If tire wear is uneven (on one side of the tire only) or becomes abnormally excessive, check the wheel alignment. If the tires
need to be serviced, such as rotated or replaced, reset the tire configuration (see Tire Configuration on page 765) to improve
your driving experience.
Punctured Tires

A puncture eventually causes the tire to lose pressure, which is why it is important to check tire pressures frequently.
Permanently repair or replace punctured or damaged tires as soon as possible.
Your tubeless tires may not leak when penetrated, provided the object remains in the tire. If, however, you feel a sudden
vibration or ride disturbance while driving, or you suspect a tire is damaged, immediately reduce your speed. Drive slowly,
while avoiding heavy braking or sharp steering and, when safe to do so, stop the vehicle. Arrange to have
CybertruckModel SModel XModel 3Model Y transported to a Tesla Service Center, or to a nearby tire repair center.
NOTE: In some cases, you can temporarily repair small tire punctures (under 1/4” (6 mm)) using an optional tire repair kit
available from Tesla. This allows you to slowly drive CybertruckModel SModel XModel 3Model Y to Tesla or to a nearby tire
repair facility.
WARNING: Do not drive with a punctured tire that has not been repaired, even if the puncture has not caused the tire to
deflate. A punctured tire can deflate suddenly at any time.
Flat Spots

If CybertruckModel SModel XModel 3Model Y is stationary for a long period, tires can form flat spots. When
CybertruckModel SModel XModel 3Model Y is driven, these flat spots cause a vibration which gradually disappears as the
tires warm up and regain their original shape.
To minimize flat spots during storage, inflate tires to the maximum pressure indicated on the tire wall. Then, before driving,
release air to adjust tire pressure to the recommended levels.
Improving Tire Mileage

To improve the mileage you get from your tires, maintain tires at the recommended tire pressures, observe speed limits and
advisory speeds, and avoid:
• Pulling away quickly, or hard acceleration.
• Fast turns and heavy braking.
• Potholes and objects in the road.
• Hitting curbs when parking.

756

Owner's Manual

Owners Manual
• Contaminating tires with fluids that can cause damage.
Replacing Tires and Wheels
Tires degrade over time due to the effects of ultraviolet light, extreme temperatures, high loads, and environmental conditions.
It is recommended that tires are replaced every six years, or sooner if required, even if tread depth is above the minimum.
When a tire set becomes worn, replace all four tires at the same time. Choose a Tesla-approved tire which is designed
specifically for your vehicle. Most Tesla-approved tires can be identified with a "T-mark" specification on the tire's sidewall
(for example, T0, T1, T2). Tesla-approved tires are designed to work with electric drivetrains and optimize performance, safety,
reliability, and durability. For more information about Tesla-approved replacement tires, refer to the Service ManualService
ManualService ManualService ManualService ManualService ManualService Manaul.
NOTE: The T-mark identifies a specific tire's progression according to Tesla specifications. For example, a T1 Michelin Primacy
is newer than a T0 Michelin Primacy, but is not necessarily newer than other models of T0 tires.
If tires need to be replaced early, for example due to a flat tire, we recommend replacing the tires in pairs unless the other tires
are within 2/32 in (1.5 mm) of tread depth of the new tire. When replacing tires, it is important to match the brand and model of
the older tires. Always place a pair of new tires on the rear if all four tires are the same size. Always balance the wheel and tire
after replacing a tire. Consult with a professional tire retailer and installer for further guidance. If you replace your tires or
install different ones, reset the tire configuration (see Tire Configuration on page 765). This resets the learned tire settings
and improves the driving experience on your new tires. It may take up to 24 hours after a tire replacement or repair before the
tire lubricant is completely dry and tires achieve maximum adherence to the rims. Avoid hard accelerations during this period
to avoid tire slip on the rim.
NOTE: Regardless of the number of tires replaced, a complete set of matching tires is recommended for optimum
performance.
If tires other than those specified are used, ensure that the load and speed ratings marked on the tire (see Understanding Tire
Markings on page 880) equal or exceed those of the original specification.
For the specification of the original wheels and tires installed on CybertruckModel SModel XModel 3Model Y, see Wheels and
Tires on page 875.
If you replace a wheel, the TPMS (Tire Pressure Monitoring System) sensors need to be reset to ensure they provide accurate
warnings when tires are under- or over-inflated (see Resetting the TPMS Sensors on page 765) (see Automatic Reset of
TPMS Sensors on page 766) (see Automatic Reset of TPMS Sensors on page 766 and Manually Resetting TPMS Sensors on
page 766) (see Automatic Reset of TPMS Sensors on page 766) (see Automatic Reset of TPMS Sensors on page 767)(see
Automatic Reset of TPMS Sensors on page 767).
NOTE: Installing winter tires with aggressive compound and tread design may result in temporarily-reduced regenerative
braking power. However, your vehicle is designed to continuously recalibrate itself, and after changing tires it will increasingly
restore regenerative braking power after some moderate-torque straight-line accelerations. For most drivers this occurs after
a short period of normal driving, but drivers who normally accelerate lightly may need to use slightly harder accelerations while
the recalibration is in progress. Go to Service > Wheel & Tire > Tires to select winter tires and quicken this process.
WARNING: For your safety, use only tires and wheels that match the original specification. Tires that do not match the
original specification can affect the operation of the TPMS.
WARNING: Never exceed the speed rating of your vehicle's tires. The speed rating is shown on the sidewall of your tires
(see Understanding Tire Markings on page 880).
Asymmetric Tires

