NHTSA ID Number: 11001847
Manufacturer Communication Number: 2024.20_0524.pdf
TSB/Document Date: 2024-06-19
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
492
Owner's Manual
Owners Manual
Vehicle Hold
When CybertruckModel SModel XModel 3Model Y is stopped, Vehicle Hold can continue to apply the brakes even after you
remove your foot from the brake pedal.
Vehicle Hold will activate:
Vehicle Hold will activate:
• Hold: Vehicle Hold is automatically enabled any time the vehicle comes to a complete stop.
• Hold: Vehicle Hold is automatically enabled any time the vehicle comes to a complete stop.
• Creep or Roll: Vehicle Hold is enabled automatically anytime the vehicle is at a standstill and the brake is pressed to the
floor ( Roll is the default setting on your vehicle).
• Hold: Vehicle Hold is automatically enabled any time the vehicle comes to a complete stop.
• Creep or Roll: Vehicle Hold is enabled automatically anytime the vehicle is at a standstill and the brake is pressed to the
floor.
When the vehicle's stopping mode is set to Hold, Vehicle Hold is automatically enabled any time the vehicle comes to a
complete stop.
This indicator displays on the instrument paneltouchscreen whenever Vehicle Hold is actively braking
CybertruckModel SModel XModel 3Model Y.
To disengage Vehicle Hold, press the accelerator pedal or press and release the brake pedal.
NOTE: Shifting into Neutral also disengages Vehicle Hold.
NOTE: After actively braking CybertruckModel SModel XModel 3Model Y for approximately ten minutes,
CybertruckModel SModel XModel 3Model Y shifts into Park and Vehicle Hold cancels. CybertruckModel SModel XModel
3Model Y also shifts into Park if it detects that the driver has left the vehicle.
Owner's Manual
493
Owners Manual
Vehicle Hold
When CybertruckModel SModel XModel 3Model Y is stopped, Vehicle Hold can continue to apply the brakes even after you
remove your foot from the brake pedal.
Vehicle Hold will activate:
Vehicle Hold will activate:
• Hold: Vehicle Hold is automatically enabled any time the vehicle comes to a complete stop.
• Hold: Vehicle Hold is automatically enabled any time the vehicle comes to a complete stop.
• Creep or Roll: Vehicle Hold is enabled automatically anytime the vehicle is at a standstill and the brake is pressed to the
floor ( Roll is the default setting on your vehicle).
• Hold: Vehicle Hold is automatically enabled any time the vehicle comes to a complete stop.
• Creep or Roll: Vehicle Hold is enabled automatically anytime the vehicle is at a standstill and the brake is pressed to the
floor.
When the vehicle's stopping mode is set to Hold, Vehicle Hold is automatically enabled any time the vehicle comes to a
complete stop.
This indicator displays on the instrument paneltouchscreen whenever Vehicle Hold is actively braking
CybertruckModel SModel XModel 3Model Y.
To disengage Vehicle Hold, press the accelerator pedal or press and release the brake pedal.
NOTE: Shifting into Neutral also disengages Vehicle Hold.
NOTE: After actively braking CybertruckModel SModel XModel 3Model Y for approximately ten minutes,
CybertruckModel SModel XModel 3Model Y shifts into Park and Vehicle Hold cancels. CybertruckModel SModel XModel
3Model Y also shifts into Park if it detects that the driver has left the vehicle.
494
Owner's Manual
Owners Manual
Hill Start Assist
Hill Start Assist automatically engages the brakes for approximately one second when on a hill. This prevents
CybertruckModel SModel XModel 3Model Y from rolling during the time it takes for you to move your foot from the brake
pedal to the accelerator pedal. Hill Start Assist engages the brakes only if CybertruckModel SModel XModel 3Model Y is in
Drive and facing uphill, or in Reverse and facing downhill.
WARNING: After approximately one second, Hill Start Assist no longer brakes your vehicle and it could roll. Therefore,
quickly move your foot from the brake pedal to the accelerator pedal. Never rely on Hill Start Assist to prevent
CybertruckModel SModel XModel 3Model Y from rolling for more than one second. Failure to do so can result in a
collision.
Owner's Manual
495
Owners Manual
Traction Control
How It Works
The traction control system constantly monitors the speed of the front and rear wheels. If CybertruckModel SModel XModel
3Model Y experiences a loss of traction, the system minimizes wheel spin by controlling brake pressure and motor power. By
default, the traction control system is on. Under normal conditions, it should remain on to ensure maximum safety.
This yellow indicator flashes on the instrument paneltouchscreen whenever the traction control system is
actively controlling brake pressure and motor power to minimize wheel spin. If the indicator stays on, a fault is
detected with the traction control system. Contact Tesla Service.
WARNING: If the above indicator remains illuminated in situations in which you have not disabled the traction control
system (described next), the traction control system may not be operating correctly. Contact Tesla Service immediately.
WARNING: Traction control cannot prevent collisions caused by driving dangerously or turning too sharply at high
speeds.
