32

Owners Manual
To override the selection, press the brake pedal and use the drive mode strip on touchscreen to shift into your desired drive
mode (Drive, Reverse, Park; see Shift Using the Touchscreen on page 32).
Confirm the drive mode selection and follow the instructions on the touchscreen before you press the accelerator.
WARNING: As always, be aware of your vehicle and surroundings before driving. Never rely on Cybertruck to
automatically select a suitable drive mode without confirming the selection before you start to drive.
If Auto Shift from Park is unavailable, the touchscreen displays a message.
Cybertruck automatically selects a drive mode when:
• Auto Shift from Park is enabled.
• Cybertruck is in Park.
• The driver's seat belt is fastened.
• The brake pedal is pressed.
• All doors and trunks are closed.
• The drive mode selector on the overhead console is not activated (see Shift Using the Overhead Console on page 33).
• The cameras are free of obstructions (see Cameras on page 200) and Cybertruck has enough input to make a selection.
NOTE: Cybertruck does not automatically select drive modes in Valet Mode.
Shift Using the Overhead Console
In addition to manually shifting on the touchscreen, you can shift by pressing P, R, N or D located on the overhead console. In
most situations, these buttons are not available until you press one of the buttons to activate it. When active, the LEDs
associated with each button illuminate and when you select P, R, N or D, the associated LED illuminates.
In situations where the touchscreen is unavailable (for example, experiencing a technical issue), or Cybertruck is in Valet or
Transport Mode, the drive mode selector on the overhead console illuminates automatically and there is no need to touch it.
NOTE: You can also activate the drive mode selector on the overhead console by simultaneously and briefly pressing both
scroll buttons on the steering wheel. However, if you press and hold both buttons simultaneously, the drive mode selector
activates and the touchscreen restarts (see Restarting the Touchscreen on page 181).
NOTE: The front trunk must be closed to shift using the overhead console.

33

Owner's Manual

Owners Manual

1. Park
2. Reverse
3. Neutral
4. Drive
NOTE: When the touchscreen is available for shifting and you have manually activated the drive mode selector on the overhead
console, the overhead console automatically deactivates if you don't shift after a short amount of time.
Park
To manually shift into Park, press the brake pedal and touch the Park button on the touchscreen's drive mode strip. If the
touchscreen is unavailable, press Park on the drive mode selector located on the overhead console.
Cybertruck automatically shifts into Park to prevent roll-away while driving in low speeds. This happens whenever you
connect a charge cable, unbuckle your seat belt, or open the door while in Drive or Neutral. Ensure the charge cable is
removed, buckle your seat belt, and close the door before shifting from Park.
Attempting to engage the parking brake above 5 mph (8 km/h) will result in emergency braking (see Braking and Stopping on
page 290).
NOTE: In emergency situations, if the brakes are not functioning properly, you can press and hold the Park button on the
touchscreen's drive mode strip to apply the brakes and remove drive torque while the button is held. Do not use this method to
stop the vehicle unless absolutely necessary.
NOTE: You must always press the brake pedal to shift from Park.
CAUTION: Cybertruck will not shift from Park if a charge cable is plugged in, or if the charge port is unable to determine
whether a charging cable is plugged in. In situations when Cybertruck does not shift from Park, check the touchscreen
for instructions on how to proceed.
WARNING: It is the driver's responsibility to always ensure the vehicle is in Park before exiting. Never rely on Cybertruck
to automatically shift into Park for you.

