NHTSA ID Number: 11005740
Manufacturer Communication Number: 2024.26_0624.pdf
TSB/Document Date: 2024-08-06
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
Owner's Manual
2. Lower one tower (edge of the crossbar) onto the bracket and extend the crossbar so that the other tower aligns with the
bracket on the opposite side.
3. Use the key to open the tower doors. Push down to seat both towers.
Owner's Manual
1271
4. Once the towers are completely seated, close the tower doors securely using the key. You will hear and feel a “click” when
the tower door is closed completely. If there is resistance to closing or if the door physically cannot be closed, the tower
door is not seated properly. Turn the key to open the door, re-position, and use the key to close to door again.
5. Repeat this on the other side of the crossbar.
6. Repeat steps 1-5 to install your second crossbar directly in front of or behind the first one.
7. To test the secure installation of the crossbars, push and pull them in all directions. If any movement is observed at any of
the four towers, re-seat the affected crossbars, then retest the installation.
1272
Owner's Manual
Towing
NOTE: Keep the key in a dry, safe area for future use.
Weight limits
The crossbars are capable of supporting up to 220 lbs per crossbar set. See the in-box instructions that come with the
crossbars for more information.
Owner's Manual
1273
Autopilot
About Autopilot
Autopilot is a suite of advanced driver assistance features that are intended to make driving safer and less stressful. None of
these features make CybertruckModel SModel XModel 3Model Y fully autonomous or replace you as the driver. Autopilot
features come standard with all new Tesla vehicles.
Basic Autopilot includes Traffic-Aware Cruise Control and Autosteer.
• Traffic-Aware Cruise Control: Maintains your speed and an adjustable following distance from the vehicle in front of you, if
there is one (see Traffic-Aware Cruise Control on page 553Traffic-Aware Cruise Control on page 575).
• Autosteer: Maintains your speed and distance from a leading vehicle while also intelligently keeping
CybertruckModel SModel XModel 3Model Y in its lane (see Autosteer on page 554Autosteer on page 586).
WARNING: Basic Autopilot is a hands-on feature. Keep your hands on the steering wheelsteering yoke (or steering
wheel) at all times and be mindful of road conditions, surrounding traffic, and other road users (such as pedestrians and
cyclists). Always be prepared to take immediate action. Failure to follow these instructions could cause damage, serious
injury, or death.
Enhanced Autopilot includes additional features. Enhanced Autopilot Features are designed to further reduce driver workload
and make common actions, such as changing lanes or parking, easier.
• Auto Lane Change: Moves CybertruckModel SModel XModel 3Model Y into an adjacent lane when you engage the turn
signal and Autosteer is active (see Auto Lane Change on page 558Auto Lane Change on page 589).
• Navigate on Autopilot: Actively guides CybertruckModel SModel XModel 3Model Y from a highway’s on-ramp to off-ramp,
including performing lane changes, navigating interchanges, automatically engaging the turn signal, and taking the correct
exit (see Navigate on Autopilot on page 560Navigate on Autopilot on page 592).
• Autopark: Parks CybertruckModel SModel XModel 3Model Y, either parallel or perpendicularly (see Autopark on page
614Autopark on page 609).
• Summon: Moves CybertruckModel SModel XModel 3Model Y forward or backward, even while you’re outside the vehicle.
This is useful for parking in tight parking spots (see Summon on page 617Summon on page 624).
• Smart Summon: Moves CybertruckModel SModel XModel 3Model Y out of a parking space and through more complex
environments, maneuvering around obstacles and other vehicles, to meet you or go to a predetermined target (see Smart
Summon on page 621Smart Summon on page 628).
WARNING: Enhanced Autopilot is a hands-on feature. Keep your hands on the steering wheel at all times and be mindful
of road conditions, surrounding traffic, and other road users (such as pedestrians and cyclists). Always be prepared to
take immediate action. Failure to follow these instructions could cause damage, serious injury or death.
Full Self-Driving Capability includes:
• Traffic Light & Stop Sign Control: Maintains your speed, keeps a following distance, and keeps
CybertruckModel SModel XModel 3Model Y in its lane while also slowing down and stopping for traffic lights and stop
signs (see Traffic Light and Stop Sign Control on page 597).
• Autosteer on City Streets (Full Self-Driving (Supervised)): Attempts to drive to your destination by following curves in the
road; stopping at and negotiating intersections, stop signs, and roundabouts; making left and right turns; and entering/
exiting highways (see Full Self-Driving (Supervised) on page 603#unique_681 on page ).
WARNING: Full Self-Driving Capability is a hands-on feature. Keep your hands on the steering wheel at all times and be
mindful of road conditions, surrounding traffic, and other road users (such as pedestrians and cyclists). Pay attention to
the road at all times and always be prepared to take immediate action. Failure to follow these instructions could cause
damage, serious injury or death.