Disabling Traction Control
Under normal conditions, the traction control system should remain enabled. Disable it only in circumstances where you
deliberately want the wheels to spin, such as:
• Starting on a loose surface, such as gravel or snow.
• Driving in deep snow, sand or mud.
• Rocking out of a hole or deep rut.
To allow the wheels to spin, touch Controls > Pedals & Steering > Dynamics > Slip Start.
The instrument paneltouchscreen displays an alert message when traction control is turned off.
Although the traction control system automatically reactivates the next time you start CybertruckModel SModel XModel
3Model Y, it is strongly recommended that you enable it immediately after the circumstances that required you to disable it
have passed.
NOTE: Traction Control can not be disabled when you are actively using cruise control.
Allowing Wheel Slip
To allow the wheels to spin at a limited speed, you can enable Slip Start. Slip Start can be enabled only when
CybertruckModel SModel XModel 3Model Y is moving 30 mph (48 km/h) or slower. Slip Start automatically disables when the
speed exceeds 50 mph (80 km/h).Slip Start can be enabled at any speed, however it is less effective at higher speeds.
Under normal conditions, Slip Start should not be enabled. Enable it only in circumstances where you deliberately want the
wheels to spin, such as:
• Starting on a loose surface, such as gravel or snow.
• Driving in deep snow, sand or mud.
• Rocking out of a hole or deep rut.
To allow the wheels to spin, touch Controls > Pedals & Steering > Dynamics > Slip Start.
496
Owner's Manual
Owners Manual
The instrument paneltouchscreen displays an alert message when Slip Start is enabled.
Although Slip Start is automatically disabled the next time you start CybertruckModel SModel XModel 3Model Y, it is strongly
recommended that you disable it immediately after the circumstances that required you to enable it have passed.
NOTE: Slip Start can not be enabled when you are actively using cruise control.
Disabling Traction Control
Under normal conditions, the traction control system should remain on. Turn it off only in circumstances where you
deliberately want the wheels to spin, such as:
• Starting on a loose surface, such as gravel or snow.
• Driving in deep snow, sand or mud.
• Rocking out of a hole or deep rut.
• Driving off-road.
On Rear-Wheel Drive vehicles, turn off traction control and allow the wheels to spin by touching Controls > Dynamics > Slip
Start.
On All-Wheel Drive vehicles, you can choose one of these options, depending on the circumstances:
• Slip Start is designed to make it easier to dislodge Model Y when stuck in mud, snow, ice, etc. Turning on Slip Start allows
the wheels to spin, making it possible to rock Model Y out of a situation in which the wheels are stuck.
• Off-Road Assist is designed to provide overall improvements when driving off-road. In addition to allowing the wheels to
spin, Off-Road Assist balances the torque between the front and rear motors to optimize traction. Off-Road Assist
improves traction on rough and soft surfaces where one side of the vehicle may lose traction while the other side still has
traction. When Off-Road Assist is on, the accelerator pedal provides more gradual torque, which is useful for crawling at
low speeds (for example, over rocky surfaces). When enabled, OFF-ROAD displays on the touchscreen above the driving
speed.
After the circumstances that required you to turn on Slip Start or Off-Road Assist have passed, it is strongly recommended
that you turn the setting off to re-enable traction control. If you leave these settings on, Traction Control automatically reenables on your next drive.
When you turn on Slip Start or Off-Road Assist, the touchscreen displays an indicator light to indicate that the
traction control system is no longer preventing wheel slip.
NOTE: Although you can use Slip Start and Off-Road Assist at any speed, it is less effective at higher speeds.
NOTE: Slip Start and Off-Road Assist are not available when you are actively using Autopilot.
NOTE: Engaging cruise control when Slip Start or Off-Road Assist is on causes the feature to turn off and traction control to
be re-enabled.
NOTE: Automatic Emergency Braking and Lane Departure Avoidance do not operate when Off-Road Assist is turned on.
Acceleration Modes
Touch Controls > Dynamics > Acceleration to adjust the amount of acceleration you experience when driving
CybertruckModel SModel XModel 3Model Y:
• Chill: Limits acceleration for a smooth and gentle ride.
NOTE: When Chill is selected, Chill displays on the touchscreen above the driving speed.
Owner's Manual
497
Owners Manual
• Standard: (Non-Performance vehicles)(Non-Performance vehicles) Provides the normal level of acceleration.
NOTE: If equipped with the Acceleration Upgrade package, the modes of acceleration are Chill and Sport.
NOTE: If equipped with the Acceleration Upgrade package, the modes of acceleration are Chill and Sport.
• Sport: (Performance vehicles/Acceleration Upgrade package) Provides the normal level of acceleration.
• Sport: (Performance vehicles/Acceleration Upgrade package) Provides the normal level of acceleration.
• Insane: (Performance vehicles) Provides the maximum level of acceleration immediately available.
NOTE: Using the increased torque and power available in Insane can reduce range and efficiency.
