NHTSA ID Number: 11005739
Manufacturer Communication Number: 2024.26.3_SX_0724.pdf
TSB/Document Date: 2024-08-06
Summary
Tesla does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
1. Es posible que este equipo o dispositivo no cause interferencia perjudicial.
2. Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Radio Frequency Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician to help.
CAUTION: This equipment and its antennas must not be co-located or operated with another antenna or transmitter.
Canada
CAN ICES-003 (B)/NMB-003(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareilne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
lefonctionnement.
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour unenvironnement non contrôlé.
Déclaration d'exposition aux radiations
Le produit est conforme à l'exposition RF ISED pour le transfert de puissance sans fil de consommateurs de faible puissance.
La limite d'exposition RF fixée pour un environnement non contrôlé est sans danger pour le fonctionnement prévu tel que
décrit dans ce manuel. L'exposition RF supplémentaire que la conformité a été démontrée à 20cm et plus de séparation du
corps de l'utilisateur ou de mettre l'appareil à la puissance de sortie inférieure si une telle fonction est disponible.
Owner's Manual
1025
Mobile Connector
Gen 1
Safety Information
Save These Important Safety Instructions
This document contains important instructions and warnings that must be followed when using your Mobile Connector.
Warnings
WARNING: Read this entire document before using the Mobile Connector. Failure to do so or to follow any of the
instructions or warnings in this document can result in fire, electrical shock, serious injury or death.
WARNING: Use the Mobile Connector only within the specified operating parameters.
WARNING: The Mobile Connector is designed only for charging a Tesla vehicle (excluding Tesla Roadster). Do not use it
for any other purpose or with any other vehicle or object. The Mobile Connector is intended only for vehicles that do not
require ventilation during charging.
WARNING: Do not use the Mobile Connector’s adapters in any outlet for which they are not designed.
WARNING: Do not use (or discontinue using) the Mobile Connector if it is defective, appears cracked, frayed, broken or
otherwise damaged, or fails to operate.
WARNING: Do not attempt to open, disassemble, repair, tamper with, or modify the Mobile Connector. The Mobile
Connector is not user-serviceable. Contact Tesla for any repairs.
WARNING: Do not use an extension cord, a multi-outlet adapter, a multi-plug, a conversion plug, or a power strip to plug
in the Mobile Connector.
WARNING: Do not disconnect the Mobile Connector from the wall outlet when the vehicle is charging.
WARNING: Do not plug the Mobile Connector into a damaged, loose or worn power outlet. Ensure that the prongs on the
Mobile Connector fit snugly into the wall outlet.
WARNING: Do not connect the Mobile Connector into a power outlet that is not properly grounded.
WARNING: Do not expose the Mobile Connector to flammable or harsh chemicals or vapors. Do not use or store the
Mobile Connector in a recessed area or below floor level. When using the Mobile Connector in an inside location such as
a garage, position the Mobile Connector’s main controller at least 18 inches (46 cm) above the floor.
WARNING: Do not use the Mobile Connector when either you, the vehicle or the Mobile Connector is exposed to severe
rain, snow, electrical storm or other inclement weather.
WARNING: When transporting the Mobile Connector, handle with care to prevent damage to any of its components. Do
not subject the Mobile Connector to strong force or impact. Do not pull, twist, tangle, drag or step on the Mobile
Connector or any of its components.
WARNING: Protect the Mobile Connector from moisture, water and foreign objects at all times. If any exist or appear to
have corroded or damaged the Mobile Connector, do not use the Mobile Connector.
WARNING: If rain falls during charging, do not allow rain water to run along the length of charge cable, causing the
electrical outlet or charging port to become wet.
WARNING: Do not plug the Mobile Connector into an electrical outlet that is submerged in water or covered in snow. If,
in this situation, the Mobile Connector is already plugged in and needs to be unplugged, turn off the breaker before
unplugging the Mobile Connector.
WARNING: Do not touch the Mobile Connector’s end terminals with sharp metallic objects, such as wire, tools or
needles. Do not forcefully fold any part of the Mobile Connector or damage it with sharp objects. Do not insert foreign
objects into any part of the Mobile Connector.
WARNING: Do not charge a vehicle that is covered with a non-Tesla approved car cover.
WARNING: Ensure that the Mobile Connector’s charging cable does not obstruct pedestrians or other vehicles or
objects.