Owner's Manual

34

Owners Manual
Drive
To manually shift into Drive, swipe up on the drive mode strip located on the touchscreen or, if the touchscreen is unavailable,
press D on the drive mode selector located on the overhead console. You can shift into Drive when Cybertruck is stopped or
moving less than 5 mph (8 km/h) in Reverse.
Reverse
To manually shift into Reverse, swipe down on the drive mode strip located on the touchscreen or, if the touchscreen is
unavailable, press R on the drive mode selector located on the overhead console. You can shift into Reverse when Cybertruck
is stopped or moving less than 5 mph (8 km/h) in Drive.
Neutral
Neutral allows Cybertruck to roll freely when you are not pressing the brake pedal. To shift into Neutral, do any of the
following:
• Open Controls, then press and hold the Neutral icon until Cybertruck engages Neutral.
• Choose Neutral from the drive mode selector on the overhead console.
NOTE: When Cybertruck is traveling over 5 mph (8 km/h) and you swipe up or down on the touchscreen's drive mode strip, a
Neutral icon displays at the bottom of the drive mode strip from which you can also choose to engage Neutral.
NOTE: You must press the brake pedal to shift out of Neutral if Cybertruck is moving slower than approximately 5 mph (8
km/h).
Cybertruck automatically shifts into Park when you open the driver's door to exit the vehicle unless the vehicle is in certain
modes such as Transport or Car Wash Mode which allows the vehicle to stay in Neutral even when you leave.
Keeping Your Vehicle in Neutral (Transport Mode)
To keep Cybertruck in Neutral when you exit, allowing it to roll freely (for example, pulling onto a flatbed truck), you must
activate Transport mode:
1. Shift into Park.
2. Press the brake pedal.
3. Touch Controls > Service > Towing. The touchscreen displays a message reminding you how to properly transport
Cybertruck.
4. Touch Enter Transport Mode. The button turns blue to show that Cybertruck is now in Transport Mode. Cybertruck is now
free-rolling and can be rolled slowly (no faster than walking speed) for short distances or winched (for example, onto a
flatbed truck).
For more information on Transport Mode, see Activate Transport Mode on page 470.
NOTE: In Transport Mode, Cybertruck does not shift into a drive mode. You must first cancel Transport Mode by touching Exit
Transport Mode. Transport Mode also cancels if you use the touchscreen to shift into Park.

35

Owner's Manual

Owners Manual
Wipers and Washers

Owner's Manual

36

Owners Manual
Braking and Stopping
Braking Systems
WARNING: Properly functioning braking systems are critical to ensure safety. If you experience a problem with the brake
pedal, brake calipers, or any component of a Cybertruck braking system, contact Tesla immediately.
Cybertruck has an anti-lock braking system (ABS) that prevents the wheels from locking when you apply maximum brake
pressure. This improves steering control during heavy braking in most road conditions.
During emergency braking conditions, the ABS constantly monitors the speed of each wheel and varies the brake pressure
according to the grip available.
The alteration of brake pressure can be felt as a pulsing sensation through the brake pedal. This demonstrates that the ABS is
operating and is not a cause for concern. Keep firm and steady pressure on the brake pedal while experiencing the pulsing.
(USA) The ABS indicator briefly flashes amber on the when you first start Cybertruck. If this indicator lights up
at any other time, an ABS fault has occurred and the ABS is not operating. Contact Tesla. The braking system
remains fully operational and is not affected by an ABS failure. However, braking distances may increase. Drive
cautiously and avoid heavy braking.
(Canada) The ABS indicator briefly flashes amber on the when you first start Cybertruck. If this indicator lights
up at any other time, an ABS fault has occurred and the ABS is not operating. Contact Tesla. The braking
system remains fully operational and is not affected by an ABS failure. However, braking distances may
increase. Drive cautiously and avoid heavy braking.
(USA) If the displays this red brake indicator at any time other than briefly when you first start Cybertruck, a
brake system fault is detected, or the level of the brake fluid is low. Contact Tesla immediately. Apply steady
pressure and keep the brakes firm to bring the vehicle to a stop when safe to do so.

(Canada) If the displays this red brake indicator at any time other than briefly when you first start Cybertruck, a
brake system fault is detected, or the level of the brake fluid is low. Contact Tesla immediately. Apply steady
pressure and keep the brakes firm to bring the vehicle to a stop when safe to do so.

(USA) The displays this amber brake indicator if a brake booster fault is detected. Apply steady pressure and
keep the brakes firm to stop the vehicle when safety permits. Hydraulic Boost Compensation will be active (see
Hydraulic Boost Compensation on page 38).

(Canada) The displays this amber brake indicator if a brake booster fault is detected. Apply steady pressure and
keep the brakes firm to stop the vehicle when safety permits. Hydraulic Boost Compensation will be active (see
Hydraulic Boost Compensation on page 38).

Emergency Braking

In an emergency, fully press the brake pedal and maintain firm pressure, even on low traction surfaces. The ABS varies the
braking pressure to each wheel according to the amount of traction available. This prevents wheels from locking and ensures
that you stop as safely as possible.
WARNING: Do not pump the brake pedal. Doing so interrupts operation of the ABS and can increase braking distance.