Autopilot uses the cameras on CybertruckModel SModel XModel 3Model Y, which monitor the surrounding area and detect
other vehicles, pedestrians, road markings, and obstacles such as barriers and curbs. There are cameras mounted on the
front, rear, left, and right sides of CybertruckModel SModel XModel 3Model Y (see Cameras on page 101Cameras on page
1138).
1274
Owner's Manual
Autopilot
CybertruckModel SModel XModel 3Model Y may also be equipped with a cabin camera, mounted in the rear-view mirror, that
monitors driver attentiveness. It is your responsibility to keep your hands on the wheel, pay attention to the road, and be ready
to take immediate action at any time.
When Autopilot is engaged, CybertruckModel SModel XModel 3Model Y shows a series of escalating warnings reminding you
to keep your hands on the wheel and pay attention to the road. If there is no response, Autopilot disengages and is unavailable
for the remainder of the drive.
WARNING: Autopilot is designed for your driving comfort and convenience and is not a collision warning or avoidance
system. It is your responsibility to stay alert, drive safely, and be in control of the vehicle at all times. Never depend on
Autopilot to adequately slow down CybertruckModel SModel XModel 3Model Y. Always watch the road in front of you
and be prepared to take corrective action at all times. Failure to do so can result in serious injury or death.
It is your responsibility to familiarize yourself with the limitations of Autopilot and be ready to take control at all times. For more
limitations, cautions, and warnings, see Limitations and Warnings on page 631.
Owner's Manual
1275
Autopilot
Autopilot Conditions
Ensure all cameras are clean and free of obstructions before each drive and before using Autopilot features (see Cleaning a
Camera on page 781Cleaning a Camera on page 781Cleaning a Camera on page 781Cleaning a Camera on page 782Cleaning a
Camera on page 1142). Dirty cameras and sensors (if equipped), as well as environmental conditions such as rain and faded
lane markings, can affect Autopilot performance. If a camera is obstructed or blinded, CybertruckModel SModel XModel
3Model Y displays a message on the instrument clustertouchscreen and Autopilot features may not be available. For more
information on specific alerts, see Troubleshooting Alerts on page 954Troubleshooting Alerts on page 1011.
Before you can use Autopilot features, and after some Service visits, you must drive a short distance to calibrate cameras. For
more information, see Drive to Calibrate Cameras on page 108Drive to Calibrate Cameras on page 1142.
In addition, these features may not work as intended when:
• The road has sharp curves or significant changes in elevation.
• Road signs and signals are unclear, ambiguous, or poorly maintained.
• Visibility is poor (due to heavy rain, snow, hail, etc. or poorly lit roadways at night)
• You are driving in a tunnel or next to a highway divider that interferes with the view of the camera(s)
• Bright light (such as from oncoming headlights or direct sunlight) interferes with the view of the camera(s).
The list above does not represent an exhaustive list of situations that may interfere with proper operation of Autopilot features.
For more information, see Limitations and Warnings on page 631.
Autopilot
Feature
Traffic-Aware
Cruise Control
Available When
• You are driving between 18 mph (30 km/h) and 90 mph (150 km/h)85 mph (140 km/h)
NOTE: You can activate Traffic-Aware Cruise Control at lower speeds if there is a vehicle detected at
least 5 feet (1.5 meters) ahead of CybertruckModel SModel XModel 3Model Y.
Autosteer
• You are driving between 18 mph (30 km/h) and 90 mph (150 km/h)85 mph (140 km/h)
NOTE: You can activate Autosteer at lower speeds if there is a vehicle detected at least 5 feet (1.5
meters) ahead of CybertruckModel SModel XModel 3Model Y.
NOTE: On a residential road, a road without a center divider, or a road that is not controlled access, the
maximum allowed cruising speed is limited and the instrument paneltouchscreen displays a message.
The restricted speed will be the speed limit of the road plus 5 mph (10 km/h).
• Headlights are set to On or Auto. Although Autopilot is available both during the day and in low light
conditions (dusk or dark), Autosteer aborts or is unavailable if headlights are set to Off. When Autosteer
is engaged, Auto High BeamAdaptive Headlights Auto High Beam is automatically enabled (see High
Beam Headlights on page 436High Beam Headlights on page 435High Beam Headlights on page 437
High Beam Headlights on page 422High Beam Headlights on page 422Headlights on page 1231) and the
wiper iswipers are set to Auto.
Navigate on
Autopilot
• You are driving between 18 mph (30 km/h) and 90 mph (150 km/h)85 mph (140 km/h).
