Loading...

NHTSA ID Number: 11005248

Manufacturer Communication Number: M010424

TSB/Document Date: 2024-07-26


Summary

For this vehicle, the automatic transmission limited warranty for the vehicle Selector Lever Magnetic Shift Interlock Mechanism (Gearshift lug assembly portion) has been extended to 10 years/120,000 miles, as determined by the vehicle’s original in-service date, when a gearshift lug repair kit installation procedure is required to be performed to address a displayed Check Control message (CCM) that states P not engaged - secure vehicle with parking brake against rolling away (Mailing July 2024).


00 00 006
Or:
00 00 556
And:
61 21 528
And, as needed:
61 00 006*
Or
00 58 500*
And:
25 16 520

Description

Labor Allowance

Carrying out vehicle test (Main work)

As applicable

Carrying out vehicle test (Plus work)

As applicable

Supporting voltage of the vehicle electrical system /
recharging vehicle battery

As applicable

Carrying out vehicle diagnosis, ABL (Work time)

WT FRU

Diagnosis Worktime Flat Rate (See below)

2 FRU

Replacing the gearshift lug (repair kit) without the gear
selector cable (Associated work, after vehicle diagnosis)

As applicable

If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead of 00 00 006, or
exclude (including 61 21 528) when the Vehicle Test is included in another repair.
Work time labor operation codes 61 00 006 and 00 58 500 are not considered Main labor operations.
*Based on which one applies to your dealer, please refer to SI M01 01 20 or M01 04 20 for the applicable procedure for
documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis work time (WT), job/repair work
time (WT), and the vehicle repairs your dealer performed, unless otherwise required by State law.

BMW Group’s AIR Application Resource for Flat Rate Labor Operation Codes
To obtain the corresponding flat rate unit (FRU) allowance information from the BMW Group AIR application
resource, start by entering the the Chassis Number (last seven (7) characters of the VIN), and click on the
“Search” icon. If the “Vehicle Selection” window displays two or more model possible vehicle choices, select the
applicable Model, or enter the full VIN (17 characters) instead to proceed. Click on the “Flat Rate Units” button
and enter a flat rate labor operation code number “without spaces” in the field to the right, click on the “Search”
icon to display the corresponding listing of “Flat rate unit group details” that are available and their
corresponding FRU allowances.
Previous Customer-Pay Repairs – Limited Warranty Extension Reimbursement
MINI USA, a division of BMW of North America, LLC (MINI USA) will provide reimbursement for qualifying customer-pay repairs
that were performed on an eligible vehicle prior to the release of this component and issue-specific limited warranty extension.
Customer-pay repairs are subject to the same vehicle eligibility requirements, limitations, and exclusion criteria that applies to the
MINI New Passenger Car Limited Warranty for Passenger Cars and Light Trucks.
Repairs That Do Not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United States and Puerto Rico, or
the diagnosis and repair of issues that are outside the intended scope of this extended coverage, other unrelated issues, and/or
that are due to outside influences are not covered by this extended limited warranty. This exclusion also applies to repairs that
were performed using (including those repairs that result from using) non-genuine MINI parts and/or used MINI passenger car
parts.
Requesting Reimbursement for a Previous Repair That Qualifies
For a customer to request reimbursement for a qualifying customer-pay repair performed either by an authorized MINI dealer or
independent repair shop located in the United States (including Puerto Rico), please have him/her submit his/her reimbursement
request online at www.MINI-RP.com under the following reference:
M-ELWR SL Interlock 10Y120M
Reimbursement Request Procedure

Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved

about:blank

4/6

7/24/24, 1:19 PM

01 04 24_SELECTOR LEVER MAGNETIC SHIFT INTERLOCK REPAIR KIT LTD WTY EXT 10 YR/120,000 MLS

The online process is initiated by attaching/sending PDF files of the supporting documentation for the prior repair.

The letter also includes alternative methods to request reimbursement, either through the mail or by fax as
described below:
MINI Customer Reimbursement Center
Attention: M-ELWR SL Interlock 10Y120M
P.O. Box 54067
Hurst, Texas 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.

FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback

To submit feedback for the technical topics of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the Warranty
Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department

Supporting Materials
picture_as_pdf M010424 Attach 1 Sample Cust Letter.pdf

Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank

5/6

7/24/24, 1:19 PM

01 04 24_SELECTOR LEVER MAGNETIC SHIFT INTERLOCK REPAIR KIT LTD WTY EXT 10 YR/120,000 MLS

Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank

6/6

Attachment 1 to SI M01 04 24

June 2024

47911 HAYLARD DRIVE
STE. 200
PLYMOUTH, MI 48170
DO NOT MAIL REPAIR ORDERS TO THIS ADDRESS

071284-T34-P1-010432
€/M2qAA!N rGB+
€9(CC)/QEGo+IV
yYY)9)yi)I9) IY I)

Sample
Sample
Sample
‚ƒƒ‚ƒƒ„„‚‚ƒ„„ƒ„‚„„„ƒƒ‚ƒƒƒƒ„ƒƒƒ„ƒ„‚„‚„‚ƒƒ‚„ƒ‚ƒ‚‚‚
June 2024
This “Important Limited Warranty Information,” effective with the date listed above, applies to the
MINI model with the Vehicle Identification Number (VIN) of WMWLN5C57GA123456.
Dear MINI Owner/Lessee:
MINI USA, a division of BMW of North America, LLC (“MINI USA”) is committed to delivering the best
product satisfaction to our customers, towards that end, MINI is extending the limited warranty
coverage for the automatic transmission’s:
• Selector Lever Magnetic Shift Interlock Mechanism on the above-referenced vehicle to:
• 10 years/120,000 miles, as determined from your vehicle’s original in-service date, when
a repair kit installation procedure is required to be performed to address the issue described below.

This component issue and repair-specific extended limited warranty (ELW) applies to defects in
materials and/or workmanship. This coverage is subject to the same vehicle eligibility requirements
and limitations that apply to the MINI New Passenger Car Warranty.
This is not a notice of a Recall or Service Action. This is a notice of a “component issue and
repair-specific extended limited warranty.”
The automatic transmission’s selector lever “position detection” mechanism return spring may fail. If
this situation occurs, a Check Control message (CCM) stating: “P not engaged - secure vehicle with
parking brake against rolling away” displays after the automatic transmission’s selector lever is placed
into park. However, the “parking lock” function will still engage, securing the vehicle against rolling.
If your vehicle is experiencing the “specific situation” described above, please contact your authorized
MINI dealer to schedule an appointment to have the issue with your vehicle diagnosed.
After the MINI dealer confirms that the affected component requiring repair in your vehicle
corresponds to this component issue and repair-specific extended limited warranty coverage, and your
vehicle qualifies, the authorized MINI dealer will perform the applicable “selector lever mechanism”
repair free of charge.
Company
MINI USA
A division of BMW
of North America, LLC
Mailing Address
PO Box 1227
Westwood NJ 07675-1227
Website
www.miniusa.com

Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico, or the diagnosis and repair of issues that are outside the intended scope of this
extended coverage, other unrelated issues, and/or that are due to outside influences are not covered by
this extended limited warranty. This exclusion also applies to repairs that were performed using (including
those repairs that result from using) non-genuine MINI parts and/or used MINI passenger car parts.
MINI USA will also reimburse “qualifying customer-pay repairs” performed prior to the release of this
component issue and repair-specific extended limited warranty, as described in this letter.
Our product’s integrity is essential to MINI’s success, and your trust. We are determined to exceed
those expectations and hope this warranty extension will further enhance your ownership experience.
Sincerely,
MINI USA, a division of BMW of North America, LLC

€/M2qAA!N rGB+
€9(CC)/QEGo+IV
yYY)9)yi)I9) IY I)

M-ELWR Shift Interlock Mechanism 10Y120M (2024)
10432

1

Sample

Attachment 1 to SI M01 04 24

June 2024

MINI Selector Lever Magnetic Shift Interlock Mechanism (ELW)
Previous Customer-Pay Repair – Required Documentation Checklist
VIN: WMWLN5C57GA123456
Reimbursement for a qualifying customer pay repair is available to the MINI Owner/Lessee who incurred the
expense. The questions below will assist you in reviewing your repair order/invoice documentation. When all your
responses below are “Yes,” and after completing the Checklist, proceed to page three (3) for further instructions.
Repair Questions
Was the vehicle’s selector lever assembly replaced or repaired to the address the
specific “position detection” mechanism-related issue described in this letter?

Responses
Yes, next

No

Did you pay for this repair?

Yes, next

No

Based on your vehicle’s in-service date (age), and mileage when the repair was
performed, was the vehicle still within 10 years (120 Mths)/120,000 miles?