Some CybertruckModel SModel XModel 3Model Y tires are asymmetric and must be mounted on the wheel with the correct
sidewall facing outward. The sidewall of the tire is marked with the word OUTSIDE. When new tires are installed, make sure
that the tires are correctly mounted on the wheels.

Owner's Manual

757

Owners Manual

TI-6279
WARNING: Road holding is seriously impaired if the tires are incorrectly installed on the wheels.
Removing and Installing Aero Covers

If your CybertruckModel SModel XModel 3Model Y is equipped with aero covers, you must remove them to access the lug
nuts.
To remove an aero cover:
1. Grasp the aero cover firmly with both hands.
2. Pull the aero cover toward you to release the retaining clips.

758

Owner's Manual

Owners Manual

Owner's Manual

759

Owners Manual

To install an aero cover:
1. Align the aero cover with the valve stem.
2. Firmly press the center of the cover to secure it in place, then work your way out to firmly pressing the outer perimeter of
each spoke. You may need to hold onto the opposite side of the cover until all spokes are secured.
3. Firmly press the center of the cap with your hands (do not hit the cover with your hands) to ensure it is secured.
4. As a final check, quickly pull each spoke to confirm they are secured in place.

760

Owner's Manual

Owners Manual

For Gemini wheels, press on the perimeter of the cover until it aligns with the wheel surface. Press on the Tesla “T” in the
center until the cap snaps into place. See Parts and Accessories on page 800 for more information.
CAUTION: To prevent the aero cover from falling off, ensure that it is fully secured before driving.
Removing and Installing Lug Nut Covers

If your CybertruckModel SModel XModel 3Model Y is equipped with lug nut covers, you must remove them to access the lug
nuts.
To remove a lug nut cover:
1. Insert the curved part of the lug nut cover tool, if equipped (located in the glovebox in some vehicles, or you can use a
small allen wrench) into the hole at the base of the Tesla "T".
NOTE: The lug nut cover tool can also be purchased at an auto parts store or through online retailers.
Owner's Manual

761

Owners Manual

2. Maneuver the lug nut cover tool so that it is fully inserted into the hole in the lug nut cover.
3. Twist the lug nut cover tool so that the curved part is touching the middle of the lug nut cover.

762

Owner's Manual

Owners Manual
4. Firmly pull the lug nut tool away from the wheel until the lug nut cover is released.

Owner's Manual

763

Owners Manual
1. Place the curved part of the lug nut cover tool (located in the glovebox for some vehicles, or you can use a small allen
wrench) into the lowered perimeter around the middle of the lug nut cover.
NOTE: The lug nut cover tool can also be purchased at an auto parts store or through online retailers.

2. Twist the lug nut cover tool so that the end of the curved part is facing away from the Tesla "T".
3. Firmly pull the lug nut tool away from the wheel until the lug nut cover is released.

To install the lug nut cover:
1. Align the lug nut cover into position.
2. Push firmly on the lug nut cover until it fully snaps into place.
CAUTION: Make sure the lug nut cover is fully secure before driving to prevent it from falling off.

