6/15/24, 5:47 AM

12 02 24_VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC

SIB 12 02 24
VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC

2024-06-06

This Service Information Bulletin (Revision 3) replaces SI B12 02 24 dated April 2024.
What’s New:

SIB title updated with Voluntary Emissions Recall verbiage and label information
Situation updated
Parts Information section added
Claim Information section updated

Please perform the procedure outlined in this Service Information on all affected vehicles before customer
delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure
the next time the vehicle is in the shop.
☐

THIS REPAIR IS MOBILE FRIENDLY

MODEL
E-Series
F95
F96
G05
G06
G07
G09
G70

Model Description
X5 M Sports Activity Vehicle
X6 M Sports Activity Coupe
X5 Sports Activity Vehicle
X6 Sports Activity Coupe
X7 Sports Activity Vehicle
BMW XM Sports Activity Vehicle
7 Series Sedan

Production Date
April 12, 2022 – April 8, 2024
February 28, 2022 – April 8, 2024
March 21, 2022 – April 9, 2024
April 26, 2022 – April 10, 2024
July 21, 2021 – April 11, 2024
September 30, 2021 – April 9, 2024
August 4, 2021 – April 11, 2024

AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR,
AWP, Campaign Summary or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. As of April 13, 2024, you can see a
list of affected vehicles in Inventory Campaign Details (ICD) under ROSS.

SITUATION
BMW AG has issued a Voluntary Emissions Recall (effective April 12, 2024) on certain Model Year 2023 2025 BMW vehicles that were produced between July 21, 2021, and April 11, 2024.
Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop,
until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery
Stop.

CAUSE
A DME calibration error.

CORRECTION
Determine the vehicle’s current I-level by either using AIR or the ISPA NEXT/AWP (Aftersales Workplace)
applications and perform the procedure as needed.

PROCEDURE
Program the vehicle using ISTA 4.46.5x or higher (released April 18th, 2024).
.
Model
Target Integration level

Copyright ©2024 BMW of North America, Inc.
about:blank

1/5

6/15/24, 5:47 AM

12 02 24_VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC

F95, F96, G05, G06, G07, G09
G70

S18A-24-03-547 or higher
G070-24-03-547 or higher

Note that ISTA will automatically reprogram and code all programmable control modules that do not have
the latest software.
Always connect a BMW-approved battery charger/power supply (SI B04 23 10) when performing
programming.
For information on programming and coding with ISTA, refer to DealerSpeed / TIS / Technical
Documentation / Diagnostics and Programming / Programming Documentation.

PARTS INFORMATION
Refer to SI B10 02 15 for label ordering information.
Bulk Supply Materials
Part Number
01 00 2 411 755
And for CA centers
01 00 2 411 754

Description
Generic Emissions Recall Label (92-435/ DN = Roll of 50)
Emissions Recall/Proof of Correction (CA)(92-084/ DN =
Pad of 100)

Quantity
1 in sublet
1 in sublet

Label Instructions
After the vehicle has been checked and
corrected, obtain a label (SD 92-435) and
with the indelible marker provided, legibly
print the Recall name, recall number, and
dealer code (5 digits) on the “Emissions
Recall Campaign Completed Label” (see
illustration). Peel the label from its backing
and affix it to the right (passenger) rear
side of the hood in the engine
compartment, close to windshield.

For California centers only: It is required by
the California Code of Regulations that an
executed orange "Vehicle Emission Recall
- Proof of Correction" certificate (SD92084, see illustration) be provided to each
customer (for vehicles registered in the
state of California), once the Recall on his
or her vehicle has been completed.

CLAIM INFORMATION
Vehicle Programming and Encoding
During this workshop visit, the affected vehicle may also show one or more programming and encoding Technical Campaign
repairs open, the programming and encoding procedure may only be invoiced one time.

Copyright ©2024 BMW of North America, Inc.
about:blank

2/5

6/15/24, 5:47 AM

12 02 24_VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC

Select one of these open Technical Campaigns to perform and submit for updating the vehicle to the required I-level
or higher instead (This includes 00 00 006 or 00 00 556, 61 21 528, and 61 00 730).
Please be sure to also perform any additional before and/or after work (including attaching labels) as required by
the open campaigns on the vehicle. Close any other open programming and encoding Campaign repairs as outlined
in the corresponding Service Information Bulletin.

As determined by the above, reimbursement for this Recall will be via normal claim entry utilizing the
applicable work package information below.
Defect
Code:

0012200600

Valvetronic - Program control units (DME)

Below are the special flat rate labor operation code choices for this action.
Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop
Work Pkg

Labor Operation Description (Plus work)

Labor Allowance

#1

00 76 532

Programming and encoding the vehicle
control units, includes Carrying out
8 FRU
vehicle test (00 00 556/61 21 528)

00 76 533

Programming and encoding the vehicle
control units was performed in
conjunction with another
campaign/repair prior to or during
1 FRU
this workshop visit (vehicle is already
at the specified Target integration level
or higher, no repair is necessary)

Or:

#2

Or:
The vehicle arrives at your center and this Recall shows open (No other Main work will be performed
or claimed during this workshop visit)
Work Pkg

Labor Operation Description (Main work)

Labor Allowance

#3

00 76 028

Programming and encoding the vehicle
control units, includes Carrying out
vehicle test (00 00 006/61 21 528)

9 FRU (G70);
10 FRU (F95, F96,
G05, G06, G07, G09)

00 76 029

Programming and encoding the vehicle
control units was performed in
conjunction with another
campaign/repair prior to or during
this workshop visit (vehicle is already
at the specified Target integration level
or higher, no repair is necessary)

1 FRU

Or:

#4

Only one of the flat rate labor operation codes listed above can be used for claim submission/reimbursement
purposes. Also, only one Main work flat rate labor operation code can be claimed per workshop visit.
Claim Repair Comments

Copyright ©2024 BMW of North America, Inc.
about:blank

3/5

6/15/24, 5:47 AM

12 02 24_VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC

Only reference the SIB number and the work package (Pkg) number performed in the technician’s RO notes
and the claim comments (For example: B12 02 24 WP 1), unless otherwise required by State law.
Sublet – Bulk Supply Materials (RO and Claim Comments Required)
Sublet Code 4

Reimbursement for the required label(s) (Do not use the BMW part
numbers for claim submission)

Up to $0.50

Sublet reimbursement calculation for claiming the required label(s) (CA = 2) (BMW part numbers) is at the
dealer net price amount for a quantity of 1 for the label(s) required to be used plus your center’s handling.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Programming and Encoding - Vehicle Control Units (RO and Claim Comments Required)
This procedure automatically reprograms and encodes any vehicle control modules that do not have the
latest software I-level.
If one or more control modules fail during the reprogramming procedure, claim the required consequential
repair work procedures to address this issue (including performing the IRAP Control Unit Recovery first as
required, refer to the SIB in AIR) under the Defect Code in this bulletin with the labor operations in AIR that
apply.
Please explain the additional work procedures that were performed (The why and the what) on the repair
order and in the claim comments.
For covered repairs that address control module failures that occurred prior to performing this
reprogramming procedure, claim this work with the Defect Code and labor operations (including the
diagnosis that applies) in AIR that apply.
Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the applicable
procedure for documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis
work time (WT), job/repair work time (WT), and the vehicle repairs your center performed, unless otherwise
required by State law.

FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback

To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department

Copyright ©2024 BMW of North America, Inc.
about:blank

4/5

6/15/24, 5:47 AM

12 02 24_VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC

Copyright ©2024 BMW of North America, Inc.
about:blank

5/5