NHTSA ID Number: 11005738
Manufacturer Communication Number: 2024.26.3_0724.pdf
TSB/Document Date: 2024-08-06
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
96
Owner's Manual
Owners Manual
Voice Commands
NOTE: For your convenience, Tesla allows you to choose from a variety of languages to use for voice commands. To choose a
different language, touch Controls > Display > Voice Recognition Language.
Use voice commands to easily control settings and preferences without using the touchscreen. Voice commands are designed
to understand natural requests. The following is a non-exhaustive list of actions that you can perform with voice commands:
• Adjust climate preferences
• Tweak the windshield wiper speed and frequency
• Control various aspects of your vehicle
• Navigate to a location
• Call a contact
• Interact with apps and settings
To initiate a voice command, press and release the right scroll wheel button on the steering wheelsteering yoke (or steering
wheel)press and release the right scroll wheel button on the steering wheelsteering yoke (or steering wheel)fully press the
microphone button on the right side of the steering wheelsteering yoke (or steering wheel)fully press the microphone button
on the right side of the steering wheelsteering yoke (or steering wheel)touch the voice button on the right side of the steering
wheelsteering yoke (or steering wheel). When a chime sounds, make your request.
Owner's Manual
97
Owners Manual
98
Owner's Manual
Owners Manual
Examples of Voice Commands
Here is a list of example voice commands. This is not an exhaustive list. Tesla is constantly working to improve voice
commands.
NOTE: Your vehicle must be in Park to enable some voice commands (such as Sentry Mode, Dog Mode, etc.).
Climate Controls
Adjust your climate preferences:
• "Make it cooler"
• "Make it warmer"
• "Turn on/off the driver's seat heater"
• "Cool down the passenger"
• "Direct airflow to my face"
Owner's Manual
99
Owners Manual
• "Sync climate"
• "Increase/decrease the fan speed"
• "Turn on/off rear defroster"
• "Set the temperature/fan..."
• "Turn on recirculate"
Windshield Wipers
Update the windshield wiper speed and frequency based on changing road and weather conditions:
• "Speed up the wipers"
• "Speed up the wiper"
• "Turn on/off the wiper"
• "Increase/decrease windshield wiper speed by..."
• "Turn on/off the wipers"
Vehicle Controls
Modify various controls in your vehicle:
• "Sentry Mode on/off"
• "Keep my car safe"
• "Keep my truck safe"
• "Lock/unlock the doors"
• "Turn on Dog Mode"
• "Fold/unfold the mirrors"
• "Open/close charge port"
• "Start/stop charging"
• "Open service settings"
• "Open the glovebox"
Navigation
Search for or navigate to a location:
• "Where is [location]?"
• "Drive to [location]"
• "Navigate to [location]"
• "Show nearby Superchargers"
• "I'm feeling hungry/lucky" (see Maps and Navigation on page 704).
• "Stop navigation"
• "Mute voice guidance"
If you have defined a navigation address for your home or work locations, you can use a voice command to navigate there by
saying "Navigate home" or "Take me to work".
Contacts
To call or text a contact on your Bluetooth-connected phone (see Phone, Calendar, and Web Conferencing on page 363), say:
• "Call [contact name/phone number]"
100
Owner's Manual
Owners Manual
• "Text [contact name/phone number]"
Media
Listen to media and adjust your playback preferences:
• "Listen to [song name]"
• "Lower/raise the volume"
• "Skip to next"
• "Pause/play song"
• "Change the source to [media source]"
To improve voice command recognition accuracy, provide multiple cues in your command, such as artist and song.
Apps and Settings
Easily navigate through your apps and settings:
• "Open [Toybox/browser/theater/phone]"
• "Search for..."
• "The screen is too bright"
• "Show me the Owner's Manual"
You can also file a bug report by saying "Report" , "Feedback", or "Bug report".
For more information on voice commands, go to https://www.tesla.com/support/voice-commands.
NOTE: To support ongoing quality improvements, Tesla captures and processes voice command transcriptions (such as “set
the temperature…”). Audio voice recordings are not collected, and transcriptions are not associated with your Tesla account or
with your vehicle's identification number. To further protect your privacy, voice commands containing personal data are not
captured (such as "Navigate to..." or "Make a call to...").