1026
Owner's Manual
Mobile Connector
WARNING: Use of the Mobile Connector may affect or impair the operation of medical or implantable electronic devices,
such as an implantable cardiac pacemaker or an implantable cardioverter defibrillator. Before using the Mobile
Connector, check with the electronic device manufacturer concerning the effects that charging may have on any such
electronic device.
WARNING: Do not use cleaning solvents to clean the Mobile Connector.
Cautions
CAUTION: Do not use private power generators as a power source for charging.
CAUTION: Do not operate the Mobile Connector in temperatures outside its operating range of -22°F to +122°F (-30°C
to +50°C).
CAUTION: Store the Mobile Connector in a clean dry place in temperatures between -40°F and +185°F (-40°C and
+85°C).
General Information
Specifications
Use only a 120 volt, 208 volt or 240 volt AC supply, 50/60 hertz wall outlet that has a dedicated and properly grounded
circuit, and is rated for at least 15 amps.
If possible, use a dedicated receptacle with a single socket. If the receptacle has two sockets, do not plug any other items into
the other socket.
The Mobile Connector is 20 feet (6 meters) long. Use an existing outlet or install a new outlet within approximately 13 feet
(4 meters) of the vehicle's charge port and at least 18 inches (45 cm) above the ground. The charge port is located on the left
side of the vehicle, behind a door that is part of the rear tail light assembly.
WARNING: Do not use an extension cord, a multi-outlet adapter, a multi-plug, a conversion plug, or a power strip to plug
in the Mobile Connector.
Charging Time
Charging times vary based on the voltage and current available from the power outlet, subject to various conditions. Charge
time also depends on ambient temperature and the vehicle’s Battery temperature. If the Battery is not within the optimal
temperature range for charging, the vehicle heats or cools the Battery before or during charging.
To estimate the total time it takes to recharge the Battery in hours (from near zero percent to near one hundred percent),
divide the battery size (kWh) by power (kW). Different adapters provide different current and power outputs.
While you are charging your vehicle, you can also touch the Charging icon to review the charging status information; it displays
the time remaining until fully charged at the currently selected charge level.
For more information on how long it takes to charge your Tesla vehicle, go to www.tesla.com/support.
Adapters
The Mobile Connector includes two outlet adapters: one for a standard 120 volt household outlet and a second adapter for a
240 volt outlet. For faster charging, use a 240 volt outlet. Consult an electrician to install a 240 volt outlet where you plan to
park your Tesla
vehicle.
NEMA 5-15 Adapter
Owner's Manual
1027
Mobile Connector
NEMA 14-50 Adapter
1028
Owner's Manual
Mobile Connector
Additional adapters are available for purchase. For details, go to: shop.tesla.com.
NOTE: Images in this document are for demonstration purposes only.
Removing the Adapter
To remove an adapter, push the button on the Mobile Connector’s charge cable and pull the adapter from its socket.
Attaching the Adapter
To attach an adapter, line up the adapter with the Mobile Connector’s charge cable and push until it snaps into place.
Owner's Manual
1029
Mobile Connector
How to Charge
Plugging In
CAUTION: Always inspect the Mobile Connector and adapter for damage prior to each use.
1. Ensure that the Mobile Connector’s adapter matches the outlet you want to use.
2. Plug the Mobile Connector’s adapter into the power outlet. The adapter should be inserted completely into the power
outlet.
NOTE: Second generation adapter shown.
3. With your vehicle unlocked, press the button on the top of the Mobile Connector handle. The charge port door opens.
NOTE: Your vehicle is unlocked when the key is nearby and automatic unlocking is enabled. You can also open the charge
port door using any of these methods:
1030
Owner's Manual
Mobile Connector
4. Plug the Mobile Connector handle into your vehicle's charge port.
5. When you plug the Mobile Connector into your vehicle, the charge port indicator light pulses green during charging, and
the vehicle displays charging information. The display turns off after you close all doors, and the charge port indicator light
stops pulsing shortly after you lock the vehicle.
Unplugging
When charging is complete, the light stops pulsing and turns solid green.
1. With the vehicle unlocked, press and hold the button on the Mobile Connector handle, wait for the charge port indicator
light to turn white, and then pull the Mobile Connector out of the charge port.
