NHTSA ID Number: 11006911
Manufacturer Communication Number: fsd_12-5-1-2_082024.pdf
TSB/Document Date: 2024-09-04
Summary
Tesla does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
Jack Mode
WARNING: Failure to enable Jack Mode can result in the vehicle self-leveling, resulting in damage, injury, or death.
If Model SModel XModel 3Model Y is equipped with air suspension, it automatically self-levels, even when the vehicle is
"asleep" and the touchscreen is powered off. To prevent damage when jacking or lifting the vehicle, you must activate Jack
mode to disable self-leveling. Jack mode prevents the self-leveling that occurs automatically.
When Model SModel XModel 3Model Y is in Jack Mode mode, a red air suspension indicator lights up on the
instrument panel.
NOTE: Jack mode may be unexpectedly enabled in situations where an object is supporting the vehicle's weight (for example
the bumper of the vehicle is resting on a curb).
1398
Owner's Manual
Maintenance
Parts and Accessories
Parts, Accessories, and Modifications
Use only genuine Tesla
parts and accessories. Tesla performs rigorous testing on parts to ensure their suitability, safety, and
reliability. Purchase these parts from Tesla, where they can be professionally installed and you can receive expert advice about
modifications to Model SModel XModel 3Model Y. Accessories are available for purchase online at the Tesla Shop. Some
accessories may not be available in your market region or compatible with your exact vehicle.
NOTE: Adding accessories to your vehicle may impact expected range, vehicle dimensions, etc.
Tesla is unable to assess parts manufactured by other distributors and therefore accepts no responsibility if you use non-Tesla
parts on Model SModel XModel 3Model Y.
WARNING: Installing non-approved parts and accessories, or performing non-approved modifications, can affect the
performance of Model SModel XModel 3Model Y and the safety of its occupants. Any damage caused by using or
installing non-approved parts, or by performing non-approved modifications, is not covered by the warranty.
WARNING: Tesla does not accept liability for death, personal injury or damage that occurs if you use or install nonapproved accessories or make non-approved modifications.
Body Repairs
If your Model SModel XModel 3Model Y is in a collision, contact Tesla or a Tesla-approved Body Shop to ensure that it is
repaired with genuine Tesla parts. Tesla has selected and approved body shops that meet strict requirements for training,
equipment, quality, and customer satisfaction.
Some repair shops and insurance companies might suggest using non-original equipment or salvaged parts to save money.
However, these parts may not meet Tesla's high standards for quality, fit, and corrosion resistance. In addition, non-original
equipment and salvaged parts (and any damage or failures they might cause) are not covered by the warranty.
Connecting Accessories to the 48V Power Feeds
Model SModel XModel 3Model Y is equipped with two power feeds. The power feeds provide access to the 48V low voltage
system, which can be used to power accessories.
CAUTION: Do not connect a power source (such as a solar panel or external battery) to a power feed. Doing so may
damage Model SModel XModel 3Model Y.
WARNING: The two power feeds are the only points at which you can connect accessories directly to the low voltage
system. Do not use any other low voltage wiring in Model SModel XModel 3Model Y to power accessories. Doing so can
lead to unpredictable or unexpected results (such as a total loss of power steering) and can affect the performance of
Model SModel XModel 3Model Y and the safety of its occupants. Any damage caused by using or installing nonapproved parts, or by performing non-approved modifications, is not covered by the warranty. Tapping into the power
feeds should only be done by knowledgeable and experienced individuals. Tesla does not accept liability for death,
personal injury or damage that occurs if you install accessories using non-approved methods or circuits.
48V Power Feed Specifications
There are two power feeds:
• One power feed is located on the roof (400W maximum draw).
• One power feed is located in the powered frunk (400W maximum draw).
Each power feed operates in the following range:
• Minimum: 28V
• Nominal: 44–50V
• Maximum: 58V
Each power feed contains three wires:
Owner's Manual
1399
Maintenance
Wire Color
Function
Red with a blue stripe
Positive (+) terminal: Provides 48V power
Green
Provides access to the Local Interconnect Network (LIN)
Roof power feed: Black with a blue stripe
Negative (-) terminal: Provides a grounding point
Powered frunk power feed: Brown with a blue stripe
NOTE: The power feeds are designed to stop providing power when current that exceeds the listed specifications is detected.
If a power feed unexpectedly stops providing power, reset them by touching Controls > Outlets & Mods > Reset.
CAUTION: If the wires in the vehicle do not match this information, use the mobile app to schedule a service
appointment.
Accessing the Power Feed on the Roof
1. Ensure that Model SModel XModel 3Model Y is powered off (see Powering Off on page 373).
WARNING: Failure to ensure the vehicle is powered off can result in serious injury. Tesla recommends wearing
appropriate personal protective equipment to mitigate any potential for injury.