764

Owner's Manual

Owners Manual
Wheel Configuration

If you are installing new wheels or swapping them for different ones, update your vehicle's wheel configuration by touching
Controls > Service > Wheel & Tire > Wheels. This allows CybertruckModel SModel XModel 3Model Y to learn the new wheels
and provide more accurate status updates on your vehicle. Select a wheel from the drop down menu that matches the new
wheels you plan to install on CybertruckModel SModel XModel 3Model Y. Selecting new wheels in the wheel configuration
also changes the wheels that appear on your vehicle's avatar on the touchscreen.
Ensure you are aware if your vehicle is equipped with staggered wheels, meaning the wheels are different sizes in the front and
rear. Check the front and rear tire sizes marked on the tire sidewall to see if they match or are different sizes. If the wheels are
staggered, take extra precaution to ensure the new wheels you install are staggered in the same way as the previous wheels.
NOTE: Changing your vehicle's wheel configuration can impact range estimates, tire pressure warning levels, and vehicle
visualization.
WARNING: Only use Tesla-approved wheels when installing or swapping wheels. Using non Tesla-approved wheels can
cause serious damage. Tesla is not liable for damage caused by using wheels not approved by Tesla.
Tire Configuration
To see the miles driven since your last tire rotation or replacement, touch Controls > Service and look under Last Tire Service.
After the tires on CybertruckModel SModel XModel 3Model Y are rotated, replaced, or swapped, update your vehicle's tire
configuration by touching Reset, or by touching Wheel & Tire > Tires from the same screen. This allows your vehicle to reset
the learned tire settings and improve your driving experience. This also clears and resets the tread wear alert for the vehicle
until you travel 6,250 miles (10,000 km) and low tread depth is detected again.
Ensure you are aware if your vehicle is equipped with winter tires. Winter tires can be identified by a mountain and snowflake
icon on the tires' sidewall. See Winter Tires on page 768 for more information.
NOTE: Changing your vehicle's tire configuration can temporarily impact acceleration and regenerative braking levels and
should only be done after tires have been rotated or replaced.
Tire Pressure Monitoring
Each tire should be checked monthly when cold and inflated to the recommended pressures that are printed on the Tire and
Loading Information label located on the driver’s door pillar (see Maintaining Tire Pressures on page 752). If your vehicle has
tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, determine the proper tire
inflation pressure for those tires.
As an added safety feature, your vehicle has been equipped with a TPMS that displays a tire pressure telltale (Tire Pressure
Warning) on the instrument paneltouchscreen when one or more of your tires is significantly under- or over-inflated.
Accordingly, when the Tire Pressure indicator light displays on the instrument paneltouchscreen to alert you about tire
pressure, stop and check your tires as soon as possible, and inflate them to the proper pressure (see Maintaining Tire
Pressures on page 752). Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
Under-inflation also reduces range efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.
If CybertruckModel SModel XModel 3Model Y detects a fault with the TPMS, this indicator flashes for one
minute whenever you power on CybertruckModel SModel XModel 3Model Y.

NOTE: Installing accessories that are not approved by Tesla can interfere with the TPMS.
CAUTION: Avoid placing powered USB devices near the card reader on the center console (see Key Card on page 111) as
powered USB devices may interfere with the tire pressure monitoring system.
WARNING: The TPMS is not a substitute for proper tire maintenance, including manually checking tire pressures and
regularly inspecting the condition of tires. It is the driver's responsibility to maintain correct tire pressure, even if underor over-inflation has not reached the level for the TPMS to trigger the Tire Pressure Warning on the instrument
paneltouchscreen.
Resetting the TPMS Sensors

After replacing one or more wheels (but not after replacing a tire or rotating wheels), the TPMS sensors need to be reset to
ensure tire pressure warnings are accurate.
Owner's Manual

