2. If the issue persists, turn OFF the circuit breaker for the Wall Connector, wait 10 seconds, and turn the circuit breaker ON
again. Then try reconnecting the Wall Connector to the vehicle.
3. If the issue persists, have an electrician make sure all wires are properly connected and torqued according to the
instructions in the Wall Connector Installation Manual.
4. Once your electrician has completed all work and restored power to the Wall Connector, try charging again by
reconnecting the Wall Connector to the vehicle.
5. If the issue persists, the Wall Connector requires service.
For more information, see the installation guide for your Wall Connector.

Owner's Manual

1031

Owners Manual
CC_f028
Unable to charge - Incorrect switch setting
Wall Connector rotary switch must be adjusted
What this alert means:
Incorrect rotary switch setting.
What to do:
Have your electrician adjust the Wall Connector’s internal rotary switch to a valid operating current setting. They should first
make sure there is no power to the Wall Connector. The correlation between switch setting and current should be printed on
the inside of the Wall Connector. Your electrician should also refer to the Set the Operating Current section in the Wall
Connector Installation Manual.
If the Wall Connector is set up for load sharing (circuit breaker sharing) and paired with other Wall Connectors, the rotary
switch of the primary unit must be set to an operating current setting that allows each paired Wall Connector to receive at
least 6A of charge current.
Example: Three Wall Connectors are paired for load sharing. The primary unit needs to be set to a current of at least 3 * 6A =
18A or greater.
For more information, see the installation guide for your Wall Connector.
CC_f029
Unable to charge - Vehicle connection issue
Insert charge handle fully into charge port
What this alert means:
A communication error occurred between the Wall Connector and the vehicle.
What to do:
Try charging again by disconnecting the Wall Connector from the vehicle and reconnecting.
1. If the issue persists, turn OFF the circuit breaker servicing the Wall Connector, wait 10 seconds, turn the circuit breaker ON
again, then try reconnecting the Wall Connector to the vehicle.
2. If the issue persists and other charging equipment is available, plug the vehicle into another Wall Connector or a Mobile
Connector to determine if the vehicle is able to communicate with other charging equipment.
3. If the issue persists, service is required.
For more information, see the installation guide for your Wall Connector.
CC_f030
Unable to charge - Primary / paired unit mismatch
Wall Connector current ratings must match
What this alert means:
Load sharing (circuit breaker sharing) network: The paired Wall Connectors have different maximum current capabilities.
What to do:
Only Wall Connectors with the same maximum current capabilities can be paired in a load sharing (circuit breaker sharing)
network. Have your electrician inspect the type labels on the Wall Connectors and make sure the current capabilities match. It
is further recommended that your electrician only pair Wall Connectors with the same part number, as an easy way to make
sure paired units are compatible.
For more information, see the installation guide for your Wall Connector.

1032

Owner's Manual

Owners Manual
CC_f041
Charge rate reduced - Wall connection hot
Outlet or Wall Connector wiring must be checked
What this alert means:
High temperature detected by Wall Connector alerts indicate the building connection to the Wall Connector is getting too
warm, so charging has been slowed to protect the wiring and Wall Connector.
This is not typically an issue with your vehicle or your Wall Connector, but rather an issue with the building wiring. This may be
caused by a loose building wiring connection to the Wall Connector and can be fixed quickly by an electrician.
What to do:
Contact an electrician to inspect the building wiring connection to the Wall Connector. They should make sure that all wires
are properly connected and torqued according to the installation guide for the Wall Connector.
For more information, see the installation guide for your Wall Connector.
CHG_f035
Charging equipment communication error
Try again or try different equipment
What this alert means:
Your vehicle is unable to charge because it cannot communicate effectively with the external charging equipment. It cannot
sense a valid control pilot signal coming from the charging equipment.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:
First, confirm the lack of effective communication is caused by the external charging equipment rather than an issue with your
vehicle. This is usually the case.
Try charging the vehicle using different external charging equipment (including charge cable, charging station, or charging
stall).
• If the vehicle begins charging, the issue was likely with the equipment.
• If the vehicle still does not charge, the issue may be with the vehicle.
If the issue is suspected to be with the vehicle, inspect the charge port inlet and the charge cable connector for any
obstructions, such as debris, moisture, and/or foreign objects. Make sure any charge port inlet obstruction has been removed
and any moisture has been allowed to dry, then try re-inserting the cable into the charge port.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
For more information on charging, see Charging Instructions on page 731Charging Instructions on page 1393.
CHG_f083
Cannot charge - Poor grid power quality possible
Retry / Try other charge location or Supercharging
What this alert means:
Power has been lost during charging. This could result from the charging equipment losing power from the source (for
example, a wall outlet) or from an issue with the charging equipment.
What to do:
Owner's Manual

