NHTSA ID Number: 11006148
Manufacturer Communication Number: T-SB-0060-24
TSB/Document Date: 2024-08-08
Summary
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: • Careful inspection for paint chips/scratches and body dents/dings. • Proper operation of electrical accessories (including interior light, clock, and radio reset). • Interior cleanliness. • Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of “Final Inspection and Cleaning.”) This bulletin contains the PDS procedures that apply specifically to 2025 model year Supra vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0023-24, Long-Term Vehicle Storage Guidelines.
T-SB-0060-24
July 11, 2024
2025 Supra Pre-Delivery Service (PDS)
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2025
Supra
ADDITIONAL INFORMATION
Introduction
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer
feedback indicates the following areas deserve special attention when performing PDS:
•
•
•
•
Careful inspection for paint chips/scratches and body dents/dings.
Proper operation of electrical accessories (including interior light, clock, and radio reset).
Interior cleanliness.
Proper function of mechanical systems.
Customer retention and proper maintenance of vehicles are and have always been a major focus
for Toyota
. To help remind customers that regular service is essential to the proper maintenance
of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing
this, customers will be reminded to return to your dealership for service. Your current service
reminder sticker may be used. (See PDS Check Sheet item 8 of “Final Inspection and Cleaning.”)
This bulletin contains the PDS procedures that apply specifically to 2025 model year
Supra vehicles.
Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025
model year Toyota vehicles. To properly perform a complete PDS, you must complete all
procedures contained in this TSB as well as the universal PDS Check Sheet.
In addition, if the vehicle is stored for over 30 days, refer to T-SB-0023-24, Long-Term Vehicle
Storage Guidelines.
© 2024 Toyota Motor Sales, USA
Page 1 of 32
T-SB-0060-24
July 11, 2024
Page 2 of 32
2025 Supra Pre-Delivery Service (PDS)
Introduction (continued)
NOTICE
• It is CRITICAL to install the latest version of Toyota ISTA on the Techstream ADVi. Your current
ISTA version may NOT be sufficient for this PDS.
• As the software versions of vehicles and parts are updated daily, using an older version of ISTA
may cause problems such as inability to identify the vehicle, inability to reprogram, etc., which
may result in failure to release the transport mode properly.
• The MINIMUM ISTA version required for this PDS is: 4.46.44.27538.
• Versions of ISTA higher than 4.46.44.27538 are also acceptable. As a best practice you should
ALWAYS install the latest version of ISTA when performing this PDS. (The latest version of
ISTA can be found at the bottom left of the TIS Diagnostics Scantool page).
NOTE
To perform navigation map activation during the transport mode deletion procedure, the following items
MUST be completed in advance. Refer to the Ordering License Key section of this bulletin for more details.
• Dealer user registration on www.supramapactivation.com.
• License key order placed and completed (1 – 3 day process).
Table of Contents
•
Warranty Policy ........................................................................................................................ 3
•
Warranty Information ................................................................................................................ 3
•
Required Tools & Equipment .................................................................................................... 3
•
Preparation for Map Activation ................................................................................................. 4
•
Dealer User Registration..................................................................................................... 4
•
Ordering License Key ......................................................................................................... 4
•
Transport Mode Deletion Procedure ......................................................................................... 5
•
Spring Spacer Removal .......................................................................................................... 23
•
Tire Pressure Warning System (TPWS) Initialization .............................................................. 25
•
Emergency Towing Eyelet Removal and Eyelet Hole Cover Installation*................................ 26
•
Front License Plate and Mounting Bracket Installation* .......................................................... 29
•
Rear License Plate and Mounting Bracket Installation ............................................................ 32
*If applicable.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 3 of 32
2025 Supra Pre-Delivery Service (PDS)
Warranty Policy
If the need for additional repairs or adjustment is noted during PDS, the required service should
be performed under warranty. Reimbursement will be managed under the warranty policy.
The Warranty Policy and Procedures Manual requires that you maintain the completed
Check Sheet in the customer’s file. If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject
to debit.
An additional Repair Order completed in conjunction with normal PDS MUST have time
punch/flags for service. If multiple repairs are performed, separate time flags MUST be punched
for each repair.
Warranty Information
OP CODE
DESCRIPTION
MODEL
TIME
OFP
T1
T2
001013
Pre-Delivery Service (PDS)
Supra
1.5
–
–
–
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
Supra Diagnostic Cable*
01018-00118
1
DCA-8000 Battery Diagnostic Tool*
DCA-8000P T
1
*Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335 or by visiting
Home – Service Resources – Toyota Special Service Tools (SSTs).
REQUIRED EQUIPMENT
SUPPLIER
PART NUMBER
QTY
Techstream ADVi*
TSADVUNIT
1
*Essential SST.
NOTE
• Supra Diagnostic Software Toyota ISTA version 4.46.44.27538 or later is required. ISTA software is
available for download at: TIS – Diagnostics – Scantool.
• GTS+ software version 2024.02.004.02 or later is required.
• Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at
1-800-368-6787 or by visiting TIS – Diagnostics – Tools & Equipment – Techstream Order Portal.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 4 of 32
2025 Supra Pre-Delivery Service (PDS)
Preparation for Map Activation
In order to perform navigation map activation (procedures for start-of-use) during the transport
mode deletion procedure, it is necessary to order a license key in advance. Determine the
pre-delivery work schedule in coordination with the sales staff and perform the Dealer User
Registration and Ordering License Key procedures described below.
Dealer User Registration
Navigate to www.supramapactivation.com and complete dealer user registration.
