NHTSA ID Number: 11001929
Manufacturer Communication Number: 2024.8.200_0524.pdf
TSB/Document Date: 2024-06-20
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
Owner's Manual
Owners Manual
Instrument Panel
Instrument Panel Overview
The instrument panel changes depending on whether CybertruckModel SModel XModel 3Model Y is:
• Off or Parked (shown below).
• Driving (see Instrument Panel - Driving on page 79).
• Charging (see Charging Instructions on page 714).
When CybertruckModel SModel XModel 3Model Y is off or Parked, the instrument panel shows remaining estimated range,
vehicle status, and outside temperature.
Owner's Manual
77
Owners Manual
1. When the car is off and you initially press the brake, indicator lights flash briefly along the top of the instrument panel.
Unless an indicator light applies to a current situation, it should turn off. If an indicator light fails to turn on or off, refer to
Indicator Lights on page 80.
2. An image of your car and its accompanying status (such as lights on, door open, etc.).
3. Total estimated driving distance (or energy) available. Instead of driving distance, you can display the percentage of
battery energy remaining. To do so, touch Controls > Display > Energy Display.
NOTE: When anticipating when you need to charge, use estimates as a general guideline only.
4. Estimated outside temperature.
5. Pay attention to instructions or important alert messages that display here. If any alerts are in effect, you can view
information about them by touching Controls and then touching the bell icon located at the top of the screen.
6. Currently selected drive mode: Park, Reverse, Neutral, or Drive. If Auto Shift out of Park is enabled, Drive or Reverse is
automatically selected (based on sensor input) and displayed on the instrument panel when the driver's door is closed and
seatbelt is buckled (see Seat Belts on page 253).
7. Current time of day.
See Popup Messages and Vehicle Alerts on page 33 for more information about alert popups on your vehicle's touchscreen.
78
Owner's Manual
Owners Manual
Instrument Panel - Driving
When CybertruckModel SModel XModel 3Model Y is driving (or ready to drive), the instrument panel shows your current
driving status and a real-time visualization of the road as detected by the Autopilot components. The visualization
automatically zooms in and out based on the detected road type.
NOTE: Touch Controls > Autopilot > Full Self-Driving Visualization Preview (if equipped) to display more details about the
roadway and its surroundings, such as road markings, stop lights, objects (such as trash cans and poles), etc.
1. The instrument panel displays your location on a map, a wiper menu, Auto Shift out of Park instructions, etc. When a
navigation route is active, the upcoming portion of the route displays.
Owner's Manual
79
Owners Manual
2. The speed limit (if available) that is currently being detected by Speed Assist (see Speed Assist on page 640).
3. Current driving speed.
4. The currently set cruising speed. When Traffic-Aware Cruise Control is available but you haven't set a cruising speed by
engaging Traffic-Aware Cruise Control or Autosteer, the icon is gray (see Autopilot Features on page 544).
5. Autosteer is actively steering CybertruckModel SModel XModel 3Model Y. When Autosteer is available but you haven't
activated it, the icon is gray (see Autosteer on page 547).
6. When navigating, upcoming instructions in the navigation route appear here.
7. Total estimated driving distance (or energy) available. Instead of driving distance, you can display the percentage of
battery energy remaining (touch Controls > Display > Energy Display).
NOTE: When anticipating when you need to charge, use estimates as a general guideline only.
8. Surrounding road users are shown in their corresponding locations.
WARNING: Although the instrument panel shows surrounding traffic, some vehicles may not be displayed. Never rely
on the instrument panel to determine if a vehicle is present (for example, in your blind spot). Always use your mirrors
and perform shoulder checks.
9. Your CybertruckModel SModel XModel 3Model Y.
10. The power meter displays real-time power usage. During acceleration, the bar fills to the right to represent power being
used. During deceleration (when CybertruckModel SModel XModel 3Model Y is moving and you release your foot from the
accelerator pedal), the bar fills to the left with a green color to represent power being fed back to the Battery by
regenerative braking (see Regenerative Braking on page 460).