37

Owner's Manual

Owners Manual
WARNING: Always maintain a safe distance from the vehicle in front of you and be aware of hazardous driving
conditions. While the ABS can improve stopping distance, it cannot overcome the laws of physics. It also does not
prevent the danger of hydroplaning (where a layer of water prevents direct contact between the tires and the road).
CAUTION: Automatic Emergency Braking (see Collision Avoidance Assist on page 76) may intervene to automatically
brake in situations where a collision is considered imminent. Automatic Emergency Braking is not designed to prevent a
collision. At best, it can minimize the impact of a frontal collision by attempting to reduce your driving speed. Depending
on Automatic Emergency Braking to avoid a collision can result in serious injury or death.
CAUTION: In emergency situations, if the brakes are not functioning properly, press and hold the Park button to bring
Cybertruck to a stop. Do not use this method to stop the vehicle unless absolutely necessary.
Dynamic Brake Lights (if equipped)

If you are driving over 30 mph (50 km/h) and brake forcefully (or if Automatic Emergency Braking engages), the brake lights
flash quickly to warn other drivers that Cybertruck is rapidly slowing down. If Cybertruck stops completely, the hazard warning
lights flash. Flashing continues until you press the accelerator or manually press the hazard lights button to turn them off
(see ).
NOTE: When towing a trailer (if applicable), the brake lights on the trailer also operate as described above, even when the
trailer is not equipped with a separate braking system.
WARNING: When towing a trailer (if applicable), always increase your following distance. Sudden braking may result in
skidding, jack-knifing, and loss of control.
Brake Disc Wiping

To ensure brakes remain responsive in cold and wet weather, Cybertruck is equipped with brake disc wiping. When cold and
wet weather is detected, this feature repeatedly applies an imperceptible amount of brake force to remove water from the
surface of the brake discs.
Hydraulic Fade Compensation

Cybertruck is equipped with hydraulic fade compensation. This assists in monitoring brake system pressure and ABS activity
for instances of reduced brake performance. If reduced brake performance is detected (for example, as a result of brake fade,
or cold or wet conditions), you may hear a sound, feel the brake pedal pull away from your foot, and notice a strong increase in
braking. Brake as you normally would and continue to press the brake pedal without releasing or pumping the brakes.
CAUTION: In emergency situations, if the brakes are not functioning properly, press and hold the Park button to bring
Cybertruck to a stop. Do not use this method to stop the vehicle unless absolutely necessary.
WARNING: Always maintain a safe driving distance from the vehicle in front of you and exercise caution when driving
conditions are hazardous. Brake disc wiping and hydraulic fade compensation is not a substitute for adequately applying
the brakes.
Hydraulic Boost Compensation

Cybertruck is equipped with a brake booster that activates the brakes when the brake pedal is pressed. Hydraulic boost
compensation provides mechanical assistance if the brake booster fails. If a brake booster failure is detected, the brake pedal
feels stiffer to press and you may hear a sound when you press the brake pedal. To stop Cybertruck, apply steady force to the
brake pedal without releasing or pumping. Drive cautiously and maintain a safe distance from other road users—brake pedal
responsiveness and braking performance may be degraded.
Regenerative Braking
Whenever Cybertruck is moving and your foot is off the accelerator, regenerative braking slows down the vehicle and feeds
any surplus power back to the Battery. By anticipating your stops and reducing or removing pressure from the accelerator
pedal to slow down, you can take advantage of regenerative braking to increase driving range.
NOTE: If regenerative braking is aggressively slowing Cybertruck (such as when your foot is completely off the accelerator
pedal at highway speeds), the brake lights turn on to alert others that you are slowing down.
NOTE: Because Cybertruck uses regenerative braking, the brake pads are typically used less frequently than those in
traditional braking systems. To avoid the accumulation of rust and corrosion, Tesla recommends frequently pressing the brake
pedal to apply the mechanical brakes and dry the brake pads and rotors.
WARNING: In snowy or icy conditions, Cybertruck may experience loss of traction during regenerative braking.

Owner's Manual

38

Owners Manual
Parking Brake
To engage the parking brake, touch Controls > Safety, press the brake pedal and then touch Parking Brake.
(USA) A red parking brake indicator lights up on the when the parking brake is engaged.

(Canada) A red parking brake indicator lights up on the when the parking brake is engaged.

The parking brake is released when the vehicle is shifted into another gear.
(USA) If the parking brake experiences an electrical issue, the amber parking brake indicator lights up and a
fault message displays on the .

