Loading...

NHTSA ID Number: 11005679

Manufacturer Communication Number: CB24-L-001

TSB/Document Date: 2024-08-05


Summary

CUSTOMER SATISFACATION CAMPAIGN_ ISUZUeBay logo HAS DETERMINED THAT CERTAIN 2022 – 2024MY ISUZU N-SERIES VEHICLES EQUIPPED WITH 5.2L (4HK1) DIESEL ENGINES AND OPTION (IE1) 4-WHEEL DISC BRAKES WERE BUILT WITH AN ENGINE CONTROL MODULE (ECM) AND DIESEL EXHAUST FLUID CONTROL UNIT (DCU) CONTAINING AN ON BOARD DIAGNOSTIC (OBD) CALIBRATION ERROR FOR DIAGNOSTIC TROUBLE CODES (DTC) P2201 NOX SENSOR CIRCUIT PERFORMANCE SENSOR 1 AND P20EE DIESEL EXHAUST FLUID (DEF) SYSTEM NOX TRAP LOW EFFICIENCY.


IMPORTANT SERVICE
INFORMATION FOR:
 SERVICE MANAGER
 SERVICE ADVISOR
 TECHNICIAN
 PARTS DEPARTMENT
 WARRANTY PERSONNEL

BULLETIN NUMBER:
CB24-L-001
ISSUE DATE:
JULY 2024
GROUP:
FUEL & EXHAUST

CUSTOMER SATISFACTION CAMPAIGN
P2201/P20EE CALIBRATION ERROR –
REPROGRAM ECM AND DCU (V2403)
AFFECTED VEHICLES

2022 – 2024MY N-Series Vehicles Equipped with 5.2L (4HK1)
Diesel Engines and Option (IE1) 4-Wheel Disc Brakes
INFORMATION

CONDITION
We have determined that certain 2022 – 2024MY Isuzu N-Series vehicles equipped with
5.2L (4HK1) diesel engines and option (IE1) 4-wheel disc brakes were built with an Engine
Control Module (ECM) and Diesel Exhaust Fluid Control Unit (DCU) containing an On
Board Diagnostic (OBD) calibration error for Diagnostic Trouble Codes (DTC) P2201 NOx
Sensor Circuit Performance Sensor 1 and P20EE Diesel Exhaust Fluid (DEF) System
NOx Trap Low Efficiency.
CORRECTION
Consistent with the table found in Step 2 of the Service Procedure below, Isuzu dealers
are to reprogram the ECM and/or the DCU with the corrected service calibrations. This
service will be performed free of charge.
VEHICLES INVOLVED
Involved are certain 2022 – 2024MY Isuzu N-Series vehicles equipped with 5.2L (4HK1)
diesel engines and option (IE1) 4-wheel disc brakes.
NOTE: Dealers are to confirm vehicle eligibility prior to beginning repairs by using the
Isuzu Vehicle Information System (IVIS).
For dealers with involved vehicles, a report of involved vehicles containing the complete
vehicle identification number has been or will be provided. Dealers will not have a report
available if they have no involved vehicles currently assigned.

SERVICE PROCEDURE
1. Look up the VIN in the Isuzu Vehicle Information System (IVIS) and confirm the
vehicle is affected by this campaign.
2. Using the Isuzu Diagnostic Service System (IDSS) version 15.5.8. or later, check
the ECM and DCU calibration part numbers. If the calibration part numbers do
NOT match the calibration numbers listed in the table below, reprogram both the
ECM and the DCU. However, if only one calibration part number does not match,
only reprogram the corresponding module.
MY

Vehicle

Engine

ECM
Calibration #

DCU Calibration #

2022i

N-Series

5.2L

55243970

55243971

2023-2024
w/o ADAS

N-Series

5.2L

55243972

55243974

2023-2024
with ADAS

N-Series

5.2L

55243973

55243974

NOTE: If the ECM and DCU are already calibrated to the calibration numbers above
and DTC P2201 and/or P20EE are still setting, follow the Intermittent Conditions
diagnostics in the applicable Workshop Manual. Ensure that DTC P2201 and/or
P20EE are cleared after the ECM and/or the DCU have been reprogrammed.
NOTE: If any DTCs other than DTC P2201 and/or P20EE are found, make a note on
the RO and consult with the customer. The repairs associated with DTCs other
than DTC P2201 and/or P20EE are not covered by this campaign (though the repair
may still be covered under the New Vehicle Warranty).
3. Proceed to Applying the Campaign Label.
APPLYING THE CAMPAIGN LABEL
4. Using a ball-point pen, fill in a campaign label (Part No. 2-90028-700-0) with
Campaign Number V2403, Isuzu dealer code, and repair date.
5. Affix the campaign label onto the driver's side B-pillar.