11. When Autosteer is active and detects the driving lane, it is highlighted in blue (see Autopilot Features on page 544).
Depending on the current driving scenario, you may see neighboring lanes.
NOTE: In situations where Autosteer is unable to detect lane markings, the driving lane is determined based on the vehicle
you are following.
NOTE: If Navigate on Autopilot is active, the driving lane displays as a single blue line in front of
CybertruckModel SModel XModel 3Model Y (see Navigate on Autopilot on page 552).
Indicator Lights
Indicator lights display along the top of the instrument panel to show status and alert you of specific vehicle conditions.
Indicator
Description
A brake system fault is detected or the brake fluid level is low. See Braking and Stopping on page 458.
Contact Tesla immediately.
A brake booster fault has been detected. See Braking and Stopping on page 458.
An ABS (Anti-lock Braking System) fault is detected. See Braking and Stopping on page 458. Contact Tesla
immediately.
A parking brake fault is detected. Contact Tesla. See Parking Brake on page 464.
80
Owner's Manual
Owners Manual
Indicator
Description
The parking brake is manually applied. See Parking Brake on page 464.
Tire pressure warning. The pressure of a tire is out of range. If a fault with the Tire Pressure Monitoring
System (TPMS) is detected, the indicator flashes. For a TPMS fault, contact Tesla. See Tire Care and
Maintenance on page 742.
A seat belt for an occupied seat is not fastened. See Seat Belts on page 253.
Airbag safety. If this red indicator does not flash on briefly when CybertruckModel SModel XModel 3Model Y
prepares to drive, or if it remains on, contact Tesla immediately. See Airbags on page 341Airbags on page
319.
Front fog lights are on, if equipped. See Lights on page 432.
Parking lights (side marker lights, tail lights, and license plate lights) are on. See Lights on page 432.
Low beam headlights are on.
High beam headlights are on. Illuminates when high beams are on but the Auto High Beam setting (if
equipped) is turned off or if the Auto High Beam setting is turned on but is temporarily unavailable. See Lights
on page 432.
High beam headlights are currently turned on, and Auto High Beam (if equipped) is ready to turn off the high
beams if light is detected in front of CybertruckModel SModel XModel 3Model Y. See Lights on page 432.
High beam headlights are temporarily turned off because Auto High Beam (if equipped) is on and is detecting
light in front of CybertruckModel SModel XModel 3Model Y. When light is no longer detected, the high
beams automatically turn back on. See Lights on page 432.
Owner's Manual
81
Owners Manual
Indicator
Description
If a fault is detected with the Adaptive Front Lighting this indicator displays, if equipped. See Adaptive Front
Lighting System (AFS) on page 438.
If a fault is detected with the Adaptive Front Lighting this indicator displays, if equipped. See Adaptive Front
Lighting System (AFS) on page 437.
This indicator flashes amber when the electronic stability control systems are actively minimizing wheel spin
by controlling brake pressure and motor power. See Traction Control on page 491. If this indicator remains
on, a fault is detected and you should immediately contact Tesla.
If a fault is detected that reduces the performance of the air suspension system, this amber indicator light
displays (see Air Suspension on page 467). If the problem persists, contact Tesla.
If a fault is detected that disables the air suspension system, this red indicator light displays (see Air
Suspension on page 467). Contact Tesla.
Vehicle Hold is actively applying the brakes. See Vehicle Hold on page 488.
Electronic stability control systems are no longer minimizing wheel spin. See Traction Control on page 491.
CybertruckModel SModel XModel 3Model Y is in Transport mode and can roll freely. It does not automatically
shift into Park when you exit. See Activate Transport Mode on page 899.
Trailer mode (if equipped) is active. See Towing and Accessories on page 528.