Cameras
Your CybertruckModel SModel XModel 3Model Y includes the following components that actively monitor the surrounding
area:
Owner's Manual
101
Owners Manual
1. Ultrasonic sensors are located in the front and rear bumpers.
2. A forward looking camera is mounted on the windshield above the rear view mirror.
3. Radar is mounted in the front grill. Radar is mounted behind the front bumper on the left side of the vehicle. Radar is
mounted behind the front bumper on the right side of the vehicle.
102
Owner's Manual
Owners Manual
Owner's Manual
103
Owners Manual
104
Owner's Manual
Owners Manual
1. A camera is mounted above the rear license plate.
2. Ultrasonic sensors (if equipped) are located in the front and rear bumpers.
3. A camera is mounted in each door pillar.
4. Three cameras are mounted to the windshield above the rear view mirror.
5. Two cameras are mounted to the windshield above the rear view mirror.
6. A camera is mounted to each front fender.
7. Radar (if equipped) is mounted behind the front bumper.
1. A camera is mounted above the rear license plate.
Owner's Manual
105
Owners Manual
2. Ultrasonic sensors (if equipped) are located in the front and rear bumpers.
3. A camera is mounted in each door pillar.
4. Three cameras are mounted to the windshield above the rear view mirror.
5. A camera is mounted to each front fender.
6. Radar (if equipped) is mounted behind the front bumper.
• A camera is mounted above the rear license plate.
• A camera is mounted in each door pillar.
• Two cameras are mounted to the windshield above the rear view mirror.
• A camera is mounted to each front fender.
CybertruckModel SModel XModel 3Model Y is also equipped with high precision electronically-assisted braking and steering
systems.
Cabin Camera
Your CybertruckModel SModel XModel 3Model Y may be equipped with a cabin camera located above the rear view mirror.
For more information, see Cabin Camera on page 656.
Your CybertruckModel SModel XModel 3Model Y may be equipped with a cabin camera located above the rear view mirror.
For more information, see Cabin Camera on page 656.
Your CybertruckModel SModel XModel 3Model Y is equipped with a cabin camera located above the rear view mirror. For
more information, see Cabin Camera on page 656.
Your CybertruckModel SModel XModel 3Model Y is equipped with a cabin camera located above the rear view mirror. For
more information, see Cabin Camera on page 656.
106
Owner's Manual
Owners Manual
Owner's Manual
107
Owners Manual
Drive to Calibrate Cameras
CybertruckModel SModel XModel 3Model Y must maneuver with precision when Autopilot features are being used.
Therefore, before some features such as Lane Departure Avoidance and Automatic Emergency Braking can be used for the
first time or after some types of service repairs, cameras must complete a self-calibration process. For your convenience, the
instrument paneltouchscreen displays a progress indicator.
When calibration is complete, Autopilot features, as well as Active Safety features, are available for use. Calibration typically
completes after driving 20-25 miles (32-40 km), but the distance varies depending on road and environmental conditions. For
example, calibration completes quicker when driving on a straight road with multiple lanes (such as a controlled-access
highway), with highly-visible lane markings (in the driving lane as well as the adjacent lanes). Contact Tesla only if your
CybertruckModel SModel XModel 3Model Y has not completed the calibration process after driving 100 miles (160 km) in the
described conditions.
If a camera has shifted from its calibrated position (for example, the camera or windshield was replaced), you must clear the
calibration. To do so, touch Controls > Service > Camera Calibration > Clear Calibration. When the calibration is cleared,
CybertruckModel SModel XModel 3Model Y repeats the calibration process. While this helps re-calibrate the cameras in
many cases, Clear Calibration may not resolve all camera and sensor concerns.
NOTE: The self-calibration drive process is only applicable to CybertruckModel SModel XModel 3Model Y vehicles built after
approximately October 12, 2016.
NOTE: To calibrate, cameras require highly-visible lane markings in both the driving lane and adjacent lanes (at least two lanes
over on each side of the vehicle). For best results, drive in the middle lane of a multi-lane highway (ideally with at least five
lanes) that has clear lane markings and minimal traffic.
NOTE: If you attempt to use a feature that is not available until the calibration process is complete, the feature is disabled and
the instrument paneltouchscreen displays a message.
NOTE: CybertruckModel SModel XModel 3Model Y must repeat the calibration process if the cameras are serviced by Tesla,
and in some cases, after a software update.