NOTE: To prevent unauthorized unplugging of the charge cable, the vehicle must be unlocked or able to recognize a key
nearby before you can disconnect the charge cable.
NOTE: When the latch in the charge port retracts, the Mobile Connector stops supplying power and you can safely unplug
it from the vehicle.
2. The charge port door automatically closes after you remove the charge cable.
NOTE: If your vehicle is not equipped with a motorized charge port door, you may need to push the charge port door
closed.
Tesla recommends leaving the Mobile Connector plugged into the wall outlet to reduce wear and tear from day-to-day use.
If you do not plan to use the Mobile Connector for a while (such as when you leave for vacation), unplug it, and store it in an
appropriate location.
For More Information
For more detailed information on how to charge your vehicle (adjust charge settings, view charging status, etc.), refer to the
charging section in the vehicle Owner's Manual.
Troubleshooting
Gen 1 Mobile Connector Status Lights
Under normal conditions, when charging is in progress, the Mobile Connector’s lights illuminate sequentially, and the red light
is off. Identify problems by paying attention to these lights.
NOTE: In some cases, you may need to reset the device by pressing the RESET button located on the back.
Front
Back
Owner's Manual
1031
Mobile Connector
Green Lights
Red Light
What it means
What to do
All lights
streaming
Off
Charging is in progress
All on
Off
Power on. Mobile
Make sure the Mobile Connector is plugged into the vehicle.
Connector is powered, but
not charging, or scheduled
charging is enabled
Off
1 flash
Off
Nothing. The Mobile Connector is successfully charging.
Ground fault. Electrical
current is leaking through
a potentially unsafe path
This should automatically reset in 15 minutes. If not, ensure no
one is touching or inside the vehicle, then press the RESET
button.
2 flashes
Self check failed
Unplug the Mobile Connector from the vehicle and press the
RESET button. Plug the Mobile Connector back into the vehicle.
If the error persists, unplug the Mobile Connector from both the
vehicle and the power outlet, then plug it back in. When plugging
back in, always plug it into the outlet first.
Off
3 flashes
Contactor failed
Unplug the Mobile Connector from the vehicle and wait
10 seconds. If the error persists, contact your closest Service
Center (https://www.tesla.com/findus).
Off
4 flashes
The ground assurance
monitoring circuit has
detected loss of ground
Make sure the power outlet is properly grounded. Consider
connecting to a different outlet. If uncertain, ask your electrician.
Off
5 flashes
Sense circuit fault
Make sure the Mobile Connector’s adapter is attached properly.
Off
6 flashes
Thermal fault
Consider charging in a cooler area, such as indoors or in the
shade.
Off
Off
More than 6 The Mobile Connector may Contact your closest Service Center (https://www.tesla.com/
flashes
need repair
findus).
Off
Power lost
Unplug the Mobile Connector and check that the power outlet
has power.
Questions?
[email protected]
For 24/7 technical support: 1-877-79TESLA (1-877-798-3752)
For home charging installation inquiries: 1-650-681-6133
Gen 2
Safety Information
Save These Important Safety Instructions
This document contains important instructions and warnings that must be followed when using your Mobile Connector.
Warnings
WARNING: Read this entire document before using the Mobile Connector. Failure to do so or to follow any of the
instructions or warnings in this document can result in fire, electrical shock, serious injury or death.
WARNING: Use the Mobile Connector only within the specified operating parameters.
WARNING: The Mobile Connector is designed only for charging a Tesla vehicle (excluding Tesla Roadster). Do not use it
for any other purpose or with any other vehicle or object. The Mobile Connector is intended only for vehicles that do not
require ventilation during charging.
WARNING: Do not use the Mobile Connector’s adapters in any outlet for which they are not designed.
1032
Owner's Manual
Mobile Connector
WARNING: Do not use (or discontinue using) the Mobile Connector if it is defective, appears cracked, frayed, broken or
otherwise damaged, or fails to operate.
WARNING: Do not attempt to open, disassemble, repair, tamper with, or modify the Mobile Connector. The Mobile
Connector is not user-serviceable. Contact Tesla for any repairs.
WARNING: Do not use an extension cord, a multi-outlet adapter, a multi-plug, a conversion plug, or a power strip to plug
in the Mobile Connector.
WARNING: Do not disconnect the Mobile Connector from the wall outlet when the vehicle is charging.