A blue snowflake appears when some of the energy stored in the Battery may not be available due to cold
weather conditions. During these cold weather conditions, charging rates may also be limited. If
CybertruckModel SModel XModel 3Model Y is plugged in, you can heat your Battery by turning on climate
control with the mobile app. The snowflake disappears when the Battery is sufficiently warm.
A green icon appears when regenerative braking is limited. See Regenerative Braking on page 460 for more
information.
82
Owner's Manual
Owners Manual
Indicator
Description
Vehicle power is currently being limited because the energy remaining in the Battery is low, the vehicle's
systems are being heated or cooled, or an error is detected by the drive inverter.
Owner's Manual
83
Owners Manual
Instrument Panel
Instrument Panel Overview
The instrument panel changes depending on whether CybertruckModel SModel XModel 3Model Y is:
• Off (shown below).
• Driving (see Instrument Panel - Driving on page 89Instrument Panel - Driving on page 91Instrument Panel - Driving on
page 93).
• Charging (see Charging Status on page 718).
When CybertruckModel SModel XModel 3Model Y is off, the instrument panel shows remaining estimated range, status of
doors, and outside temperature. When you press the brake, indicator lights flash on briefly along the top. Unless an indicator
light applies to a current situation, it should turn off. If an indicator light fails to turn on or off, contact Tesla.
NOTE: The following illustration is provided for demonstration purposes only. Depending on vehicle options, software version,
and market region, the information displayed may be slightly different.
84
Owner's Manual
Owners Manual
The following indicators illuminate on the instrument panel to advise you or alert you of a specific condition.
A brake system fault is detected or the brake fluid level is low. See Braking and Stopping on page 458. Contact
Tesla immediately.
A brake booster fault has been detected. See Braking and Stopping on page 458.
An ABS (Anti-lock Braking System) fault is detected. See Braking and Stopping on page 458. Contact Tesla
immediately.
The parking brake is manually applied. See Parking Brake on page 464.
A parking brake fault is detected. Contact Tesla. See Parking Brake on page 464.
Low beam headlights are on.
High beam headlights are on. Illuminates when high beams are on but the Auto High Beam setting is turned off
or if the Auto High Beam setting is turned on but is temporarily unavailable. See High Beam Headlights on page
436.
Owner's Manual
85
Owners Manual
High beam headlights are currently turned on, and Auto High Beam is ready to turn off the high beams if light is
detected in front of CybertruckModel SModel XModel 3Model Y. See High Beam Headlights on page 436.
High beam headlights are temporarily turned off because Auto High Beam is on and is detecting light in front of
CybertruckModel SModel XModel 3Model Y. When light is no longer detected, the high beams automatically
turn back on. See High Beam Headlights on page 436.
Parking lights (side marker lights, tail lights, and license plate lights) are on. See Lights on page 432.
Front fog lights, if equipped. See Lights on page 432.
Adaptive Front Lighting, if equipped. See Adaptive Front Lighting System (AFS) on page 438.
Adaptive Front Lighting, if equipped. See Adaptive Front Lighting System (AFS) on page 437.
Electronic stability control systems are actively minimizing wheel spin by controlling brake pressure and motor
power (indicator flashes amber). See Traction Control on page 491. If this indicator remains on, a fault is
detected and you should immediately contact Tesla.
If a fault is detected that reduces the performance of the air suspension system, this amber indicator light
displays (see Air Suspension on page 467Air Suspension on page 470Air Suspension on page 472). If the
problem persists, contact Tesla.
If a fault is detected that disables the air suspension system, a red indicator lights up on the instrument panel
(see Air Suspension on page 467Air Suspension on page 470Air Suspension on page 472). Contact Tesla.
Airbag safety. If this red indicator does not flash on briefly when CybertruckModel SModel XModel 3Model Y
prepares to drive, or if it remains on, contact Tesla immediately. See Airbags on page 341Airbags on page 319.
Vehicle Hold is actively applying the brakes. See Vehicle Hold on page 488.