Keeping Cameras Free of Obstructions
Ensure all cameras are clean and free of obstructions before each drive and before using Autopilot features (see Cleaning a
Camera on page 783Cleaning a Camera on page 783Cleaning a Camera on page 783Cleaning a Camera on page
784Cleaning a Camera on page 1144). Dirty cameras and sensors (if equipped), as well as environmental conditions such as
rain and faded lane markings, can affect Autopilot performance. If a camera is obstructed or blinded,
CybertruckModel SModel XModel 3Model Y displays a message on the instrument clustertouchscreen and Autopilot features
may not be available. For more information on specific alerts, see Troubleshooting Alerts on page 956Troubleshooting Alerts
on page 1013.
108
Owner's Manual
Owners Manual
Condensation can form inside the camera enclosures, especially if you park your vehicle outside in cold or wet conditions. The
instrument clustertouchscreen may display an alert stating that a camera is blocked and that some or all Autopilot features
may be temporarily restricted until the camera vision is clear. To proactively dry the condensation, precondition the cabin by
setting it to a warm temperature, turning the windshield defroster on, and directing the front air vents toward the door pillars
(see Mobile App on page 355).
Opening and Closing
Keys
Types of Keys
CybertruckModel SModel XModel 3Model Y supports the following types of keys:
• Phone key - You can set up your personal phone as a "phone key" that communicates with
CybertruckModel SModel XModel 3Model Y using Bluetooth. A phone key supports automatic locking and unlocking.
• Key card - Tesla provides two key cards that communicate with CybertruckModel SModel XModel 3Model Y using short
range radio-frequency identification (RFID) signals. The key card is used to "authenticate" phone keys to work with
CybertruckModel SModel XModel 3Model Y and to add or remove other keys. Unlike the phone key and key fobs, the key
card does not support automatic locking and unlocking. In situations where your phone key has a dead battery, or is lost or
stolen, use your key card to unlock, drive, and lock CybertruckModel SModel XModel 3Model Y.
• Key fob - The key fob (if equipped) allows you to press buttons to open the front and rear trunks, and unlock, lock, and
drive CybertruckModel SModel XModel 3Model Y. The key fob also supports automatic locking and unlocking, if available
in your region (see Walk-Away Door Lock on page 141) and can be used as a backup to your phone key.
CybertruckModel SModel XModel 3Model Y supports a total of 19 keys, which can include phone keys, key cards, and up to
four key fobs.
CAUTION: Remember to bring a key with you when you drive. Although you can drive CybertruckModel SModel XModel
3Model Y away from its key, you will be unable to power it back on after it powers off.
Phone Key
CAUTION: Do not leave your paired phone in your vehicle (for example, if you are hiking or at the beach). If you must
leave your phone in the vehicle, disable Bluetooth and/or turn the phone off.
Using your phone as a key is a convenient way to access your CybertruckModel SModel XModel 3Model Y. As you approach,
your phone's Bluetooth signal is detected and the doors unlock when you press a door handle when you pull a door handle.
Likewise, when you exit and walk away with the phone key, doors automatically lock (provided the Walk-Away Door Lock
feature is turned on; see Walk-Away Door Lock on page 141).
Before you can use a phone to access CybertruckModel SModel XModel 3Model Y, follow these steps to authenticate it:
1. Download the Tesla mobile app to your phone.
2. Log into the Tesla mobile app using your Tesla account username and password.
NOTE: You must remain logged in to your Tesla account to use your phone to access CybertruckModel SModel XModel
3Model Y.
NOTE: If multiple vehicles are linked to your Tesla account, you must ensure that the vehicle you want the mobile app to
access is currently selected on the mobile app.
3. Ensure:
◦ Your phone's general Bluetooth settings are enabled.
◦ Bluetooth is enabled within your phone's settings for the Tesla mobile app. For example, on your phone, navigate to
Settings, choose the Tesla mobile app, and ensure the Bluetooth setting is turned on.
◦ Access to your location is enabled. Open the Tesla mobile app in your phone's settings and select Location > Always.
For the best experience, keep the mobile app running in the background.
◦ Allow Mobile Access is enabled on the vehicle touchscreen (Controls > Safety > Allow Mobile Access).
Owner's Manual
109
Owners Manual
NOTE: CybertruckModel SModel XModel 3Model Y communicates with your phone using Bluetooth. Keep in mind that
your phone must have enough battery power to run Bluetooth and that many phones disable Bluetooth when the battery is
low.
