NHTSA ID Number: 11002828
Manufacturer Communication Number: S1408000384 REV.F
TSB/Document Date: 2024-07-02
Summary
"Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "
Case Number: S1408000384 Rev. F
Release Date:
June 2024
Symptom/Vehicle Issue: Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery
Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related
Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
Discussion: The IBS measures voltage, current and temperature. From these core
measurements, it estimates other characteristics of the battery such as SOC and battery internal
resistance.
This document provides added information about the IBS to avoid incorrect and unnecessary
IBS replacement. For most IBS returns, the IBS engineering team and supplier find no issue with the
returned parts. Please ensure claim narratives list and reference any DTCs mentioned in this
document and state the DTCs set at time of IBS replacement. A replacement IBS is not required on a
vehicle without DTCs.
Note: In most cases, the IBS can self-recover from a functional software defect if the two-way
connection gets cycled (i.e., resets/reboot the module). The IBS will then function normal
again, however; it will need a quiescent (vehicle completely sleep) period of ~2 to 4 hours to
calibrate SOC to the connected battery.
Battery Exchange
IBS DOES NOT NEED TO BE REPLACED WITH NEW OR RECHARGED BATTERIES. However, it
might require SOC adaptation.
IBS SOC Adaptation (Learning)
Learning needs 1 crank and 2-4 hours of quiescent/sleep time.
Quiescent/Sleep time is defined as Quiescent phase: [-500mA, 50mA] battery current.
If unsure of quiescent state current, disconnect the vehicle ground cable (example below: Vehicle
battery ground/charge point) from the IBS to guarantee no current flows through the battery during
this period. IBS 2-way connection and clamp connection to battery negative post should remain
connected for the IBS to operate. After completion of quiescent state, re-connect the ground back to
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
the IBS. In normal operation, all current flowing through the battery needs to pass through the IBS for
proper reading.
IBS Functional Internal Monitoring
IBS software monitors itself for defective behavior which can trigger DTC B2193 on the Body Control
Module (BCM) end. This defect occurs on rare occasions.
DTC U113E is a related DTC set by the BCM in the event of Local Interconnect Network (LIN)
communication not responsive. Using, the IBS power reboot (reset) can sometimes help clear these
faults.
IBS Related DTCs (set by BCM):
➢ B2193: Intelligent Battery Sensor Internal
➢ U113E: Lost communication with intelligent battery
DTC B2193
If you observe an active DTC B2193, reset the IBS by cycling the 2-way connection. Then start the
vehicle and wait for about 30 seconds to determine if the DTC clears or it changes to a stored DTC. If
you find it no longer exhibits an active fault, then it is appropriate to keep the same IBS. Else if an
active DTC B2193 remains, replace the IBS.
DTC U113E and LIN Diagnostics
If you observe an active DTC U113E set by the BCM, it means a defect exists in the LIN bus.
BCM monitors IBS data when IGN ON.
This defect can occur due to a wiring defect in the LIN bus created by short/open LIN bus circuit, or
IBS fuse. Moreover, it can relate to an internal IBS or BCM defect in hardware or software under rare
circumstances.
U113E DTC Root Cause Inspection:
1. Read vehicle DTCs while the IGN ON.
2. Wiggle the IBS 2-way harness takeout (LIN and IBS feed takeout) and monitor the state of
DTC U113E.
o If this step affects U113E behavior, the issue is likely related to a failure in the harness.
3. Verify power to IBS by back probing the IBS 2-way connector (pin 2, “RD” wire).
o If voltage is lower than 11.8V, follow normal procedures for low batteries.
4. Verify IBS feed fuse state. Replace the fuse if needed.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
5. Verify LIN bus activity with Mopar
scope.
o Config scope to LIN monitor if feasible.
o Replace the IBS only based confirmation from the LIN diagnostic.
DTC P00FD
This DTC relates to ECM diagnostic of the Aux battery. If ECM detects a voltage delta above allowed
limit between Aux and Main battery, this DTC get set. Please also note that ECM latches ON to this
fault even after the delta voltage returns to an acceptable level unless cleared with a service tool.
P00FD is not related to the IBS. Never replace IBS for P00FD.
Proper Battery Charging
In-Vehicle systems is not an issue. Please note to charge through the IBS or tie negative clamp to
Body/engine ground. Customers, Dealers, Mechanics, and Engineers usually want to place the
negative clamp on the pole of the battery. This creates Blind charging. “DO NOT BLIND CHARGE”
See below proper connections for charging.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
➢ IBS SOC adaptation is needed after charging the batteries.
➢ Note IBS will self-adapt in the next available quiescent state.
➢ A common misdiagnosis is Battery light illuminated. The IBS has NOTHING to do with this
light. The battery Light is indicative of a “CHARGING SYSTEM and condition of the battery”
START/STOP INOP
ESS INOP can occur due to many factors not related to the IBS functionality. Moreover, ESS can get
inhibited if battery SOC (state of charge) falls below the allowed SOC level. The SOC level varies
depending on temperature since temperature affects the battery performance. The SOC state is
monitored by the PCM and BCM. Battery temperature and SOC (State of charge are critical) see
chart for start stop engine on conditions.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
Example Display on a start stop vehicle.
➢ The IBS should only be replaced if a DTC for the IBS is active.
Stop-start Engine ON conditions:
1.
2.
3.
4.
Gear and brake switch conditions valid
Completed initial engine key start
Occupant sensed allowing engine start conditions
OBD conditions met allowing engine start conditions SOC (State of Charge) values found
under OBDII monitors using wiTech 2 – example below.
5. Vehicle hood is closed
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
IBS State of Charge (SOF) tool display.
New IBS Installation
1. If the Installation of a new IBS sensor is required it should be onto a fully charged battery.
2. Once installed allow the sensor to read the SOC for up to 4 hours without added system loads.
3. Performing from 3 to 5 drive cycles with an 8-hour key off period will improve calibration accuracy
of the new sensor for proper operation.
4. Continue the drive cycles to allow proper adaption of the battery sensor State of Charge (SOC) and
State of Function (SOF).
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Chrysler
Group LLC
Contact the STAR Center for assistance if no solution is found
Version 5/23/13
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-05-30 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: S1408000384 REV.F
Replacement Service Bulletin Number:
MFR Communication Date: 2024-06-25
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System: Start Stop, Sensor, State of Charge, IBS
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM
+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs. - 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW
/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year. - Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




