The mobile app will notify you once your vehicle has reached the desired preconditioning temperature.
Charge Port

If your charge port latch freezes in place and a charging cable becomes stuck in the charge port, try manually releasing the
charge cable. See Manually Releasing Charge Cable on page 474Manually Releasing Charge Cable on page 475Manually
Releasing Charge Cable on page 474Manually Releasing Charge Cable on page 991.
In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. In cases where you
cannot remove or insert the charge cable, or the vehicle is not Supercharging due to the latch being frozen in place, use the
Defrost Car setting in the mobile app. This can help thaw ice on the charge port latch so the charge cable can be removed or
inserted.
You can also prevent the occurrence of a charge port latch freezing in place by using the Schedule settings (see Scheduled
Precondition and Charge on page 478).
NOTE: If your charge port latch is frozen in place, it may not lock the charging cable in place when inserted, but it can still
charge at a slow AC rate even if the latch is not engaged.
Charging

By using Trip Planner (if available) to navigate to a Tesla charging location, CybertruckModel SModel X pre-heats the high
voltage Battery to ensure when you arrive at the charger, the temperature of the Battery is optimal and ready to charge. This
reduces the amount of time it takes to charge. See (see Trip Planner on page 450).
NOTE: Tesla recommends using Trip Planner to navigate to a charging location for at least 30-45 minutes before arrival to
ensure optimal Battery temperature and charging conditions. If the drive to the charging location is less than 30-45 minutes,
consider preconditioning the Battery before driving (see Before Driving on page 439).
NOTE: The thermal system may produce steam under certain conditions for vehicles equipped with a heat pump (to determine
if your vehicle has a heat pump, touch Controls > Software > Additional Vehicle Information). For example, odorless steam can
come from the front of your vehicle while charging at a Supercharger in cold temperature. This is normal and not a cause for
concern.
Windows

In the mobile app, go to Climate and select Defrost CarDefrost Truck, which helps melt snow, ice, and frost on the windshield,
windows, and mirrors.
In cold temperatures, CybertruckModel SModel X automatically makes a slight adjustment to the position of the windows to
make it easier to open doors.

Owner's Manual

439

Owners Manual
NOTE: Always connect to an external, low voltage power supply before opening a door when the vehicle has no power to avoid
breaking a window.
Use the mobile app to schedule a service appointment for Tesla to provide hydrophobic coating to the side and rear windows
(not the front windshield) for a nominal fee.
Mirrors

If ice buildup is expected when parking, turn off Auto-Fold Mirrors. Touch Controls > Vehicle > Auto-Fold. Ice can prevent
exterior side mirrors from folding or unfolding.
NOTE: Side mirrors automatically heat as needed during preconditioning, or when the rear defroster is turned on.
Wipers

If you expect snow or ice to build up when parked, touch Controls > Service > Wiper Service Mode. This raises the wipers
against the windshield so they can defrost when the windshield defrosts (see Wipers and Washers on page 257). You can also
turn on wiper defrosters (if equipped). See Operating Climate Controls on page 427.
Tires and Tire Chains