4. While inside or near the vehicle, open the Tesla mobile app and touch Set Up Phone Key on the main screen, or navigate to
Security > Set Up Phone Key. Follow the prompts on the mobile app and vehicle touchscreen to set up your phone key.
To view a list of keys that can currently access CybertruckModel SModel XModel 3Model Y, or to remove a phone key, touch
Controls > Locks (see Managing Keys on page 126).
CybertruckModel SModel XModel 3Model Y can connect to three phone keys simultaneously. Therefore, if more than three
phone keys are detected and you want to authenticate or pair a different phone, move the other connected phone key(s) out of
range or turn off its Bluetooth setting.
Once a phone has been authenticated, it no longer requires an internet connection to be used as a phone key for
CybertruckModel SModel XModel 3Model Y. However, to use the phone hands-free, access your phone's contacts, play
media from it, etc., you must also pair it and connect it as a Bluetooth device (see Bluetooth on page 360).
Some smartphones with NFC capability can be used to lock/unlock your vehicle, just like using a key card. Ensure the Tesla
mobile app is correctly paired to your vehicle and enable the NFC function on your phone. Once enabled, simply hold the
phone to the driver's side door pillar to lock or unlock the door. Refer to your smartphone's instructions for specific
information on how to do this.
Key Card
Tesla provides you with two CybertruckModel SModel XModel 3Model Y key cards, designed to fit in your wallet.
To use a key card to unlock or lock CybertruckModel SModel XModel 3Model Y, position the card as shown and tap it against
the card reader located just below the Autopilot camera on the driver's side door pillar. When
CybertruckModel SModel XModel 3Model Y detects the key card, the exterior lights flash, the mirrors unfold or fold (if Fold
Mirrors is on), the horn sounds (if Lock Confirmation Sound is on), and the doors unlock or lock.
NOTE: You may need to physically touch the center console or driver's side door pillar with the key card, and you may need to
hold it against the transmitter for one or two seconds.
110
Owner's Manual
Owners Manual
Once inside, power up CybertruckModel SModel XModel 3Model Y by pressing the brake pedal within two minutes of
scanning the key card (see Starting and Powering Off on page 373Starting and Powering Off on page 369Starting and
Powering Off on page 369Starting and Powering Off on page 369). If you wait longer than two minutes, you must reauthenticate by placing the key card near the card reader located behind the cup holders on the center console. When your
key card is detected, your two minute authentication period restarts.
NOTE: If enabled, Walk-Away Door Lock (see Walk-Away Door Lock on page 141) operates only when you walk away using a
phone key or key fob. When you walk away carrying your key card, CybertruckModel SModel XModel 3Model Y does not
automatically unlock/lock.
CAUTION: Always carry your key card with you in your purse or wallet to use as a backup in case your authenticated
phone has a dead battery, or is lost or stolen.
Key Card
Tesla provides you with two CybertruckModel SModel XModel 3Model Y key cards, designed to fit in your wallet.
To use a key card to unlock or lock CybertruckModel SModel XModel 3Model Y, position the card as shown and tap it against
the card reader located just below the Autopilot camera on the driver's side door pillar. When
CybertruckModel SModel XModel 3Model Y detects the key card, the exterior lights flash, the mirrors unfold or fold (if Fold
Mirrors is on), the horn sounds (if Lock Confirmation Sound is on), and the doors unlock or lock.
NOTE: You may need to physically touch the center console or driver's side door pillar with the key card, and you may need to
hold it against the transmitter for one or two seconds.
Owner's Manual
111
Owners Manual
Once inside, power up CybertruckModel SModel XModel 3Model Y by pressing the brake pedal within two minutes of
scanning the key card (see Starting and Powering Off on page 369). If you wait longer than two minutes, you must reauthenticate by placing the key card near the card reader located behind the cup holders on the center console. When your
key card is detected, your two minute authentication period restarts.
NOTE: If enabled, Walk-Away Door Lock (see Walk-Away Door Lock on page 141) operates only when you walk away using a
phone key or key fob. When you walk away carrying your key card, CybertruckModel SModel XModel 3Model Y does not
automatically unlock/lock.
CAUTION: Always carry your key card with you in your purse or wallet to use as a backup in case your authenticated
phone has a dead battery, or is lost or stolen.