765

Owners Manual
On newer versions of Model S, the TPMS sensors are reset automatically after driving over 15 mph (25 km/h) for longer than
10 minutes. But for older versions, follow these steps:
1. Inflate all tires to their recommended pressures, as indicated on the Tire and Loading Information label located on the door
pillar.
2. Get ready to drive for ten minutes, then touching Controls > Service > Reset TPMS Sensors.
3. Follow the onscreen instructions.
CAUTION: Selecting the incorrect wheel size may result in false tire pressure warnings. If a tire pressure warning
displays, exit the vehicle, close the rear trunk and all doors, wait for the touchscreen to go black, then re-enter the
vehicle and ensure that the correct wheel size is selected before touching Reset TPMS Sensors.
NOTE: On some older versions of Model S, when changing to 21" wheels, the TPMS may generate false tire pressure warnings.
Bring Model S to a Tesla Service Center for further adjustment.
WARNING: Do not reset the TPMS sensors in an attempt to clear tire pressure warnings.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire or rotating wheels), the TPMS sensors are reset to ensure tire
pressure warnings are accurate. TPMS sensors reset automatically after driving over 15 mph (25 km/h) for longer than 10
minutes.
NOTE: After replacing a wheel, false tire pressure warnings may display before you've driven 15 mph (25 km/h) for longer than
10 minutes.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire or rotating wheels), the TPMS sensors are reset to ensure tire
pressure warnings are accurate. TPMS sensors reset automatically after driving over 15 mph (25 km/h) for longer than 10
minutes.
NOTE: After replacing a wheel, false tire pressure warnings may display before you've driven 15 mph (25 km/h) for longer than
10 minutes.
Manually Resetting TPMS Sensors

To accommodate aftermarket tires and specific off-highway driving situations (such as track events), you can reset the TPMS
sensors to trigger an alert based on the currently set tire pressure instead of the default factory tire pressure. To do so, touch
Service > Reset TPMS Sensors and follow the onscreen instructions.
NOTE: Resetting TPMS sensors may be especially helpful when using Track Mode, but remember to restore the factory TPMS
setting when returning to normal driving.
WARNING: If your CybertruckModel SModel XModel 3Model Y is equipped with aftermarket tires that differ in size from
those printed on the Tire and Loading Information Label (see Vehicle Loading on page 844), it is the driver's
responsibility to determine the correct tire pressure. Do not drive on public roads when tires are not inflated to the
correct pressure.
WARNING: Do not depend on TPMS sensors to accurately determine pressures and trigger alerts. It is the driver's
responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 752). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire), the TPMS sensors are relearned to ensure tire pressure
warnings are accurate. TPMS sensors reset automatically within 10 minutes of driving over 15 mph (25 km/h).
WARNING: If your CybertruckModel SModel XModel 3Model Y is equipped with aftermarket tires that differ in size from
those printed on the Tire and Loading Information Label (see Vehicle Loading on page 844), it is the driver's
responsibility to determine the correct tire pressure. Do not drive on public roads when tires are not inflated to the
correct pressure.

766

Owner's Manual

Owners Manual
WARNING: Do not depend on TPMS sensors to accurately determine pressures and trigger alerts. It is the driver's
responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 752). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire), the TPMS sensors are relearned to ensure tire pressure
warnings are accurate. TPMS sensors reset automatically within two minutes of driving over 15 mph (25 km/h).
WARNING: If your CybertruckModel SModel XModel 3Model Y is equipped with aftermarket tires that differ in size from
those printed on the Tire and Loading Information Label, it is the driver's responsibility to determine the correct tire
pressure. Do not drive on public roads when tires are not inflated to the correct pressure.
WARNING: Do not depend on TPMS sensors to accurately determine pressures and trigger alerts. It is the driver's
responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 752). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire), the TPMS sensors are relearned to ensure tire pressure
warnings are accurate. TPMS sensors reset automatically within 10 minutes of driving over 15 mph (25 km/h).
WARNING: If your CybertruckModel SModel XModel 3Model Y is equipped with aftermarket tires that differ in size from
those printed on the Tire and Loading Information Label (see Vehicle Loading on page 844), it is the driver's
responsibility to determine the correct tire pressure. Do not drive on public roads when tires are not inflated to the
correct pressure.
WARNING: Do not depend on TPMS sensors to accurately determine pressures and trigger alerts. It is the driver's
responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 752). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Replacing a Tire Sensor

If the Tire Pressure warning indicator displays frequently, use the mobile app to schedule a service appointment to determine
if a tire sensor needs to be replaced. If a non-Tesla Service Center repairs or replaces a tire, the tire sensor may not work until
Tesla performs the setup procedure.
TPMS Malfunction

CybertruckModel SModel XModel 3Model Y has also been equipped with a TPMS malfunction indicator to indicate when the
system is not operating properly.
The TPMS malfunction indicator is combined with the tire pressure indicator light. When the system detects a
malfunction, the indicator flashes for approximately one minute, then remains continuously lit. This sequence
continues upon subsequent vehicle start-ups as long as the malfunction exists. When the TPMS malfunction
indicator is on, the system might not be able to detect or signal under- or over-inflated tires as intended.