Use winter tires to increase traction in snowy or icy conditions. You can purchase winter tires on the Tesla Shop (see Seasonal
Tire Types on page 498) (see Seasonal Tire Types on page 1017).
Tire chains provide additional traction when driving in snowy or icy conditions. Check local regulations to determine if tire
chains are recommended or required during winter months. See Using Tire Chains on page 499Tire Chains on page 1018 for
more information.
Your vehicle’s tire pressures will drop in cold ambient temperatures. If the TPMS indicator light appears, inflate the tires before
driving. The tires will lose one PSI for every 10° F (6° C) drop in outside temperature (see Tire Care and Maintenance on page
489Inspecting and Maintaining Tires on page 1016). Proper tire pressures help protect tires from potholes and improve range
when properly inflated.
While Driving
Cold weather can increase energy consumption because more power is required for driving, cabin and Battery heating. Follow
these suggestions to reduce energy consumption:
• Use seat heaters to keep warm. Seat heaters use less energy than the cabin heater. Lowering the cabin temperature and
using seat heaters reduces energy consumption (see Operating Climate Controls on page 427Operating Climate Controls
on page 957).
• Slow down your driving and avoid frequent and rapid acceleration.
• Turn on Range Mode to automatically limit the power that the climate control system uses to maintain the temperature of
the Battery and the cabin area. Range Mode also turns off signature lights (if equipped) and adjusts the front and rear
motor torque split to maximize range (see Getting Maximum Range on page 480).
• You can improve the efficiency of the cabin heating by reducing your selected acceleration mode (see Acceleration Modes
on page 294). This allows the heat pump system to take more heat from the Battery to efficiently heat the cabin, instead of
maintaining the Battery's ability to provide peak acceleration performance. This helps to maximize driving efficiency in
colder weather. Note that when subsequently increasing the acceleration mode, the Battery requires time to warm up
before the increased level of acceleration is available.
Regenerative Braking

Regenerative braking can be limited if the Battery is too cold. As you continue to drive, the Battery warms up and regenerative
power increases (see Regenerative Braking on page 262Regenerative Braking on page 866).
NOTE: Limited regenerative braking can be avoided if you allow enough time to precondition your vehicle or if you use
Schedule to precondition CybertruckModel SModel X before your departure time (see Scheduled Precondition and Charge on
page 478).
NOTE: Installing winter tires can result in temporarily reduced regenerative braking power but after a short period of driving,
CybertruckModel SModel X recalibrates to correct this. Touch Service > Wheel & Tire > Tires to select winter tires and quicken
this process.

440

Owner's Manual

Owners Manual
Cold Battery

A blue snowflake icon appears on your instrument paneltouchscreen when some of the stored energy in the Battery is
unavailable because the Battery is cold. This portion of unavailable energy displays in blue on the Battery meter.
Regenerative braking, acceleration, and charging rates may be limited. The snowflake icon no longer displays when
the Battery is sufficiently warm.
After Driving
Leave CybertruckModel SModel X plugged in when not in use. This uses the charging system, rather than the Battery itself, to
keep the Battery warm (see High Voltage Battery Information on page 463).
Scheduled Precondition

When parked, use the Controls > Schedule settings, available on both the charging and climate control screens, to set a time
when you want to precondition CybertruckModel SModel X (see Scheduled Precondition and Charge on page 478). You can
also use Schedule to prevent the charge port latch freezing in place. Your vehicle determines the appropriate time to begin
preconditioning so that cabin and Battery are warm by your planned departure time.
Tesla recommends that you also schedule a charge with your precondition to ensure that your vehicle has sufficient energy for
the trip. When CybertruckModel SModel X is not plugged in, preconditioning operates but only when the Battery's charge
level is above 20%.
Storage
If you leave CybertruckModel SModel X parked for an extended period of time, plug the vehicle into a charger to prevent
normal range loss and to keep the Battery at an optimal temperature. Your vehicle is safe to stay plugged in for any length of
time.
When not in use, CybertruckModel SModel X enters a sleep mode to conserve energy. Reduce the number of times you check
your vehicle’s status on the mobile app, as this automatically wakes up your vehicle and starts normal energy consumption.