NOTE: You can activate Navigate on Autopilot at lower speeds if there is a vehicle detected at least 5
feet (1.5 meters) ahead of CybertruckModel SModel XModel 3Model Y.
• You are driving on a controlled-access highway. When you leave a controlled-access highway, Navigate
on Autopilot reverts to Autosteer.
1276
Owner's Manual
Autopilot
Autopilot
Feature
Full SelfDriving
(Supervised)
Available When
• You are driving less than 85 mph (150 km/h).
NOTE: You can activate Full Self-Driving (Supervised) at lower speeds, including when
CybertruckModel SModel XModel 3Model Y is at a standstill, whether or not there is a vehicle detected
in front of CybertruckModel SModel XModel 3Model Y.
• Headlights are set to On or Auto. Although Full Self-Driving (Supervised) is available both during the day
and in low light conditions (dusk or dark), it aborts or is unavailable if headlights are set to Off. When Full
Self-Driving (Supervised) is engaged, Auto High Beam is automatically enabled (see High Beam
Headlights on page 436High Beam Headlights on page 435 High Beam Headlights on page 422High
Beam Headlights on page 422Headlights on page 1231) and the wiper iswipers are set to Auto.
Autopilot Features
This topic describes how to enable and use the following driver assistance features.
• Traffic-Aware Cruise Control: Like traditional cruise control, Traffic-Aware Cruise Control maintains a set driving speed.
However, Traffic-Aware Cruise Control also slows down or accelerates CybertruckModel SModel XModel 3Model Y as
needed to maintain the following distance from the vehicle in front of you. While Traffic-Aware Cruise Control is engaged,
you are still responsible for steering CybertruckModel SModel XModel 3Model Y (see Traffic-Aware Cruise Control on
page 553).
• Autosteer: Like Traffic-Aware Cruise Control, Autosteer maintains a set speed (if there is not a vehicle in front of you) or a
set following distance (if there is a vehicle in front of you). In addition, Autosteer detects lane markings, road edges, and
the presence of vehicles and objects to intelligently keep CybertruckModel SModel XModel 3Model Y in its driving lane
(see Autosteer on page 554).
NOTE: Autosteer is a BETA feature.
• Auto Lane Change: When you engage a turn signal while Autosteer is active, Auto Lane Change moves
CybertruckModel SModel XModel 3Model Y into the adjacent lane in the direction indicated by the turn signal (see Auto
Lane Change on page 558).
• Navigate on Autopilot: Navigate on Autopilot builds on the features of Traffic-Aware Cruise Control and Autosteer. While
Autosteer is active, Navigate on Autopilot allows CybertruckModel SModel XModel 3Model Y to suggest and, if
configured, automatically change lanes to pass other vehicles and follow the navigation route (see Navigate on Autopilot on
page 560).
NOTE: Navigate on Autopilot is a BETA feature.
Traffic-Aware Cruise Control and Autosteer use information from the cameras on CybertruckModel SModel XModel 3Model Y
to detect lane markings, road edges, and other vehicles and road users around CybertruckModel SModel XModel 3Model Y.
CAUTION: Ensure all cameras are clean and free of obstructions before each drive and before using Autopilot features
(see Cleaning a Camera on page 781Cleaning a Camera on page 781Cleaning a Camera on page 781Cleaning a Camera
on page 782Cleaning a Camera on page 1142). Dirty cameras and sensors (if equipped), as well as environmental
conditions such as rain and faded lane markings, can affect Autopilot performance. If a camera is obstructed or blinded,
CybertruckModel SModel XModel 3Model Y displays a message on the instrument clustertouchscreen and Autopilot
features may not be available. For more information on specific alerts, see Troubleshooting Alerts on page
954Troubleshooting Alerts on page 1011.
CAUTION: It is your responsibility to familiarize yourself with the limitations of Autopilot and the situations in which
driver intervention may be needed. For more information, see Limitations and Warnings on page 631.
Autopilot Settings
Before you use Autopilot features, customize how they work by touching Controls > Autopilot.
Owner's Manual
1277
Autopilot
• Set Speed: Choose whether Autopilot engages at the currently detected speed limit or your current driving speed. Touch
Controls > Autopilot > Set Speed and choose either Speed Limit or Current Speed.
• Offset: If you choose Speed Limit, you can specify an offset by touching Set Speed Offset. You can choose Fixed (the
cruising speed adjusts by a specific amount on all roads) or Percentage (the cruising speed is adjusted as a percentage of
the road's detected speed limit).
• Autopilot Activation: Choose how to activate Autosteer. If set to Single Click, both Traffic-Aware Cruise Control and
Autosteer engage when you single-press the right scroll wheel. If set to Double Click, you must double-press the right
scroll wheel to engage Autosteer.
