NHTSA ID Number: 11005739
Manufacturer Communication Number: 2024.26.3_SX_0724.pdf
TSB/Document Date: 2024-08-06
Summary
Tesla does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
Pektron
433
CE Certification
Model #
A-0749G01 and A-0749G11
Europe
Australia
New Zealand
Singapore
South Korea
A-0749G05 and A-0749G15
Pektron
433
China
Hong Kong
Korea
The devices listed above comply with CE standards. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Tesla could void your authority to operate the equipment.
Owner's Manual
637
Declarations of Conformity
Tire Pressure Monitoring System
FCC IDs: TZSTPMS201, Z9F-201FS43X
IC ID: 11852A-201FS4X
The tire pressure monitoring system (TPMS) complies with Part 15 of the FCC rules and RSS-210 of Innovation, Science and
Economic Development Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Tesla could void your authority to operate the equipment.
HomeLink
This device complies with Part 15 of the FCC rules, RSS-210 Industry Canada, and with EU Directive 2014/53/EU.
Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to the device not expressly approved by the manufacturer or Tesla could void your authority to
operate the equipment.
Radio Frequency Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Declarations of Conformity
Key and Passive Unlocking System
FCC Certification
Model Number
Mfr
Frequency
Key fob 1048598
2.4 GHz
WC1
Tesla
127.7KHz
638
Tested For
USA
Canada
Mexico
Taiwan
Global
Owner's Manual
Declarations of Conformity
The devices listed above comply with Part 15 of the FCC rules, Industry Canada's license-exempt RSS Standard(s) and EU
Directive 2014/53/EU.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Tesla could void your authority to operate the equipment.
La Operación de Este Equipo no está Sujeta a las dos following conditions:
1. Es Posible Que Este Equipo o Dispositivo no causar interferencia perjudicial.
2. Este Equipo o Dispositivo debe Aceptar Cualquier interferencia. Incluyendo La Que Pueda causar do Operación no
Deseada.
Radiation Exposure Statement
The product complies with FCC/IC RF Exposure for Low Power Consumer Wireless Power Transfer. The RF exposure limit set
forth for an uncontrolled environment is safe for the operations intended, as described in this manual. Compliance was
demonstrated at a distance of 20 cm or greater between the human body and the device. If the function is available, the
device's output power could be lowered.
IC Certification
The following device is used in vehicles in Canada:
• Key fob Model Number: 1048598 (2.4 GHz)
• Key fob Manufacturer: Tesla
Per IC 20098-1048598, this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
1. l'Appareilne doit pas produire de brouillage, et
2. l'Utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre lefonctionnement.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour unenvironnement non contrôlé.
Déclaration d'exposition aux radiations:
Le produit est conforme à l'exposition RF IC pour le transfert de puissance sans fil de consommateurs de faible puissance. La
limite d'exposition RF fixée pour un environnement non contrôlé est sans danger pour le fonctionnement prévu tel que décrit
dans ce manuel. L'exposition RF supplémentaire que la conformité a été démontrée à 20cm et plus de séparation du corps de
l'utilisateur ou de mettre l'appareil à la puissance de sortie inférieure si une telle fonction est disponible.
IC Certification
La Operación de Este Equipo no está Sujeta a las dos condiciones siguientes:
1. Es Posible Que Este Equipo o Dispositivo no causar interferenciaperjudicial.
2. Este Equipo o Dispositivo debe Aceptar Cualquier interferencia. Incluyendo La Que Pueda causar do Operación no
Deseada.
Owner's Manual
639
Declarations of Conformity
Central Body Controller
FCC Certification
Model Number
Central Body Controller 1031503
Mfr
MHz / GHz
Tesla
315 / 2.4
Tested For
USA
Canada
Per FCC ID 2AEIM-1031503, the devices listed above comply with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Tesla could void your authority to operate the equipment.
IC Certification
The following device is used in vehicles in Canada:
• Central Body Controller Model Number: 1031503 (315 MHz / 2.4 GHz)
• Central Body Controller Manufacturer: Tesla
Per IC 20098-1031503, this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Integral Component Only
The Central Body Controller is an integral part of the vehicle that is installed and secured around other interior trim
components. The Central Body Controller is designed and intended for use only as an integral component and cannot be sold
and/or marketed separately.