1033

Owners Manual
This alert is often accompanied by other alerts that can help you identify and troubleshoot the issue. Start by investigating any
other displayed alerts that relate to charging issues.
Alternatively, you can check Mobile Connector or Wall Connector status lights to confirm power to the device, and also refer
to the product owner’s manual for troubleshooting information based on blink codes. If using other (non-Tesla) external
charging equipment, check for a display or other user interface that provides troubleshooting help.
If there is clearly no power to the charging equipment, check the circuit breaker for the wall outlet / Wall Connector to make
sure it has not tripped.
Further troubleshooting tips based on equipment type:
• If using a Mobile Connector, try charging the vehicle with a different wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the original wall outlet.
◦ If the vehicle still does not charge, the issue may be with the Mobile Connector.
• If using a Wall Connector, try charging the vehicle with different charging equipment like a Mobile Connector powered by a
separate wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the Wall Connector.
If the issue is with the original wall outlet or the Wall Connector, contact an electrician to inspect the wiring connection.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_f091
Charging equipment not recognized
Try again or try different equipment
What this alert means:
The charge port is unable to detect whether a charge cable is inserted, or the type of charge cable connected.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:
If this alert appears while a charge cable is connected, determine whether the issue is caused by the charging equipment or
the vehicle. Try charging the vehicle using different external charging equipment (including charge cable, charging station, or
charging stall).
• If the vehicle begins charging, the issue was likely with the equipment.
• If the vehicle still does not charge, the issue may be with the vehicle.
If this alert appears while a charge cable is not connected or if the issue is suspected to be with the vehicle, inspect the charge
port inlet and the charge cable connector for any obstructions, such as debris, moisture, and/or foreign objects. Make sure
any charge port inlet obstruction has been removed and any moisture has been allowed to dry, then try re-inserting the cable
into the charge port.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
For more information on charging, see Charging Instructions on page 731Charging Instructions on page 1393.
1034

Owner's Manual

Owners Manual
CHGS_f083
Cannot charge - Poor grid power quality possible
Retry / Try other charge location or Supercharging
What this alert means:
Power has been lost during charging. This could result from the charging equipment losing power from the source (for
example, a wall outlet) or from an issue with the charging equipment.
What to do:
This alert is often accompanied by other alerts that can help you identify and troubleshoot the issue. Start by investigating any
other displayed alerts that relate to charging issues.
Alternatively, you can check Mobile Connector or Wall Connector status lights to confirm power to the device, and also refer
to the product owner’s manual for troubleshooting information based on blink codes. If using other (non-Tesla) external
charging equipment, check for a display or other user interface that provides troubleshooting help.
If there is clearly no power to the charging equipment, check the circuit breaker for the wall outlet / Wall Connector to make
sure it has not tripped.
Further troubleshooting tips based on equipment type:
• If using a Mobile Connector, try charging the vehicle with a different wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the original wall outlet.
◦ If the vehicle still does not charge, the issue may be with the Mobile Connector.
• If using a Wall Connector, try charging the vehicle with different charging equipment like a Mobile Connector powered by a
separate wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the Wall Connector.
If the issue is with the original wall outlet or the Wall Connector, contact an electrician to inspect the wiring connection.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_u001
Charge rate reduced - Unexpected voltage drop
Remove extension cords / Have wiring inspected
What this alert means:
Charging speed has been reduced because the onboard charger in your vehicle has detected a large voltage drop during
charging.
Likely causes of this issue include:
• Problems with the building wiring and/or the wall outlet.
• An extension cord or other wiring that cannot support the requested charge current.
This issue can also result from turning on electric devices that draw a lot of power from the same branch circuit while the
vehicle is charging.
What to do:
If this issue has occurred multiple times at your normal charging location, contact an electrician to inspect the electrical
installation. They should check the following:
Owner's Manual

