NHTSA ID Number: 11005978
Manufacturer Communication Number: A9324982062631_5
TSB/Document Date: 2024-08-06
Summary
This bulletihn provides information when various ghost DTCs, B200000, P0CA400, P33E300, U15BF00 and/or U112100 are stored in the HV battery charger ECU.
Technical Service Bulletin
93 Various ghost DTCs, B200000, P0CA400, P33E300, U15BF00 and/or U112100 are stored in the HV
battery charger ECU
93 24 98 2062631/5 July 31, 2024. Supersedes Technical Service Bulletin Group 93 number 23-13 dated May 30,
2023 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
e-tron, and e-tron
2021 – 2023
Sportback
Q8 e-tron, SQ8
e-tron, Q8 e-tron
Sportback, and
SQ8 e-tron
Sportback
2024
Condition
REVISION HISTORY
Revision Date
Purpose
5
-
Revised Condition (Added Battery Charger 2 information)
4
05/30/2023 Revised header (Added Q8 e-tron and Q8 e-tron Sportback)
Revised Condition (Added Battery Charger 2 information)
3
08/16/2022 Revised Condition (Added Static or Sporadic to DTCs for software level 0081 and
0088)
Customer states:
No customer concerns, it is found during PDI or any other diagnostic work.
Workshop findings:
The following DTCs with symptom code may be stored in the high-voltage battery
charger control module, J1050
(address word 00C6/8113):
Vehicles with Software 0079 installed in J1050 (address word 00C6)
Diagnostic
address
00C6 / 8113
DTC
B1A8AF0 Charge door 1 LIN actuator, path of movement fault
3211268
B194B13 Charge flap 2 search illumination – open circuit
3211295
B200000 Control module faulty
1049088
P0CA400 Hybrid
/High voltage battery
load voltage too high
14745862
© 2024 Audi
of America, Inc.
Internal
Symptom
Code
Designation
Page 1 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
P1A1500 Charging unit 2 function restriction
14746766
P31D100 Charge socket A temperature sensor electrical error
14750742
P33E300 Charge socket A, communication error
2097664
P178E00 Function restriction due to excessive temperature
14750734
U15AC00 Signal damping log malfunction
3280913
U15B500
Quick battery charging (DC) – Charging station not
active
2097301
3276840
U15BF00 Intelligent charging function – faulty communication
3276846
3276852
U15C900 Safety module (FuSi) function intervention
13709330
13705477
13705501
U112100 Data bus missing message
13705524
13705553
13706243
Vehicles with Software 0081 installed in J1050 (address word 00C6)
Diagnostic
address
DTC
Designation
Symptom Code
P0CA400
Hybrid
/High voltage battery
load
voltage too high
14745862
13705524
U112100 Data bus missing message
Static /
Sporadic
Both
Both
13705553
13706243
13705484
00C6 / 8113
U15B500 Quick battery charging (DC)
2097301
Sporadic
B200000 Control module faulty
1049088
Both
B194B13
Charge flap 2 search illumination Open
3211295
circuit
Sporadic
B192E13
Charge flap 1 search illumination Open
3211292
circuit
Both
© 2024 Audi of America, Inc.
Internal
Page 2 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
U15BF00
Intelligent charging function Faulty
communication
3276840 3276846
3276852
P178E00
Function restriction due to excessive
temperature
14750734
Both
Sporadic
P33E300 Charging socket A Communication fault 2097664
Sporadic
P31D100
Charging socket A temperature sensor
Electrical malfunction
14750742
Sporadic
U15C900
Security module (FuSi) function
intervention
13709330
U15AC00 Signal damping log malfunction
B1A8AF0
Charge door 1 LIN actuator, Path of
movement fault
3280913
3211268
Both
Both
Both
Vehicles with Software 0088 installed in J1050 (address word 00C6) or J1239 (address word 8113)
Diagnostic
address
DTC
Designation
P0D2800 Battery charger Primary voltage too high
Static /
Sporadic
14746125
Both
P33E500
Quick battery charging (DC) Charge station
2097287
initialization error
Sporadic
U15AD00
Quick battery charging (DC) Charging
station incompatible
Both
C116300 Development functions active
2097292
14753057
P0CA400
Hybrid
/High voltage battery
load voltage
too high
14745862
U15B500
Quick battery charging (DC) Charging
station not active
2097301
00C6 / 8113
B200000 Control module faulty
U15BF00
Intelligent charging function Faulty
communication
U15AC00 Signal damping log Fault
© 2024 Audi of America, Inc.
Internal
Symptom
Code
1049088
Both
Both
Both
Sporadic
3276816
3276840
3280899
Both
Both
3280913
Page 3 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Technical Background 1
Diagnosis issue in the software of the high-voltage battery
charger control module, J1050 (address word 00C6).
Production Solution
Not applicable.
Service
The DTCs listed above stored in the high-voltage battery
charger control module, J1050 (address word 00C6) are
entered erroneously and can be ignored (so-called ghost DTCs).
If there is a customer concern regarding charging, this TSB does not apply, and the vehicle must be
repaired following Guided Fault Finding.
Do not perform any repairs. Any repairs or part replacements for this concern may be denied.
This condition is normal.
Warranty
This TSB is informational only and not applicable to any Audi Warranty.
Additional Information
All part and service references provided in this TSB (2062631) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2024 Audi
of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi
of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
© 2024 Audi
of America, Inc.
Internal
Page 4 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi
of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A9324982062631_5
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-31
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




