Loading...

NHTSA ID Number: 11001848

Manufacturer Communication Number: fsd-12-4_0524.pdf

TSB/Document Date: 2024-06-19


Summary

TeslaeBay logo does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.


10. Remove the shrink wrap from the power feed, then splice or solder the accessory's wire harness to it.
WARNING: Use extreme care when accessing the power feed. Assume that the low voltage components of
CybertruckModel SModel XModel 3Model Y, including all wires and connectors, are always energized. Because the
48V low voltage system operates at a higher voltage than a typical low voltage system, there is an increased risk of
personal injury, arcing, or component damage if the low voltage components of CybertruckModel SModel XModel
3Model Y are handled improperly.
CAUTION: Carefully check the wiring of the accessory and ensure that you are connecting the positive (+) wire of the
accessory to the positive wire (red with a blue stripe) of the power feed, and the negative (-) wire of the accessory to
ground (brown with a blue stripe). See 48V Power Feed Specifications on page 1415. Accessories without proper
power and grounding may not function as expected, and may be damaged as a result.
CAUTION: Ensure that the wires are properly insulated (taped or heatshrinked) after splicing or soldering an
accessory's wiring to the power feed.
11. Ensure your accessory or attachment is secured to the vehicle.

Owner's Manual

1419

Maintenance
12. Replace the powered frunk lining, connect the emergency interior release connector, and replace all fasteners and trim.
Torque the bolts to 12 Nm (8.87 ft-lb).
13. Power on the vehicle (see Starting and Powering Off on page 373) and enable power to the power feed, if desired (see
Enabling Power to the Power Feeds on page 1420).
Enabling Power to the Power Feeds
Once you have connected an accessory to a power feed, enable power from the touchscreen. Touch Controls > Outlets & Mods
and then touch a power feed on the touchscreen to enable it.
CAUTION: Leaving an accessory powered depletes the High Voltage BatteryeBay logo. Power to the power feed shuts off when the
capacity of the High Voltage BatteryeBay logo is very low.
By default, the power feeds stop providing power when you exit CybertruckModel SModel XModel 3Model Y and close the
doors. To instead keep the power feeds on when you leave the vehicle, touch Keep On Cabin and Bed Outlets (see Keep On
Cabin and Bed Outlets on page 1121).

Using RFID Transponders
When attaching an RFID transponder (used by many automated toll systems) inside CybertruckModel SModel XModel 3Model
Y, place the transponder next to the rear view mirror. This ensures best results and minimizes any obstruction to your driving
view. Refer to the RFID manufacturer's instructions for specific placement.
NOTE: You can also attach a weather-proof transponder to the front license plate.

1420

Owner's Manual

Maintenance
Do It Yourself Maintenance
Learn how to perform simple Do It Yourself procedures, such as replacing wiper blades and cabin filters, or installing the paint
protection film kitsuch as replacing the wiper blade and HEPA filter. Go to https://www.tesla.com/support/do-it-yourselfguides for instructions, animations, and videos of these procedures.
NOTE: Due to market region or vehicle configuration specifics, some parts and procedures may not be available for your
vehicle. When navigating to https://www.tesla.com/support/do-it-yourself-guides, select your vehicle, region, and/or
language to see an updated list of parts and accessories available for your region.
CAUTION: Perform each procedure in a dry and well-lit area. For your safety, only perform a procedure if you feel
comfortable doing so, and always follow provided instructions.

Owner's Manual

1421

Specifications
Identification Labels
Vehicle Identification Number
You can find the VIN at the following locations:
• The TeslaeBay logo mobile app.
• Touch Controls > Software.
• Stamped onto the driver's side A-pillar. Can be seen by looking through the windshield on the driver's side of the vehicle.

• Printed on the Vehicle Certification label, located on the door pillar. Can be seen when the driver’s door is open.

1422

Owner's Manual

Specifications
Emission Control Label
The emission control label is located on the opening face of the powered frunk.

Owner's Manual

1423

Specifications
Vehicle Loading
It is important to understand your vehicle's original tire sizes and pressures, and the GVWR (Gross Vehicle Weight Rating) and
GAWR (Gross Axle Weight Rating). This information can be found on two labels attached to the front door pillar on the driver's
side of the vehicle.

1. Tire and Loading Information Label
2. Vehicle Certification Label
WARNING: Overloading CybertruckModel SModel XModel 3Model Y has an adverse effect on braking and handling,
which can compromise your safety or cause damage.
CAUTION: Never store large amounts of liquid in CybertruckModel SModel XModel 3Model Y. A significant spill can
cause electrical components to malfunction.