NOTE: Insane strives to keep the Battery within an optimal temperature range. In addition to heating the Battery, these
settings also cool the Battery when necessary (for example, while driving at high speeds, during rapid acceleration, driving
for long periods, etc.).
You can improve the efficiency of the cabin heating by reducing your selected acceleration mode. This allows the heat pump
system to take more heat from the Battery to efficiently heat the cabin, instead of maintaining the Battery's ability to provide
peak acceleration performance. This helps to maximize driving efficiency in colder weather. Note that when subsequently
increasing the acceleration mode, the Battery requires time to warm up before the increased level of acceleration is available.
You can improve the efficiency of the cabin heating by reducing your selected acceleration mode. This allows the heat pump
system to take more heat from the Battery to efficiently heat the cabin, instead of maintaining the Battery's ability to provide
peak acceleration performance. This helps to maximize driving efficiency in colder weather. Note that when subsequently
increasing the acceleration mode, the Battery requires time to warm up before the increased level of acceleration is available.
If your vehicle is equipped with a heat pump (to determine if your vehicle has a heat pump, touch Controls > Software >
Additional Vehicle Information), you can improve the efficiency of the cabin heating by reducing your selected acceleration
mode. This allows the heat pump system to take more heat from the Battery to efficiently heat the cabin, instead of
maintaining the Battery's ability to provide peak acceleration performance. This helps to maximize driving efficiency in colder
weather. Note that when subsequently increasing the acceleration mode, the Battery requires time to warm up before the
increased level of acceleration is available.
498
Owner's Manual
Owners Manual
Acceleration Modes
The acceleration settings available on your CybertruckModel SModel XModel 3Model Y vary depending on date of
manufacture and options chosen at time of purchase:
• Chill: limits acceleration for a smooth and gentle ride (available on all vehicles equipped with Autopilot hardware).
• Standard: provides the normal level of acceleration (available on non-Performance All-Wheel Drive vehicles and Rear
Wheel Drive Model S vehicles equipped with Autopilot hardware).
• Sport: provides the normal level of acceleration (available on Performance All-Wheel Drive vehicles).
• Insane: increases peak torque by approximately 30 percent (available on Performance All-Wheel Drive vehicles not
equipped with the Ludicrous upgrade).
• Ludicrous: increases peak torque by approximately 60 percent (available on Performance All-Wheel Drive vehicles
equipped with the Ludicrous upgrade).
• Insane+: increases peak torque by approximately 30 percent (available on Performance All-Wheel Drive vehicles not
equipped with the Ludicrous upgrade) while also heating up the Battery to its ideal operating temperature to ensure access
to 100% of available power. Before choosing this setting, read about Using Insane+ or Ludicrous+ on page 499.
• Ludicrous+: increases peak torque by approximately 60 percent (available on Performance All-Wheel Drive vehicles
equipped with the Ludicrous upgrade) while also immediately heating up the Battery to its ideal operating temperature to
ensure access to 100% of available power. Before choosing this setting, read about Using Insane+ or Ludicrous+ on page
499.
NOTE: Although Chill does not directly improve driving range, using the increased torque and power available in Insane or
Ludicrous mode can reduce range and efficiency.
NOTE: When Chill is selected, Chill displays on the instrument paneltouchscreen above the driving speed.
In addition, a Performance All-Wheel Drive CybertruckModel SModel XModel 3Model Y also features Launch Mode to provide
optimum acceleration on surfaces with good traction. For the specific driving instructions required to use Launch Mode, see
Launch Mode on page 500.
To choose an acceleration mode, touch Controls > Pedals & Steering > Acceleration.
Using Insane+ or Ludicrous+
If you choose Insane or Ludicrous, additional power is available immediately. However, to achieve the absolute maximum
power (designed for short term use), you can choose Insane+ or Ludicrous+ to heat the Battery to its ideal operating
temperature. This ensure access to 100% of available power.
While the battery is being heated, the touchscreen displays a status message providing you with an approximate wait time,
and letting you know when the additional power is available. In addition to heating the Battery, Insane+ and Ludicrous+ modes
strive to keep the Battery within an optimal temperature range. Therefore, under aggressive driving scenarios, you may also
see the “Cooling” status for several minutes until temperatures fall. CybertruckModel SModel XModel 3Model Y stays in the
chosen mode for three hours, even if you leave the vehicle. After three hours, the feature times out.
NOTE: Insane+ and Ludicrous+ are designed to achieve maximum performance for short term acceleration. These settings are
not intended for daily driving. The tradeoff for the additional power boost is extra energy consumption and earlier power fade
on long drives. The Insane or Ludicrous acceleration settings provide a significant increase in performance even without
choosing the Insane+ or Ludicrous+ setting to achieve maximum Battery power. In fact, in normal driving situations, the
additional power that can be achieved using Insane+ and Ludicrous+ may be unnoticeable.
