NHTSA ID Number: 11006148
Manufacturer Communication Number: T-SB-0060-24
TSB/Document Date: 2024-08-08
Summary
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: • Careful inspection for paint chips/scratches and body dents/dings. • Proper operation of electrical accessories (including interior light, clock, and radio reset). • Interior cleanliness. • Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of “Final Inspection and Cleaning.”) This bulletin contains the PDS procedures that apply specifically to 2025 model year Supra vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0023-24, Long-Term Vehicle Storage Guidelines.
7. Menu display: “Delete transport mode and then carry out the pre-delivery check?”
Select Yes, then click Continue.
Figure 4.
8. If the screen below appears, ignore it and click Continue.
If this screen does NOT appear, continue to step 9.
Figure 5.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 10 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
9. Menu display: “Enter the currently valid phone number for the responsible (country-specific)
breakdown assistance.”
Enter the appropriate roadside assistance phone number according to the table below, then
click Continue.
NOTE
• Phone number entry is only required once. If the ISTA software being used has been previously
used to complete PDS, go to step 12.
• Do NOT input dashes with phone numbers.
REGION
ROADSIDE ASSISTANCE PHONE NUMBER
Continental
United States of America
1-800-331-4331
Hawaii
1-877-525-1778
Puerto Rico
1-800-981-8166
Mexico
1-800-786-9682
Figure 6.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 11 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
10. Menu display: “Enter the currently valid phone number for the responsible Technical Support
department (country-specific).”
Enter the appropriate customer support phone number according to the table below, then
click Continue.
NOTE
• Phone number entry is only required once. If the ISTA software being used has been used to
complete PDS previously, go to step 12.
• Do NOT input dashes with phone numbers.
REGION
CUSTOMER SUPPORT PHONE NUMBER
Continental United States of America
1-800-331-4331
Hawaii
1-888-272-5515
Puerto Rico
1-877-855-8377
Mexico
1-800-786-9682
Figure 7.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 12 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
11. Menu display: “Enter the currently valid phone number for the dealer. If there are several
telephone numbers in the premises, use the telephone number used in the service section.”
Enter the service department phone number for your dealership, then click Continue.
NOTE
Phone number entry is only required once. If the ISTA software being used has been used to
complete PDS previously, go to step 13.
Figure 8.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 13 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
12. Ensure that statutory exhaust-gas test is deactivated, then click Continue.
If statutory exhaust-gas test is activated, select Yes to deactivate, then click Continue.
NOTE
Statutory exhaust-gas test display preference entry is only required once. If the ISTA software being
used has been used to complete PDS previously, continue to step 13.
Figure 9.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 14 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
13. Confirm the phone numbers for breakdown assistance (roadside assistance), technical
support (Customer Experience Center/customer support), and dealer (service department).
Select Enter phone numbers in the vehicle and click Continue.
NOTE
If a phone number needs to be edited, select the box next to the number that needs to be edited
and click Continue.
Figure 10.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 15 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
14. Menu display: “The online services will be updated in the following procedure.”
Click Continue.
Figure 11.
NOTE
• If updating online services fails, the menu will display “Currently, there is no connection to the
ConnectedDrive Server or there is a problem with the user account in the
ConnectedDrive portal.”
• If this message is displayed, select “Confirm the note and continue with the procedure.” and
“Continue (Next).”
• AFTER the transport mode deletion procedure is complete, use the multi-display and perform the
following steps to update the online services:
• AFTER selecting “Connected Serv.,” press the OPTION button on the controller.
• Select “Update Toyota Supra Services.”
• For the “Transferring data” message, select “OK” and for the “Data transfer successful”
message, select “OK.”
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 16 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
15. Once the head unit and telematics control unit service updates are complete, click Continue.
Figure 12.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 17 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
16. Maps should update automatically if the license key has been received.
Once map activation is complete, click Continue.
NOTE
• Following successful map activation, maps will become available AFTER the vehicle has been
powered OFF for AT LEAST three minutes. This can be done AFTER the completion of this
entire procedure.
• If activating navigation maps fails, the menu display, "No activation code could be found in the
database" will appear.
• Select "DIAGCODE: D6590_SWT00000_99_###" and "Continue (Next)."
• For activation to be successful, the following conditions MUST be met:
• License Key Order Status (Is the current date and time later than that listed in the
received email?)