Owner's Manual

441

Owners Manual
Hot Weather Best Practices
To ensure that CybertruckModel SModel X provides you with the best ownership experience possible in hot ambient
conditions, follow these best practices.
Before Driving
There are several ways to prepare your vehicle for a drive, without having to get into an already hot vehicle:
• Precondition the cabin by moving the direction of air flow from the vents, and turn the seat heaters on or off. In the mobile
app, navigate to Climate to customize the temperature at which you want to cool the cabin.
• Touch Schedule, available on both the Charging and Climate Control screens, to set a time when you want your vehicle to
be ready to drive (see Scheduled Precondition and Charge on page 478).
• Enable Cabin Overheat Protection, which prevents the cabin from getting too warm in hot ambient conditions.
• In the mobile app, navigate to Controls to vent the windows.
NOTE: Tesla recommends activating climate settings at least 30-45 minutes before departure (see Operating Climate Controls
on page 427Operating Climate Controls on page 957). Preconditioning times depend on outside temperature and other
factors. The mobile app will notify you once your vehicle has reached the desired preconditioning temperature.
After Driving
Leave CybertruckModel SModel X plugged in when not in use, especially if using Preconditioning or Cabin Overheat
Protection. This uses the charging system, rather than the battery itself, to maintain a comfortable temperature (see High
Voltage Battery Information on page 463). In addition, there are several ways to minimize a hot cabin:
• Before leaving your vehicle (to run errands, for example), use Dog Mode to keep the cabin cool for pets or perishable
goods. See Keep Climate On, Dog, and Camp on page 432Keep Climate On, Dog, and Camp on page 959 for more
information.
• Tesla recommends turning the air conditioning off approximately 30 seconds before pressing Park to reduce puddling
below the vehicle.
• Park in the shade to help reduce power consumption and maintain cooler cabin temperatures.
• Use a sun shade (available on the Tesla Shop) if you have to park outside in the sun.
• When parked, plug in CybertruckModel SModel X and Schedule your charging. Your vehicle determines the appropriate
time to begin charging so it is complete during off-peak hours. The cabin and Battery are also prepared by your set
departure time. For more information, see Scheduled Precondition and Charge on page 478.
Charging
When using Trip Planner or navigating to a Supercharger station, your vehicle automatically prepares the Battery for most
efficient charging. In extreme heat, you may not see the message that the vehicle is preconditioning the Battery while
navigating to a Supercharger, but it is still preparing the Battery for charging.
NOTE: Tesla recommends using Trip Planner to navigate to a charging location for at least 30-45 minutes before arrival to
ensure optimal Battery temperature and charging conditions. If the drive to the charging location is less than 30-45 minutes,
consider preconditioning the Battery before driving (see Before Driving on page 439).
If possible, leave your vehicle plugged into a charger whenever not in use, even in warm weather, especially if using
Preconditioning or Cabin Overheat Protection.
Storage
If you leave CybertruckModel SModel X parked for an extended period of time, plug the vehicle into a charger to prevent
normal range loss and to keep the Battery at an optimal temperature. Your vehicle is safe to stay plugged in for any length of
time.
When not in use, CybertruckModel SModel X enters a sleep mode to conserve energy. Reduce the number of times you check
your vehicle’s status on the mobile app, as this automatically wakes up your vehicle and starts normal energy consumption.

442

Owner's Manual

Owners Manual
Navigation and Entertainment
Maps and Navigation
Map Overview
The touchscreen displays a map at all times (except when CybertruckModel SModel X is shifted into Reverse).
Use your finger(s) to interact with the map:
• To move the map in any direction, hold and drag a finger.
• To rotate the map in any direction, hold and turn two fingers.
• To zoom the map in or out, expand or pinch two fingers, respectively.
NOTE: When you rotate or move the map, your current location is no longer tracked. The message "Tracking Disabled" displays
briefly next to the map orientation icon and the icon turns gray. To re-enable tracking, touch the map's orientation icon and
choose North Up or Heading Up.
NOTE: The map zooms in and out automatically when a navigation route is active.
To change the orientation of the map, toggle between these options:
North Up: North is always at the top of the screen.

Heading Up: The direction you are driving is always at the top of the screen. The map rotates as you change
direction. This icon has an integrated compass that indicates the direction you are driving.
NOTE: Touching this icon while navigating to a destination displays the route overview.