2. Locate the strip of applique on the right side of the roof and use a flat, non-marring tool to gently lift under the edge and
release the five clips that hold it in place. Lift upwards to remove the applique.
3. Locate the shrink-wrapped loop of wires. This is the power feed.
1400
Owner's Manual
Maintenance
4. Remove the shrink wrap from the power feed, then splice or solder the accessory's wire harness to it.
WARNING: Use extreme care when accessing the power feed. Assume that the low voltage components of
Model SModel XModel 3Model Y, including all wires and connectors, are always energized. Because the 48V low
voltage system operates at a higher voltage than a typical low voltage system, there is an increased risk of personal
injury, arcing, or component damage if the low voltage components of Model SModel XModel 3Model Y are handled
improperly.
CAUTION: Carefully check the wiring of the accessory and ensure that you are connecting the positive (+) wire of the
accessory to the positive wire (red with a blue stripe) of the power feed, and the negative (-) wire of the accessory to
ground (black with a blue stripe). See 48V Power Feed Specifications on page 1399. Accessories without proper
power and grounding may not function as expected, and may be damaged as a result.
CAUTION: Ensure that the wires are properly insulated (taped or heatshrinked) after splicing or soldering an
accessory's wiring to the power feed.
5. Ensure your accessory or attachment is properly secured to the vehicle.
6. Replace the roof applique by pressing it into place to ensure that the trim clips are secured.
7. Power on the vehicle (see Starting and Powering Off on page 372) and enable power to the power feed, if desired (see
Enabling Power to the Power Feeds on page 1404).
Accessing the Power Feed in the Powered Frunk
To access the power feed in the powered frunk, you must first remove the frunk lining.
1. Open the powered frunk (see Powered Frunk on page 1166).
2. Ensure that Model SModel XModel 3Model Y is powered off (see Powering Off on page 373).
WARNING: Failure to ensure the vehicle is powered off can result in serious injury. Tesla recommends wearing
appropriate personal protective equipment to mitigate any potential for injury.
3. Remove the frunk maintenance panel by pulling it upwards to release the trim clips that hold it in place.
Owner's Manual
1401
Maintenance
4. Remove the two bump stops (one on each side above the headlights) by turning them counterclockwise.
5. Remove the windshield washer fluid cap.
6. Using a trim tool or flat, plastic tool, remove the two pieces of trim on the bottom of the frunk lining to expose the four bolts
that hold the lining in place.
7. Using a 10 mm socket, remove the four bolts on the bottom of the frunk and the two bolts beneath the maintenance panel.
1402
Owner's Manual
Maintenance
8. Carefully lift the frunk lining partially upward and unplug the emergency interior release connector. Once the connector is
unplugged, the frunk lining can be removed.
CAUTION: As you remove the frunk lining, be careful not to damage or jostle the connector for the powered frunk
emergency interior release.
9. Locate the shrink-wrapped wires. This is the power feed.
Owner's Manual
1403
Maintenance
10. Remove the shrink wrap from the power feed, then splice or solder the accessory's wire harness to it.
WARNING: Use extreme care when accessing the power feed. Assume that the low voltage components of
Model SModel XModel 3Model Y, including all wires and connectors, are always energized. Because the 48V low
voltage system operates at a higher voltage than a typical low voltage system, there is an increased risk of personal
injury, arcing, or component damage if the low voltage components of Model SModel XModel 3Model Y are handled
improperly.
CAUTION: Carefully check the wiring of the accessory and ensure that you are connecting the positive (+) wire of the
accessory to the positive wire (red with a blue stripe) of the power feed, and the negative (-) wire of the accessory to
ground (brown with a blue stripe). See 48V Power Feed Specifications on page 1399. Accessories without proper
power and grounding may not function as expected, and may be damaged as a result.
CAUTION: Ensure that the wires are properly insulated (taped or heatshrinked) after splicing or soldering an
accessory's wiring to the power feed.
11. Ensure your accessory or attachment is secured to the vehicle.
12. Replace the powered frunk lining, connect the emergency interior release connector, and replace all fasteners and trim.
Torque the bolts to 12 Nm (8.87 ft-lb).
13. Power on the vehicle (see Starting and Powering Off on page 372) and enable power to the power feed, if desired (see
Enabling Power to the Power Feeds on page 1404).
Enabling Power to the Power Feeds
Once you have connected an accessory to a power feed, enable power from the touchscreen. Touch Controls > Outlets &
Mods and then touch a power feed on the touchscreen to enable it.
CAUTION: Leaving an accessory powered depletes the High Voltage Battery. Power to the power feed shuts off when
the capacity of the High Voltage Battery is very low.