Tire Pressure Monitoring System
FCC IDs: TZSTPMS201, Z9F-201FS43X
IC ID: 11852A-201FS4X
The tire pressure monitoring system (TPMS) complies with Part 15 of the FCC rules and RSS-210 of Innovation, Science and
Economic Development Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Tesla could void your authority to operate the equipment.
HomeLink
This device complies with Part 15 of the FCC rules, RSS-210 Industry Canada, and with EU Directive 2014/53/EU.
Operation is subject to the following conditions:
• This device may not cause harmful interference.
640
Owner's Manual
Declarations of Conformity
• This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to the device not expressly approved by the manufacturer or Tesla could void your authority to
operate the equipment.
Radio Frequency Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Declarations of Conformity
FCC and IC Certification
Component
Manufacturer Model
B Pillar Endpoint
Tesla
1607773
Security Controller
Tesla
1614280
Fascia Endpoint
Tesla
1613851
1614285
Tesla
1472547
Radar (if equipped) (if
equipped)
Operating Frequency (MHz) FCC ID
IC
2AEIM-1607773
20098-1607773
2AEIM-1614280
20098-1614280
2AEIM-1613851
20098-1613851
2AEIM-1614285
20098-1614285
2400-2483.5
2AEIM-1472547
20098-1472547
ARS 4-B
76000-77000
OAYARS4B
4135A-ARS4B
Gentex
ADHL5C
286-440
NZLADHL5C
4112A-ADHL5C
CarPC
Tesla
1960000 --
Tesla
WC4
BT USB hub
Tesla
1642783
In-Cabin Radar*
Tesla
Tesla
Owner's Manual
13.56
2400-2483.5
6500-8000
2400-2483.5
2400-2483.5
6500-8000
2400-2483.5
6500-8000
XMR2020AG525RGL 10224A-2020AG525R
YZP-ATC5CPC001
7414C-ATC5CPC001
2AEIM-WC4
20098-WC4
2400-2483.5
2AEIM-1642783
20098-1642783
1616631
60000-64000
2AEIM-1616631
20098-1616631
WC3
127.72 KHz
2AEIM-WC3
20098-WC3
127.72 KHz
13.56
2400-2483.5
641
Declarations of Conformity
*The in-cabin radar is restricted to factory installation.
The devices listed above comply with Part 15 of the FCC rules and Industry Canada's license-exempt RSS Standard(s) and EU
Directive 2014/53/EU.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Tesla could void your authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Radiation Exposure Statement
The products comply with the FCC/IC RF Exposure for Low Power Consumer Wireless Power Transfer. RF exposure limits are
set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The farthest RF
exposure demonstrated by compliance was at 20cm and farther from the user's body; set the device to low output power if
such function is available.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour unenvironnement non contrôlé.
Déclaration d'exposition aux radiations
Le produit est conforme à l'exposition RF IC pour le transfert de puissance sans fil de consommateurs de faible puissance. La
limite d'exposition RF fixée pour un environnement non contrôlé est sans danger pour le fonctionnement prévu tel que décrit
dans ce manuel. L'exposition RF supplémentaire que la conformité a été démontrée à 20cm et plus de séparation du corps de
l'utilisateur ou de mettre l'appareil à la puissance de sortie inférieure si une telle fonction est disponible.
Radio Frequency Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician to help.
CAUTION: This equipment and its antennas must not be co-located or operated with another antenna or transmitter.
Canada
CAN ICES-3 (B)/NMB-3(B)
Leprésent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareilne doit pas produire de brouillage, et (2) l'utilisateurde
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
lefonctionnement.
642
Owner's Manual
Declarations of Conformity
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour unenvironnement non contrôlé.
Déclaration d'exposition aux radiations:
Le produit est conforme à l'exposition RF IC pour le transfert de puissance sans fil de consommateurs de faible puissance. La
limite d'exposition RF fixée pour un environnement non contrôlé est sans danger pour le fonctionnement prévu tel que décrit
dans ce manuel. L'exposition RF supplémentaire que la conformité a été démontrée à 20cm et plus de séparation du corps de
l'utilisateur ou de mettre l'appareil à la puissance de sortie inférieure si une telle fonction est disponible.