NOTE: To support Insane+ or Ludicrous+, the charge level must be 20% or higher. You cannot initiate these settings if the
charge level is less than 20%. In addition, these settings immediately cancel if at any time during use, the charge level drops
below 20%.
When using Insane+ or Ludicrous+, CybertruckModel SModel XModel 3Model Y consumes more energy to keep the Battery
within an optimal temperature range.
To cancel Insane+ or Ludicrous+ at any time, change the acceleration level to another setting. To prevent excess and
potentially unnecessary energy consumption (for example, you leave the vehicle and forget to cancel Insane+ or Ludicrous+),
these settings cancel automatically in three hours, regardless of whether you are still driving or have left the vehicle.
Owner's Manual
499
Owners Manual
NOTE: Insane+ or Ludicrous+ strives to keep the Battery within an optimal temperature range. In addition to heating the
Battery, these settings also cool the battery when necessary (for example, while driving at high speeds, during rapid
acceleration, driving for long periods, etc.).
Launch Mode
Launch Mode, available on Performance All-Wheel Drive vehicles only, provides optimum acceleration on surfaces with good
traction.
NOTE: Hard acceleration including, but not limited to, using launch mode, increases stress on the vehicle’s powertrain, and can
cause premature wear and aging of various components. CybertruckModel SModel XModel 3Model Y constantly monitors
powertrain fatigue and damage, and notifies you if vehicle components need to be serviced.
WARNING: Use Launch Mode only in appropriate locations where there is no cross traffic or pedestrians present. Launch
Mode is designed for use on closed circuit driving courses. It is the driver’s responsibility to ensure that driving style
and acceleration do not endanger or inconvenience other road users.
To Activate Launch Mode
1. Ensure the brakes are slightly warm by driving for a few minutes and using the brakes a few times.
2. Set the air suspension to Low (see Air Suspension on page 471Air Suspension on page 474Air Suspension on page 476).
3. Set the air suspension to Low or Very Low (see Air Suspension on page 471Air Suspension on page 474Air Suspension on
page 476).
4. Set the acceleration level to Insane+ or Ludicrous+ (if equipped).
NOTE: If equipped with the Ludicrous+ setting, you can achieve optimum performance by pressing and holding this setting
for three seconds.
5. With CybertruckModel SModel XModel 3Model Y shifted into Drive and at a complete stop with the steering wheel
straight, firmly hold the brake pedal with your left foot, then fully press the accelerator pedal. Within one second, the
instrument panel displays a message indicating that Launch Mode is enabled.
NOTE: Launch mode further lowers the front suspension, significantly reducing ground clearance.
6. Within twelve seconds of Launch Mode being enabled, release the brake pedal to launch the vehicle.
When you release the brake, CybertruckModel SModel XModel 3Model Y launches forward.
NOTE: Launch Mode is not available if Traction Control has been disabledSlip Start has been enabled (which allows the wheels
to spin). See Traction Control on page 496.
NOTE: Launch Mode is available only if the ambient temperature is 37° F (3° C) or warmer.
500
Owner's Manual
Owners Manual
Acceleration Modes
Touch Controls > Pedals & Steering > Acceleration to choose a preferred acceleration mode:
• Chill limits acceleration for a slightly smoother and gentler ride.
NOTE: When Chill is selected, Chill displays on the instrument panel, above the driving speed.
• Sport provides the normal level of acceleration.
• Insane (called Plaid on performance vehicles, if equipped) provides the maximum level of acceleration immediately
available.
NOTE: Using the increased torque and power available in Insane or Plaid mode can reduce range and efficiency.
NOTE: Insane or Plaid strives to keep the Battery within an optimal temperature range. In addition to heating the Battery,
these settings also cool the Battery when necessary (for example, while driving at high speeds, during rapid acceleration,
driving for long periods, etc.).
NOTE: You can improve the efficiency of the cabin heating by reducing your selected acceleration mode. This allows the heat
pump system to take more heat from the Battery to efficiently heat the cabin, instead of maintaining the Battery's ability to
provide peak acceleration performance. This helps to maximize driving efficiency in colder weather. Note that when
subsequently increasing the acceleration mode, the Battery requires time to warm up before the increased level of
acceleration is available.
In addition, CybertruckModel SModel XModel 3Model Y features Drag Strip Mode. Using Drag Strip Mode to precondition
your CybertruckModel SModel XModel 3Model Y is useful before a short distance race.
Drag Strip Mode
Drag Strip Mode preconditions the Battery and drive unit to ideal operating temperatures for timed acceleration.
CybertruckModel SModel XModel 3Model Y stays in Drag Strip Mode for three hours, even if you leave the vehicle. After
three hours, the feature times out to prevent unnecessary energy consumption (for example, you leave the vehicle and forget
to cancel Drag Strip Mode).
When using Drag Strip Mode, CybertruckModel SModel XModel 3Model Y consumes more energy to keep the Battery within
an optimal temperature range.
Cancel Drag Strip Mode at any time by toggling Drag Strip Mode off.