(Canada) If the parking brake experiences an electrical issue, the amber parking brake indicator lights up and a
fault message displays on the .

NOTE: The parking brake operates on the rear wheels only, and is independent of the pedal-operated brake system.
CAUTION: In the unlikely event that Cybertruck loses electrical power, you cannot access the touchscreen and are
therefore unable to release the parking brake without first jump starting (see Jump Starting on page 152).
WARNING: In snowy or icy conditions the rear wheels may not have sufficient traction to prevent Cybertruck from
sliding down a slope, particularly if not using winter tires. Avoid parking on hills in snowy or icy conditions. You are
always responsible for parking safely.
WARNING: Your Cybertruck may display an alert if the road is too steep to safely park on, or if the parking brakes are not
properly engaged. These alerts are for guidance purposes only and are not a substitute for the driver’s judgment of safe
parking conditions, including specific road or weather conditions. Do not depend on these alerts to determine whether
or not it is safe to park at any location. You are always responsible for parking safely.
Brake Wear
Cybertruck brake pads are equipped with wear indicators. A wear indicator is a thin metal strip attached to the brake pad that
squeals as it rubs against the rotor when the pad wears down. This squealing sound indicates that the brake pads have
reached the end of their service life and require replacement. To replace the brake pads, contact Tesla Service.
Brakes must be periodically inspected visually by removing the tire and wheel. For detailed specifications and service limits for
rotors and brake pads, see Subsystems on page 144. Additionally, Tesla recommends cleaning and lubricating the brake
calipers every year or 12,500 miles (20,000 km) if in an area where roads are salted during winter months.
WARNING: Neglecting to replace worn brake pads damages the braking system and can result in a braking hazard.

39

Owner's Manual

Owners Manual
Cruise Control
Cruise control makes it easy to maintain a consistent driving speed. Cruise control is primarily intended for driving on dry,
straight roads, such as highways. It should not be used on city streets and in heavy traffic.
Operating Cruise Control
WARNING: Do not use cruise control on winding or slippery road surfaces, or when traffic conditions make it unsafe to
drive at a consistent speed.
Cruise control is now active.
The displays a gray speedometer icon to show your set speed.
The instrument panel displays the CRUISE message above the speedometer and an arrow displays on the
speedometer to show your set speed.

You can manually accelerate past the set speed at any time when cruise control is active. However, when you release the
accelerator, Cybertruck slows down to the set speed.
WARNING: Driving downhill can increase driving speed, causing Cybertruck to exceed your cruising speed.

Owner's Manual

40

Owners Manual
Park Assist
Cybertruck is designed to detect the presence of objects. When driving slowly (for example, when parking), the vehicle alerts
you if an object is detected in close proximity of your Cybertruck. The vehicle alerts you when objects are detected in front of
Cybertruck when you are in Drive, and behind Cybertruck when you are in Reverse.
WARNING: You may not be alerted if Cybertruck rolls freely in the opposite direction (for example, Park Assist does not
display an alert if Cybertruck rolls backwards down a hill while in Drive).
NOTE: Park Assist may be disabled when a bicycle is detected, when the tailgate is down, or when Cybertruck is in trailer
mode.
WARNING: Never depend on Park Assist to inform you if an area you are approaching is free of objects and/or people.
Several external factors can reduce the performance of Park Assist, causing either no readings or false readings (see
Limitations and False Warnings on page 42). Therefore, depending on Park Assist to determine if Cybertruck is
approaching an obstruction can result in damage to the vehicle and/or objects, and can potentially cause serious injury.
Always inspect the area with your own eyes. When reversing, perform shoulder checks and use all mirrors. Park assist
does not detect children, pedestrians, bicyclists, animals, or objects that are moving, protruding, located too far above
or below the sensors or cameras, or too close or too far from the sensors or cameras. Park Assist is for guidance
purposes only and is not intended to replace your own direct visual checks. It is not a substitute for careful driving.
Tesla Vision Park Assist
NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be
equipped with Tesla Vision Park Assist.
Your vehicle uses the cameras mounted on the front, rear, and sides of Cybertruck to create a high-fidelity reproduction of
surrounding objects on the touchscreen.
The colors on the visualization correspond to the distance between Cybertruck and the object shown. Red is closer to
Cybertruck, and yellow is farther from Cybertruck.
You can enable or disable Tesla Vision Park Assist by touching Controls > Autopilot, scrolling to Park Assist, and toggling
between Standard and Tesla Vision.
NOTE: Enabling Tesla Vision Park Assist disables Lane Assist visualizations. For more information, see Lane Assist on page
72.
Visual and Audio Feedback
When you shift to Reverse, the Park Assist view displays on the touchscreen, showing objects that are in close proximity to the
front and rear of Cybertruck. This view closes when you shift into Drive unless an object is detected close to the front of
Cybertruck, in which case the Park Assist view closes automatically when you start driving faster than the speed at which Park
Assist operates. When reversing, visual feedback also displays on the touchscreen (see Rear-Facing Camera on page 201).
You can manually close the park assist view on the touchscreen by touching the X.
When driving at low speeds with the Camera app displayed on the touchscreen, you can switch to the Park Assist view by
touching the button located in the upper left corner of the Camera app screen. This is useful if you need assistance with
parallel parking.
If chimes are turned on (see Controlling Audible Feedback on page 41), an audible beep sounds as you approach an object.
NOTE: If Park Assist is unable to provide feedback, the displays an alert message.
CAUTION: Keep sensors and cameras clean from dirt, debris, snow, and ice. Avoid using a high pressure power washer
on the sensors and cameras, and do not clean a sensor or camera with a sharp or abrasive object that can scratch or
damage its surface.
CAUTION: Do not install accessories or stickers on or near the sensors or cameras.
Controlling Audible Feedback
You can use Park Assist with or without audible feedback. To turn chimes on or off, touch Controls > Safety > Park Assist
Chimes.