NOTE: Autopilot Activation must be set to Double Click if you want to use Traffic-Aware Cruise Control independently of
Autosteer.
• Autopilot Activation: Choose how to activate Autosteer. If set to Single Click, both Traffic-Aware Cruise Control and
Autosteer engage when you single-press the right scroll wheel. If set to Double Click, you must double-press the right
scroll wheel to engage Autosteer.
NOTE: Autopilot Activation must be set to Double Click if you want to use Traffic-Aware Cruise Control independently of
Autosteer.
• Autopilot Activation: Choose how to activate Autosteer. If set to Single Pull, both Traffic-Aware Cruise Control and
Autosteer engage when you pull the drive stalk down once. If set to Double Pull, you must pull the drive stalk down twice in
quick succession to engage Autosteer.
NOTE: Autopilot Activation must be set to Double Pull if you want to use Traffic-Aware Cruise Control independently of
Autosteer.
• Autopilot Activation: Choose how to activate Autosteer. If set to Single Pull, both Traffic-Aware Cruise Control and
Autosteer engage when you pull the drive stalk down once. If set to Double Pull, you must pull the drive stalk down twice in
quick succession to engage Autosteer.
NOTE: Autopilot Activation must be set to Double Pull if you want to use Traffic-Aware Cruise Control independently of
Autosteer.
• Green Traffic Light Chime: In Canada and U.S.: If on, a chime will sound when you are waiting at a red traffic light and the
light turns green. If you are not actively using Traffic-Aware Cruise Control and are waiting at a red light with a car in front
of you, the chime sounds when the car ahead of you advances.
Traffic-Aware Cruise Control
Traffic-Aware Cruise Control is always enabled.
When Traffic-Aware Cruise Control is available but not engaged, the instrument clustertouchscreen displays
the cruising speed in gray. The number shown represents the speed that will be set when you engage TrafficAware Cruise Control.
When Traffic-Aware Cruise Control is actively cruising at a set speed, the speed is highlighted with blue text.
To engage Traffic-Aware Cruise Control, press the right scroll wheel, then release the accelerator pedal to allow Traffic-Aware
Cruise Control to maintain the cruising speed. A chime sounds to indicate that Traffic-Aware Cruise Control is now active. You
can apply the accelerator at any time to temporarily override the set cruising speed.
NOTE: If Autopilot Activation is set to Single Click, pressing the right scroll wheel once also activates Autosteer (which
includes Traffic-Aware Cruise Control). Touch Controls > Autopilot > Autopilot Activation and choose Double Click to use
Traffic-Aware Cruise Control independently of Autosteer when you single-press the right scroll wheel.
To engage Traffic-Aware Cruise Control, press the right scroll wheel, then release the accelerator pedal to allow Traffic-Aware
Cruise Control to maintain the cruising speed. A chime sounds to indicate that Traffic-Aware Cruise Control is now active. You
can apply the accelerator at any time to temporarily override the set cruising speed.
1278
Owner's Manual
Autopilot
NOTE: If Autopilot Activation is set to Single Click, pressing the right scroll wheel once also activates Autosteer (which
includes Traffic-Aware Cruise Control). Touch Controls > Autopilot > Autopilot Activation and choose Double Click to use
Traffic-Aware Cruise Control independently of Autosteer when you single-press the right scroll wheel.
To engage Traffic-Aware Cruise Control when it is available (the car status area of the touchscreen displays the gray cruising
speed icon), pull the drive stalk down once, then release the accelerator pedal to allow Traffic-Aware Cruise Control to
maintain the cruising speed. A chime sounds to indicate that Traffic-Aware Cruise Control is now active. You can apply the
accelerator at any time to temporarily override the set cruising speed.
NOTE: If Autopilot Activation is set to Single Pull, pulling the drive stalk down once also activates Autosteer (which includes
Traffic-Aware Cruise Control). Touch Controls > Autopilot > Autopilot Activation and choose Double Pull to use Traffic-Aware
Cruise Control independently of Autosteer when you pull the drive stalk down once.
To engage Traffic-Aware Cruise Control when it is available (the car status area of the touchscreen displays the gray cruising
speed icon), pull the drive stalk down once, then release the accelerator pedal to allow Traffic-Aware Cruise Control to
maintain the cruising speed. A chime sounds to indicate that Traffic-Aware Cruise Control is now active. You can apply the
accelerator at any time to temporarily override the set cruising speed.
NOTE: If Autopilot Activation is set to Single Pull, pulling the drive stalk down once also activates Autosteer (which includes
Traffic-Aware Cruise Control). Touch Controls > Autopilot > Autopilot Activation and choose Double Pull to use Traffic-Aware
Cruise Control independently of Autosteer when you pull the drive stalk down once.
