PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required to complete this repair.

 Copyright 2024 Ford Motor Company

Ford Motor Company
Ford Customer Service Division
PO Box 1904
Dearborn, Michigan 48121

May 2024
Customer Satisfaction Program 24B27
Mr. John Sample
123 Main Street
Anywhere, USA 12345
Your Vehicle Identification Number (VIN): 12345678901234567
At Ford Motor Company, we are committed not only to building high-quality, dependable products but
also to building a community of happy, satisfied customers. To demonstrate that commitment, we are
providing a no-charge Customer Satisfaction Program for your vehicle with the VIN shown above.
Why are you receiving
this notice?

The Variable Displacement Oil Pump (VDOP) in your vehicle’s engine
currently operates at low pressure/capacity during idle conditions.

What is the effect?

Routine occurrences of prolonged idle time at low pressure/capacity may
result in excess wear to the engine camshaft lobes and valve tappet
surfaces due to reduced lubrication. Over time, the engine may
progressively run rough due to cylinder misfire. Additionally, customers may
hear engine tapping noises and the Check Engine Light (CEL) may
illuminate.

What will Ford and
your dealer do?

In the interest of customer satisfaction, Ford Motor Company has authorized
your dealer to update the PCM software to increase the VDOP
pressure/capacity during idle conditions free of charge (parts and labor)
under the terms of this program.
This Customer Satisfaction Program will be in effect until May 31, 2025,
regardless of mileage. Coverage is automatically transferred to subsequent
owners.

How long will it take?

The time needed for this repair is less than 1 hour. However, due to service
scheduling requirements, your dealer may need your vehicle for a longer
period of time.

What should you do?

Please call your dealer without delay to schedule a service appointment for
Customer Satisfaction Program 24B27. Provide the dealer with your VIN,
which is printed near your name at the beginning of this letter.
If you do not already have a servicing dealer, you can access
ford.com/support for dealer addresses, maps, and driving instructions.

 Copyright 2024 Ford Motor Company

What should you do
(continued)?

Ford Motor Company wants you to have this service action completed on
your vehicle. The vehicle owner is responsible for making arrangements to
have the work completed.
NOTE - You can receive information about Recalls and Customer
Satisfaction Programs through our FordPass App. The app can be
downloaded through the App Store or Google Play. In addition, there are
other features such as reserving parking in certain locations and controlling
certain functions on your vehicle (lock or unlock doors, remote start) if it is
equipped to allow control.

Mobile Service

Ford Mobile Service is offered by participating dealers, contact your dealer
for details.

Pick-Up and Delivery

Complimentary vehicle Pick-Up & Delivery service may also be available
upon request through participating dealers. Your dealer will pick up your
vehicle and return it with the repair completed.

What if you no longer
own this vehicle?

If you no longer own this vehicle and have an address for the current owner,
please forward this letter to the new owner.
You received this notice because our records, which are based primarily on
state registration and title data, indicate that you are the current owner.

Can we assist you
further?

If you have difficulties getting your vehicle repaired promptly and without
charge, please contact your dealership’s Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our
Ford Customer Relationship Center (CRC) at 1-866-436-7332 and one of
our representatives will be happy to assist you. The CRC is open on
weekdays from 8:00 AM – 11:00 PM and on Saturday 8:00 AM - 8:00 PM
(Eastern Time). TTY/TDD users, please contact the CRC at the number
listed using the Telecommunication Relay Service by dialing 711.
If you wish to contact us through the internet, our address is
ford.com/support.
FLEET OWNERS: If you have questions or concerns, please contact our
Ford Pro Contact Center at 1-800-34-FLEET, choose Option #1, and one
of our representatives will be happy to assist you. If you wish to contact us
through the Internet, our address is fleet.ford.com.
Representatives are available Monday through Friday: 7:00 AM – 11:00 PM
and Saturday 7:00 AM – 5:00 PM (Eastern Time).
MOTORHOME OWNERS: If you have questions or concerns, please
contact our Motorhome Customer Assistance Center toll-free at
1-866-906-9811. Representatives are available 24 hours a day.

Thank you for your attention to this important matter.
Ford Customer Service Division

 Copyright 2024 Ford Motor Company

Mobile or Pick-Up and Delivery Repair Record
Page 1 of 1
Customer Satisfaction Program 24B27

Mobile Repair / Vehicle Pick-Up and Delivery Record
VIN ____________________________ received (check one):
☐ Mobile Repair
☐ Pick-up and/or delivery service
As outlined below for the 24B27 Field Service Action program.