41

Owner's Manual

Owners Manual
Limitations and False Warnings
Park Assist may not function correctly in these situations:
• One or more of the sensors or cameras is damaged, dirty, or obstructed (such as by mud, ice, or snow, or by a vehicle bra,
excessive paint, or adhesive products such as wraps, stickers, rubber coating, etc.).
• The object is located below approximately 8 inches (20 cm) (such as a curb or low barrier).
CAUTION: Shorter objects that are detected (such as curbs or low barriers) can move into a blind spot. Cybertruck
cannot alert you about an object while it is in a blind spot.
• Weather conditions (heavy rain, snow, or fog).
• The object is thin (such as a sign post).
• Park Assist’s operating range has been exceeded.
• The object is sound-absorbing or soft (such as powder snow).
• The object is sloped (such as a sloped embankment).
• Cybertruck has been parked in, or being driven in, extremely hot or cold temperatures.
• The sensors are affected by other electrical equipment or devices that generate ultrasonic waves.
• You are driving in a location where the sensors' waves are deflected away from the vehicle (such as driving next to a wall or
pillar).
• The object is located too close to the bumper.
• A bumper is misaligned or damaged.
• An object that is mounted to Cybertruck is interfering with and/or obstructing Park Assist (such as a bike rack or bumper
sticker).
• Cybertruck rolls freely in the opposite direction you selected (for example, Park Assist does not display an alert if
Cybertruck rolls backwards down a hill while in Drive).
Other Parking Aids
In addition to Park Assist, when shifted into Reverse, the backup camera displays a view of the area behind Cybertruck (see
Rear-Facing Camera on page 201).

Owner's Manual

42

Owners Manual
Hill Start Assist
Hill Start Assist automatically engages the brakes for approximately one second when on a hill. This prevents Cybertruck from
rolling during the time it takes for you to move your foot from the brake pedal to the accelerator pedal. Hill Start Assist
engages the brakes only if Cybertruck is in Drive and facing uphill, or in Reverse and facing downhill.
WARNING: After approximately one second, Hill Start Assist no longer brakes your vehicle and it could roll. Therefore,
quickly move your foot from the brake pedal to the accelerator pedal. Never rely on Hill Start Assist to prevent
Cybertruck from rolling for more than one second. Failure to do so can result in a collision.

43

Owner's Manual

Owners Manual
Traction Control
How It Works
The traction control system constantly monitors the speed of the front and rear wheels. If Cybertruck experiences a loss of
traction, the system minimizes wheel spin by controlling brake pressure and motor power. By default, the traction control
system is on. Under normal conditions, it should remain on to ensure maximum safety.
This yellow indicator flashes on the whenever the traction control system is actively controlling brake pressure
and motor power to minimize wheel spin. If the indicator stays on, a fault is detected with the traction control
system. Contact Tesla Service.