NOTE: Drag Strip Mode automatically disables Slip Start when enabled.
WARNING: Drag Strip Mode is designed for use on closed circuit driving courses only. It is the driver’s responsibility to
ensure that driving style and acceleration do not endanger or inconvenience other road users.
How to Launch the Vehicle
The touchscreen provides visual instructions on how to launch:
1. Touch Controls > Pedals & Steering > Drag Strip Mode.
2. Wait for the instrument panel to indicate that the vehicle is Peak Performance Ready.
3. With CybertruckModel SModel XModel 3Model Y shifted into Drive and at a complete stop, firmly hold the brake pedal
with your left foot, then fully press the accelerator pedal.
4. Once step 3 is complete, the front suspension begins lowering into a "cheetah stance".
NOTE: Suspension lowering for "cheetah stance" significantly reduces ground clearance.
5. Wait for the instrument panel to indicate that Drag Strip Mode is Ready to Launch.
6. Once you see "Cheetah Stance Enabled" and "Ready to launch" on the instrument panel, release the brake pedal to launch
the vehicle.
Owner's Manual
501
Owners Manual
Suspension
Available on Performance vehicles only, touch Controls > Dynamics > Ride & Handling for settings that provide real-time
adjustments to the suspension system to optimize both ride and handling. Choose from:
• Standard- Adjusts to a wide range of roads and driving styles, providing a fluid yet well controlled ride.
• Sport - Provides a firmer, more controlled ride that increases driver engagement and connection to the road.
NOTE: Settings for Ride & Handling are disabled when Track Mode (if equipped) is engaged. Track Mode automatically
optimizes adaptive damping settings to support aggressive driving on a closed circuit driving course (see Track Mode on page
502).
Track Mode
Track Mode, available only on Performance CybertruckModel SModel XModel 3Model Y vehicles, is designed to modify the
stability control, traction control, regenerative braking, and cooling systems to increase performance and handling while
driving on closed circuit courses. Track Mode improves cornering ability by intelligently using the motors, and regenerative
and traditional braking systems. When enabled, the cooling system runs at an increased level before, during, and after
aggressive driving sessions to allow your vehicle’s systems to withstand the surplus heat.
NOTE: Track Mode is designed and calibrated for a Performance CybertruckModel SModel XModel 3Model Y equipped with
performance brakes and tires. Vehicles without performance brakes and tires may experience comparatively lower
performance and endurance.
WARNING: Track Mode is designed for use on closed circuit driving courses only. It is the driver’s responsibility to drive
safely and ensure others are not endangered.
WARNING: Track Mode is designed for use by experienced track drivers familiar with the course. Do not use on public
roads. It is the driver’s responsibility to be in control of the vehicle at all times, including on the track. Because vehicle
behavior (including traction and stability control) differs when using Track Mode, always use caution.
Using Track Mode
Track Mode is always disabled when you start CybertruckModel SModel XModel 3Model Y. To enable Track Mode for your
current drive, shift into Park and follow these steps:
1. Touch Controls > Dynamics > Track Mode.
When enabled, TRACK displays on the touchscreen above the driving speed, and a Track Mode pop up window appears on
the map. The car status area of the touchscreen displays a color-coded image of your CybertruckModel SModel XModel
3Model Y that provides you with important at-a-glance status information about the Battery, the motors, the tires and the
brakes. See Monitoring Vehicle Health on page 504.
2. If desired, customize the Track Mode settings by touching Track Mode Settings on the Track Mode pop up window (see
Customizing Track Mode on page 503). You can also access the Track Mode settings by touching Controls > Dynamics,
then touching Customize next to the Track Mode setting.
NOTE: For optimum performance, wait for the battery and motor temperatures to reduce if highlighted in yellow or red.
3. If you want to use the Lap Timer, follow the onscreen instructions to drop a pin on the map to define the lap's start/finish
location. You will then need to press START on the Lap Timer to begin your driving session. Once started, the Lap Timer
starts counting when you drive CybertruckModel SModel XModel 3Model Y past the lap's start/finish location where you
dropped the pin. See Using the Lap Timer on page 504.
4. Shift and GO!
If you started the Lap Timer, each time you pass the start/finish location, the timer resets for the next lap. See Using the
Lap Timer on page 504.
You can also view a real-time accelerometer (G-meter) by swiping the Cards area of the touchscreen. See G-Meter on
page 505.
When Track Mode is on:
502
Owner's Manual
Owners Manual
◦ Autopilot features are unavailable.
◦ The Slip Start setting is overridden.
◦ The Regenerative Braking setting is overridden.
◦ Stopping Mode is set to the Roll setting in which CybertruckModel SModel XModel 3Model Y is free-rolling at very low
speeds whenever Drive or Reverse is engaged and both the accelerator and brake pedal are released. For details, see
Stopping Mode on page 466.
◦ Stopping Mode is set to the Roll setting in which CybertruckModel SModel XModel 3Model Y is free-rolling at very low
speeds whenever Drive or Reverse is engaged and both the accelerator and brake pedal are released. For details, see
Stopping Mode on page 467.