2

CAMPAIGN CLAIM INFORMATION
Refer to the Isuzu ICS Claims Processing Manual for details on Campaign Claim
Submission. Submit only one claim as indicated below.
NOTE: Failure to submit campaign claims in a timely manner may result in delayed
payment. Accepted/Paid claims will change campaign status to “Closed” in IVIS.
Submit claims as quickly as possible in order to close the campaign and ensure
payment.
LABOR CODE
V2403

DESCRIPTION
DTC P2201 and/or P20EE ECM & DCU
Calibration Reprogram

LABOR
HOURS
0.8

*Includes 0.1 hours for administrative allowance.
DEALER RESPONSIBILITY
All vehicles in dealers' possession and subject to this customer satisfaction campaign
must be held and repaired per the service procedure of this campaign bulletin before
customers take possession of these vehicles.
Customers who have recently purchased vehicles sold from your vehicle inventory, and
for which there is no customer information indicated on the dealer listing, are to be
contacted by the dealer. Arrangements are to be made to make the required correction
according to the instructions contained in this bulletin. A copy of the customer letter is
provided in this bulletin for your use in contacting customers. Program follow-up cards
should not be used for this purpose, since the customer may not as yet have received the
notification letter.
In summary, whenever a vehicle subject to this customer satisfaction campaign enters
your vehicle inventory, or is in your dealership, you must take the steps necessary to be
sure the campaign correction has been made before selling or releasing the vehicle.
OWNER NOTIFICATION
Samples of the customer satisfaction campaign letters that are being sent to owners of
affected vehicles already retailed in the United States and Canada are attached below.

3

[SAMPLE OWNER LETTER – US]

CUSTOMER SATISFACTION CAMPAIGN
Campaign V2403

This notice applies to your vehicle,

JULY 2024

Dear Customer,
The purpose of this notice is to inform you that IsuzueBay logo Commercial Truck of America, Inc. is
conducting a customer satisfaction campaign that affects 2022 – 2024 model year IsuzueBay logo N-Series
trucks equipped with 5.2L (4HK1) diesel engines and option (IE1) 4-wheel disc brakes.
WHAT IS THE CONDITION?
We have determined that certain 2022 – 2024MY Isuzu N-Series vehicles equipped with 5.2L
(4HK1) diesel engines and option (IE1) 4-wheel disc brakes were built with an Engine Control
Module (ECM) and Diesel Exhaust Fluid Control Unit (DCU) containing an On Board Diagnostic
(OBD) calibration error for Diagnostic Trouble Codes (DTC) P2201 NOx Sensor Circuit
Performance Sensor 1 and P20EE Diesel Exhaust Fluid (DEF) System NOx Trap Low Efficiency.
WHAT WE WILL DO
Isuzu dealers are to reprogram the ECM and/or the DCU with the corrected service calibrations.
This service will be performed free of charge.
WHAT YOU SHOULD DO
We recommend you contact your IsuzueBay logo dealer to schedule an appointment to bring your vehicle in
to have this service performed. Present this Owner Notification Letter at the time of your
appointment or refer to Customer Satisfaction Campaign Bulletin CB24-L-001. We estimate this
service may take approximately 48 minutes to perform. Additional time may be necessary
depending on how appointments are scheduled and processed at your dealership. To locate your
nearest dealer please use the dealer locator on our website at www.isuzucv.com.
REIMBURSEMENT
If you have already paid for repairs to address the condition covered by this Customer Satisfaction
Campaign, you may be eligible to have those costs reimbursed. The enclosed form explains the
terms under which reimbursement may be available and how to request reimbursement. For
example, you will need to provide the original or a clear copy of the paid receipt or invoice
verifying the repair and the costs of that repair, in addition to other required information.
If you have questions or concerns, please contact our Customer Relations Department at 1-866441-9638.
We regret any inconvenience this action may cause you.
Sincerely,
Isuzu Commercial Truck of America, Inc.
Important: If you have sold or traded your Isuzu vehicle, please enter the owner's name and address, if known, on the attached "Change of
Information" postcard, tear off at both perforations, and drop it in the mail. Postage has already been paid. We will contact the new owner.