WARNING: If the above indicator remains illuminated in situations in which you have not disabled the traction control
system (described next), the traction control system may not be operating correctly. Contact Tesla Service immediately.
WARNING: Traction control cannot prevent collisions caused by driving dangerously or turning too sharply at high
speeds.

Driver Profiles
When you first adjust the driver’s seat, steering wheel position, or exterior side mirrors, the touchscreen prompts you to
create a driver profile to save these adjustments. Your profile also saves various preferences you make while customizing
Cybertruck.
To save your profile settings to the cloud and access them across multiple Tesla vehicles, set up a Tesla Profile (see Using
Tesla Profiles on page 45).
To add a new driver profile, touch the driver profile icon in Controls. Then touch Driver Profile Settings > Add
New Driver, type the driver's name and touch Create Profile. Follow the onscreen instructions to save mirror and
steering wheel position to the driver profile.

Check the Use Easy Entry checkbox if you want to save (or use existing) Easy Entry settings in which the driver's seat and the
steering wheel are automatically adjusted to make it easy to enter and exit Cybertruck.
If you change the position of the driver’s seat, steering wheel, or exterior side mirrors after you have saved or chosen a driver
profile, the touchscreen prompts you to Save the new position or Restore the previously saved position (other settings are
automatically saved). To change a setting without saving or restoring, just ignore the prompt.
To delete a driver profile, touch the driver profile icon in Controls, touch Driver Profile Settings and select the driver profile you
want to remove. Once selected, Delete the driver profile.
NOTE: Valet mode is a built-in driver profile that limits speed and restricts access to some Cybertruck features (see Valet
Mode on page 46).
NOTE: To stop automatic adjustments that are in process based on a driver's profile, touch Stop on the Driver Profile
dropdown menu. Automatic adjustments also stop if you manually adjust a seat, mirror, or the steering wheel.
Selecting Between Driver Profiles
To adjust Cybertruck based on a driver’s profile, touch the driver profile icon at the top of the Controls screen.
Then choose the driver, and Cybertruck is adjusted based on the settings that have been saved to the chosen
driver profile. See Using Tesla Profiles on page 45 to learn more about saving profile settings to the cloud for
easy access across multiple Tesla vehicles.

Owner's Manual

44

Owners Manual
Using Tesla Profiles
Driver profile settings, such as seat adjustments, temperature preferences, navigation Recents and Favorites, media settings,
and data sharing preferences can be saved into a Tesla Profile that is synced to every supported vehicle under your Tesla
Account. This provides convenient access to your profile settings and preferences across all your Tesla supported vehicles.
To set up your Tesla Profile, navigate to Driver Profile Settings and select your Tesla Account name. You can choose to set it up
as a New Profile or copy the settings from an existing driver profile that you were previously using.
To set up a Tesla Profile for additional drivers, share your vehicle with them from the mobile app and navigate to Security &
Drivers > Manage Drivers > Add Driver. Their Tesla Profile will appear in the Driver Profile settings after accepting the invitation
from their Tesla Account. If you remove their access to the vehicle, it also removes their Tesla Profile. For more information on
granting mobile app access, see Granting Access to a Second Driver on page 20. In addition, you can change your profile
picture from your Tesla Mobile App.
NOTE: Some vehicle settings, such as seat, mirror, steering wheel, and air vent positions are only synced between the same
vehicle models. If the seat or steering positions do not restore as expected, touch Controls > Service > Seat & Steering
Calibration on the affected vehicles.
To remove your Tesla Profile from a vehicle, remove that vehicle from your Tesla account:
1. In the Tesla mobile app, touch the profile icon in the top-right corner.
2. Touch Add/Remove Products.
3. Touch Remove.
4. Select the vehicle you'd like to remove.
Saved Settings
A subset of the settings that you choose to customize your Cybertruck are automatically saved to your driver's profile. Once
saved, a green check mark appears next to the driver profile icon on the touchscreen. Examples of automatically saved driver
profile settings are:
• Navigation, temperature, lights and display settings.
• Autopilot and driving preferences.
Linking a Driver Profile to a Key
You can link a driver profile to a key (or keys) to allow Cybertruck to automatically select the correct driver profile when the
linked key is detected as you approach the vehicle and open the driver's door. To link a driver profile to a key, first ensure you
are using your desired driver profile, then touch Controls > Locks > Keys. You can toggle the driver icon to link or delete a key
to the desired driver profile. The name of the driver profile appears under the key to show that it is linked.
NOTE: Cybertruck supports up to 10 driver profiles. You can link multiple keys to a driver profile, but you cannot link multiple
driver profiles to a single key.
Easy Entry
You can define an Easy Entry setting that moves the steering wheel and driver's seat to make it easy to enter and exit
Cybertruck. Any driver can use the Easy Entry setting by associating it with their driver profile. When the Easy Entry setting is
associated with a driver profile, the steering wheel and driver's seat automatically adjust when in Park and the driver's seat belt
is unbuckled, allowing an easy exit from (and next entrance into) Cybertruck. When returning to the vehicle and stepping on
the brake pedal, settings automatically adjust back to the settings used by the most recent driver profile (or based on the key
if it's linked to a driver profile).
To use Easy Entry with a driver profile, ensure the Use Easy Entry box is checked.
WARNING: Never use Easy Entry to move the driver's seat to the full rearward position when a child safety seat is
installed on a rear seat located behind the driver's seat. With reduced clearance, the movement of the seat may impact a
child's legs, cause injury, or dislodge the seat.
NOTE: You can also make it easier to enter or exit Cybertruck by enabling Auto Lower. For more information, see Auto Lower
on page 298.