◦ Energy usage increases.
◦ Entertainment features are unavailable.
Use the touchscreen setting to turn Track Mode off at any time. Powering off CybertruckModel SModel XModel 3Model Y
also turns off Track Mode (although it may still appear on the touchscreen if Post-Drive cooling is in progress). When Track
Mode is off, all settings return to their previous state and all features return to their normal operating state.
CAUTION: Driver assistance features are automatically disabled when Track Mode is On. It is the driver’s
responsibility to drive safely and be in control of the vehicle at all times. Driver assistance features automatically reenable when Track Mode is turned Off.
Customizing Track Mode
To customize Track Mode, touch Track Mode Settings on the Track Mode popup window that appears on the map when you
enable Track Mode. You can also access the Track Mode settings by touching Controls > Dynamics, then touching Customize
next to the Track Mode setting. Choose an existing Track Mode setting from the list of pre-defined profiles provided by Tesla.
Or create a new settings profile by touching Add New Settings, entering a name for the settings profile, then adjusting these
settings to suit your preferences or driving scenario, or customize for a specific track:
• Handling Balance - Drag the slider to customize the balance of CybertruckModel SModel XModel 3Model Y in a turn. If
CybertruckModel SModel XModel 3Model Y is too loose, you can choose a front-biased under-steering setup. Difficult to
get the vehicle through a turn? Try a rear-biased setup to increase rotation. You can select any value, in 5% increments,
between 100/0 (for 100% front biased used for under-steering) and 0/100 (for 100% rear biased used for over-steering).
• Stability Assist - Drag the slider to choose the level at which the stability control systems assist in controlling the vehicle.
You can choose any level from -10 to +10. Choosing +10 engages all stability assist systems for controllable driving in
which stability systems remain engaged, whereas -10 disables all stability systems and the stability of the drive rests solely
on the driver. The default setting of 0 represents a balance which provides some stability being automatically controlled
and leaving some control up to the driver.
• Stability Assist - Drag the slider to choose the level at which the stability control systems assist in controlling the vehicle.
You can choose any level from -10 to +10. Choosing +10 engages all stability assist systems for controllable driving in
which stability systems remain engaged, whereas -10 disables all stability systems and the stability of the drive rests solely
on the driver. The default setting of 0 represents a balance which provides some stability being automatically controlled
and leaving some control up to the driver.
• Stability Assist - Choose the level at which the stability control systems assist in controlling the vehicle. Stability Assist
modifies motor torque and selectively applies the brakes to each wheel to make the vehicle more stable and help the driver
maintain control.
WARNING: Drive with caution when customizing Stability Assist. If you lose control of
CybertruckModel SModel XModel 3Model Y, less stability control intervention will be applied and the vehicle may
not stabilize itself. Use only if you have advance experience driving beyond grip limits.
◦ Reduced: Provides the maximum amount of stability control intervention while in track mode. Stability control is
reduced compared to on-road mode.
◦ Minimal: Provides minimal amount of stability control intervention.
◦ Off: Oversteer support is completely disabled and traction control is limited to allow wheel spin.
• Regenerative Braking - Drag the slider to choose how much regenerative braking is available. You can choose any value, in
5% increments, between 0 and 100%. Tesla recommends the 100% setting to prevent overheating the brakes.
Owner's Manual
503
Owners Manual
• Post-Drive Cooling - Enable if you want the cooling systems to continue cooling the vehicle's components even after you
leave the vehicle. Cooling stops automatically when the components are sufficiently cool, or when you power
CybertruckModel SModel XModel 3Model Y off and back on again. Post-Drive Cooling is useful if you want to quickly cool
the components between driving sessions. If Post-Drive Cooling is set to OFF, the components eventually cool, but it takes
longer.
• Compressor Overclock - Enable if you want to run the cooling compressor beyond its normal operating rate. Doing so
speeds up the cooling process and is useful when performing multiple aggressive driving sessions with very little time in
between
CAUTION: Extensive use of Compressor Overclock can damage or shorten the life of the compressor. Damage
caused by using this feature is not covered by the warranty.
• Save Dashcam for Laps - Enable if you want to save a video and data on a USB flash drive when using the Lap Timer. A USB
flash drive must be set up and inserted as described (see USB Drive Requirements for Recording Videos on page 664). The
USB flash drive must contain a folder named TeslaTrackMode. When enabled, Track Mode stores a video and associated
data for each lap. Track Mode also stores the car status and telemetry data with details about the vehicle's position, speed,
acceleration, use of accelerator, etc. You can then view the video recordings and analyze this data, which is saved as
a .CSV file on the USB flash drive, to determine where time is being lost or gained.
NOTE: For some vehicles manufactured after approximately November 1, 2021, the center console USB ports may only
support charging devices. Use the USB port inside the glove box for all other functions.