1035

Owners Manual
• Any installed charging equipment and its connection to the building wiring.
• The building wiring, including any wall outlet used with a Mobile Connector.
• The electrical connection to the power utility line where it enters the building.
Discuss with the electrician whether the charge current on the vehicle should be lowered, or if the installation should be
upgraded to support a higher charge current.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_u002
Charging stopped due to large voltage drop
Remove extension cords / Have wiring inspected
What this alert means:
Charging has been interrupted because the onboard charger in your vehicle has detected an unusually large voltage drop.
Likely causes of this issue include:
• Problems with the building wiring and/or the wall outlet.
• An extension cord or other wiring that cannot support the requested charge current.
This issue can also result from turning on electric devices that draw a lot of power from the same branch circuit while the
vehicle is charging.
What to do:
If this issue has occurred multiple times at your normal charging location, contact an electrician to inspect the electrical
installation. They should check the following:
• Any installed charging equipment and its connection to the building wiring.
• The building wiring, including any wall outlet used with a Mobile Connector.
• The electrical connection to the power utility line where it enters the building.
Discuss with the electrician whether the charge current on the vehicle should be lowered, or if the installation should be
upgraded to support a higher charge current.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_u004
Charging stopped - Power lost while charging
Check power source and charging equipment
What this alert means:
Power has been lost during charging. This could result from the charging equipment losing power from the source (for
example, a wall outlet) or from an issue with the charging equipment.

1036

Owner's Manual

Owners Manual
What to do:
This alert is often accompanied by other alerts that can help you identify and troubleshoot the issue. Start by investigating any
other displayed alerts that relate to charging issues.
Alternatively, you can check Mobile Connector or Wall Connector status lights to confirm power to the device, and also refer
to the product owner’s manual for troubleshooting information based on blink codes. If using other (non-Tesla) external
charging equipment, check for a display or other user interface that provides troubleshooting help.
If there is clearly no power to the charging equipment, check the circuit breaker for the wall outlet / Wall Connector to make
sure it has not tripped.
Further troubleshooting tips based on equipment type:
• If using a Mobile Connector, try charging the vehicle with a different wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the original wall outlet.
◦ If the vehicle still does not charge, the issue may be with the Mobile Connector.
• If using a Wall Connector, try charging the vehicle with different charging equipment like a Mobile Connector powered by a
separate wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the Wall Connector.
If the issue is with the original wall outlet or the Wall Connector, contact an electrician to inspect the wiring connection.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_u005
Unable to charge - Charge station not powered
Check power source or try a different station
What this alert means:
Charging cannot begin because the charging equipment is not ready. A charge handle is detected, but the charging station is
not communicating with the vehicle. This issue could occur because:
• The charging station is not powered.
• The control pilot signal between the charging station and the vehicle is interrupted.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:
Try charging the vehicle with different charging equipment or at a different charging station.
• If the vehicle begins charging, the issue was likely with the equipment.
• If the vehicle still does not charge, the issue may be with the vehicle.
If using a Mobile Connector or Wall Connector, first check the status lights on the front. If no status lights are visible, check
the power source and contact an electrician to inspect the building wiring connection to the wall outlet or the Wall Connector
to confirm that all wires are properly connected and torqued.
If using other external charging equipment, consult the product's owner's manual to learn how to confirm that the station is
powered. Contact an electrician to inspect the building wiring and charging equipment as necessary.