86
Owner's Manual
Owners Manual
Tire pressure warning. The pressure of a tire is out of range. If a fault with the Tire Pressure Monitoring System
(TPMS) is detected, the indicator flashes. For a TPMS fault, contact Tesla. See Tire Care and Maintenance on
page 742.
A door or trunk is open. See Keys and Doors on page 144, Rear Trunk on page 166, or Front Trunk on page
180.
A seat belt for an occupied seat is not fastened. See Seat Belts on page 253.
NOTE: Depending on the date of manufacture, rear seating positions may not be equipped with a seat belt
reminder.
Electronic stability control systems are no longer minimizing wheel spin. On a Rear Wheel Drive vehicle, the
traction control system has been turned off, or on an All-Wheel Drive vehicle, Slip Start has been enabled. See
Traction Control on page 491.
CybertruckModel SModel XModel 3Model Y is in Transport mode and can roll freely. It does not automatically
shift into Park when you exit. See Instructions for Transporters on page 880Instructions for Transporters on
page 888Instructions for Transporters on page 907.
Trailer mode (if equipped) is active. See Towing and Accessories on page 528.
Appears when some of the energy stored in the Battery may not be available due to cold weather conditions.
During these cold weather conditions, charging rates may also be limited. If CybertruckModel SModel XModel
3Model Y is plugged in, you can heat your Battery by turning on climate control with the mobile app. The
snowflake icon disappears when the Battery is sufficiently warm.
Vehicle power is currently being limited because the energy remaining in the Battery is low or the vehicle's
systems are being heated or cooled.
Flashes green when the left turn signal is operating. Both turn signal indicators flash green when the hazard
warning flashers are operating.
Flashes green when the right turn signal is operating. Both turn signal indicators flash green when the hazard
warning flashers are operating.
Popup Messages and Vehicle Alerts
Popup messages appear on the instrument panel. For example, a seat belt reminder appears if a seat belt is unfastened in an
occupied seat, an alert appears to notify you of an incoming phone call, a text message appears (when applicable), and voice
commands appear when in use.
Owner's Manual
87
Owners Manual
You can view a list of vehicle alerts and notifications by touching the notifications icon on the touchscreen.
NOTE: Not all alerts provide additional information at this time.
88
Owner's Manual
Owners Manual
Instrument Panel - Driving
When CybertruckModel SModel XModel 3Model Y is driving (or ready to drive), the instrument panel shows your current
driving status and a real-time visualization of the road as detected by the Autopilot components (see About Autopilot on page
541). The visualization automatically zooms in and out as needed to inform you when a vehicle is detected in your blind spot.
NOTE: The following illustration is provided for demonstration purposes only. Depending on vehicle options, software version,
and market region, the information displayed may be slightly different.
NOTE: Touch Controls > Autopilot > Full Self-Driving Visualization Preview (if equipped) to display more details about the
roadway and its surroundings, such as road markings, stop lights, objects (such as trash cans and poles), etc.
Owner's Manual
89
Owners Manual
1. Indicator lights display along the top to provide status (see Instrument Panel Overview on page 84).
2. When you are actively navigating to a destination, navigation instructions display here. Use the left steering wheel buttons
to change what displays on the left side of the instrument panel whenever navigation instructions are not displayed (see
Using Left Steering Wheel Buttons on page 383).
3. Autosteer is actively steering CybertruckModel SModel XModel 3Model Y. When Autosteer is available but you haven't
activated it, the icon is gray (see Autosteer on page 578).
4. Traffic-Aware Cruise Control is cruising at a set speed. When Traffic-Aware Cruise Control is available but you haven't set
a cruising speed, the icon is gray and the speed is not shown (see Traffic-Aware Cruise Control on page 567).
5. Driving speed.
6. The speed limit (if available) that is currently being detected by Speed Assist (see Speed Assist on page 640).
7. On the Energy graph, dashed lines appear on the power meter if CybertruckModel SModel XModel 3Model Y is limiting
power. The dashed lines appear on the top portion (energy being used) when power available for acceleration is being
limited, and on the bottom portion (energy being gained) when power that can be gained by regenerative braking is limited.