Tire and Loading Information Label
The Tire and Loading Information label provides:
• The maximum number of occupant seating positions.
• The maximum vehicle capacity weight.
• The size of the original tires.
• The cold inflation pressures for the original front and rear tires. These pressures are recommended to optimize ride and
handling characteristics.

1424

Owner's Manual

Specifications

Never change this label, even if you use different tires in the future.
NOTE: If CybertruckModel SModel XModel 3Model Y is loaded to its full capacity, double check all tires to ensure they are
inflated to their recommended pressure levels (see Maintaining Tire Pressures on page 1389).
WARNING: Tire pressures printed on the Tire and Loading Information label DO NOT APPLY to towing. When towing, tire
pressures must be increased. For information about the tire pressures required when towing, refer to see Towing a
Trailer on page 1249.

Vehicle Certification Label
WARNING: The Vehicle Certification label specifies the weight ratings for CybertruckModel SModel XModel 3Model Y
based on the tires that were installed at time of manufacture and the tire pressures indicated on the Tire and Loading
Information label. However, the weight ratings will change if you change the factory-installed tires or inflate tires to a
pressure that differs from those shown on the Tire and Loading Information label.
The Vehicle Certification label provides:
• GVWR - Gross Vehicle Weight Rating. The maximum allowable total mass of CybertruckModel SModel XModel 3Model Y.
This is calculated as the weight of CybertruckModel SModel XModel 3Model Y equipped with the heaviest factory
selectable options, all passengers, fluids, and cargo.
• GAWR FRT and GAWR RR - Gross Axle Weight Rating for the front and rear axles. The GAWR is the maximum distributed
weight that each axle can support.

CAUTION: To prevent damage, never load CybertruckModel SModel XModel 3Model Y so that it is heavier than GVWR
or exceeds the individual GAWR weights.

Roof Racks
CybertruckModel SModel XModel 3Model Y supports the use of TeslaeBay logo-approved roof racks. Roof racks can be installed over
the roof, over the bed, or both. To install roof racks, you must use only roof rack systems that have been approved by TeslaeBay logo.
You can find the roof rack instructions in the box or on the TeslaeBay logo Shop.
Maximum Load on Roof Racks: 220 lb (100 kg) per 2-crossbar set. For example, a 2-crossbar set placed on the roof has a
maximum load of 220 lb. An additional 2-crossbar set placed over the cargo bed also has a maximum load of 220 lb (100 kg).

Owner's Manual

1425

Specifications

See Carrying Accessories and Crossbars on page 1257 for more information.
CAUTION: Failure to use the correct roof racks and follow the instructions can cause significant damage.
WARNING: When loading the roof racks, distribute the load evenly and maintain a low center of gravity. Loaded vehicles,
with higher centers of gravity, may handle differently than unloaded vehicles. Take extra precautions, such as slower
speeds and increased stopping distance, when driving heavily loaded roof racks.

Calculating Load Limits
1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the “Tire
and Loading Information” label.
2. Determine the combined weight of all occupants that will ride in the vehicle.
3. Subtract the combined weight of the occupants from XXX lbs or XXX kg (see Step 1).
4. The resulting figure equals the available cargo load capacity. For example, if the “XXX” amount equals 1400 lbs (635 kg)
and there will be five 150 lb (68 kg) passengers in the vehicle, the amount of available cargo capacity is 650 lbs (1400 ‑ 750
(5 x 150) = 650 lbs) or 295 kg (635 ‑ 340 (5 x 68) = 295 kg).
5. Determine the combined cargo weight being loaded on the vehicle. That weight must not exceed the available cargo load
capacity calculated in Step 4.
WARNING: The powered frunk and the cargo bed are the preferred places to carry objects. In a collision, or during hard
braking and sharp turns, loose items in the cabin could injure occupants.
Example Load Limit Calculations
How much cargo CybertruckModel SModel XModel 3Model Y can carry depends on the number and weight of passengers.
The following calculated load limit examples assume passengers weigh 150 lbs (68 kg). If passengers weigh more or less,
available cargo weight decreases or increases respectively.
Driver and one passenger
Description

Total

Vehicle capacity weight

954 lbs (433 kg)

Subtract occupant weight (2 x 150 lbs/68 kg)

300 lbs (136 kg)

1426

Owner's Manual

Specifications
Description

Total

Available cargo weight

654 lbs (297 kg)

Driver and four passengers
Description

Total

Vehicle capacity weight

954 lbs (433 kg)

Subtract occupant weight (5 x 150 lbs/68 kg)

750 lbs (340 kg)

Available cargo weight

204 lbs (93 kg)

Cautions and Warnings
WARNING: Drive cautiously when Cybertruck is carrying a large load. Increase braking distance, reduce speed when
making sharp turns, and avoid abrupt steering. Failure to drive cautiously increases the risk of losing control which can
result in property damage, personal injury, and death.
WARNING: The loading capacity of your vehicle is limited either by how much space is available (volume capacity) or by
how much weight the vehicle can carry (payload capacity). When you have loaded Cybertruck to its maximum weight
capacity, do not add more cargo, even if there is space available. Overloading, or improper loading, can contribute to
properly damage, personal injury, or death.