4

[SAMPLE OWNER LETTER – CANADA]

CUSTOMER SATISFACTION CAMPAIGN
Campaign V2403

This notice applies to your vehicle,

JULY 2024

Dear Customer,

The purpose of this notice is to inform you that Isuzu Commercial Truck of Canada, Inc. is
conducting a customer satisfaction campaign that affects 2022 – 2024 model year Isuzu N-Series
trucks equipped with 5.2L (4HK1) diesel engines and option (IE1) 4-wheel disc brakes.
WHAT IS THE CONDITION?
We have determined that certain 2022 – 2024MY Isuzu N-Series vehicles equipped with 5.2L
(4HK1) diesel engines and option (IE1) 4-wheel disc brakes were built with an Engine Control
Module (ECM) and Diesel Exhaust Fluid Control Unit (DCU) containing an On Board Diagnostic
(OBD) calibration error for Diagnostic Trouble Codes (DTC) P2201 NOx Sensor Circuit
Performance Sensor 1 and P20EE Diesel Exhaust Fluid (DEF) System NOx Trap Low Efficiency.
WHAT WE WILL DO
IsuzueBay logo dealers are to reprogram the ECM and/or the DCU with the corrected service calibrations.
This service will be performed free of charge.
WHAT YOU SHOULD DO
We recommend you contact your Isuzu dealer to schedule an appointment to bring your vehicle in
to have this service performed. Present this Owner Notification Letter at the time of your
appointment or refer to Customer Satisfaction Campaign Bulletin CB24-L-001. We estimate this
service may take approximately 48 minutes to perform. Additional time may be necessary
depending on how appointments are scheduled and processed at your dealership. To locate your
nearest dealer please use the dealer locator on our website at www.isuzutruck.ca.
REIMBURSEMENT
If you have already paid for repairs to address the condition covered by this Customer Satisfaction
Campaign, you may be eligible to have those costs reimbursed. The enclosed form explains the
terms under which reimbursement may be available and how to request reimbursement. For
example, you will need to provide the original or a clear copy of the paid receipt or invoice
verifying the repair and the costs of that repair, in addition to other required information.
If you have questions or concerns, please contact our Customer Relations Department at 1-866441-9638.
We regret any inconvenience this action may cause you.
Sincerely,
Isuzu Commercial Truck of Canada, Inc.
Important: If you have sold or traded your Isuzu vehicle, please enter the owner's name and address, if known, on the attached "Change of
Information" postcard, tear off at both perforations, and drop it in the mail . Postage has already been paid. We will contact the new owner.

5

Customer Reimbursement Claim Form
If you have paid to have this condition corrected prior to this notification, you may be eligible to receive
reimbursement. Requests for reimbursement may include parts, labor, fees and taxes.
Reimbursement may be limited to the amount the repair would have cost if completed by an
authorized service facility.
Your claim will be acted upon within 60 days of receipt.

This section to be completed by Claimant
Date Claim Submitted: __________________________________________________
17-Digit Vehicle Identification Number (VIN): _________________________________
Mileage at Time of Repair: _______ Date of Repair: __________________________
Claimant Name (please print): ____________________________________________
Street Address or PO Box Number: ________________________________________
State: _________ ZIP Code: ___________________

City:
Claimant Email:

Daytime Telephone Number (include Area Code): _____________________________
Evening Telephone Number (include Area Code): _____________________________
Amount of Reimbursement Requested: $ ___________________________________
The following documentation must accompany this claim form.
Original or clear copy of all receipts, invoices, and/or repair orders that show:




The name and address of the person who paid for the repair.
The Vehicle Identification Number (VIN) of the vehicle that was repaired.
What problem occurred, what repair was done, when it was done, and who did it.
The total cost of the repair expense that is being claimed.
Payment for the repair in question and the date of payment.
(copy of front and back of cancelled check, or copy of credit card receipt)

My signature to this document attests that all attached documents are genuine and I
request reimbursement for the expense I incurred for the repair covered by this letter.
Claimant's Signature: ___________________________________________________
If your claim is:

Approved, you will receive a check,

Denied, you will receive a letter with the reason(s) for the denial, or

Incomplete, you will receive a letter identifying the documentation that is needed to complete the claim and
offered the opportunity to resubmit the claim when the missing documentation is available.
Please mail this claim form and the required documents to:
Isuzu Customer Relations
1400 S. Douglass Road, Suite 100
Anaheim, CA 92806
Reimbursement questions should be directed to the following number:
1-866-441-9638
Or Email: [email protected]
6

1

SaleBestseller No. 1
Valvoline DOT 3 & 4 Synthetic Brake Fluid, 32 oz
  • Mixes well with conventional fluids
  • Low-moisture formula provides excellent vapor lock...
  • Ideal for hydraulic and disc brakes
Bestseller No. 2
Valvoline DOT 3 & 4 Synthetic Brake Fluid, 12 oz
  • Ideal for hydraulic and disc brakes
  • Mixes well with conventional fluids
  • Low-moisture formula provides excellent vapor lock...

If the PDF is very large, it may not load in the preview below.

Download PDF [298.46 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: CB24-L-001

Replacement Service Bulletin Number:

MFR Communication Date: 2024-07-22

MFR Internal Campaign ID/Software Version: V2403

Communication Type: Service Campaign

NHTSA Components: ENGINE

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU Coding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...