Key Card
Tesla provides you with two CybertruckModel SModel XModel 3Model Y key cards, designed to fit in your wallet.
To use a key card to unlock or lock CybertruckModel SModel XModel 3Model Y, position the card as shown and tap it against
the card reader located approximately one third the way up of the driver's side door pillar. When
CybertruckModel SModel XModel 3Model Y detects the key card, the exterior lights flash, the mirrors unfold or fold (if Fold
Mirrors is on), the horn sounds (if Lock Confirmation Sound is on), and the doors unlock or lock.
NOTE: You may need to physically touch the wireless phone charger or driver's side door pillar with the key card, and you may
need to hold it against the transmitter for one or two seconds.
112
Owner's Manual
Owners Manual
Owner's Manual
113
Owners Manual
Once inside, power up CybertruckModel SModel XModel 3Model Y by pressing the brake pedal within two minutes of
scanning the key card (see Starting and Powering Off on page 373). If you wait longer than two minutes, you must reauthenticate by placing the key card near the card reader located in the wireless phone charger on the center console. When
your key card is detected, your two minute authentication period restarts.
114
Owner's Manual
Owners Manual
NOTE: If enabled, Walk-Away Door Lock (see Walk-Away Door Lock on page 141) operates only when you walk away using a
phone key or passive key fob. When you walk away carrying your key card, CybertruckModel SModel XModel 3Model Y does
not automatically unlock/lock.
Key Card
Tesla provides you with two CybertruckModel SModel XModel 3Model Y key cards, designed to fit in your wallet.
To use a key card to unlock or lock CybertruckModel SModel XModel 3Model Y, position the card as shown and tap it against
the card reader located approximately one third the way up of the driver's side door pillar. When
CybertruckModel SModel XModel 3Model Y detects the key card, the exterior lights flash, the mirrors unfold or fold (if Fold
Mirrors is on), the horn sounds (if Lock Confirmation Sound is on), and the doors unlock or lock.
NOTE: You may need to physically touch the wireless phone charger or driver's side door pillar with the key card, and you may
need to hold it against the transmitter for one or two seconds.
Owner's Manual
115
Owners Manual
Once inside, power up CybertruckModel SModel XModel 3Model Y by pressing the brake pedal within two minutes of
scanning the key card (see Starting and Powering Off on page 373). If you wait longer than two minutes, you must reauthenticate by placing the key card near the card reader located in the wireless phone charger on the center console. When
your key card is detected, your two minute authentication period restarts.
116
Owner's Manual
Owners Manual
NOTE: If enabled, Walk-Away Door Lock (see Walk-Away Door Lock on page 141) operates only when you walk away using a
phone key or key fob. When you walk away carrying your key card, CybertruckModel SModel XModel 3Model Y does not
automatically unlock/lock.
Key Fob
If you have purchased the key fob accessory, you can quickly familiarize yourself with this key by thinking of it as a miniature
version of CybertruckModel SModel XModel 3Model Y, with the Tesla badge representing the front. The key has three
buttons that feel like softer areas on the surface.
Owner's Manual
117
Owners Manual
1. Front trunk - Double-click to unlatch the front trunk.
2. Lock/Unlock All - Single-click to lock doors and trunks (all doors and trunks must be closed). Double-click to unlock doors
and trunks.
3. Rear trunk - Double-click to unlatch the rear trunk. Hold down for one to two seconds to open the charge port door.
Once inside, power up CybertruckModel SModel XModel 3Model Y by pressing the brake pedal within two minutes of
pressing the unlock button on the key fob (see Starting and Powering Off on page 369). If you wait longer than two minutes,
you must press the unlock button again, or place the key fob near the card reader located behind the cup holders on the
center console. When your key fob is detected, the two minute authentication period restarts.
When approaching or leaving CybertruckModel SModel XModel 3Model Y carrying the key fob, you do not need to point the
key fob at CybertruckModel SModel XModel 3Model Y as you press a button, but you must be within operating range.
Radio equipment on a similar frequency can affect the key. If this happens, move the key at least one foot (30 cm) away from
other electronic devices (phones, laptops, etc.).
In the event that the key fob's battery is dead, you can still use it to drive the vehicle by scanning the key fob on the card
reader located on the driver's side door pillar (like the key card).