By default, the power feeds stop providing power when you exit Model SModel XModel 3Model Y and close the doors. To
instead keep the power feeds on when you leave the vehicle, touch Keep On Cabin and Bed Outlets (see Keep On Cabin and
Bed Outlets on page 1113).
Using RFID Transponders
When attaching an RFID transponder (used by many automated toll systems) inside Model SModel XModel 3Model Y, place
the transponder next to the rear view mirror. This ensures best results and minimizes any obstruction to your driving view.
Refer to the RFID manufacturer's instructions for specific placement.
NOTE: You can also attach a weather-proof transponder to the front license plate.
1404
Owner's Manual
Maintenance
Do It Yourself Maintenance
Learn how to perform simple Do It Yourself procedures, such as replacing wiper blades and cabin filters, or installing the paint
protection film kit. Go to https://www.tesla.com/support/do-it-yourself-guides for instructions, animations, and videos of
these procedures.
NOTE: Due to market region or vehicle configuration specifics, some parts and procedures may not be available for your
vehicle. When navigating to https://www.tesla.com/support/do-it-yourself-guides, select your vehicle, region, and/or
language to see an updated list of parts and accessories available for your region.
CAUTION: Perform each procedure in a dry and well-lit area. For your safety, only perform a procedure if you feel
comfortable doing so, and always follow provided instructions.
Owner's Manual
1405
Specifications
Identification Labels
Vehicle Identification Number
You can find the VIN at the following locations:
• The Tesla mobile app.
• Touch Controls > Software.
• Stamped onto the driver's side A-pillar. Can be seen by looking through the windshield on the driver's side of the vehicle.
• Printed on the Vehicle Certification label, located on the door pillar. Can be seen when the driver’s door is open.
1406
Owner's Manual
Specifications
Emission Control Label
The emission control label is located on the opening face of the powered frunk.
Owner's Manual
1407
Specifications
Vehicle Loading
It is important to understand your vehicle's original tire sizes and pressures, and the GVWR (Gross Vehicle Weight Rating) and
GAWR (Gross Axle Weight Rating). This information can be found on two labels attached to the front door pillar on the driver's
side of the vehicle.
1. Tire and Loading Information Label
2. Vehicle Certification Label
WARNING: Overloading Model SModel XModel 3Model Y has an adverse effect on braking and handling, which can
compromise your safety or cause damage.
CAUTION: Never store large amounts of liquid in Model SModel XModel 3Model Y. A significant spill can cause
electrical components to malfunction.
Tire and Loading Information Label
The Tire and Loading Information label provides:
• The maximum number of occupant seating positions.
• The maximum vehicle capacity weight.
• The size of the original tires.
• The cold inflation pressures for the original front and rear tires. These pressures are recommended to optimize ride and
handling characteristics.
1408
Owner's Manual
Specifications
Never change this label, even if you use different tires in the future.
NOTE: If Model SModel XModel 3Model Y is loaded to its full capacity, double check all tires to ensure they are inflated to
their recommended pressure levels (see Maintaining Tire Pressures on page 1375).
WARNING: Tire pressures printed on the Tire and Loading Information label DO NOT APPLY to towing. When towing, tire
pressures must be increased. For information about the tire pressures required when towing, refer to see Towing a
Trailer on page 1237.
Vehicle Certification Label
WARNING: The Vehicle Certification label specifies the weight ratings for Model SModel XModel 3Model Y based on
the tires that were installed at time of manufacture and the tire pressures indicated on the Tire and Loading Information
label. However, the weight ratings will change if you change the factory-installed tires or inflate tires to a pressure that
differs from those shown on the Tire and Loading Information label.
The Vehicle Certification label provides:
• GVWR - Gross Vehicle Weight Rating. The maximum allowable total mass of Model SModel XModel 3Model Y. This is
calculated as the weight of Model SModel XModel 3Model Y equipped with the heaviest factory selectable options, all
passengers, fluids, and cargo.
• GAWR FRT and GAWR RR - Gross Axle Weight Rating for the front and rear axles. The GAWR is the maximum distributed
weight that each axle can support.
CAUTION: To prevent damage, never load Model SModel XModel 3Model Y so that it is heavier than GVWR or exceeds
the individual GAWR weights.
Roof Racks
Model SModel XModel 3Model Y supports the use of Tesla-approved roof racks. Roof racks can be installed over the roof,
over the bed, or both. To install roof racks, you must use only roof rack systems that have been approved by Tesla. You can
find the roof rack instructions in the box or on the Tesla Shop.
Maximum Load on Roof Racks: 220 lb (100 kg) per 2-crossbar set. For example, a 2-crossbar set placed on the roof has a
maximum load of 220 lb. An additional 2-crossbar set placed over the cargo bed also has a maximum load of 220 lb (100 kg).