NOTE
User registration only needs to be completed once. If already registered, continue to the Ordering
License Key section of this bulletin. Refer to the Map Activation Order Request Guide for complete
registration instructions.
Ordering License Key
Navigate to www.supramapactivation.com and order a license key.
NOTE
• Refer to the Map Activation Order Request Guide for complete ordering instructions.
• To place the order, enter the vehicle’s VIN and select the applicable country.
• Orders can be submitted 24 hours a day, but order processing times are limited. Therefore, orders
need to be placed in advance according to the schedule for PDS.
• Time from order placement until order completion:
From same day to a maximum of three days (no processing on weekends).
• If an order is placed just before a scheduled order processing time, the order may be processed at
the next scheduled order processing time.
• Order processing times (Central European Time):
Monday – Friday, 9:45 a.m., 12:00 p.m., 3:00 p.m., 9:00 p.m.
• Orders are processed in Europe and will therefore follow European daylight savings (summer) time.
The European daylight savings time schedule differs from the USA schedule.
• After the order has been received, an email will be sent to the address provided during user
registration to notify of the time at which processing is expected to be completed.
• As long as ISTA is connected to the internet, the ordered license key will automatically populate in
ISTA during the navigation map activation procedure. (No physical object will be sent to the dealer.)
• Activation MUST be completed within 30 days of the license key order.
If activation is NOT completed within 30 days of the license key order, the license key will expire, and
it will be necessary to order a NEW license key.
• The four-year free update period is calculated from the completion of the license key order, NOT from
the activation timing.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 5 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure
Transport mode disables various electrical functions while the vehicle is being shipped to help
prevent the vehicle battery from being drained. While in transport mode, the “Transport Mode
Indicator” is displayed on the combination meter. The indicator will turn off after transport mode is
deleted. Follow these steps to delete transport mode using the Supra diagnostic
application (ISTA).
NOTICE
• It is CRITICAL to install the latest version of Toyota ISTA on the Techstream ADVi. Your
current ISTA version may NOT be sufficient for this PDS.
• As the software versions of vehicles and parts are updated daily, using an older version of
ISTA may cause problems such as inability to identify the vehicle, inability to reprogram, etc.,
which may result in failure to release the transport mode properly.
• The MINIMUM ISTA version required for this PDS is: 4.46.44.27538.
• Versions of ISTA higher than 4.46.44.27538 are also acceptable. As a best practice you should
ALWAYS install the latest version of ISTA when performing this PDS. (The latest version of
ISTA can be found at the bottom left of the TIS Diagnostics Scantool page).
• In the procedure below, the language setting in ISTA is British English (en-GB), which is the
default setting. If you have changed the language setting to English for the United States
(en-US), you may see different terminology within ISTA (e.g., Operations – Cases).
• Transport mode deletion procedure screen flows and content may vary depending on the
ISTA version.
• To perform the transport mode deletion procedure, it is necessary to connect to the Internet.
1. Connect the DCA-8000 battery charger to the vehicle.
NOTE
•
•
•
•
When deleting transport mode, keep the battery charger connected throughout the procedure
and make sure the battery voltage remains at 12.3V or higher. If the voltage decreases below
12.3V, a message may be displayed on the ISTA screen instructing the technician to connect
the battery charger.
When AGM batteries are charging, the maximum charging voltage of 14.8V at room temperature
must NOT be exceeded. Do NOT use rapid-charging programs.
When charging, use the jump-starting terminals located under the hood.
When the vehicle is stored for a long period of time, charge the battery to 12.9V every six weeks.
2. While connected to Wi-Fi, connect Techstream ADVi to the DLC3 port using the Supra
diagnostic cable.
NOTE
Check that the date and time on the PC are correct.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 6 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
3. Press the Start-Stop button (engine switch) three times within 0.8 seconds to enter
Diagnostics (PAD) Mode.
4. Launch ISTA software, enter the following menus: Operations (Cases) – New –
Read Out Vehicle Data, and click Complete identification (Full Identification).
Figure 1.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 7 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
5. In the Connection manager window, select the VIN and click Set up connection
(Establish connection).
Figure 2.
NOTE
AFTER the connection has been established, fault memory may display. Deleting fault memory is a
procedure in step 11 and does NOT need to be addressed at this stage.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 8 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
6. Enter the following menus:
Vehicle management – Service functions – Maintenance and pre-delivery check / Transport
mode, pre-delivery check – Transport mode, pre-delivery check – Delete transport mode –
ABL Delete transport mode
Then, click Display.
Figure 3.
© 2024 Toyota Motor Sales, USA
T-SB-0060-24
July 11, 2024
Page 9 of 32
2025 Supra Pre-Delivery Service (PDS)
Transport Mode Deletion Procedure (continued)
- Seamless Bluetooth Connectivity: Car stereo with Bluetooth...
- Powerful, Clear Audio Performance: Equipped with a built-in...
- High-Quality Music Playback via USB: Enjoy clear, detailed...
- Compact 1-DIN Design: Single din radio is designed with a...
- Simple Sound Customization: Dedicated Direct EQ Keys let you...
- 【High Quality Car Stereo Player】- Our double din car...
- 【Double Din Car Stereo Phone Mirror Link】- Support...
- 【7 inch Double Din Car Radio With Bluetooth 5.0 and FM...
- 【Car Stereo Double Din Inputs】- USB /SD/AUX input. car...
- 【Standard Double Din Stereo with Backup Camera】- Parking...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0060-24
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-11
MFR Internal Campaign ID/Software Version: T-SB-0060-24
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.