Instructions for changing the battery are provided in Replacing the Key Fob Battery on page 119.
NOTE: You can use the same key fob with multiple CybertruckModel SModel XModel 3Model Y vehicles provided you
authenticate it (see Managing Keys on page 126). However, key fob works with only one CybertruckModel SModel XModel
3Model Y at a time. Therefore, to use a key fob for a different CybertruckModel SModel XModel 3Model Y, touch its flat side
against the card reader on the driver's side door pillar.
NOTE: CybertruckModel SModel XModel 3Model Y supports up to four different key fobs.
CAUTION: Protect the key from impact, high temperatures, and damage from liquids. Avoid contact with solvents,
waxes, and abrasive cleaners.
Passive Locking and Unlocking
Locking and unlocking CybertruckModel SModel XModel 3Model Y with your key fob is conveniently hands-free. Although
you must be carrying a paired key fob, there is no need to use it. CybertruckModel SModel XModel 3Model Y has sensors
around the vehicle that can recognize the presence of a key fob within a range of approximately six feet (two meters).
Therefore, you can keep your key fob in your pocket or purse and simply pull on the door handle to unlock. When carrying your
key fob with you, you can also open the trunk without having to use the key by pressing the liftgaterear trunk's exterior door
handle. If Walk-Away Door Lock is enabled, CybertruckModel SModel XModel 3Model Y automatically locks when you exit and
the key fob is no longer in range (see Walk-Away Door Lock on page 141). Passive locking and unlocking is automatically
enabled when you pair your key fob to CybertruckModel SModel XModel 3Model Y.
118
Owner's Manual
Owners Manual
Although you can use the same key fob with multiple vehicles, it can only be paired to one vehicle at a time. To activate a
paired key fob to a different vehicle, touch the flat side onto the driver's side door pillar and click any button on the key fob to
confirm.
NOTE: For increased security, passive locking and unlocking disables after being stationary for five minutes while within
vehicle range when the vehicle is not in use (for example, you are standing outside your vehicle). In this situation, you must
shake or press a button on the key fob to re-enable passive locking and unlocking.
Replacing the Key Fob Battery
Under normal use, the accessory key fob has a battery that lasts for up to one year, depending on key fob version and selected
vehicle settings. When the battery is low, a message displays on the touchscreen.
To replace the key fob battery:
1. With the key fob placed button side down on a soft surface, release the bottom cover, using a small flat-bladed tool.
2. Remove the battery by lifting it away from the retaining clips.
3. While avoiding touching the battery's flat surfaces, insert the new battery (type CR2032 ) with the ‘+’ side facing up.
NOTE: Wipe the battery clean before fitting and avoid touching the battery's flat surfaces. Finger marks on the flat surfaces
of the battery can reduce battery life.
NOTE: CR2032 batteries can be purchased from any retailer that sells batteries.
4. Holding the bottom cover at an angle, align the tabs on the cover with the corresponding slots on the key fob, then press
the cover firmly onto the key fob until it snaps into place.
5. Test that the key fob works by unlocking and locking CybertruckModel SModel XModel 3Model Y.
WARNING: Key fob batteries contain a chemical burn hazard and should not be ingested. The key fob contains a coin cell
battery. If the coin cell battery is swallowed, it can cause severe internal burns within two hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the
product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
Key Fob
NOTE: Depending on market region, vehicle configuration, or date of manufacture, your vehicle may not come with a key fob.
Go to http://shop.tesla.com for more information.
You can quickly familiarize yourself with the key fob by thinking of it as a miniature version of
CybertruckModel SModel XModel 3Model Y, with the Tesla badge representing the front. The key has buttons that feel like
softer areas on the surface.
Owner's Manual
119
Owners Manual
1. Rear trunk - Double-click to open or close the rear trunk. Hold down for one to two seconds to open the charge port door.
2. Lock/Unlock All - Single-click to lock doors and trunks (all doors and trunks must be closed). Double-click to unlock doors
and trunks.
3. Front trunk - Double-click to unlatch the front trunk.
1. Trunk
◦ Double-click to open or close the rear trunk.
◦ If equipped with a powered liftgate, double-click to unlatch the rear trunk. You can also single-click to stop the liftgate
when it is moving.
◦ Hold the button down for one to two seconds to open the charge port door.
2. Lock/Unlock All
◦ Single-click to lock all doors and rear trunk. Hazard warning lights flash once.