CybertruckModel SModel XModel 3Model Y limits power for many reasons. Here are just a few examples:
◦ Acceleration may be limited when the Battery is reaching a low state of charge or if the powertrain is hot.
◦ Both acceleration and regenerative braking may be limited when the ambient temperature is either very high or very low.
◦ Regenerative braking may be limited when the Battery is fully charged.
NOTE: Use the right steering wheel buttons to control what displays on the right side of the instrument panel (see Using
Right Steering Wheel Buttons on page 384).
8. Pay attention to important alert messages that display here. If any alerts are in effect, you can view information about them
by touching the alert icon (exclamation mark) on the touchscreen’s status bar (the topmost area of the touchscreen).
9. Use the right steering wheel buttons to change what displays on the right side of the instrument panel whenever a phone
call is not active (see Using Right Steering Wheel Buttons on page 384).
10. Total estimated driving distance (or energy) available. Instead of driving distance, you can display the percentage of
battery energy remaining. To do so, touch Controls > Display > Energy Display.
NOTE: When anticipating when you need to charge, use range estimates as a general guideline only.
11. Currently selected drive mode: Park, Reverse, Neutral, or Drive.
12. The car in front of you (if applicable).
NOTE: In situations where Autosteer is unable to detect lane markings, the driving lane is determined based on the vehicle
you are following. In these situations, the car in front of you is highlighted in blue.
13. Pay attention to important driving-related messages that appear at the bottom center of the instrument panel.
14. Your CybertruckModel SModel XModel 3Model Y.
15. When Autosteer is active and detects the driving lane, it is highlighted in blue (see Autosteer on page 578). Depending on
the current driving scenario, you may see neighboring lanes.
NOTE: If Navigate on Autopilot is active, the driving lane displays as a single blue line in front of
CybertruckModel SModel XModel 3Model Y (see Navigate on Autopilot on page 583).
WARNING: Although the instrument panel shows surrounding traffic, some vehicles may not be displayed. Never rely on
the instrument panel to determine if a vehicle is present (for example, in your blind spot). Always use your mirrors and
perform shoulder checks.
90
Owner's Manual
Owners Manual
Instrument Panel - Driving
When CybertruckModel SModel XModel 3Model Y is driving (or ready to drive), the instrument panel shows your current
driving status. The visualization automatically zooms in and out to as needed to inform you when a vehicle is detected in your
blind spot.
NOTE: The following illustration is provided for demonstration purposes only. Depending on vehicle options, software version,
and market region, the information displayed may be slightly different.
1. Indicator lights display along the top to provide status (see Instrument Panel Overview on page 84).
Owner's Manual
91
Owners Manual
2. When you are actively navigating to a destination, navigation instructions display here. Use the left steering wheel buttons
to change what displays on the left side of the instrument panel whenever navigation instructions are not displayed (see
Using Left Steering Wheel Buttons on page 383).
3. When you set a cruising speed using cruise control, the set speed displays on the cruise control icon (see Cruise Control
on page 474).
4. Driving speed.
5. The speed limit (if available) that is currently being detected by Speed Assist (see Speed Assist on page 640).
6. On the Energy graph, dashed lines appear on the power meter if CybertruckModel SModel XModel 3Model Y is limiting
power. The dashed lines appear on the top portion (energy being used) when power available for acceleration is being
limited, and on the bottom portion (energy being gained) when power that can be gained by regenerative braking is limited.
CybertruckModel SModel XModel 3Model Y limits power for many reasons. Here are just a few examples:
◦ Acceleration may be limited when the Battery is reaching a low state of charge or if the powertrain is hot.
◦ Both acceleration and regenerative braking may be limited when the ambient temperature is either very high or very low.
◦ Regenerative braking may be limited when the Battery is fully charged.