Mexico
IFT-008-SCFI-2015 / NOM-208-SCFI-2016
La operación de este equipo está sujeta a las siguientes dos condiciones:
1. Es posible que este equipo o dispositivo no cause interferencia perjudicial.
2. Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Owner's Manual
643
Overview
Exterior
1. Signature light bar (Lights on page 756)
2. Autopilot cameras (Cameras on page 669)
3. Wiper blade (Windshield Wiper and Washers on page 760)
4. Exterior mirrors (Mirrors on page 753)
5. Front exterior door release button (Doors on page 678)
6. Key card reader (Keys on page 674)
7. Rear exterior door release button (Doors on page 678)
8. Powered frunk (Powered Frunk on page 717)
9. Front tow hooks (Instructions for Transporters on page 938)
10. Front exterior lights (Lights on page 756)
11. Wheels and tires (Wheel and Tire Specifications on page 907)
644
Owner's Manual
Overview
1. Tonneau cover (Cargo Bed on page 720)
2. Cargo bed (Cargo Bed on page 720)
3. Rear-facing camera (Rear-Facing Camera on page 670)
4. Charge port (Charging Instructions on page 872)
5. Exterior cargo bed switch (Accessing the Cargo Bed on page 721)
6. Tow hitch cover (Towing a Trailer on page 784)
7. Tailgate (Cargo Bed on page 720)
Owner's Manual
645
Overview
Interior
1. Interior door open button (Doors on page 678)
2. Blind spot indicator and speaker (#unique_1105 on page )
3. Left scroll button (Left Scroll Button on page 749)
4. Horn (Horn on page 751)
5. Right scroll button (Right Scroll Button on page 751)
6. Touchscreen (Touchscreen on page 647)
7. Secondary drive mode selector on overhead console (Shifting on page 200)
8. Cabin camera (Cabin Camera on page 672)
9. Hazard warning flashers (Hazard Warning Flashers on page 758)
10. Front passenger dome light (Lights on page 756)
CAUTION: Model SModel X is equipped with an in-cabin sensor located near the front passenger dome light to ensure certain
vehicle and safety components are working properly. Do not block or obstruct the sensor. Doing so may cause inaccurate readings,
such as for occupant detection, parking brake engagement, vehicle display settings, etc.
11. Climate control vent (Adjusting the Front and Rear Vents on page 849)
12. Power window switches (Windows on page 682)
13. Manual door release (Opening Doors with No Power on page 950)
14. Brake pedal (Braking and Stopping on page 762)
15. Accelerator pedal (On-Road Modes on page 769)
16. Wireless phone chargers and key card readers (Wireless Phone Chargers on page 661 and Key Card on page 675)
17. Center console (Center Console on page 713)
646
Owner's Manual
Overview
18. Glovebox (Glovebox on page 715)
1. Rear touchscreen (Rear Touchscreen on page 652)
2. Rear climate control vents (Adjusting the Front and Rear Vents on page 849)
3. USB ports (USB-C Ports on page 660)
4. Rear outlet (120V) (Interior Electronics on page 660)
5. Cup holders (Rear Console on page 713)
6. Rear door mechanical release (Opening a Rear Door with No Power on page 950)
NOTE: The door mechnical release should only be used in emergency situations.
Touchscreen
NOTE: Throughout this Owner's Manual, the front touchscreen is referred to as the "touchscreen" whereas the rear
touchscreen is referred to as the "rear touchscreen".
WARNING: Always pay attention to road and traffic conditions when driving. To minimize driver distraction and ensure
the safety of vehicle occupants as well as other road users, avoid using the touchscreen to adjust settings while the
vehicle is in motion.
Owner's Manual
647
Overview
Use the touchscreen to control many features that, in traditional vehicles, are controlled using physical buttons (for example,
adjusting the cabin heating and air conditioning, headlights, etc.). You also use the touchscreen to control media, navigate,
use entertainment features, and customize Model SModel X to suit your preferences. For hands-free access to common
touchscreen controls, use voice commands (see Voice Commands on page 391).