TPMS malfunctions can occur for a variety of reasons, including installing replacement or alternate tires or wheels that prevent
the TPMS from functioning properly. Always check the TPMS malfunction indicator light after replacing one or more tires or
wheels on your vehicle to ensure that the replacement tires or wheels allow the TPMS to continue to function properly.
NOTE: If a tire has been replaced or repaired using a different tire sealant than the one available from Tesla, and a low tire
pressure is detected, it is possible that the tire sensor has been damaged.
Seasonal Tire Types
Understand Your Tire Type

The type of tires that your vehicle is originally equipped with depends on vehicle model and market region. It is important to
understand the capabilities of your vehicle's tires and whether they are suited for summer, all-season, or winter driving. Check
the information on the sidewall of a tire for information about a tire's performance characteristics (see Understanding Tire
Markings on page 880).

Owner's Manual

767

Owners Manual
Summer and All-Season Tires

Summer tires and all season tires are designed for maximum dry and wet road performance but are not designed to perform
well in winter conditions. All-season tires are designed to provide adequate traction in most conditions year-round, but may
not provide the same level of traction as winter tires in snowy or icy conditions. All-season tires can be identified by “ALL
SEASON" and/or "M+S” (mud and snow) on the tire sidewall.
If driving in cold temperatures or on roads where snow or ice may be present, Tesla recommends using winter tires.
WARNING: In cold temperatures or on snow or ice, summer and all-season tires do not provide adequate traction.
Selecting and installing the appropriate tires for winter conditions is important to ensure the safety and optimum
performance of your CybertruckModel SModel XModel 3Model Y.
Winter Tires

Use winter tires to increase traction in snowy or icy conditions. When installing winter tires, always install a complete set of
four tires at the same time. Winter tires must be the same diameter, brand, construction and tread pattern on all four wheels.
Winter tires can be identified by a mountain/snowflake symbol on the tire's sidewall.

When driving with winter tires, you may experience more road noise, shorter tread life, and less traction on dry roads.
NOTE: Installing winter tires with aggressive compound and tread design may result in temporarily-reduced regenerative
braking power. However, your vehicle is designed to recalibrate itself to restore regenerative braking power after a short
period of normal driving.
NOTE: If you install winter tires or replace your tires, reset the tire configuration by navigating to Controls > Service > Wheel &
Tire Configuration > Tires (see Tire Configuration on page 765). This resets the learned tire settings and improves the driving
experience on your new tires.
Driving in Low Temperatures
Tire performance is reduced in low ambient temperatures, resulting in reduced grip and an increased susceptibility to damage
from impacts. Performance tires (summer applications) have reduced traction in ambient temperatures below 40° F (5° C),
and are not recommended in snow/ice conditions. Performance tires can temporarily harden when cold, causing you to hear
rotational noise for the first few miles (kilometers) until the tires warm up.
Using Tire Chains
Tesla has tested and approved the following tire chains (also called snow chains) to increase traction in snowy conditions. Tire
chains should only be installed on the rear tires. The approved tire chains can be purchased from Tesla.
Tire Size

Recommended Chain

18"/19"

König CG-9 103

20"

König K-SUMMIT K34

Tire Size

Recommended Chain

18"

König CG-9 102

19"

König CG-9 103

Tire Size

Recommended Chain

20"/22"

KONIG K-SUMMIT K67

Tire Size

Recommended Chain

20"

KONIG K-SUMMIT K67

768

Owner's Manual

Owners Manual
Do not use tire chains on 22" tires.
Tire Size

Recommended Chain

19"

KONIG K-SUMMIT K45

Do not use tire chains on 21" tires.
Tire Size

Recommended Chain

19"/20"

KONIG XG-12 PRO SIZE 252

21"

KONIG K-SUMMIT XXL K66
CAUTION: If your CybertruckModel SModel XModel 3Model Y is equipped with aero covers, you must remove them
before installing tire chains (see Removing and Installing Aero Covers on page 758). Failure to do so can cause damage
not covered by the warranty.
CAUTION: Do not put tire chains on summer tires, doing so can cause damage.