WARNING: Traffic-Aware Cruise Control is designed for your driving comfort and convenience and is not a collision
warning or avoidance system. It is your responsibility to stay alert, drive safely, and be in control of the vehicle at all
times. Never depend on Traffic-Aware Cruise Control to adequately slow down CybertruckModel SModel XModel
3Model Y. Always watch the road in front of you and be prepared to take corrective action at all times. Failure to do so
can result in serious injury or death. For more information, see Limitations and Warnings on page 631.
Owner's Manual
1279
Autopilot
Autosteer
To enable Autosteer:
1. Touch Controls > Autopilot > Autopilot Features > Autosteer (Beta).
2. After carefully reading and understanding the popup window, touch Yes.
To indicate that Autosteer is available (but not actively steering
CybertruckModel SModel XModel 3Model Y), the instrument paneltop corner of the
touchscreen displays a gray Autosteer icon next to the driving gear. In situations where
Autosteer is temporarily unavailable, the Autosteer icon disappears. (For example, if your
driving speed is not within the speed required for Autosteer to operate.)
To initiate Autosteer, press the right scroll wheelpress the right scroll wheelmove the drive stalk fully down twice in quick
successionmove the drive stalk fully down twice in quick succession.
NOTE: If the setting for Autopilot Activation is set to Double Click, you must double-press the right scroll wheel to engage
Autosteer (see Autopilot Settings on page 552).
NOTE: If the setting for Autopilot Activation is set to Double Click, you must double-press the right scroll wheel to engage
Autosteer (see Autopilot Settings on page 552).
NOTE: If the setting for Autopilot Activation is set to Single Pull, pulling the drive stalk down once engages Autosteer (see
Autopilot Settings on page 552).
NOTE: If the setting for Autopilot Activation is set to Single Pull, pulling the drive stalk down once engages Autosteer (see
Autopilot Settings on page 552).
1280
Owner's Manual
Autopilot
Autosteer confirms activation with an audible chime and briefly displays a message on the instrument clustertouchscreen
reminding you to pay attention to the road and be ready to take over at any time.
To indicate that Autosteer is now active, the instrument clustertouchscreen displays
the Autosteer icon in blue.
When Autosteer is able to detect lane markings, it displays the edges of the driving lane in blue on the instrument
clustertouchscreen.
Owner's Manual
1281
Autopilot
1282
Owner's Manual
Autopilot
Whenever Autosteer is active, Traffic-Aware Cruise Control is active as well.
In situations where the speed limit cannot be detected when Autosteer is engaged, Autosteer reduces your driving speed and
limits the set cruising speed to 45 mph (70 km/h). Although you can manually accelerate to exceed the limited speed,
CybertruckModel SModel XModel 3Model Y will not brake for detected obstacles as long as you are applying the accelerator
pedal. Autosteer slows down to the limited speed when you release the accelerator pedal. When you leave the road or
disengage Autosteer by using the steering wheelsteering yoke (or steering wheel), you can increase your set speed again, if
desired.
WARNING: Steering is limited when Autosteer is enabled. Therefore, CybertruckModel SModel XModel 3Model Y may
not be able to handle tight turns. Be prepared to take control of the vehicle at all times.
WARNING: Autosteer is a hands-on assistance feature. Keep your hands on the steering wheelsteering yoke (or steering
wheel) at all times, be mindful of road conditions and surrounding traffic, and always be prepared to take immediate
action. Failure to follow these instructions could cause damage, serious injury or death. It is your responsibility to
familiarize yourself with the limitations of Autosteer and the situations in which it may not work as expected. For more
information, see Limitations and Warnings on page 631.
Auto Lane Change
If you engage a turn signal while Autosteer is active, CybertruckModel SModel XModel 3Model Y moves into the adjacent lane
in the direction indicated by the turn signal, provided the following conditions are met:
• The turn signal is engaged.
• Lane markings indicate that a lane change is permitted.
• Midway through the lane change, CybertruckModel SModel XModel 3Model Y must detect the target lane's outside lane
marking. If this lane marking is not detected, the lane change is aborted and CybertruckModel SModel XModel 3Model Y
returns to its original driving lane.
• The view of the camera(s) is not obstructed.
• CybertruckModel SModel XModel 3Model Y does not detect a vehicle in its blind spot, or a vehicle or obstacle up to the
center of the target lane. If a vehicle or other obstacle is detected in the target lane, it is shown in red in the visualization on
the instrument clustertouchscreen and CybertruckModel SModel XModel 3Model Y does not complete the lane change
until it is safe to do so.