45

Owner's Manual

Owners Manual
Valet Mode
When Cybertruck is in Valet mode, the following restrictions apply:
• Key card must be used to access and drive Cybertruck.
• Speed is limited to 70 mph (113 km/h).
• Maximum acceleration and power are limited.
• Front trunk and glovebox are locked.
• Home and Work locations are not available in the navigation system.
• Voice commands are disabled.
• Cruise control is disabled.
• Autopilot convenience features are disabled.
• The Allow Mobile Access setting cannot be changed.
• Driver Profiles are not accessible.
• Some apps, such as Toybox and Theater, are not accessible.
• The touchscreen does not display the list of keys that can access Cybertruck (see Managing Keys on page 207).
• Wi-Fi and Bluetooth are disabled. When Cybertruck is in Valet mode, you cannot pair new Bluetooth devices or view or
delete existing paired devices. However, if a Bluetooth-paired device or a known Wi-Fi network is within range, Cybertruck
connects to it.
Starting Valet Mode

With Cybertruck in Park, touch the driver profile icon at the top of the Controls screen, then touch Valet Mode.
The first time you enter Valet mode, the touchscreen prompts you to create a 4-digit PIN you will use to cancel Valet mode.
When Valet mode is active, the touchscreen displays the word Valet while the driver profile changes to Valet Mode on the
touchscreen.
You can also use the mobile app to start and cancel Valet mode (if Cybertruck is in Park). When using the mobile app, you do
not need to enter a PIN because you are already required to log into the app using your Tesla Account credentials.
NOTE: If PIN to Drive is enabled (see PIN to Drive on page 82), you must enter the driving PIN before you can define or enter
a Valet PIN. Once in Valet mode, Cybertruck can be driven without the valet needing to enter the driving PIN.
NOTE: The PIN to Drive setting is not available when Valet mode is active.
If you forget your valet PIN, reset it from inside Cybertruck by entering your Tesla Account credentials (which also cancels
Valet mode). You can also reset your PIN using the mobile app.
WARNING: Do not use Valet mode when towing a trailer. The torque limitations of Valet mode can make it difficult for
Cybertruck to pull a trailer up a hill.
Canceling Valet Mode

With Cybertruck in Park, touch the Valet Mode driver profile icon at the top of the Controls screen, and enter your 4-digit PIN.
When you cancel Valet mode, all settings associated with the most recently used driver profile and climate control settings are
restored, and all features are available.
NOTE: You do not need to enter a PIN to cancel Valet mode from the mobile app.

Owner's Manual

46

Owners Manual
Trip Information
Displaying Trip Information
Trip information displays on the touchscreen in the "Cards" area on the vehicle status display, or when you touch Controls >
Trips. For the current trip, you can display distance, duration and average energy usage. You can also show distance and total
and average energy used since your last charge and for additional trips.
To name or rename a trip, touch the trip's name, enter a new name for the trip, then press Save. To reset a particular trip meter,
touch its associated Reset button.
Odometer
To display the odometer and view vehicle mileage, do either of the following:
• Touch Controls > Software.
• Touch Controls > Trips.
• Open the mobile app and scroll down to the bottom of the main screen.