Owner's Manual

1037

Owners Manual
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
CHG_u006
Charge port latch not engaged
Fully insert charge cable or check for obstruction
What this alert means:
The charge port latch is unable to latch the charge cable in the charge port inlet. If the latch is not engaged, AC charging (for
example, charging with a Mobile Connector or Wall Connector) will be limited to 16A and DC Fast Charging / Supercharging
will be unavailable.
The charge port light will pulse amber if this alert appears during AC charging and will be solid amber if this alert appears
when attempting to DC Fast Charge / Supercharge.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:
Try re-inserting the charge cable fully into the charge port inlet.
If your vehicle begins charging and the charge port light pulses green, the charge cable may not have been fully inserted
before. AC charging should no longer be limited, and DC Fast Charging / Supercharging should be available.
If charging is still limited or the vehicle will not charge at all, inspect the charge port inlet and the charge cable connector for
any obstructions, such as debris, moisture, and/or foreign objects. Make sure any charge port inlet obstruction has been
removed and any moisture has been allowed to dry, then try re-inserting the cable into the charge port.
If charging is still limited or the vehicle will not charge at all, make sure the charge port latch manual release cable (located on
the left-hand side in the trunk) has not been pulled. Make sure the handle (usually ring-shaped or a strap) for the manual
release cable is free of obstructions and that nothing is attached to it (like a cargo net or umbrella). make sure the charge port
manual release has not been actuated. For more information on using the charge port manual release, see Manually Releasing
Charge Cable on page 742Manually Releasing Charge Cable on page 745Manually Releasing Charge Cable on page 1398.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
For more information on charging, see Charging Instructions on page 731Charging Instructions on page 1393.
CHG_u007
Charging equipment reports error
Check equipment for error code or message
What this alert means:
Charging was interrupted because the external charging equipment has reported a fault that prevents the vehicle from
charging.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:
Inspect the external charging equipment and look for status lights, displays, or other status indicators on the equipment. For
more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's Manual
at Charging & Adapter Product Guides.

1038

Owner's Manual

Owners Manual
Try charging the vehicle with different charging equipment or at a different charging station.
• If the vehicle begins charging, the issue was likely with the equipment.
• If the vehicle still does not charge, the issue may be with the vehicle.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
CHG_u010
External charging equipment error detected
Try different charging equipment
What this alert means:
AC charging cannot begin due to a condition that prevents your vehicle from charging with AC power. DC fast charging /
Supercharging should still function as expected.
Your vehicle's onboard charger is detecting input voltage at the charge port when no power has been requested from the
external charging equipment, which indicates the external charging equipment is not functioning as expected.
This can sometimes be caused by a hardware issue specific to the external charging equipment, which prevents the charging
equipment from switching power to the vehicle on or off when requested. It could also occur due to another condition
affecting the external charging equipment, or a condition affecting your vehicle itself.
What to do:
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
Try charging with multiple, different types of charging equipment.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_u012
Power grid or vehicle issue limiting AC charging
Unplug and retry / Try different charging location
What this alert means:
Charging speed has been reduced due to a condition that affects your vehicle’s ability to charge with AC power. DC fast
charging / Supercharging should still function as expected.
This may be due to power supply disturbances caused by the external charging equipment or by the electrical power grid. In
some cases, this condition may be the result of using nearby electric devices that draw a lot of power.
If these possible causes can be ruled out, then a condition with your vehicle itself may also be affecting AC charging.
What to do:
If this alert is accompanied by another alert that specifies the condition affecting AC charging, start by investigating that alert.
Further troubleshooting tips based on equipment type:
• If using a Mobile Connector, try charging the vehicle with a different wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the original wall outlet.
◦ If the vehicle still does not charge, the issue may be with the Mobile Connector.
• If using a Wall Connector, try charging the vehicle with different charging equipment like a Mobile Connector powered by a
separate wall outlet.

Owner's Manual

1039

Owners Manual
◦ If the vehicle starts to charge, the issue was likely with the Wall Connector.
If the issue is with the original wall outlet or the Wall Connector, contact an electrician to inspect the wiring connection.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
If this alert persists when attempting to charge at multiple locations and with different charging equipment, it is recommended
that you schedule service.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_u013
Charging equipment communication lost
Check power source and charging equipment
What this alert means:
Charging stopped because communication between the vehicle and the external charging equipment was interrupted.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:
Confirm whether the external charging equipment is powered by looking for any status lights, displays, or other indicators on
the equipment. For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the
product's Owner's Manual at Charging & Adapter Product Guides.
If the equipment is not powered, try to restore the external charging equipment’s power source.
• If attempting to charge at a public station and power is unable to be restored, contact the station operator.
• If attempting to charge at a private station (for example: charging at home) and power is unable to be restored, contact an
electrician.
If the equipment is powered, try charging the vehicle using different external charging equipment.
• If the vehicle begins charging, the issue was likely with the equipment.
• If the vehicle still does not charge, the issue may be with the vehicle.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
CHG_u014
Charging equipment reports error
Check equipment for error code or message
What this alert means:
Charging was interrupted because the external charging equipment has reported a fault that prevents the vehicle from
charging.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:

1040

Owner's Manual

Owners Manual
Inspect the external charging equipment and look for status lights, displays, or other status indicators on the equipment. For
more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's Manual
at Charging & Adapter Product Guides.
Try charging the vehicle with different charging equipment or at a different charging station.
• If the vehicle begins charging, the issue was likely with the equipment.
• If the vehicle still does not charge, the issue may be with the vehicle.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
CHG_w032
Charge rate reduced - Wall connection hot
Outlet or Wall Connector wiring must be checked
What this alert means:
High temperature detected by Wall Connector alerts indicate the building connection to the Wall Connector is getting too
warm, so charging has been slowed to protect the wiring and Wall Connector.
This is not typically an issue with your vehicle or your Wall Connector, but rather an issue with the building wiring. This may be
caused by a loose building wiring connection to the Wall Connector and can be fixed quickly by an electrician.
What to do:
Contact an electrician to inspect the building wiring connection to the Wall Connector. They should make sure that all wires
are properly connected and torqued according to the installation guide for the Wall Connector.
Wall Connector installation guides can be found here.
CHG_w037
Unable to charge - Wall connection too hot
Outlet or Wall Connector wiring must be checked
What this alert means:
High temperature detected by Wall Connector alerts indicate the building connection to the Wall Connector is getting too
warm, so charging has been slowed to protect the wiring and Wall Connector.
This is not typically an issue with your vehicle or your Wall Connector, but rather an issue with the building wiring. This may be
caused by a loose building wiring connection to the Wall Connector and can be fixed quickly by an electrician.
What to do:
Contact an electrician to inspect the building wiring connection to the Wall Connector. They should make sure that all wires
are properly connected and torqued according to the installation guide for the Wall Connector.
For more information, see the installation guide for your Wall Connector.
CP_w043
Charge port door sensor fault
Charge port may not operate as expected
What this alert means:
One of the charge port door sensors is not functioning normally. When this occurs, the charge port may be unable to
accurately sense the charge port door position and the charge port may not operate as expected.
• The charge port latch may intermittently remain engaged when the charge port door is opened.
• The charge port light may illuminate only intermittently when the charge port door is opened.
What to do:

Owner's Manual

1041

Owners Manual
Try closing the charge port door and then opening it again.
For more information, see Opening the Charge Port on page 731Opening the Charge Port on page 1393.
For more information on charging, see Charging Instructions on page 731Charging Instructions on page 1393.
CP_w054
Charge port latch not engaged
Fully insert charge cable or check for obstruction
What this alert means:
The charge port latch is unable to latch the charge cable in the charge port inlet. If the latch is not engaged, AC charging (for
example, charging with a Mobile Connector or Wall Connector) will be limited to 16A and DC Fast Charging / Supercharging
will be unavailable.
The charge port light will pulse amber if this alert appears during AC charging and will be solid amber if this alert appears
when attempting to DC Fast Charge / Supercharge.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
What to do:
Try re-inserting the charge cable fully into the charge port inlet.
If your vehicle begins charging and the charge port light pulses green, the charge cable may not have been fully inserted
before. AC charging should no longer be limited, and DC Fast Charging / Supercharging should be available.
If charging is still limited or the vehicle will not charge at all, inspect the charge port inlet and the charge cable connector for
any obstructions, such as debris, moisture, and/or foreign objects. Make sure any charge port inlet obstruction has been
removed and any moisture has been allowed to dry, then try re-inserting the cable into the charge port.
If charging is still limited or the vehicle will not charge at all, make sure the charge port latch manual release cable (located on
the left-hand side in the trunk) has not been pulled. Make sure the handle (usually ring-shaped or a strap) for the manual
release cable is free of obstructions and that nothing is attached to it (like a cargo net or umbrella). make sure the charge port
manual release has not been actuated. For more information on using the charge port manual release, see Manually Releasing
Charge Cable on page 742Manually Releasing Charge Cable on page 745Manually Releasing Charge Cable on page 1398.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 705 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.
For more information on charging, see Charging Instructions on page 731Charging Instructions on page 1393.
DI_f138
Front motor disabled - OK to drive
Vehicle power may be limited
What this alert means:
Your vehicle's front motor is unavailable. Power, speed, and acceleration may be reduced as your vehicle uses the rear
motor(s) to continue driving.
What to do:
Continue to your destination.Your vehicle is OK to drive.
In some cases, your vehicle may be unable to continue driving. If this occurs, another vehicle alert should also be present to
provide more information and recommended actions.