Owner's Manual
1283
Autopilot
NOTE: Auto Lane Change cancels if the lane change cannot be completed in 5 seconds.
WARNING: Although Autopilot is designed to detect vehicles and obstacles in adjacent lanes, it is your responsibility to
always perform visual checks to make sure it is safe and appropriate to move into the target lane. If Autopilot cannot
change lanes due to inadequate data, the instrument clustertouchscreen displays a series of warnings. Therefore, when
using Auto Lane Change, always pay attention to the instrument clustertouchscreen and be prepared to manually steer
CybertruckModel SModel XModel 3Model Y.
The minimum speed at which Autopilot changes lanes may vary depending on region, adjacent lane speeds, and other factors.
Always be ready to manually steer and change lanes as necessary. When an automatic lane change is in progress, Overtake
Acceleration is activated, allowing CybertruckModel SModel XModel 3Model Y to accelerate closer to a vehicle in front (see
Overtake Acceleration on page 572).
When you engage a turn signal, Autopilot moves CybertruckModel SModel XModel 3Model Y one lane at a time. Moving into
an additional lane requires you to engage the turn signal a second time after the first lane change is complete.
As CybertruckModel SModel XModel 3Model Y changes lanes, it is important to monitor its performance by watching the
driving path in front of you and the surrounding area. Stay prepared to take over steering at any time. As you are crossing over
into the adjacent lane, the instrument clustertouchscreen displays the location in the lane that
CybertruckModel SModel XModel 3Model Y is moving into.
1284
Owner's Manual
Autopilot
Navigate on Autopilot
To enable Navigate on Autopilot, touch Controls > Autopilot > Navigate on Autopilot (Beta). Then, to customize how you want
Navigate on Autopilot to operate, touch Customize Navigate on Autopilot:
• Enable at Start of Every Trip: Choose whether to automatically enable Navigate on Autopilot for every navigation route.
When enabled, the Navigate on Autopilot button on the turn-by-turn direction list is already enabled at the start of every
trip.
• Speed Based Lane Changes: Navigate on Autopilot is designed to perform both route-based and speed-based lane
changes. Speed-based lanes changes are optional. You can use this setting to disable speed-based lane changes or to
specify how assertively you want Navigate on Autopilot to change lanes to achieve the set cruising speed (Mild, Average, or
Mad Max).
• Exit Passing Lane: Choose whether you want Navigate on Autopilot to maneuver out of a passing lane when navigating to a
destination. In addition to route-based and speed-based lane changes, Navigate on Autopilot requests a lane change out
of a passing lane as a reminder to stay in a slower lane when you are not passing other vehicles. Choose No to disable this
and keep CybertruckModel SModel XModel 3Model Y in a passing lane except when needed to stay on the navigation
route.
• Require Lane Change Confirmation: By default, Navigate on Autopilot requires your confirmation before proceeding with a
lane change by pressing the appropriate turn signalengaging the appropriate turn signal. If you do not confirm the lane
change within 3 seconds, a chime sounds to remind you that Navigate on Autopilot requires your confirmation to change
lanes.
• Lane Change Notification: You can specify if or how you want to be notified of lane changes (Off, Chime, Vibrate, or Both).
If Enable at Start of Every Trip is turned on, Navigate on Autopilot engages automatically when:
• Autosteer is active.
• You are navigating to a destination.
Owner's Manual
1285
Autopilot
• You are on a controlled-access highway.
Once enabled, the Navigate on Autopilot button appears on the map’s turn-by-turn direction list whenever a navigation route
is active and the route includes at least one controlled-access highway.
If Enable at Start of Every Trip is turned off, touch the Navigate on Autopilot button above the turn-by-turn directions to enable
it. Once the Navigate on Autopilot is selected, it will engage whenever you engage Autosteer.
The Navigate on Autopilot icon shows in the turn-by-turn direction list when you are navigating to
a destination and Navigate on Autopilot is available but not active.
If Navigate on Autopilot is active, the icon is blue. If Enable at Start of Every Trip is turned on, the
Navigate on Autopilot icon is selected whenever you start navigation. Touch the icon to cancel
Navigate on Autopilot and revert to Autosteer.
Whenever Navigate on Autopilot is active, the Navigate on Autopilot button is blue and the instrument clustertouchscreen
displays the driving lane as a single blue line in front of CybertruckModel SModel XModel 3Model Y:
1286
Owner's Manual
Autopilot
The turn-by-turn directions display the Autosteer icon next to the maneuvers (such as off-ramps) that Navigate on Autopilot
will handle.
When Navigate on Autopilot is engaged CybertruckModel SModel XModel 3Model Y automatically makes both speed-based
and route-based lane changes after driver confirmation.
