6/4/24, 1:42 PM B6.7 MY2024 Oil Pressure Sensor FC435 Calibration Campaign

Campaign Number: c7029 Released Date: 07-May-
2024
Expiration Date (U.S. and

. . . Canada): 07-May-2025

B6.7 MY2024 Oil Pressure Sensor FC435 Calibration ——

Campaign Expiration Date
(International): 07-May-
2025

Attention
¢ U.S. / Canadian Distr./Branches and Div. Offices (Automotive)
If additional information is required, please contact your Cummins Warranty Operations Group
Leader.
Description
This campaign is being issued to address misdiagnostics for Fault Code 435 and may prevent
engine shut down events for certain B6.7 engines that DO NOT carry an Acumen Module. This
document enables certified repair locations to update the ECM calibration on affected units.
Note : This field action provides retroactive coverage for repairs made in anticipation of
and prior to the release of this publication.
Action
In order to qualify for repair under this field action, an engine:

1. will be covered Regardless of coverage status, and

2. must show as OPEN on QuickServe® Online for this field action, and

3. must NOT have an Acumen Module installed.

Note : The ESN list is attached for reference.
After verifying that the engine meets the above requirements, perform the following actions:

1. Use the ECM Calibration Revision History available on QuickServe® Online to confirm the
revision date of the calibration currently installed in the engine. If ECM already contains the
most recent calibration revision, DO NOT recalibrate the engine, no further action is needed.

https://quickserve.cummins.com/qs3/pubsys2/xml/en/campaign/2070/c7029.htm| 414

6/4/24, 1:42 PM B6.7 MY2024 Oil Pressure Sensor FC435 Calibration Campaign
File a claim for appropriate Admin and 17-902 Campaign Check to close the eligibility of the
engine.

2. If a previous calibration revision is installed, download the latest calibration available on
QuickServe® Online. Use the calibration revision history date to identify the latest calibration
revision available. Please refer to Procedure 019-032 in the appropriate Service Manual.

Note : Certified repair locations outside of California, who elect to perform this
campaign on engines installed in vehicles which are registered in the state of
California, are authorized to do so if they have the two items noted below in their
inventory. Please note that the Label, Authorized Change and the Proof of
Correction Form must be ordered through standard parts processes. They

are not available on QuickServe® Online.

3. If applicable, a Label Authorized Change, Cummins part number 5297400, must be filled out
per the attachment. Clearly print or type ECM RECALIBRATION in the center box. Fill in the
Campaign Number, Distributor or Dealer Code, and Date information. Peel off the backing
material and install the label on the engine valve cover near the engine data plate. There is a
clear protective cover on this label; peel the backing off of this cover and push the clear cover
over the printed material. This will help protect the label during engine operation. Label cost
and appropriate SRT time can be claimed per Campaign guidelines.

4. If applicable, a Proof of Correction form, Bulletin # 4310621, must be filled out and provided to
the Customer. Inform the Customer to retain this certificate as proof that the Campaign has
been performed. This form may be required as proof of a Campaign by the State of California,
for vehicles registered in that state, the next time the vehicle registration is renewed. Form
cost and appropriate SRT time can be claimed per the Campaign guidelines.

5. File one claim for the listed parts and required labor associated with this repair. SRT 17-902
should ONLY be claimed if the unit DID NOT require calibration.

Material Disposition
There are no materials involved in the field action.
Reimbursements
Parts
Note : All parts listed are OPTIONAL. Claim only the parts required to complete the
repair. The part numbers 4310621 and 5297400 are only required for use on engines
installed in vehicles registered in the state of California. They are OPTIONAL for all
other applications.
The following parts are covered under this field action:
https://quickserve.cummins.com/qs3/pubsys2/xml/en/campaign/2070/c7029.htm| 214

6/4/24, 1:42 PM B6.7 MY2024 Oil Pressure Sensor FC435 Calibration Campaign
PROOF OF CORRECTION
431062100
one FORM (OPTIONAL)
LABEL, AUTHORIZED
ae 5 airman
Note : SRTs to gain access that are required to complete the repair, that are sufficiently
explained in the claim narrative, may also be claimed on this action.
Note : SRTs are listed as OPTIONAL. Select the appropriate OPTIONAL SRT for the
repair performed. SRT 19-0G5 and the applicable Admin should ONLY be claimed if the
unit DID require calibration. SRT 17-902 and the applicable Admin should ONLY be
claimed if the unit DID NOT require calibration. Where required for registration
purposes, SRT 17-901 can be claimed for the application of the Label Authorized
Change and the completion of the Proof of Correction form.
Labor Using Applicable Access Code and Time
[secede [Description | —‘Time(irs)——«i
Technician Administrative
00-90F Time - Field Action Service
Events (OPTIONAL)
STAMP ENGINE DATA
17-901 PLATE/APPLY EMISSION
STICKER (OPTIONAL)
CAMPAIGN CHECK
17-902
pro (OPTIONAL) P|
ENGINE CONTROL MODULE
CALIBRATION CODE -
19-0G5
TRANSFER (CMI)
(OPTIONAL)
Travel
Travel is not covered under this field action. Towing is not covered under this field action.
Other Claimables
Consumables are not covered under this field action.
Claim Instructions
For Cummins Dealers, claims for this Field Campaign must be filed via RAPIDSERVE™ Web
(rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please reference the
"Warranty" tab in QuickServe® Online. If there are additional questions, please contact your local
Cummins Distributor.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/campaign/2070/c7029.html 3/4

6/4/24, 1:42 PM B6.7 MY2024 Oil Pressure Sensor FC435 Calibration Campaign
Claim Codes
eseription SSC
Pay Code: North America Distributor = X
Pay Code: North America Dealer = D
Pay Code: International Distributor = |
Pay Code: International Dealer = R
Failure Code: WEQPEY
Attachments
Click here to see c7029_esn-list.xlsx
(/service/english/attachments/c7029_esn-list.xlsx)
Engine Family Fuel System
ISBe4 (6 Cylinder) QSB6.7 ISB ISDe, ISD4.5,
ISD6.7 ISBe, ISB4.5, ISB6.7
ISBe4 (6 Cylinder) QSB6.7 ISB ISDe, ISD4.5,
ISD6.7 ISBe, ISB4.5, ISB6.7
ISBe4 (6 Cylinder) QSB6.7 ISB ISDe, ISD4.5,
ISD6.7 ISBe, ISB4.5, ISB6.7
Design Application Market Application
pAstomotveSSSCS~—SSSSCS~S~SCS
Document History
i Document Created; 07-May-2024 |
Last Modified: 07-May-2024
https://quickserve.cummins.com/qs3/pubsys2/xml/en/campaign/2070/c7029.html 4/4