Owner's Manual
1409
Specifications
See Carrying Accessories and Crossbars on page 1245 for more information.
CAUTION: Failure to use the correct roof racks and follow the instructions can cause significant damage.
WARNING: When loading the roof racks, distribute the load evenly and maintain a low center of gravity. Loaded vehicles,
with higher centers of gravity, may handle differently than unloaded vehicles. Take extra precautions, such as slower
speeds and increased stopping distance, when driving heavily loaded roof racks.
Calculating Load Limits
1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the “Tire
and Loading Information” label.
2. Determine the combined weight of all occupants that will ride in the vehicle.
3. Subtract the combined weight of the occupants from XXX lbs or XXX kg (see Step 1).
4. The resulting figure equals the available cargo load capacity. For example, if the “XXX” amount equals 1400 lbs (635 kg)
and there will be five 150 lb (68 kg) passengers in the vehicle, the amount of available cargo capacity is 650 lbs (1400 ‑ 750
(5 x 150) = 650 lbs) or 295 kg (635 ‑ 340 (5 x 68) = 295 kg).
5. Determine the combined cargo weight being loaded on the vehicle. That weight must not exceed the available cargo load
capacity calculated in Step 4.
WARNING: The powered frunk and the cargo bed are the preferred places to carry objects. In a collision, or during hard
braking and sharp turns, loose items in the cabin could injure occupants.
Example Load Limit Calculations
How much cargo Model SModel XModel 3Model Y can carry depends on the number and weight of passengers. The following
calculated load limit examples assume passengers weigh 150 lbs (68 kg). If passengers weigh more or less, available cargo
weight decreases or increases respectively.
Driver and one passenger
Description
Total
Vehicle capacity weight
954 lbs (433 kg)
Subtract occupant weight (2 x 150 lbs/68 kg)
300 lbs (136 kg)
1410
Owner's Manual
Specifications
Description
Total
Available cargo weight
654 lbs (297 kg)
Driver and four passengers
Description
Total
Vehicle capacity weight
954 lbs (433 kg)
Subtract occupant weight (5 x 150 lbs/68 kg)
750 lbs (340 kg)
Available cargo weight
204 lbs (93 kg)
Cautions and Warnings
WARNING: Drive cautiously when Cybertruck is carrying a large load. Increase braking distance, reduce speed when
making sharp turns, and avoid abrupt steering. Failure to drive cautiously increases the risk of losing control which can
result in property damage, personal injury, and death.
WARNING: The loading capacity of your vehicle is limited either by how much space is available (volume capacity) or by
how much weight the vehicle can carry (payload capacity). When you have loaded Cybertruck to its maximum weight
capacity, do not add more cargo, even if there is space available. Overloading, or improper loading, can contribute to
properly damage, personal injury, or death.
Owner's Manual
1411
Specifications
Dimensions, Weights, and Cargo Capacity
Dimensions - Exterior
NOTE: Adding accessories can affect the dimensions listed.
Callout
Measurement (in)
Measurement (mm)
223.74
5,682.9
Including mirrors
95.01
2,413.3
Folded mirrors
86.64
2,200.7
Excluding mirrors
79.99
2,031.8
Entry/Exit air setting
68.54
1740.8
Low air setting
69.13
1755.8
Medium air setting
70.70
1795.8
High air setting
73.06
1855.8
Very High air setting
74.64
1895.8
Extract (highest) air setting
76.61
1945.8
Wheelbase
143.11
3,635.0
E - Overhang
Front
34.58
878.3
F - Overhang
Rear
46.05
1,169.6
Entry/Exit air setting
7.93
201.3
Low air setting
8.52
216.3
Medium air setting
10.09
256.3
High air setting
12.45
316.3
Very High air setting
14.03
356.3
Extract (highest) air setting
16.00
406.3
Front and Rear
69.76
1,772.0
A
B - Overall Width
C - Overall Height
D
G - Ground Clearance
H - Track
1412
Description
Overall Length
Owner's Manual
Specifications
Dimensions - Cargo Bed
Callout
Description
Measurement (in)
Measurement (mm)
A
Maximum Height - Front
28.66
727.9
B
Maximum Height - Rear
19.89
505.2
C
Width at Floor
51.00
1,295.4
D
Length at Floor
72.92
1,852.2
Dimensions - Interior Cabin
Location
Measurement (in)
Measurement (mm)
Head Room - Front
Head Room - Rear
41.69
39.05
1,058.8
991.9
Leg Room - Front
Leg Room - Rear
41.09
40.90
1,043.6
1,038.8
Shoulder Room - Front
Shoulder Room - Rear
63.31
62.06
1,608.0
1,576.4
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: fsd_12-5-1-2_082024.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-31
MFR Internal Campaign ID/Software Version: fsd-12-5-1-2
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.