• Speed Based Lane Changes: Navigate on Autopilot changes lanes to reduce driving time to your destination. For example, if
CybertruckModel SModel XModel 3Model Y is behind a vehicle going below the set cruising speed, Navigate on Autopilot
will move into the passing lane to pass it. Speed-based lanes changes are optional.
• Route Based Lane Changes: Navigate on Autopilot changes lanes to route you to your destination. For example, Navigate on
Autopilot will move into the exit lane as CybertruckModel SModel XModel 3Model Y approaches the off-ramp specified by
the navigation route.
When the instrument clustertouchscreen displays a message asking you to confirm the lane change, engage the appropriate
turn signal. If you do not confirm the lane change within 3 seconds, a chime sounds to remind you that Navigate on Autopilot
requires your confirmation to change lanes. Auto Lane Change cancels if the lane change cannot be completed in 5 seconds.
If you ignore a route-based lane change suggestion (for example, you are driving in the left lane while approaching an offramp on the right side of the highway), Navigate on Autopilot is unable to maneuver onto the off-ramp and as a result, you are
re-routed to your destination.
Owner's Manual
1287
Autopilot
NOTE: When determining navigation routes, and maneuvers at interchanges, Navigate on Autopilot considers whether or not
you want to use High Occupancy Vehicle (HOV) lanes. Therefore, ensure the Use HOV Lanes setting is appropriate for your
circumstances (see Maps and Navigation on page 702). If the setting is off, Navigate on Autopilot never uses a HOV lane,
regardless of time of day. If the setting is on, Navigate on Autopilot uses HOV lanes, whenever applicable.
CAUTION: Navigate on Autopilot may not always attempt to exit at an off-ramp or change lanes, even when an exit or
lane change is determined by the navigation route. Always remain alert and be prepared to manually steer onto an offramp, or make a lane change to prepare for, or to exit at, an off-ramp or interchange.
Navigate on Autopilot activates and deactivates based on the type of road you are driving on. When Navigate on Autopilot is
active and you approach an off-ramp or interchange along your navigation route, the appropriate turn signal engages and
Autosteer maneuvers CybertruckModel SModel XModel 3Model Y onto the off-ramp or interchange.
When you leave a controlled-access highway Navigate on Autopilot reverts to Autosteer—a chime sounds and the instrument
clustertouchscreen displays the driving lane lines in blue (instead of the single blue in front of
CybertruckModel SModel XModel 3Model Y). When Navigate on Autopilot deactivates, Autosteer remains active. Always be
prepared to take appropriate action.
WARNING: Navigate on Autopilot is a hands-on feature. Keep your hands on the steering wheelsteering yoke (or
steering wheel) at all times, be mindful of road conditions and surrounding traffic, and always be prepared to take
immediate action. Failure to follow these instructions could cause damage, serious injury or death. It is your
responsibility to familiarize yourself with the limitations of Navigate on Autopilot and the situations in which it may not
work as expected. For more information, see Limitations and Warnings on page 631.
Canceling Autopilot
Traffic-Aware Cruise Control cancels when:
• You move the drive stalk upward.
◦ CAUTION: If you move the drive stalk upward and hold it up for more than one second,
CybertruckModel SModel XModel 3Model Y shifts into Neutral after canceling Autosteer.
• You move the drive stalk upward.
◦ CAUTION: If you move the drive stalk upward and hold it up for more than one second,
CybertruckModel SModel XModel 3Model Y shifts into Neutral after canceling Autosteer.
• You press the right scroll wheel on the steering wheelsteering yoke (or steering wheel).
• You press the right scroll wheel on the steering wheelsteering yoke (or steering wheel).
• You press the brake pedal.
• You exceed 90 mph (150 km/h).
• You shift into Reverse, Park, or Neutral.
• A door is opened.
• An Automatic Emergency Braking event occurs (see Collision Avoidance Assist on page 645).
• The driver's seatbelt is released, and/or the driver gets out of their seat.
1288
Owner's Manual
Autopilot
When Traffic-Aware Cruise Control cancels, the cruising speed icon on the instrument clustertouchscreen turns gray to
indicate that Traffic-Aware Cruise Control is no longer active.
Autosteer cancels when any of the above actions are taken. In addition, Autosteer cancels when:
• You exceed 85 mph (140 km/h).
• You take over steering manually.You apply rotational force to the steering wheelsteering yoke (or steering wheel) (even a
slight amount).
WARNING: If Autopilot Activation is set to Double Click and Autosteer cancels because you started steering
manuallyapplied rotational force to the steering wheelsteering yoke (or steering wheel), Traffic-Aware Cruise Control
remains active. If Autopilot Activation is set to Single Click and Autosteer cancels because you started steering
manuallyapplied rotational force to the steering wheelsteering yoke (or steering wheel), Traffic-Aware Cruise Control
also cancels.