WARNING: Do not plug the Mobile Connector into a damaged, loose or worn power outlet. Ensure that the prongs on the
Mobile Connector fit snugly into the wall outlet.
WARNING: Do not connect the Mobile Connector into a power outlet that is not properly grounded.
WARNING: Do not expose the Mobile Connector to flammable or harsh chemicals or vapors. Do not use or store the
Mobile Connector in a recessed area or below floor level. When using the Mobile Connector in an inside location such as
a garage, position the Mobile Connector’s main controller at least 18 inches (46 cm) above the floor.
WARNING: Do not use the Mobile Connector when either you, the vehicle or the Mobile Connector is exposed to severe
rain, snow, electrical storm or other inclement weather.
WARNING: When transporting the Mobile Connector, handle with care to prevent damage to any of its components. Do
not subject the Mobile Connector to strong force or impact. Do not pull, twist, tangle, drag or step on the Mobile
Connector or any of its components.
WARNING: Protect the Mobile Connector from moisture, water and foreign objects at all times. If any exist or appear to
have corroded or damaged the Mobile Connector, do not use the Mobile Connector.
WARNING: If rain falls during charging, do not allow rain water to run along the length of charge cable, causing the
electrical outlet or charging port to become wet.
WARNING: Do not plug the Mobile Connector into an electrical outlet that is submerged in water or covered in snow. If,
in this situation, the Mobile Connector is already plugged in and needs to be unplugged, turn off the breaker before
unplugging the Mobile Connector.
WARNING: Do not touch the Mobile Connector’s end terminals with sharp metallic objects, such as wire, tools or
needles. Do not forcefully fold any part of the Mobile Connector or damage it with sharp objects. Do not insert foreign
objects into any part of the Mobile Connector.
WARNING: Do not charge a vehicle that is covered with a non-Tesla approved car cover.
WARNING: Ensure that the Mobile Connector’s charging cable does not obstruct pedestrians or other vehicles or
objects.
WARNING: Use of the Mobile Connector may affect or impair the operation of medical or implantable electronic devices,
such as an implantable cardiac pacemaker or an implantable cardioverter defibrillator. Before using the Mobile
Connector, check with the electronic device manufacturer concerning the effects that charging may have on any such
electronic device.
WARNING: Do not use cleaning solvents to clean the Mobile Connector.
Cautions
CAUTION: Do not use private power generators as a power source for charging.
CAUTION: Do not operate the Mobile Connector in temperatures outside its operating range of -22°F to +122°F (-30°C
to +50°C).
CAUTION: Store the Mobile Connector in a clean dry place in temperatures between -40°F and +185°F (-40°C and
+85°C).
Owner's Manual
1033
Mobile Connector
General Information
Mobile Connector Component Overview
1. Handle
2. Button on handle
3. Cable
4. NEMA 5-15 Adapter
5. NEMA 14-50 Adapter (if equipped)
6. Mobile Connector controller
7. Status lights
Specifications
Use only a 120 volt, 208 volt or 240 volt AC supply, 50/60 hertz wall outlet that has a dedicated and properly grounded
circuit, and is rated for at least 15A.
1034
Owner's Manual
Mobile Connector
If possible, use a dedicated receptacle with a single socket. If the receptacle has two sockets, do not plug any other items into
the other socket.
The Mobile Connector is 20 feet (6 meters) long. Use an existing outlet or install a new outlet within approximately 13 feet
(4 meters) of the vehicle's charge port and at least 18 inches (45 cm) above the ground. The charge port is located on the left
side of the vehicle, behind a door that is near the rear tail light assembly.
WARNING: Do not use an extension cord, a multi-outlet adapter, a multi-plug, a conversion plug, or a power strip to plug
in the Mobile Connector.
Specifications Reference
Description
Specifications
100-240 volt AC single-phase
Maximum Current
32A maximum; controlled by the appropriate adapter
Grid Frequency
50 or 60 Hz
Cable Length
20 ft (6 m) with adapter installed
Mobile Connector Controller Dimensions
Height: 7.1 in (179.8 mm)
Width: 3.2 in (81.7 mm)
Depth: 1.9 in (47.3 mm)
Weight
5.2 lbs (2.4 kg)
Operating Temperature
-22°F to +122°F (-30°C to +50°C)
Enclosure Type
4X
Ventilation
Not Required
Charging Time
Charging times vary based on the voltage and current available from the power outlet, subject to various conditions. Charge
time also depends on ambient temperature and the vehicle’s Battery temperature. If the Battery is not within the optimal
temperature range for charging, the vehicle heats or cools the Battery before or during charging.