☐ Mobile Repair – Date: _______________
OR
☐ Pick-up

– Date: _______________

☐ Delivery

– Date: _______________

Repair Order #

Repair Order Date

Service Manager Signature

Date

Mobile Service Repair Assessment
Page | 1
NEW VEHICLE RECOMMENDED DELIVERY HOLD
Customer Satisfaction Program 24B27
Certain 2023-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or
7.3L Gasoline Engine
Powertrain Control Module Software Update
Mobile Service Repair Assessment
Assessment levels have been identified to help determine the ease of performing eligible mobile
service repairs for a Field Service Action (FSA) outside of the dealership service facility.
Dealer Bulletin
Within the Administrative Information Attachment of the dealer bulletin a mobile service repair
assessment level(s) will be provided. These assessment levels have been determined using the
amount of time, equipment and labor identified to perform the intended service action.
Assessment Levels
- Mobile Reprogramming
- Light Mobile Service
- Enhanced Mobile Service
- Advanced Mobile Service
- Wheel and Tire Mobile Service
- Not a Mobile Service Repair
Description of each level that is used to determine the overall assessment.
– Mobile Reprogramming
• Module Programming or similar type services
• Minimum tools maybe required other than an IDS/FDRS setup
• FDRS programming that requires internet connection (wi-fi or mobile hotspot)
• Make sure vehicle has a charge port to ensure battery voltage is maintained during
flashing of the module(s)
• Repairs not greater than 1 hour in length (including time to wait for programming)
Note: The location will need a charging station or wall box to maintain the 12-volt battery.

•
•
•
•

– Light Mobile Service
Interior repair procedures that do not require seat, dash, or headliner removal
Under hood repairs that do not require large component removal
Exterior repairs that do not require large component/panel removal
Repairs may require standard hand tools (Access to a Technician starter kit or similar)

 Copyright 2024 Ford Motor Company

Mobile Service Repair Assessment
Page | 2
NEW VEHICLE RECOMMENDED DELIVERY HOLD
Customer Satisfaction Program 24B27
Certain 2023-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or
7.3L Gasoline Engine
Powertrain Control Module Software Update
– Enhanced Mobile Service
• A two-person process is required anytime a procedure requires work under the
vehicle
• Brake Inspection and Brake Repair/Replacement
• Limited Suspension Component replacement (no alignment)
• Under Vehicle access for limited repairs (no large component removal)
• Vehicle Check Up - VCU
• Pre-Delivery Inspection - PDI
• Used Car Inspection/Presale Inspection
• May require floor jack, jack stands, and impact tools
Note: Wheel lock may be required.

•
•
•

– Advanced Mobile Service
Fluid Exchange/Oil Change
Light Repairs
Brake Hydraulic Repairs

– Wheel and Tire Mobile Service
• Tire Removal from Wheel
• Tire Balancing
• Tire Repair
Note: Specialized Mobile Service unit and equipment including Tire balancer and Tire
Changer required.
– Not a Mobile Service Repair
• Large component removal
• BEV Battery Replacement
• Requires a vehicle hoist – to complete the repair (more than inspection)
• Required vehicle alignment
• Requires significant vehicle disassembly
• Repairs greater than 2-3 hours
• Any repairs that require M-Time
• Includes a service procedure where the vehicle owner may be distressed about the state
of their vehicle

 Copyright 2024 Ford Motor Company

TECHNICAL INSTRUCTIONS
PAGE 1 OF 2
CUSTOMER SATISFACTION PROGRAM 24B27

CERTAIN 2023-2024 MODEL YEAR SUPER DUTY AND 2021-2025 MODEL YEAR
ECONOLINE VEHICLES EQUIPPED WITH A 6.8L OR 7.3L GASOLINE ENGINE
— POWERTRAIN CONTROL MODULE (PCM) SOFTWARE UPDATE
SERVICE PROCEDURE
IMPORTANT! The Service Technician Specialty Training (STST) Competency 10 certification
requirement, for U.S. market only, will be enforced starting with repair orders

opened on or after April 1, 2024. Field Service Action (FSA) repairs will reject if

the repairing technician is not certified in STST Competency 10 FSA. See

Electronic Field Communication (EFC) 14251 for more details.