Route overview is available when you are navigating to a destination and displays when you expand the turnby-turn direction list (by swiping it downward). When you collapse the turn-by-turn direction list by swiping it
upward, the map displays your previously chosen orientation.

Map Display
When CybertruckModel SModel X is in Park, the following icons display on the map to allow you to customize the type of
information the map displays. To access these icons when driving, touch anywhere on the map (they disappear after a few
seconds).
Satellite imagery (if equipped with premium connectivity).

Traffic conditions (if equipped with premium connectivity).

Owner's Manual

443

Owners Manual
Map details (such as points of interest).

Drop a pin anywhere on the map by pressing and holding your finger on a desired location. When you drop a pin, or touch an
existing pin, the chosen location is centered on the map and a popup screen provides information about the location. From this
popup, you can navigate to the location add or remove the location from your list of favorite destinations (see Home, Work,
and Favorite Destinations on page 447).

Charging locations. Shows a popup list that includes the city and proximity of the corresponding stations on the
map. Charging locations include Tesla Superchargers, destination charging sites, third-party fast chargers, and
public chargers that you have used previously. See Charging Locations on page 447. Touch the lightning bolt
icons in the popup list to filter by the types of chargers based on max power.
NOTE: In some market regions, third-party fast chargers are also included on the map as dark gray pins when
you display chargers.
Navigation Settings
NOTE: The navigation settings available can vary depending on region and vehicle configuration.
The navigation settings icon displays when you touch ... once you start navigating to a destination.
NOTE: You can also access navigation settings by touching Controls > Navigation.

Touch the navigation settings icon to customize the navigation system to suit your preferences (the available settings vary
depending on your market region and vehicle configuration):
• Navigation Guidance: Touch Voice to enable an audible reading for navigation instructions.
• Touch - or + to increase or decrease the volume of spoken navigation instructions. Decreasing all the way to the left or
touching the speaker icon mutes the instructions. You can also mute/unmute navigation instructions by touching the
speaker icon. This volume setting applies only to the navigation system's spoken instructions. Volume for Media Player and
Phone does not change.
NOTE: Volume may automatically be adjusted based on driving speed and climate settings.
NOTE: Navigation instructions are muted when the paired phone has an ongoing phone call.
• Enable Automatic Navigation if you want CybertruckModel SModel X to automatically initiate a navigation destination when
you get in your vehicle. Destinations are predicted based on commonly driven routes, time of day, and calendar entries (see
Automatic Navigation on page 446).
• Enable Trip Planner (if available in your market region) to add Supercharger stops as needed. Supercharging stops are
added to navigation routes with the goal of minimizing the amount of time you spend driving and charging (see Trip Planner
on page 450).
• Enable Online Routing to automatically route to avoid heavy traffic and to get real-time traffic conditions along navigation
routes, if available in your region (see Online Routing on page 449).
• Touch Avoid Ferries to be automatically routed to avoid ferries.
• Touch Avoid Tolls to be automatically routed to avoid tolls, if possible.
• Touch Use HOV Lanes to include High Occupancy Vehicle (HOV) lanes on navigation routes. This is particularly useful when
using Navigate on Autopilot (see Navigate on Autopilot on page 359Navigate on Autopilot on page 331).