To estimate the total time it takes to recharge the Battery in hours (from near zero percent to near one hundred percent),
divide the battery size (kWh) by power (kW). Different adapters provide different current and power outputs.
While you are charging your vehicle, you can also touch the Charging icon to review the charging status information; it displays
the time remaining until fully charged at the currently selected charge level.
For more information on how long it takes to charge your Tesla vehicle, go to www.tesla.com/support.
Charging Rate Reference
Adapter
Current
Power at 120 Volts
5-20
16A
1.7 kW
5-15
12A
1.3 kW
Adapter
Current
Power at 240 Volts
14-50, 6-50
32A
7.6 kW
14-30, 10-30
24A
5.7 kW
Owner's Manual
1035
Mobile Connector
Adapter
Current
Power at 240 Volts
6-20
16A
3.8 kW
6-15
12A
2.8 kW
Adapters
The Mobile Connector includes two outlet adapters: one for a standard 120 volt household outlet and a second adapter for a
240 volt outlet. For faster charging, use a 240 volt outlet. Consult an electrician to install a 240 volt outlet where you plan to
park your Tesla vehicle.
NOTE: Depending on date of manufacture, your Mobile Connector may not include the NEMA 14-50 adapter. However, one
can be purchased from Tesla.
NEMA 5-15 Adapter
NEMA 14-50 Adapter
1036
Owner's Manual
Mobile Connector
Additional adapters may be available for purchase. For details, go to: shop.tesla.com.
Removing the Adapter
To remove an adapter, firmly grasp the adapter and pull it from its socket.
Owner's Manual
1037
Mobile Connector
Attaching the Adapter
To attach an adapter, line up the adapter with the controller of the Mobile Connector and push it into the socket until it snaps
into place.
NOTE: The Mobile Connector automatically detects the attached adapter and sets the appropriate current draw.
How to Charge
Plugging In
CAUTION: Always inspect the Mobile Connector and adapter for damage prior to each use.
1. Ensure that the Mobile Connector’s adapter matches the outlet you want to use.
2. Plug the Mobile Connector’s adapter into the power outlet. The adapter should be inserted completely into the power
outlet.
NOTE: Second generation adapter shown.
3. With your vehicle unlocked, press the button on the top of the Mobile Connector handle. The charge port door opens.
NOTE: Your vehicle is unlocked when the key is nearby and automatic unlocking is enabled. You can also open the charge
port door using any of these methods:
4. Plug the Mobile Connector handle into your vehicle's charge port.
5. When you plug the Mobile Connector into your vehicle, the charge port indicator light pulses green during charging, and
the vehicle displays charging information. The display turns off after you close all doors, and the charge port indicator light
stops pulsing shortly after you lock the vehicle.
1038
Owner's Manual
Mobile Connector
Unplugging
When charging is complete, the light stops pulsing and turns solid green.
1. With the vehicle unlocked, press and hold the button on the Mobile Connector handle, wait for the charge port indicator
light to turn white, and then pull the Mobile Connector out of the charge port.
NOTE: To prevent unauthorized unplugging of the charge cable, the vehicle must be unlocked or able to recognize a key
nearby before you can disconnect the charge cable.
NOTE: When the latch in the charge port retracts, the Mobile Connector stops supplying power and you can safely unplug
it from the vehicle.
2. The charge port door automatically closes after you remove the charge cable.
NOTE: If your vehicle is not equipped with a motorized charge port door, you may need to push the charge port door
closed.
Tesla recommends leaving the Mobile Connector plugged into the wall outlet to reduce wear and tear from day-to-day use.
If you do not plan to use the Mobile Connector for a while (such as when you leave for vacation), unplug it, and store it in an
appropriate location.
For More Information
For more detailed information on how to charge your vehicle (adjust charge settings, view charging status, etc.), refer to the
charging section in the vehicle Owner's Manual.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.26.3_SX_0724.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-31
MFR Internal Campaign ID/Software Version: 2024.26.3
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.