Module Programming
NOTE: Program appropriate vehicle modules before performing diagnostics and clear all Diagnostic
Trouble Codes (DTCs) after programming. For DTCs generated after programming, follow normal
diagnostic service procedures.
1. Connect a battery charger to the 12 Volt (V) battery.
• Use of a heavy-duty charger is recommended to maintain proper battery voltage during this
procedure.
NOTE: Verify the negative cable of the charger is installed on a chassis or engine ground and not
the 12V battery negative terminal to prevent the battery saver mode from activating on the
vehicle.
NOTE: If the diagnostic software does not load or if the vehicle cannot be identified properly, make sure
there is a good internet connection and the Vehicle Communication Module (VCM) is properly
connected to the Data Link Connector (DLC).
2. Log into Ford Diagnostic and Repair System (FDRS).
NOTE: Vehicle information is automatically retrieved by the diagnostic software and a Network Test is
run. Vehicle identification data appears on the screen when this is complete.
3. Click Read VIN from Vehicle or manually enter the Vehicle Identification Number (VIN).
NOTE: Available modules are shown on the left hand (LH) side of the screen and available procedures
are listed on the right hand (RH) side of the screen. Modules that are communicating are
highlighted in green.
4. Select Toolbox tab.
5. From the list on the LH side of the screen, select the PCM.
6. From the list on the RH side of the screen, select PCM - Powertrain Control Module (PCM) Software
Update.
7. Click RUN. Follow all on-screen instructions carefully.
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2024

TECHNICAL INSTRUCTIONS
PAGE 2 OF 2
CUSTOMER SATISFACTION PROGRAM 24B27

8. From the list on the RH side of the screen, select Self-Test and click RUN.
9. Click the Run Selected Tests button in the lower right.
10. Click the Clear & Retest button at the top of the screen to clear DTCs in all modules.
11. Disconnect the battery charger from the 12V battery once the programming has completed.
NOTE: Advise the customer this vehicle is equipped with an adaptive transmission shift strategy
which allows the vehicle's computer to learn the transmission's unique parameters and improve
shift quality. When the adaptive strategy is reset, the computer will begin a re-learning process.
This re-learning process may result in firmer than normal upshifts and downshifts for several days.

Important Information for Module Programming

NOTE: When programming a module, use the following basic checks to ensure programming completes
without errors.
• Make sure the 12V battery is fully charged before carrying out the programming steps and connect
FDRS/scan tool to a power source.
NOTE: A good internet connection is necessary to identify the vehicle and to load the diagnostic software.
• Inspect the Vehicle Communication Module II (VCM II)/Vehicle Communication Module III (VCM III) or
the Vehicle Communication and Measurement Module (VCMM) and the cables for any damage. Make
sure scan tool connections are not interrupted during programming.
• A hardwired connection is strongly recommended.
• Turn off all unnecessary accessories (radio, heated/cooled seats, headlamps, interior lamps, HVAC
system, etc.) and close doors.
• Turn the accessories back on after programming has completed.
• Disconnect/depower any aftermarket accessories (remote start, alarm, power inverter, CB radio,etc.).
• Follow all scan tool on-screen instructions carefully.
• Disable FDRS/scan tool sleep mode, screensaver, hibernation modes.
• Create all sessions key on engine off (KOEO). Starting the vehicle before creating a session will cause
errors within the programming inhale process.

Recovering a module when programming has resulted in a blank module
a. Disconnect the VCM II/VCM III or the VCMM from the data link connector (DLC) and your computer.
b. After ten seconds, reconnect the VCMII/VCMIII or the VCMM to the DLC and the PC. Launch FDRS.
The VCMII/VCMIII or the VCMM icon should turn green in the bottom right corner of the screen. If it
does not, troubleshoot the FDRS to VCM connection.
c. If you are using the same FDRS as the initial programming attempt, select the appropriate VIN from
the Vehicle Identification menu. If you are using a different FDRS, select “Read VIN from Vehicle”
and proceed through the Network Test.
d. In the Toolbox menu, navigate to the failed module and Download/Run Programmable Module
Installation (PMI). Follow the on-screen prompts. When asked if the original module is installed,
select “No” and continue through the installation application.
e. Once programming has completed, a screen may list additional steps required to complete the
programming process. Make sure all applicable steps are followed in order.
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2024