1042

Owner's Manual

Owners Manual
This alert may be caused by a temporary condition that will be resolved automatically. If this alert clears during your current
drive, or is no longer present when you start your next drive, it was likely caused by a temporary condition. No action is
required.
This alert may also indicate a condition requiring front motor inspection and service. If this alert persists throughout
subsequent drives, it is recommended that you schedule service.Your vehicle is OK to drive in the meantime.
DI_u006
Vehicle automatically parked to prevent rollaway
Fasten seatbelt and close door to stay in gear
What this alert means:
Your vehicle has automatically shifted into Park (P) because it determined the driver was leaving or no longer present. This is
expected vehicle behavior under various circumstances.
Your vehicle will automatically shift into Park if all of these conditions are true:
• Autopark is not active
• Your vehicle is traveling slower than 1.4 mph (2.25 km/h) in Drive or Reverse
• The last driver activity was detected more than 2 seconds ago. Driver activity includes:
◦ Pressing the brake and/or accelerator pedal
◦ Manually steering the vehicle
And at least two of these conditions are true:
1. Driver seatbelt is detected as unbuckled.
2. Driver is not detected as present.
3. Driver door is detected as open.
1. Driver seatbelt is detected as unbuckled
2. Driver is not detected as present
3. Driver door is detected as open
4. One or more of the sensors used to detect the three conditions above (seatbelt buckle, seat occupancy, door latch) is not
working as expected
Your vehicle will also automatically shift into Park if any of these conditions is true:
• Door is detected as open
• Seatbelt is detected as unbuckled while speed is less than 0.1mph (0.15 km/h) in Drive or Reverse
• No driver activity is detected for 60 seconds
NOTE: If your vehicle is running software from 2015 or later, it will automatically shift into Park immediately when all three of
the conditions above are true, regardless of vehicle speed or last detected press of the brake / accelerator pedal.
Your vehicle will also automatically shift into Park if all of these conditions are true:
• Vehicle hold is engaged
• Your vehicle is in Drive (D) or Reverse (R)
• Driver door is detected as open
NOTE: Your vehicle will also automatically shift into Park when a charge cable is connected to the charge port.
What to do:
For more information on automatic shifting into Park, see Shifting on page 401Shifting on page 407.

Owner's Manual

1043

Owners Manual
DI_u015
Cruise control unavailable
What this alert means:
Cruise Control, including Traffic-Aware Cruise Control, is currently unavailable.
Cruise Control might be unavailable because:
• The driver canceled the request.
• The driver unbuckled their seatbelt.
• The front trunk or a door is open.
• The front trunk, trunk, or a door is open.
• The vehicle is traveling below the Cruise Control minimum speed of 18 mph (30 km/h).
• There is an environmental condition, such as limited visibility.
• Valet mode is active.
• Track mode is active.
What to do:
Take control and drive your vehicle manually.
When any condition preventing Cruise Control activation is no longer present, Cruise Control should be available. If this alert
persists throughout subsequent drives, schedule service at your earliest convenience. Your vehicle is OK to drive in the
meantime.
For more information, see Traffic-Aware Cruise Control on page 578Traffic-Aware Cruise Control on page 556.