Track Mode allows you to save up to 20 settings profiles. To delete a chosen profile, touch Delete at the bottom of the settings
screen.
NOTE: You can not change or delete a pre-defined profile provided by Tesla.
Using the Lap Timer
When you enable Track Mode, the map displays a Lap Timer. Follow the onscreen instructions to place a start/finish pin on the
map. Once the pins are placed, press START to initiate the driving (lapping) session. When you drive
CybertruckModel SModel XModel 3Model Y through the start/finish location, the Lap Timer automatically starts timing the
duration of the lap, resetting the timer whenever you pass the start/finish location, and displaying the real-time delta between
the current lap and the fastest lap so far in the driving session. The map highlights the track in blue.
At the completion of each lap, the Lap Timer displays the duration of the lap. It also displays the times associated with the
previous and best laps in the driving session.
If Save Dashcam for Laps is on (see Customizing Track Mode on page 503), and a properly formatted USB flash drive is
inserted in a front USB port, Track Mode saves a video of the driving session (as recorded by the front cameras), along with
a .CSV file that provides detailed information about the lap.
NOTE: To stop the timer at the end of your driving session, touch STOP on the Lap Timer popup window.
Monitoring Vehicle Health
You can easily monitor the health of CybertruckModel SModel XModel 3Model Y when using Track Mode by glancing at the
car status area of the touchscreen. The colors indicate the status of the various components, allowing you to determine the
current operating state and make decisions accordingly. The components are displayed in green when operating within their
ideal temperature range. Colors change as follows:
• The Battery displays blue when cold and red when hot.
• A brake displays blue when cold and red when hot (an early warning for overheating brakes).
• A motor displays blue when it's cold or red when it's hot.
• Dynamic readings of the tire pressures displays on the touchscreen. A tire displays blue when under-used or red when the
peak grip is exceeded.
NOTE: A component displayed in red may indicate a need to stop driving and allow the component to cool.
CAUTION: Any vehicle damage or injuries caused by using Track Mode is the driver's responsibility. The vehicle warranty
does not cover damage caused by excessive overuse of vehicle components. It also does not cover racing, autocross, or
driving in competition.
504
Owner's Manual
Owners Manual
G-Meter
In Track Mode, a real-time G-Meter displays on the touchscreen. The G-Meter graphically displays peak lateral, acceleration,
and deceleration values in the form of a circular meter. The history of your drive is represented in the shaded area. The GMeter resets at the start of each driving session.
NOTE: You can swipe the G-Meter card to display a different card. However, the G-Meter displays as the default card
whenever you engage Track Mode.
Track Mode
Track Mode, available only on Performance CybertruckModel SModel XModel 3Model Y vehicles, is designed to modify the
stability control, traction control, regenerative braking, and cooling systems to increase performance and handling while
driving on closed circuit courses. Track Mode improves cornering ability by intelligently using the motors, and regenerative
and traditional braking systems. When enabled, the cooling system runs at an increased level before, during, and after
aggressive driving sessions to allow your vehicle’s systems to withstand the surplus heat.
NOTE: Track Mode is designed and calibrated for a Performance CybertruckModel SModel XModel 3Model Y equipped with
performance brakes and tires. Vehicles without performance brakes and tires may experience comparatively lower
performance and endurance.
WARNING: Track Mode is designed for use on closed circuit driving courses only. It is the driver’s responsibility to drive
safely and ensure others are not endangered.
WARNING: Track Mode is designed for use by experienced track drivers familiar with the course. Do not use on public
roads. It is the driver’s responsibility to be in control of the vehicle at all times, including on the track. Because vehicle
behavior (including traction and stability control) differs when using Track Mode, always use caution.
Using Track Mode
Track Mode is always disabled when you start CybertruckModel SModel XModel 3Model Y. To enable Track Mode for your
current drive, shift into Park and follow these steps:
1. Touch Controls > Dynamics > Track Mode.
When enabled, TRACK displays on the touchscreen above the driving speed, and a Track Mode pop up window appears on
the map. The car status area of the touchscreen displays a color-coded image of your CybertruckModel SModel XModel
3Model Y that provides you with important at-a-glance status information about the Battery, the motors, the tires and the
brakes. See Monitoring Vehicle Health on page 504.
2. If desired, customize the Track Mode settings by touching Track Mode Settings on the Track Mode pop up window (see
Customizing Track Mode on page 503). You can also access the Track Mode settings by touching Controls > Dynamics,
then touching Customize next to the Track Mode setting.
NOTE: For optimum performance, wait for the battery and motor temperatures to reduce if highlighted in yellow or red.
3. If you want to use the Lap Timer, follow the onscreen instructions to drop a pin on the map to define the lap's start/finish
location. You will then need to press START on the Lap Timer to begin your driving session. Once started, the Lap Timer
starts counting when you drive CybertruckModel SModel XModel 3Model Y past the lap's start/finish location where you
dropped the pin. See Using the Lap Timer on page 504.