WARNING: If Autopilot Activation is set to Double Click and Autosteer cancels because you started steering
manuallyapplied rotational force to the steering wheel, Traffic-Aware Cruise Control remains active. If Autopilot
Activation is set to Single Click and Autosteer cancels because you started steering manuallyapplied rotational force
to the steering wheel, Traffic-Aware Cruise Control also cancels.
WARNING: If Autopilot Activation is set to Double Pull and Autosteer cancels because you started steering
manuallyapplied rotational force to the steering wheel, Traffic-Aware Cruise Control remains active. If Autopilot
Activation is set to Single Pull and Autosteer cancels because you started steering manuallyapplied rotational force
to the steering wheel, Traffic-Aware Cruise Control also cancels.
Owner's Manual
1289
Autopilot
WARNING: If Autopilot Activation is set to Double Pull and Autosteer cancels because you started steering
manuallyapplied rotational force to the steering wheel, Traffic-Aware Cruise Control remains active. If Autopilot
Activation is set to Single Pull and Autosteer cancels because you started steering manuallyapplied rotational force
to the steering wheel, Traffic-Aware Cruise Control also cancels.
• You do not respond to repeated reminders to keep your hands on the wheel and subsequent messages on the instrument
clustertouchscreen (see Driver Attentiveness on page 573).
When Autosteer cancels, a chime sounds and the Autosteer icon either turns gray to indicate that Autosteer is no longer
active, or disappears to indicate that it is not currently available.
Navigate on Autopilot cancels when Autosteer cancels, as described above. In addition, Navigate on Autopilot cancels when:
• You touch the Navigate on Autopilot button on the map’s turn-by-turn direction list. In this case, Autosteer is still active.
• You leave a controlled-access highway. When this happens, Autosteer is still active.
When Navigate on Autopilot cancels but Autosteer remains active, a chime sounds and the visualization goes from a single
blue line in the driving lane to two blue lines on either side of the lane.
When Traffic-Aware Cruise Control or Autosteer cancels, CybertruckModel SModel XModel 3Model Y does not coast.
Instead, regenerative braking slows down CybertruckModel SModel XModel 3Model Y in the same way as when you move
your foot off the accelerator when driving without Traffic-Aware Cruise Control (see Regenerative Braking on page 463).
While Using Autopilot
When Traffic-Aware Cruise Control is active and Autopilot is maintaining a set speed, the speed is highlighted with blue text
on the instrument clustertouchscreen.
When Autosteer is active, the steering wheelsteering yoke (or steering wheel) icon is blue and the lane markings are
highlighted in blue on the visualization. If Navigate on Autopilot is also active, the Navigate on Autopilot button is blue and the
instrument clustertouchscreen displays the driving lane as a single blue line in front of CybertruckModel SModel XModel
3Model Y.
To display more details about the roadway and its surroundings, such as road markings, stop lights, and objects (such as trash
cans and poles), touch Controls > Autopilot > Full Self-Driving Visualization Preview.
If unable to detect lane markings, Autosteer may determine the driving lane based on a vehicle you are following. In most
cases, Autosteer attempts to center CybertruckModel SModel XModel 3Model Y in the driving lane. However, there may be
situations in which Autosteer follows a driving path that is offset from the center of the lane (for example, if guard rails are
detected).
Maintaining the Set Speed
When Autopilot is active, CybertruckModel SModel XModel 3Model Y maintains your set cruising speed whenever a vehicle is
not detected in front of it. When cruising behind a vehicle, CybertruckModel SModel XModel 3Model Y accelerates and
decelerates as needed to maintain a chosen following distance (see Adjusting the Following Distance on page 568), up to the
set speed.
You can manually accelerate at any time by pressing the accelerator pedal, but when you release the pedal
CybertruckModel SModel XModel 3Model Y resumes cruising at the set speed.
CybertruckModel SModel XModel 3Model Y also adjusts the cruising speed when entering and exiting curves.
When CybertruckModel SModel XModel 3Model Y is actively slowing down to maintain the selected distance from the vehicle
ahead, brake lights turn on. You may notice slight movement of the brake pedal. However, when
CybertruckModel SModel XModel 3Model Y is accelerating, the accelerator pedal does not move.
Changing the Set Speed
Roll the right scroll wheel up to increase, or down to decrease, the set speed.
You can also change the cruising speed to the current speed limit (including any offset you've specified), by either:
1290
Owner's Manual
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.26_0624.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-31
MFR Internal Campaign ID/Software Version: 07/16/1905
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.