When installing tire chains, follow the instructions and warnings provided by the tire chain manufacturer. Mount them evenly
and as tight as possible.
When using tire chains:
• Inspect the tire chains for loose fittings and damaged links before each use.
• Set air suspension (if equipped) to StandardMedium and turn off the Default Ride Height to Low setting (see Air Suspension
on page 471Air Suspension on page 474Air Suspension on page 476).
• Set air suspension to Medium and turn off the Default Ride Height to Low setting.
• Avoid heavily loading CybertruckModel SModel XModel 3Model Y (heavy loads can reduce the clearance between the tires
and the body).
• Do not drive the vehicle without the chains properly installed.
• Drive slowly. Do not exceed 30 mph (48 km/h).
• Remove the tire chains as soon as conditions allow.
NOTE: Tire chains are prohibited in some jurisdictions. Check local laws before installing tire chains.
CAUTION: Air suspension (if equipped ) should remain in the Medium ride height setting to avoid damage.
CAUTION: Using non-recommended tire chains, or using tire chains on other sized tires can damage the suspension,
body, wheels, and/or brake lines. Damage caused by using non-recommended tire chains, or incorrectly installing tire
chains, is not covered by the warranty.
CAUTION: Do not use snow chains on the front tires.
CAUTION: Never deflate your tires to put on tire chains. When re-inflated, the chains might fit too tightly and cause tire
damage.
CAUTION: Ensure that the tire chains cannot touch suspension components or brake lines. If you hear the chains making
unusual noises that would indicate contact with CybertruckModel SModel XModel 3Model Y, stop and investigate
immediately.

Owner's Manual

769

Owners Manual
Temporary Tire Repair
Tire Repair Kit
Your CybertruckModel SModel XModel 3Model Y has no spare tire. Depending on the legislations that apply to the region in
which you purchased CybertruckModel SModel XModel 3Model Y, a tire repair kit may or may not be included. If a tire repair
kit was not provided in CybertruckModel SModel XModel 3Model Y upon delivery, you can purchase one from Tesla.
NOTE: Although CybertruckModel SModel XModel 3Model Y does not have a spare tire, in the event of a flat tire, Roadside
Assistance provides towing coverage for up to 50 miles.
The tire repair kit consists of a compressor and a canister of tire sealant (enough to repair one tire). When injected into a tire,
the sealant can penetrate a small puncture up to 1/4" (6 mm) to form a temporary repair.

NOTE: For punctures larger than 1/4” (6 mm), severe tread damage, a damaged sidewall, ripped tires or tires that have come
off the rim, contact Roadside Assistance.
WARNING: The tire repair kit is a temporary repair only. You must repair or replace a damaged tire as soon as possible.
WARNING: Do not exceed 30 mph (48 km/h) when driving with a tire that has been temporarily repaired with sealant.
WARNING: Follow all directions and warnings on the tire repair kit before starting a repair.
CAUTION: Do not drive on a deflated tire as this can cause serious damage.
Tire Sealant Canister

The tire sealant provided in the Tesla tire repair kit is approved for use with CybertruckModel SModel XModel 3Model Y and is
designed not to damage the TPMS (Tire Pressure Monitoring System) sensors. Therefore, you must replace it only with one of
the same type and capacity (see Replacing the Sealant Canister on page 773). Tire sealant canisters can be purchased from
Tesla.
The tire sealant has an expiration date printed on the outside of the canister. If the expiration date has passed, the sealant
might not work as expected. Always replace an expired tire sealant canister.
WARNING: Do not use any tire sealant other than the one available from Tesla. Doing so could cause tire pressure
sensors to malfunction.
WARNING: Always read and follow the safety and handling instructions printed on the sealant canister.
WARNING: Keep tire sealant out of the reach of children.
WARNING: Tire sealant can be harmful if it contacts the eyes or if swallowed or inhaled. If the sealant comes into contact
with your eyes, immediately flush with water and seek medical attention if irritation persists. If swallowed, do not induce
vomiting and seek medical assistance immediately. If inhaled, breathe fresh air. Inhalation can cause drowsiness and
dizziness. If breathing is affected, seek medical assistance immediately.

770

Owner's Manual

Owners Manual
Inflating with Sealant and Air
If you have a Tesla tire repair kit, follow these steps to temporarily repair a small tire puncture (less than 1/4” (6 mm)).
1. Stop CybertruckModel SModel XModel 3Model Y in a safe place away from traffic and ask passengers to wait in a safe
area.
2. Turn on the hazard warning flashers to alert other road users.
3. If possible, position the wheel with the puncture at the bottom.
4. Detach the power supply connector from the back of the compressor and plug it into the low voltage power socket located
on the front of center console.