NOTE: If a door or the rear trunk is open, hazard warning lights flash three times and doors do not lock. But you can
enable a single-click to both close all doors (and rear trunk) and lock them, by turning on the Close All with Key Fob
setting (touch Controls > Locks > Close All with Key Fob). By default, this setting is turned off and you must triple-click
the button to close and lock all doors.
120
Owner's Manual
Owners Manual
◦ Double-click to unlock. Hazard warning lights flash twice.
NOTE: If Automatic Doors is enabled (touch Controls > Locks > Automatic Doors), doors unlock and the driver's door
opens as you approach Model X. A subsequent double-click opens the passenger front door.
3. Front trunk
◦ Double-click to unlatch the front trunk.
4. Falcon wing doors
◦ Double-click to open/close the associated falcon wing door.
◦ Single-click to stop movement of the associated falcon wing door. Subsequently double-clicking reverses movement of
the falcon wing door. For example if the door was opening, it closes, and vice versa.
NOTE: Falcon wing doors are designed to proactively detect obstacles that prevent the doors from moving when an obstacle is
detected.
WARNING: Model X falcon wing doors have several sensors to detect the presence of an object in the door's path. In
most cases, when an object is detected, the door stops moving. However, the sensors are unable to detect all areas
under all circumstances, particularly when closing, Therefore, you must monitor the movement of falcon wing doors to
ensure the door's path of movement is free of obstacles, staying prepared at all times to proactively intervene to stop
the door from contacting an object (including a person). Failure to do so can cause serious damage or bodily injury.
Once inside, power up CybertruckModel SModel XModel 3Model Y by pressing the brake pedal within two minutes of
pressing the unlock button on the key fob (see Starting and Powering Off on page 373). If you wait longer than two minutes,
you must press the unlock button again, or place the key fob near the card reader located in the lower half of the left wireless
phone charger, facing downward, on the center console. When your key fob is detected, the two minute authentication period
restarts.
When approaching or leaving CybertruckModel SModel XModel 3Model Y carrying the key fob, you do not need to point the
key fob at CybertruckModel SModel XModel 3Model Y as you press a button, but you must be within operating range.
Radio equipment on a similar frequency can affect the key. If this happens, move the key at least one foot (30 cm) away from
other electronic devices (phones, laptops, etc.).
In the event that the key fob's battery is dead, you can still use it. To unlock the vehicle, scan the key fob on the card reader
located on the driver's side door pillar (like the key card).
Owner's Manual
121
Owners Manual
To drive the vehicle, scan the key fob on the phone charger.
1. Place it at the top of the left phone charger, against the center divider.
2. Point the front of the key fob down.
3. Swipe downwards.
1. Place it at the top of the left phone charger, against the center divider.
2. Point the front of the key fob to the left.
3. Swipe downwards.
122
Owner's Manual
Owners Manual
Instructions for changing the battery are provided in Replacing the Key Fob Battery on page 123.
NOTE: You can use the same key fob with multiple CybertruckModel SModel XModel 3Model Y vehicles provided you
authenticate it (see Managing Keys on page 126). However, key fob works with only one CybertruckModel SModel XModel
3Model Y at a time. Therefore, to use a key fob for a different CybertruckModel SModel XModel 3Model Y, touch its flat side
against the card reader on the driver's side door pillar.
NOTE: CybertruckModel SModel XModel 3Model Y supports up to four different key fobs.
CAUTION: Protect the key from impact, high temperatures, and damage from liquids. Avoid contact with solvents,
waxes, and abrasive cleaners.
Passive Locking and Unlocking
Locking and unlocking CybertruckModel SModel XModel 3Model Y with your key fob is conveniently hands-free. Although
you must be carrying a paired key fob, there is no need to use it. CybertruckModel SModel XModel 3Model Y has sensors
around the vehicle that can recognize the presence of a key fob within a range of approximately six feet (two meters).
Therefore, you can keep your key fob in your pocket or purse and press the door handle to unlock and extend the handle.
When carrying your key fob with you, you can also open the trunk without having to use the key by pressing the liftgaterear
trunk's exterior switch. If Walk-Away Door Lock is enabled, CybertruckModel SModel XModel 3Model Y automatically locks
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.26.3_0724.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-31
MFR Internal Campaign ID/Software Version: 2024.26.3
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.