Within 10/120,
Yes, next

No

Did the repair facility's diagnosis confirm this component failed for the specified
issue? (It did not fail due to another, or outside issue with your vehicle)

Yes, to the
Checklist

No

When a Repair Question’s results with a “No” response, no further action is required.
Required Repair Order (RO) or Invoice Documentation – Checklist (Responses = Yes)
For a previous repair reimbursement request, please include a copy of your completed page 2 document (one
per repair/request) together with legible copies (either a scan, photo, PDF, and/or screenshots) of the following
documentation with your name, address, and your preferred contact telephone number(s) and email address(es).
This document must include the following information:
Customer name and address
Vehicle Identification Number (“VIN”)
The date of repair
The mileage when the repair was performed
Itemized list of labor charges for all repairs* including diagnosis
Itemized list of parts (Part numbers), including any miscellaneous items, billed for all repairs*
(*) For repair orders containing multiple repair line items, reimbursement consideration will only be given to those
line-item expenses that are directly related to the specific repair that is now covered by this component-specific
extended limited warranty.
Required Proof of Payment Documentation
Please provide a copy of at least one of the following items as valid proof of payment:
Repair order (RO)/invoice stamped and dated as “PAID”
Cancelled check
Signed credit/debit card receipt
Credit/debit card statement
MINI USA, a division of BMW of North America, LLC (“MINI USA”) reserves the right to review and
adjust/reduce the amount that will be reimbursed based on what is normally recognized as customary,
fair, and reasonable, to diagnose, perform a repair, or replace a component (including the applicable
and scope of replacement parts, and related materials) to address an operational issue with the vehicle.
Except for reasonable account number protection measures, illegible, altered/modified, incomplete
and/or non-authentic repair order/invoice documentation will not be accepted.

€/M2qAA!N rGB+
€9(CC)/QEGo+IV
yYY)9)yi)I9) IY I)

M-ELWR Shift Interlock Mechanism 10Y120M (2024)
10432

2

Sample

Attachment 1 to SI M01 04 24

June 2024

MINI Selector Lever Magnetic Shift Interlock Mechanism ELW
Previous Customer-Pay Repair - Reimbursement Request
VIN: WMWLN5C57GA123456
For the MINI model with the Vehicle Identification Number (VIN) listed in this letter, MINI USA, a division BMW of
North America, LLC (“MINI USA”) will reimburse “qualifying customer-pay repairs” that were performed prior to the
release of this component issue and repair-specific extended limited warranty.
Customer-pay repairs are subject to the same vehicle and coverage eligibility requirements and limitations that
apply to the MINI New Passenger Car Limited Warranty.
Repairs that Do Not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United States and
Puerto Rico, or the diagnosis and repair of issues that are outside the intended scope of this extended coverage,
other unrelated issues, and/or that are due to outside influences are not covered by this extended limited warranty.
This exclusion also applies to repairs that were performed using (including those repairs that result from using)
non-genuine MINI parts and/or used MINI passenger car parts.
Requesting Reimbursement
To request reimbursement for a qualifying customer pay repair performed either by an authorized MNI dealer or
independent repair shop located in the United States (including Puerto Rico), please submit your reimbursement
request online at www.MINI-RP.com under the following reference:
• M-ELWR SL Interlock 10Y120M

Reimbursement Request Procedures
The online process is initiated by attaching/sending PDF files of the supporting documentation for the prior repair
(Completed letter page two (2), and the other required documentation).
The alternative method to request reimbursement, either by mail, or by fax, is described below:
MINI Customer Reimbursement Center
Attention: M-ELWR SL Interlock 10Y120M
P.O. Box 54067
Hurst, TX 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.

€/M2qBA!N rEB+
€9'BJX68Z]@

12

SaleBestseller No. 1
Valvoline DOT 3 & 4 Synthetic Brake Fluid, 32 oz
  • Mixes well with conventional fluids
  • Low-moisture formula provides excellent vapor lock...
  • Ideal for hydraulic and disc brakes
Bestseller No. 2
Valvoline DOT 3 & 4 Synthetic Brake Fluid, 12 oz
  • Ideal for hydraulic and disc brakes
  • Mixes well with conventional fluids
  • Low-moisture formula provides excellent vapor lock...

If the PDF is very large, it may not load in the preview below.

Download PDF [355.55 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: M010424

Replacement Service Bulletin Number:

MFR Communication Date: 2024-07-09

MFR Internal Campaign ID/Software Version: 2516900100

Communication Type: Warranty Program/Extension

NHTSA Components: POWER TRAIN

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, TransmissioneBay logo, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU Coding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
2026 BOSSCOMM IF745 Code Reader, Check Engine Scanner Diagnostic Tool with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/TransmissioneBay logo) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...