47

Owner's Manual

Owners Manual
Rear Facing Camera(s)
Camera Location
Cybertruck is equipped with a rear view camera located above the rear license plate.
Whenever you shift into Reverse, the touchscreen displays the view from the camera. Lines show your driving path based on
the position of the steering wheel. These lines adjust as you move the steering wheel.
Cybertruck also displays images from the side cameras. Simply swipe up or down to hide or show the side camera views.
NOTE: Visual feedback from Park Assist also appears on the (see Park Assist on page 41).
To display the view from the rear view cameras at any time, open the app launcher and touch the Camera app.

If a black screen appears on the touchscreen instead of the rear view camera feed when in Reverse, use the rear view mirrors
and ensure your surroundings are safe before continuing to Reverse. If inoperability of the rear view camera persists, use the
mobile app to schedule a service appointment.
WARNING: Never depend on the cameracameras to inform you if the area behind you is free of objects and/or people.
The cameracameras may not detect objects or barriers that can potentially cause damage or injury. In addition, several
external factors can reduce the performance of the cameracameras, including a dirty or obstructed lens. Therefore,
depending on the cameracameras to determine if Cybertruck is approaching an obstruction can result in damage to the
vehicle and/or objects and can potentially cause serious injury. Always inspect the area with your own eyes. When
reversing, perform shoulder checks and use all mirrors. Use the cameracameras for guidance purposes only. It is not
intended to replace your own direct visual checks and is not a substitute for careful driving.
To ensure a clear picture, the camera lens must be clean and free of obstructions. See Cleaning on page 131.

Owner's Manual

48

Owners Manual
Pedestrian Warning System
The Pedestrian Warning System causes Cybertruck to emit sound when driving below approximately 25 mph (40 km/h) or
while driving in reverse. Electric vehicles operate quietly and this sound helps to alert pedestrians of your oncoming vehicle.
The sound, which activates whenever Cybertruck is shifted out of Park, gets louder as speed increases.
WARNING: If sound cannot be heard, pedestrians may not be aware of your oncoming vehicle, which may increase the
likelihood of a collision resulting in serious injury or death. Never rely on the Pedestrian Warning System to make sure
that pedestrians are aware of your vehicle. If the Pedestrian Warning System is not operating, schedule a service
appointment.

Autopilot
About Autopilot
Autopilot is a suite of advanced driver assistance features that are intended to make driving safer and less stressful. None of
these features make Cybertruck fully autonomous or replace you as the driver. Autopilot features come standard with all new
Tesla vehicles.
Basic Autopilot includes Traffic-Aware Cruise Control and Autosteer.
• Traffic-Aware Cruise Control: Maintains your speed and an adjustable following distance from the vehicle in front of you, if
there is one (see Traffic-Aware Cruise Control on page 331).
• Autosteer: Maintains your speed and distance from a leading vehicle while also intelligently keeping Cybertruck in its lane
(see Autosteer on page 332).
WARNING: Basic Autopilot is a hands-on feature. Keep your hands on the steering wheel at all times and be mindful of
road conditions, surrounding traffic, and other road users (such as pedestrians and cyclists). Always be prepared to take
immediate action. Failure to follow these instructions could cause damage, serious injury, or death.
Enhanced Autopilot includes additional features. Enhanced Autopilot Features are designed to further reduce driver workload
and make common actions, such as changing lanes or parking, easier.
• Auto Lane Change: Moves Cybertruck into an adjacent lane when you engage the turn signal and Autosteer is active (see
Auto Lane Change on page 333).
• Navigate on Autopilot: Actively guides Cybertruck from a highway’s on-ramp to off-ramp, including performing lane
changes, navigating interchanges, automatically engaging the turn signal, and taking the correct exit (see Navigate on
Autopilot on page 333).
• Autopark: Parks Cybertruck, either parallel or perpendicularly (see #unique_183 on page ).
• Summon: Moves Cybertruck forward or backward, even while you’re outside the vehicle. This is useful for parking in tight
parking spots (see #unique_184 on page ).
• Smart Summon: Moves Cybertruck out of a parking space and through more complex environments, maneuvering around
obstacles and other vehicles, to meet you or go to a predetermined target (see #unique_185 on page ).
WARNING: Enhanced Autopilot is a hands-on feature. Keep your hands on the steering wheel at all times and be mindful
of road conditions, surrounding traffic, and other road users (such as pedestrians and cyclists). Always be prepared to