• Network Connection (Is it possible to connect to https://api-ext.ista-ws.toyota.com?)
• If the cause of the failure was resolved, select "Automatic enabling, not in offline operation" and
"Continue (Next)."
• If the cause of failure could not be resolved, or if there is another issue, select "Continue without
enabling" and "Continue (Next)."
• To complete map activation at a later time, use ISTA and enter the following menus: Vehicle
management – Service functions – Maintenance and pre-delivery check – Enabling navigation
map – Automatic enabling – ABL Automatically enabling the navigation – Display, and perform
the navigation map activation.
Figure 13.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 18 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
17. Menu display: “The steering angle sensor is not initialised!”
Click Continue to initialize.
Figure 14.
18. Menu display: “Electrical steering assistance is now activated.”
Follow the directions on the screen, then click Continue once initialization is complete.
Figure 15.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 19 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
19. Menu display: “Charge status of 12V battery.”
Click Continue.
NOTICE
• Connect the battery diagnostic tool to the under-hood jump starting posts
(do NOT connect directly to the battery).
• Do NOT charge at a voltage of more than 14.8V at room temperature
(NO RAPID CHARGING).
NOTE
• If the battery State-Of-Charge (SOC) is less than 70%, charge the battery with the DCA-8000
battery diagnostic tool using the Manual Charge option. The Transport Mode Deletion Procedure
CANNOT be completed if the battery drops below 70% SOC.
• Refer to the DCA-8000 Instruction Manual for complete battery charging procedures.
Figure 16.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 20 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
20. Fault memories should clear automatically. Once complete, review the pre-delivery check
status list, then click Continue.
Figure 17.
21. Menu display: “Service function finished.”
Click Continue.
Figure 18.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 21 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
22. Transport mode deletion is complete.
The Transport mode indicator in the combination meter should now be OFF.
23. Turn the vehicle OFF by pressing the Start-Stop button (engine switch) once, then hold the
power button on the head unit until the vehicle powers down.
24. To close the operation in ISTA, enter the following menus: Operations – Active –
Operation List. Select the VIN and click Close operation.
Figure 19.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
25. When the Close operation window appears, click OK.
Figure 20.
26. Disconnect the DLC3 connector from the vehicle and close ISTA.
© 2024 Toyota Motor Sales, USA
Page 22 of 32
T-SB-0060-24
July 11, 2024
Page 23 of 32
2025 Supra Pre-Delivery Service (PDS)
Spring Spacer Removal
Two spring spacers are installed on EACH front shock absorber to prevent the front bumper from
being damaged in transit. Remove the four spring spacers during PDS.
NOTE
Three spring spacers are installed on EACH front shock for Carbon Fiber Special Edition models for a
total of six.
Figure 21.
1
2
1
2
Spring Spacer Location
Spring Spacer (Two Per Side, Three Per Side
for Carbon Fiber Special Edition Models)
1. Lift the vehicle to extend the front suspension.
Refer to TIS, applicable model and model year Repair Manual:
•
2025 Supra:
General – Introduction – Repair Instruction – Vehicle Lift and Support Locations
2. Disengage the lower end of the dust cover
and push the dust cover upward.
Figure 22.
1
1
© 2024 Toyota Motor Sales, USA
Dust Cover
T-SB-0060-24
July 11, 2024
Page 24 of 32
2025 Supra Pre-Delivery Service (PDS)
Spring Spacer Removal (continued)
3. Disengage the spring spacers and spread
the openings as shown.
Figure 23.
1
1
4. Remove the two spring spacers from the
shock absorber.
Spring Spacers
- Seamless Bluetooth Connectivity: Car stereo with Bluetooth...
- Powerful, Clear Audio Performance: Equipped with a built-in...
- High-Quality Music Playback via USB: Enjoy clear, detailed...
- Compact 1-DIN Design: Single din radio is designed with a...
- Simple Sound Customization: Dedicated Direct EQ Keys let you...
- 【High Quality Car Stereo Player】- Our double din car...
- 【Double Din Car Stereo Phone Mirror Link】- Support...
- 【7 inch Double Din Car Radio With Bluetooth 5.0 and FM...
- 【Car Stereo Double Din Inputs】- USB /SD/AUX input. car...
- 【Standard Double Din Stereo with Backup Camera】- Parking...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0060-24
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-11
MFR Internal Campaign ID/Software Version: T-SB-0060-24
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.