News Channel Update |

Vehicle Compliance & Analysis

TO: Mercedes-Benz Dealer Principals, General Managers, FROM: Gregory Gunther, Senior Manager, Vehicle
Sales Managers, Service Managers, Parts Managers
Compliance and Analysis, Engineering Services
RE: Service Campaign Launch Notification
Replace B-Pillar Certification Label
DATE: July 12, 2024
MY20-24 G-Class (463 platform)

IMPORTANT SERVICE CAMPAIGN LAUNCH

IMPORTANT: Please review the information in this NCU carefully. FAQs have been provided to
answer the expected questions that may arise. These FAQs may be updated as necessary so
always refer to NetStar-VMI for the most up to date information.

Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FORMERCEDES (1-800-367-6372).

Sincerely,
Gregory Gunther
Senior Manager, Vehicle Compliance & Analysis

Mercedes-Benz USA, LLC
One Mercedes-Benz Drive

A Mercedes-Benz Group AG Company

Sandy Springs, GA 30328

770.705.0600

News Channel Update |

Vehicle Compliance & Analysis

Service Campaign Launch Notification
Campaign No. :

Campaign Desc. :

2024060020

24P4092230

July 12, 2024

Replace B-Pillar Certification Label

This is to notify you of the Service Campaign Launch to replace the certification label on the B-Pillar on 196 Model Year (“MY”)
2020-2024 G-Class (463 platform) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on July 12, 2024.

Background

Issue

Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined
that on certain MY 2020-2024 G-Class (463 platform) vehicles, the B-pillar
certification label might not contain the vehicle’s rim size, tire size, and cold tire
inflation pressure information as required by FMVSS 110 or FMVSS 120. In this case,
relevant regulatory requirements might not be met. Mercedes-Benz believes this
issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to
NHTSA for exemption from the notification and remedy requirements of 49 U.S.C.
chapter 301, pursuant to 49 CFR Part 556, on the basis that this non-compliance is
inconsequential as it relates to motor vehicle safety.

What We’re Doing

MBUSA will conduct a service campaign to remedy new vehicles in dealer
inventory. An authorized Mercedes-Benz dealer will replace the certification label
on the B-Pillar.

Parts

The remedy is available and can be performed as necessary.

Vehicle Model Year(s)

2020-24
G-Class

Vehicles Affected
Vehicle Model

Vehicle Populations
Total Campaign Population

196

Next Steps/Notes
Customer Notification Timeline

Customer letters will not be mailed. Retailed vehicles are not included in this
service campaign.

AOMS/SOMS

AOMs – This campaign may generate questions from your dealers.

While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer
satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES.

Mercedes-Benz USA, LLC
One Mercedes-Benz Drive

A Mercedes-Benz Group AG Company

Sandy Springs, GA 30328

770.705.0600

News Channel Update |

Vehicle Compliance & Analysis

Frequently Asked Questions (FAQ’s)
 What vehicles are affected?
 MY 2020-2024 G-Class (463 platform) vehicles in Dealer Inventory.
 Are new vehicles in Dealer Inventory affected by a Stop-Sale?
 Yes, per federal regulation, all new vehicles in dealer inventory with a recall are subject
to Stop-Sale until NHTSA decides to grant the petition.
 Will there be a remedy campaign or customer letters for the affected retailed and used vehicles?
 Not currently. MBAG intends to submit a petition to NHTSA for inconsequential
noncompliance, as it relates to motor vehicle safety. While we await NHTSA’s decision,
only new vehicles in dealer inventory are subject to a remedy campaign.
 How will the Dealer Inventory vehicles be remedied and released from the Stop-Sale
requirements?
 Dealer inventory vehicles affected by the “Pending” Recall with the same name will be
remedied by this Service Campaign. Once vehicles are remedied they may be sold.
Please allow 1-2 business days once the warranty claim is submitted under this Service
Campaign for the Pending Recall to be removed in NetStar-VMI. After the Pending Recall
has removed, the remedied vehicle can be DDR’d.
 Will the new B-Pillar certification labels be sent to dealers?
 Yes, all affected vehicles will have the pre-printed certification label sent to dealerships
automatically. Dealers should not order replacement labels since they are VIN-specific.
 Will dealers receive all labels in one shipment?
 Yes, labels for all affected G-class vehicles will be sent simultaneously.
 What if the VIN-specific certification label is damaged/missing?
 In case of damaged or missing certification label, the dealer will need to create a
workbench case to order a replacement. Label shipment dates may be subject to change
based on carrier; dealers should wait at least five business days from campaign launch
before creating a workbench case.