5. Release the clear plastic hose from the tire compressor.
6. Remove the red cap and screw the end of the hose onto the tire’s valve.

7. Attach the sealant kit’s black air hose to the sealant valve and press the lever down to secure it in place.

Owner's Manual

771

Owners Manual

8. Ensure the compressor is lying on a level surface with the pressure gauge facing to the side as shown in Step 5.
9. Turn on the compressor.
10. Inflate the tire to the recommended pressure.
11. Turn off the compressor and disconnect the hose from the tire’s valve. Wipe any excess sealant from the tire valve and
wheel rim.
12. Immediately drive for 5 miles (8 km) to distribute the sealant around the tire. Do not exceed 30 mph (48 km/h).
13. Stop and check the tire’s pressure. If necessary, inflate using the black air hose.
14. Have the tire repaired or replaced as soon as possible.
15. Replace the tire repair sealant canister (see Replacing the Sealant Canister on page 773).
Inflating with Air Only
If you have a Tesla tire repair kit, follow these steps to inflate a tire with air:
1. Detach the power supply connector from the rear of the compressor and plug it into the low voltage power socket located
in CybertruckModel SModel XModel 3Model Y on the front of center console.

2. Release the black air hose from the compressor.
3. Attach the air hose to the valve and press the lever down to secure it in place.
772

Owner's Manual

Owners Manual

4. Ensure the compressor is lying on a level surface with the pressure gauge facing to the side where you can read it.
5. To add air, turn on the compressor and inflate until the desired pressure is reached.
6. To release air, turn off the compressor, then press and hold the red button until the desired pressure is reached.
NOTE: For your convenience, the tire repair kit includes a selection of adapters that allow you to inflate other items. These
adapters are located in a compartment on the back of the compressor.

CAUTION: To avoid overheating, do not use the compressor continuously for more than eight minutes. Allow the
compressor to cool for 15 minutes between uses.
CAUTION: The compressor runs slowly when overheated from excessive use. Turn it off and allow it to cool.
Replacing the Sealant Canister
If you have a Tesla tire repair kit, you can purchase additional or replacement canisters of tire sealant from Tesla.
Follow these steps to replace the canister in your Tesla tire repair kit:
1. Unwrap the clear hose from the compressor. This hose is included with the tire repair sealant canister.
2. Remove the canister cover by sliding it upward to release it from the compressor.

Owner's Manual

773

Owners Manual

3. Remove the canister.

4. Insert the new canister and replace the cover.

774

Owner's Manual

Owners Manual
Cleaning
Cleaning the Exterior
To prevent damage to the exterior, immediately remove corrosive substances (such as grease, oil, bird droppings, tree resin,
dead insects, tar spots, road salt, industrial fallout, etc.). Do not wait until CybertruckModel SModel XModel 3Model Y is due
for a complete wash. If necessary, use denatured alcohol to remove tar spots and stubborn grease stains, then immediately
wash the area with water and a mild, non-detergent soap to remove the alcohol.
NOTE: It is normal for the stainless steel exterior to mature over time, resulting in minor changes to the reflective properties
and color of the metal.
Dents and Scratches
The stainless steel exterior of CybertruckModel SModel XModel 3Model Y is more resistant to dents and dings than most
other vehicles. However, CybertruckModel SModel XModel 3Model Y does not have a clear coat on the surface of the exterior
body panels, meaning any scratches that appear are in the stainless steel panels themselves. Anyone performing scratch
repair should refer to the applicable "Exterior Stainless Steel Panel Refinishing" procedure within the Collision Repair Manual
on service.tesla.com. In addition, do not use, and/or immediately remove, chemical, corrosive, or non-pH neutral substances
(including but not limited to: acidic liquids or materials, grease, oil, tree resin, dead insects, tar spots, road salt, industrial
fallout, etc.) as they can cause corrosion on the vehicle's exterior.
CAUTION: Tesla is not liable for any damage caused by failing to refer to official guidance.
To prevent damage to the paint, immediately remove corrosive substances (grease, oil, bird droppings, tree resin, dead
insects, tar spots, road salt, industrial fallout, etc.). Do not wait until CybertruckModel SModel XModel 3Model Y is due for a
complete wash. If necessary, use denatured alcohol to remove tar spots and stubborn grease stains, then immediately wash
the area with water and a mild, non-detergent soap to remove the alcohol.
Surface Contamination