4. Shift and GO!
If you started the Lap Timer, each time you pass the start/finish location, the timer resets for the next lap. See Using the
Lap Timer on page 504.
You can also view a real-time accelerometer (G-meter) by swiping the Cards area of the touchscreen. See G-Meter on
page 505.
When Track Mode is on:
◦ Autopilot features are unavailable.
◦ The Slip Start setting is overridden.
◦ The Regenerative Braking setting is overridden.
Owner's Manual
505
Owners Manual
◦ Stopping Mode is set to the Roll setting in which CybertruckModel SModel XModel 3Model Y is free-rolling at very low
speeds whenever Drive or Reverse is engaged and both the accelerator and brake pedal are released. For details, see
Stopping Mode on page 466.
◦ Stopping Mode is set to the Roll setting in which CybertruckModel SModel XModel 3Model Y is free-rolling at very low
speeds whenever Drive or Reverse is engaged and both the accelerator and brake pedal are released. For details, see
Stopping Mode on page 467.
◦ Energy usage increases.
◦ Entertainment features are unavailable.
Use the touchscreen setting to turn Track Mode off at any time. Powering off CybertruckModel SModel XModel 3Model Y
also turns off Track Mode (although it may still appear on the touchscreen if Post-Drive cooling is in progress). When Track
Mode is off, all settings return to their previous state and all features return to their normal operating state.
CAUTION: Driver assistance features are automatically disabled when Track Mode is On. It is the driver’s
responsibility to drive safely and be in control of the vehicle at all times. Driver assistance features automatically reenable when Track Mode is turned Off.
Customizing Track Mode
To customize Track Mode, touch Track Mode Settings on the Track Mode popup window that appears on the map when you
enable Track Mode. You can also access the Track Mode settings by touching Controls > Dynamics, then touching Customize
next to the Track Mode setting. Choose an existing Track Mode setting from the list of pre-defined profiles provided by Tesla.
Or create a new settings profile by touching Add New Settings, entering a name for the settings profile, then adjusting these
settings to suit your preferences or driving scenario, or customize for a specific track:
• Handling Balance - Drag the slider to customize the balance of CybertruckModel SModel XModel 3Model Y in a turn. If
CybertruckModel SModel XModel 3Model Y is too loose, you can choose a front-biased under-steering setup. Difficult to
get the vehicle through a turn? Try a rear-biased setup to increase rotation. You can select any value, in 5% increments,
between 100/0 (for 100% front biased used for under-steering) and 0/100 (for 100% rear biased used for over-steering).
• Stability Assist - Drag the slider to choose the level at which the stability control systems assist in controlling the vehicle.
You can choose any level from -10 to +10. Choosing +10 engages all stability assist systems for controllable driving in
which stability systems remain engaged, whereas -10 disables all stability systems and the stability of the drive rests solely
on the driver. The default setting of 0 represents a balance which provides some stability being automatically controlled
and leaving some control up to the driver.
• Stability Assist - Drag the slider to choose the level at which the stability control systems assist in controlling the vehicle.
You can choose any level from -10 to +10. Choosing +10 engages all stability assist systems for controllable driving in
which stability systems remain engaged, whereas -10 disables all stability systems and the stability of the drive rests solely
on the driver. The default setting of 0 represents a balance which provides some stability being automatically controlled
and leaving some control up to the driver.
• Stability Assist - Choose the level at which the stability control systems assist in controlling the vehicle. Stability Assist
modifies motor torque and selectively applies the brakes to each wheel to make the vehicle more stable and help the driver
maintain control.
WARNING: Drive with caution when customizing Stability Assist. If you lose control of
CybertruckModel SModel XModel 3Model Y, less stability control intervention will be applied and the vehicle may
not stabilize itself. Use only if you have advance experience driving beyond grip limits.
◦ Reduced: Provides the maximum amount of stability control intervention while in track mode. Stability control is
reduced compared to on-road mode.
◦ Minimal: Provides minimal amount of stability control intervention.
◦ Off: Oversteer support is completely disabled and traction control is limited to allow wheel spin.
• Regenerative Braking - Drag the slider to choose how much regenerative braking is available. You can choose any value, in
5% increments, between 0 and 100%. Tesla recommends the 100% setting to prevent overheating the brakes.
• Post-Drive Cooling - Enable if you want the cooling systems to continue cooling the vehicle's components even after you
leave the vehicle. Cooling stops automatically when the components are sufficiently cool, or when you power
CybertruckModel SModel XModel 3Model Y off and back on again. Post-Drive Cooling is useful if you want to quickly cool
the components between driving sessions. If Post-Drive Cooling is set to OFF, the components eventually cool, but it takes
longer.
506
Owner's Manual
Owners Manual
• Compressor Overclock - Enable if you want to run the cooling compressor beyond its normal operating rate. Doing so
speeds up the cooling process and is useful when performing multiple aggressive driving sessions with very little time in
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.20_0524.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-05-31
MFR Internal Campaign ID/Software Version: 07/16/1905
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.