7. Pay attention to important alert messages that display here. If any alerts are in effect, you can view information about them
by touching the alert icon (exclamation mark) on the touchscreen’s status bar (the topmost area of the touchscreen).
8. Use the right steering wheel buttons to change what displays on the right side of the instrument panel whenever a phone
call is not active (see Using Right Steering Wheel Buttons on page 384).
9. Total estimated driving distance (or energy) available. Instead of driving distance, you can display the percentage of
battery energy remaining. To do so, touch Controls > Display > Energy Display.
NOTE: When anticipating when you need to charge, use range estimates as a general guideline only.
NOTE: In cold weather, some of the stored energy in the Battery may not be available on your drive because the Battery is
too cold. When this happens, a portion of the Battery meter is blue and the driving distance value has a snowflake image
next to it. If CybertruckModel SModel XModel 3Model Y is plugged in, you can heat your Battery using wall power by
turning on climate control using the mobile app. When the Battery warms up, the blue portion on the meter and the
snowflake image are no longer displayed.
10. Currently selected drive mode: Park, Reverse, Neutral, or Drive.
11. The car in front of you (if applicable).
12. Pay attention to important driving-related messages that appear at the bottom center of the instrument panel.
13. Your CybertruckModel SModel XModel 3Model Y.
14. Driving lane (if detected). Depending on the current driving scenario, you may see neighboring lanes.
WARNING: Although the instrument panel shows surrounding traffic, some vehicles may not be displayed. Never rely on
the instrument panel to determine if a vehicle is present (for example, in your blind spot). Always use your mirrors and
perform shoulder checks.
92
Owner's Manual
Owners Manual
Instrument Panel - Driving
When CybertruckModel SModel XModel 3Model Y is driving (or ready to drive), the instrument panel shows your current
driving status.
NOTE: The following illustration is provided for demonstration purposes only. Depending on vehicle options, software version,
and market region, the information displayed may be slightly different.
1. Indicator lights display along the top to provide status (see Instrument Panel Overview on page 84).
2. When you are actively navigating to a destination, navigation instructions display here. Use the left steering wheel buttons
to change what displays on the left side of the instrument panel whenever navigation instructions are not displayed (see
Using Left Steering Wheel Buttons on page 383).
3. Cruise control status displays here, if engaged (see Cruise Control on page 474).
4. Dashed lines appear on the power meter if Model S is limiting power. The dashed lines appear on the top portion (energy
being used) when power available for acceleration is being limited, and on the bottom portion (energy being gained) when
power that can be gained by regenerative braking is limited. CybertruckModel SModel XModel 3Model Y limits power for
many reasons. Here are just a few examples:
◦ Acceleration may be limited when the Battery is reaching a low state of charge or if the powertrain is hot.
◦ Both acceleration and regenerative braking may be limited when the ambient temperature is either very high or very low.
◦ Regenerative braking may be limited when the Battery is fully charged.
5. Driving speed.
6. Pay attention to important alert messages that display here. If any alerts are in effect, you can view information about them
by touching the alert icon (exclamation mark) on the touchscreen’s status bar (the topmost area of the touchscreen).
7. Use the right steering wheel buttons to change what displays on the right side of the instrument panel whenever a phone
call is not active (see Using Right Steering Wheel Buttons on page 384).
8. Total estimated driving distance (or energy) available. Instead of driving distance, you can display the percentage of
battery energy remaining. To do so, touch Controls > Display > Energy Display.
NOTE: When anticipating when you need to charge, use range estimates as a general guideline only.
Owner's Manual
93
Owners Manual
NOTE: In cold weather, some of the stored energy in the Battery may not be available on your drive because the Battery is
too cold. When this happens, a portion of the Battery meter is blue and the driving distance value has a snowflake image
next to it. If CybertruckModel SModel XModel 3Model Y is plugged in, you can heat your Battery using wall power by
turning on climate control using the mobile app. When the Battery warms up, the blue portion on the meter and the
snowflake image are no longer displayed.