Mercedes-Benz USA, LLC
One Mercedes-Benz Drive

A Mercedes-Benz Group AG Company

Sandy Springs, GA 30328

770.705.0600

News Channel Update |

Vehicle Compliance & Analysis

 How can I find all vehicles affected in my inventory?
 Vehicle list can be downloaded from the Campaign section in Netstar. Select: Service >
Campaigns > Service Campaigns (A). Click campaign number 2024060020 (B) and
download the “Open” list (C).
 AOI campaign list is updated once a week on Monday.
 Additionally VIN lists for each wave will be provided to your AOM

 How will parts be shipped to me?
 Robbinsville Facing Dealers will receive their parts via dedicated delivery with their
standard parts shipment in a marked box. All other dealers will receive labels via FedEx
overnight priority.
 Will there be a punch time requirement for RO submission?
 No punch time required for this campaign.
 If the campaign claim is not submitted on the same day of repair, this will result in a
further delay of “Pending” campaign removal.
 Vehicle was retailed before “Pending” recall date, what should I do with the extra certification
label?
 Return all extra labels to dealer-facing PDC using “SCM authorized special return in
Paragon”
 Include a note in the return packaging to indicate that the label is “extra”

Mercedes-Benz USA, LLC
One Mercedes-Benz Drive

A Mercedes-Benz Group AG Company

Sandy Springs, GA 30328

770.705.0600

News Channel Update |

Vehicle Compliance & Analysis

 I recently had a Dealer trade what should I do with the unused certification label?
 Return all unused labels to dealer-facing PDC using “SCM authorized special return in
Paragon”
 Include a note in the return packaging to indicate that the label is “unused due to dealer
trade” along with the traded dealer code/address information
 What if the dealer installed an incorrect label?
 A new service campaign will be provided along with correct labels pushed to dealers.
 What I have additional questions on the label distribution process?
 Please see the NCU titled “Service Campaign Replace B-Pillar Certification Label” posted
by Parts Logistics on June 28, 2024 for detailed information on the distribution process
and when to submit a PAC workbench case.

Mercedes-Benz USA, LLC
One Mercedes-Benz Drive

A Mercedes-Benz Group AG Company

Sandy Springs, GA 30328

770.705.0600

2

Campaign No. 2024060020, July 2024

TO:

ALL MERCEDES-BENZ CENTERS

SUBJECT:

Model G-Class (463 platform)
Model Year 2020 - 2024
Replace B-Pillar Certification Label

Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain
MY 2020-2024 G-Class (463 platform) vehicles, the B-pillar certification label might not contain the vehicle’s
rim size, tire size, and cold tire inflation pressure information as required by FMVSS 110 or FMVSS 120. In
this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no
impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the
notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis
that this non-compliance is inconsequential as it relates to motor vehicle safety. An authorized MercedesBenz dealer will replace the certification label on the B-Pillar of affected vehicles.

Prior to performing this Campaign:


VMI must be checked before performing campaigns to verify that the campaign is required on a
specific vehicle. Always check for any other open campaigns and perform accordingly.



Please review the entire Campaign bulletin and follow the repair procedure exactly as described.

Approximately 196 vehicles are affected.
Order No. P-SC-2024060020

2

Replace B-Pillar Certification Label
Check Procedure
1. Check B-Pillar label TIRES (Figure 1, A) and RIM SIZE (Figure 1, B) information.
NOTE: TIRES and RIM SIZE information must match the tires and rims installed on the vehicle from factory!
a. If TIRES and/or RIM SIZE information is
INCORRECT (Figure 1), return label to
your dealer-facing PDC using the “SCM
authorized special return in Paragon”.

Figure 1

b. If TIRES and RIM SIZE information
is CORRECT (Figure 2) continue to
Work Procedure.
Note: If the vehicle is equipped with
staggered TIRES and RIM SIZE,
confirm both front and rear match what
is on the vehicle!

Figure 2

P-SC-2024060020

3

Work Procedure
1. Replace identification plate on driver's side B-pillar.
Lightly heat identification plate with a commercially available heat gun.
Refer to WS54.00-P-0125B (000 588 15 84 00 Heat gun).
Carefully remove identification plate with a suitable aid.
Utilize long wedge (W115 589 03 59 00) or a comparable non-marring plastic wedge.
Clean bonding surface with alcohol based cleaner to remove residual adhesive.

__________________________________________________________________________________________________
Primary Parts Information
Qty.

Part Name

As required (1)*

Identification plate for USA – model 463

Part Number

A 000 817 54 04

* Required parts will be shipped directly to your dealership and must not be ordered.

__________________________________________________________________________________________________
Note: The following allowable labor operation should be used when submitting a warranty claim for this repair:
Warranty Information
Damage

Operation

Code

Number

40 922 30**

12-2180**

Description

Replace identification plate on driver's side B-pillar

Labor Time
(hrs.)

0.1

** Requirement for punch times will be waived for this campaign
Note: Always check Xentry Operation Time (XOT) for the current OP-Code times. Labor times are subject to change
and updates may not be reflected in this document.

P-SC-2024060020