Owner's Manual

1427

Specifications
Dimensions, Weights, and Cargo Capacity
Dimensions - Exterior

NOTE: Adding accessories can affect the dimensions listed.
Callout

Measurement (in)

Measurement (mm)

223.74

5,682.9

Including mirrors

95.01

2,413.3

Folded mirrors

86.64

2,200.7

Excluding mirrors

79.99

2,031.8

Entry/Exit air setting

68.54

1740.8

Low air setting

69.13

1755.8

Medium air setting

70.70

1795.8

High air setting

73.06

1855.8

Very High air setting

74.64

1895.8

Extract (highest) air setting

76.61

1945.8

Wheelbase

143.11

3,635.0

E - Overhang

Front

34.58

878.3

F - Overhang

Rear

46.05

1,169.6

Entry/Exit air setting

7.93

201.3

Low air setting

8.52

216.3

Medium air setting

10.09

256.3

High air setting

12.45

316.3

Very High air setting

14.03

356.3

Extract (highest) air setting

16.00

406.3

Front and Rear

69.76

1,772.0

A

B - Overall Width

C - Overall Height

D

G - Ground Clearance

H - Track

1428

Description
Overall Length

Owner's Manual

Specifications
Dimensions - Cargo Bed

Callout

Description

Measurement (in)

Measurement (mm)

A

Maximum Height - Front

28.66

727.9

B

Maximum Height - Rear

19.89

505.2

C

Width at Floor

51.00

1,295.4

D

Length at Floor

72.92

1,852.2

Dimensions - Interior Cabin
Location

Measurement (in)

Measurement (mm)

Head Room - Front
Head Room - Rear

41.69
39.05

1,058.8
991.9

Leg Room - Front
Leg Room - Rear

41.09
40.90

1,043.6
1,038.8

Shoulder Room - Front
Shoulder Room - Rear

63.31
62.06

1,608.0
1,576.4

Owner's Manual

1429

Specifications
Location

Measurement (in)

Measurement (mm)

57.22
57.22

1,453.3
1,453.5

Hip Room - Front
Hip Room - Rear

Weights - Vehicle
NOTE: Weight values are approximate and can vary slightly depending on a vehicle's options.
Dual Motor
All Season

Dual Motor
All Terrain

Tri Motor
All Season

Tri Motor
All Terrain

Curb Mass Total*

6,634 lb
(3,009 kg)

6,669 lb
(3,025 kg)

6,863 lb
(3,113 kg)

6,898 lb
(3,129 kg)

Curb Mass - Front Axle

3,287 lb
(1,491 kg)

3,305 lb
(1,499 kg)

3,336 lb
(1,513 kg)

3,353 lb
(1,521 kg)

Curb Mass - Rear Axle

3,347 lb
(1,518 kg)

3,364 lb
(1,526 kg)

3,527 lb
(1,600 kg)

3,545 lb
(1,608 kg)

Payload

2,200 lb
(998 kg)

2,500 lb
(1134 kg)

2,000 lb
(907 kg)

2,270 lb
(1,030 kg)

8,834 lb
(4,007 kg)

9,169 lb
(4,159 kg)

8,863 lb
(4,020 kg)

9,169 lb
(4,159 kg)

4,096 lb
(1,858 kg)

4,107 lb
(1,863 kg)

4,019 lb
(1,823 kg)

GVWR - Rear Axle

4,738 lb
(2,149 kg)

5,062 lb
(2,296 kg)

4,844 lb
(2,197 kg)

5,009 lb
(2,272 kg)

GAWR - Front Axle***

4,255 lb
(1,930 kg)

4,255 lb
(1,930 kg)

4,255 lb
(1,930 kg)

4,255 lb
(1,930 kg)

GAWR - Rear Axle

5,009 lb
(2,272 kg)

5,247 lb
(2,380 kg)

5,009 lb
(2,272 kg)

5,247 lb
(2,380 kg)

1...8182838485...94

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
289 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [46.18 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: fsd-12-4_0524.pdf

Replacement Service Bulletin Number:

MFR Communication Date: 2024-05-31

MFR Internal Campaign ID/Software Version: fsd-12-4

Communication Type: Over The Air

NHTSA Components: UNKNOWN OR OTHER

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU C0ding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
  • Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Sale
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...