444

Owner's Manual

Owners Manual
Navigating to a Destination
To navigate to a location, touch the search bar in the corner of the map and enter a destination, send the destination from your
phone, or use voice commands (see Voice Commands on page 50) for an address, landmark, business, etc. If the destination
you choose has other destinations within it (such as terminals at an airport), you can also choose a sub-destination.
Touch the search bar for different options:
• Refresh a search when you zoom in or drag to a different area of the map by tapping Search this area when prompted (if
available in your region).
• Choose a saved Home or Work location (see Home, Work, and Favorite Destinations on page 447).
• Select a Charging destination (see Charging Locations on page 447).
• Pick from Recent destination (the most recent destination is listed at the top).
• Choose a destination you have marked as a Favorite (see Home, Work, and Favorite Destinations on page 447).
• A popular restaurant when you're feeling Hungry or a popular destination (such as museums and amusement parks) when
you're feeling Lucky (see Lucky and Hungry on page 446).
NOTE: You can start navigation remotely from your IOS® or Android™ device using the "share" functionality on your device
after allowing access to the Tesla mobile app.
When you specify a location, the touchscreen zooms out to provide an overview of the route you need to travel and displays a
turn-by-turn direction list. Estimated arrival time, driving time, and mileage displays at the bottom of the direction list. Note
the following about the turn-by-turn direction list:
• The Battery icon on the turn list provides a visual representation showing an estimate of how much energy will remain when
you reach your destination, and how much will remain if you make a round trip back to your current location. See Predicting
Energy Usage on page 448.
• If charging is needed to reach your destination and Trip Planner is enabled (and available in your market region), the
navigation route automatically includes Supercharger stops (see Trip Planner on page 450).
• If you won't have enough energy to reach your destination and there is no Supercharger on the route, an alert tells you that
charging is needed to reach your destination.
• Each turn is preceded by the distance to the maneuver.
• To see the bottom of the list, you may need to drag the list upward.
• Touch the top of the list to minimize it.
While navigating, the map tracks your location and displays the current leg of your trip. You can display the entire route at any
time by swiping down to expand the turn-by-turn direction list or touching the route overview icon.
Below the turn-by-turn list, a progress bar shows how close you are to your destination or next stop. If online routing is
enabled, the progress bar also shows live traffic conditions on your route (see Online Routing on page 449).
To stop navigating, touch Cancel, located in the bottom corner of the turn-by-turn direction list. Swipe right on the suggested
location or press and hold the location to quickly delete certain recent navigation searches.
NOTE: If a data connection is not available, onboard maps allow you to navigate to any destination, but you must enter the
exact and complete address.
If Navigate on Autopilot is enabled, you can turn it on for the navigation route by touching Navigate
on Autopilot in the turn-by-turn direction list (when the feature is active, the icon is blue).
Navigate on Autopilot automatically changes lanes and steers CybertruckModel SModel X on
controlled-access roads (like highways and freeways), along a navigation route. For details, see
Navigate on Autopilot on page 359Navigate on Autopilot on page 331.

Owner's Manual

445

Owners Manual
Selecting an Alternate Route

Depending on market region and vehicle configuration, this feature may not be available on your vehicle. Your vehicle must be
equipped with Premium Connectivity.
After you have entered a destination with one stop, the map displays up to three alternate routes. This allows you to easily
compare total travel time and traffic information for each route. If you do not select a preferred route within the timeout
period, the fastest route is automatically selected.
r
Adding Stops to a Route

After entering a destination, edit your route by adding, deleting or reordering stops. Touch the three dots at the bottom of the
turn-by-turn direction list to view options to edit your route.
Add Stop allows you to add a stop by searching for a location or adding a Home, Recent or Favorite destination.
You can also add a stop by touching any pin on the map and selecting Add from the popup.

Edit Stop allows you to set up a complex trip by adding or deleting stops on your route. Drag and drop stops by
touching the equal sign to reorder your trip.

You can also use the Tesla mobile app to edit your route (if available in your region). In the Tesla mobile app, go to Locations >
Navigate and enter a destination, touch Edit Trip > Add Stop to edit your route, then touch Send to Car to share the trip with
your vehicle.
NOTE: Requires Tesla mobile app version 4.27.5 or newer.
Automatic Navigation

NOTE: Automatic Navigation may not be available in all market regions and on all vehicle configurations.
Automatic Navigation can predict a destination when you get in your vehicle. When your phone's calendar is synced to
CybertruckModel SModel X, and the calendar includes an event that takes place within two hours of when you get in your
vehicle to drive, Automatic Navigation suggests the location of the event (assuming a valid address is associated with the
event).