9. Currently selected drive mode: Park, Reverse, Neutral, or Drive.
10. Pay attention to important driving-related messages that appear at the bottom center of the instrument panel.
11. Your CybertruckModel SModel XModel 3Model Y.
94
Owner's Manual
Owners Manual
Voice Commands
NOTE: For your convenience, Tesla allows you to choose from a variety of languages to use for voice commands. To choose a
different language, touch Controls > Display > Voice Recognition Language.
Use voice commands to easily control settings and preferences without using the touchscreen. Voice commands are designed
to understand natural requests. The following is a non-exhaustive list of actions that you can perform with voice commands:
• Adjust climate preferences
• Tweak the windshield wiper speed and frequency
• Control various aspects of your vehicle
• Navigate to a location
• Call a contact
• Interact with apps and settings
To initiate a voice command, press and release the right scroll wheel button on the steering wheelsteering yoke (or steering
wheel)press and release the right scroll wheel button on the steering wheelsteering yoke (or steering wheel)fully press the
microphone button on the right side of the steering wheelsteering yoke (or steering wheel)fully press the microphone button
on the right side of the steering wheelsteering yoke (or steering wheel)touch the voice button on the right side of the steering
wheelsteering yoke (or steering wheel). When a chime sounds, make your request.
Owner's Manual
95
Owners Manual
96
Owner's Manual
Owners Manual
Examples of Voice Commands
Here is a list of example voice commands. This is not an exhaustive list. Tesla is constantly working to improve voice
commands.
NOTE: Your vehicle must be in Park to enable some voice commands (such as Sentry Mode, Dog Mode, etc.).
Climate Controls
Adjust your climate preferences:
• "Make it cooler"
• "Make it warmer"
• "Turn on/off the driver's seat heater"
• "Cool down the passenger"
• "Direct airflow to my face"
Owner's Manual
97
Owners Manual
• "Sync climate"
• "Increase/decrease the fan speed"
• "Turn on/off rear defroster"
• "Set the temperature/fan..."
• "Turn on recirculate"
Windshield Wipers
Update the windshield wiper speed and frequency based on changing road and weather conditions:
• "Speed up the wipers"
• "Speed up the wiper"
• "Turn on/off the wiper"
• "Increase/decrease windshield wiper speed by..."
• "Turn on/off the wipers"
Vehicle Controls
Modify various controls in your vehicle:
• "Sentry Mode on/off"
• "Keep my car safe"
• "Keep my truck safe"
• "Lock/unlock the doors"
• "Turn on Dog Mode"
• "Fold/unfold the mirrors"
• "Open/close charge port"
• "Start/stop charging"
• "Open service settings"
• "Open the glovebox"
Navigation
Search for or navigate to a location:
• "Where is [location]?"
• "Drive to [location]"
• "Navigate to [location]"
• "Show nearby Superchargers"
• "I'm feeling hungry/lucky" (see Maps and Navigation on page 687).
• "Stop navigation"
• "Mute voice guidance"
If you have defined a navigation address for your home or work locations, you can use a voice command to navigate there by
saying "Navigate home" or "Take me to work".
Contacts
To call or text a contact on your Bluetooth-connected phone (see Phone, Calendar, and Web Conferencing on page 362), say:
• "Call [contact name/phone number]"
98
Owner's Manual
Owners Manual
• "Text [contact name/phone number]"
Media
Listen to media and adjust your playback preferences:
• "Listen to [song name]"
• "Lower/raise the volume"
• "Skip to next"
• "Pause/play song"
• "Change the source to [media source]"
To improve voice command recognition accuracy, provide multiple cues in your command, such as artist and song.
Apps and Settings
Easily navigate through your apps and settings:
• "Open [Toybox/browser/theater/phone]"
• "Search for..."
• "The screen is too bright"
• "Show me the Owner's Manual"
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.8.200_0524.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-04-30
MFR Internal Campaign ID/Software Version: 2024.8.200
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.