If the touchscreen is unresponsive or demonstrates unusual behavior, you can restart it (see Restarting the Touchscreen on
page 650).
CAUTION: Do not apply a screen protector on the touchscreen. Doing so can result in unintended inputs to the
touchscreen (phantom inputs), delayed response or unresponsiveness to touches, electrostatic discharge which can
damage the touchscreen, etc. Any damage caused by installing a screen protector is not covered by the warranty.
The following shows the touchscreen while Model SModel X is parked.
NOTE: Illustrations are provided to improve conceptual understanding only. Depending on vehicle options, software version,
market region and regional and language settings, the details displayed on the screen will differ.
1. Navigation: Find or navigate to a destination (see Maps and Navigation on page 368).
2. Status bar: This area on the top of the touchscreen displays the time of day, the outside temperature, and more (see Top
Status Bar Icons on page 649).
3. Drive mode strip: Use to shift into Park, Reverse, or Drive. Swipe right from the upper-left side of the screen to display the
drive mode strip (see Shifting on page 200).
NOTE: To shift into Neutral, open Controls, then press and hold the Neutral icon.
4. Vehicle status: This area dynamically displays the current status of Model SModel X as you drive, park, open doors, turn
lights on, etc. Monitor this area when driving as it displays important information such as driving speed and warning
messages (see Vehicle Status on page 654). When in Park, you can interact with the vehicle and open the powered frunk,
tonneau, tailgate, and charge port door, and change the ride height setting. This area is also used for shortcut cards for
media, tire pressures, and trip information.
5. Controls: Control various features and customize Model SModel X to suit your preferences. The Controls screen appears
over the map. Touch an option on the Controls screen to display the various settings and preferences associated with the
chosen option.
648
Owner's Manual
Overview
To search for a specific setting, touch Search at the top of the Controls tab.
When an information icon displays beside a specific setting, touch to display a popup that provides helpful
details about the associated setting.
NOTE: Many vehicle controls, settings, and preferences (such as climate, media, and navigation) can be adjusted handsfree using voice commands (see Voice Commands on page 391).
6. Climate controls (driver): Use the left and right arrows to decrease/increase cabin temperature. Touch Split on the popup to
display separate controls for the driver and passenger. Touch the temperature icon to customize climate control settings
(see Operating Climate Controls on page 844). The passenger climate controls display when temperature controls have
been Split to provide separate controls for the driver and passenger.
7. Map Orientation: Touch to toggle the orientation of the map between North Up and Heading Up (see Maps and Navigation
on page 368).
8. My Apps: For one-touch access to frequently used apps and controls, you can choose what displays here (see Customizing
My Apps on page 653).
9. App Launcher: Touch the app launcher to open the app tray. Then touch any app to open it. The app you choose displays on
top of the map. To close an app, drag it downward or press the X in the corner of the app.
10. Recent App(s): Displays the most recently used app(s). The number of recent apps displayed here depends on how many
apps have been added to My Apps. If you add the maximum number of apps to My Apps, only the most recent app displays.
11. Volume Control: Controls the volume of media player and phone calls (see Volume Controls on page 376). The volume of
navigation instructions is controlled separately (see Maps and Navigation on page 368).
Top Status Bar Icons
Touch to lock/unlock all doors and closures.
Displays the local weather conditions. Touch to display more detailed information about the weather and air
quality, including chance of rain, humidity, and UV index. Requires premium connectivity.
Displays the current temperature. If your vehicle is equipped with premium connectivity, you can also touch to
display more detailed information about the weather and air quality, including chance of rain, humidity, and UV
index.
Displays on the touchscreen status bar only when Model SModel X detects that the local Air Quality Index (AQI)
value is poor. A poor AQI will have yellow, orange, red, purple, or maroon numbers. Touch to display more
detailed information about the weather and air quality, including chance of rain, humidity, and UV index.
Requires premium connectivity.
4:20 pm
Your vehicle automatically updates the time. If the time is incorrect, confirm your vehicle has internet and GPS
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.26.3_SX_0724.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-31
MFR Internal Campaign ID/Software Version: 2024.26.3
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.