NHTSA ID Number: 11000849
Manufacturer Communication Number: BW8190
TSB/Document Date: 2024-06-04
Summary
Bendix
Fusion Active Safety System with Pedestrian Autonomous Emergency Braking (PAEB). Operators manual.
BENDIX® FUSION™
ACTIVE SAFETY SYSTEM WITH
PEDESTRIAN AUTONOMOUS
EMERGENCY BRAKING (PAEB)
OPERATOR’S MANUAL
This booklet contains important operational and safety information that benefits you and subsequent drivers.
F3.0
THE BENDIX® ESP® STABILITY SYSTEM
All vehicles equipped with the Bendix® Fusion™ system are also equipped with the
Bendix® Electronic Stability Program (ESP®) full-stability system. When necessary,
the Bendix ESP system may automatically reduce the accelerator pedal input and/
or apply the service brakes to help you maintain stability during potential loss-ofcontrol or rollover events.
The Fusion system uses the ESP system to help maintain vehicle stability during
service brake applications. The stability icon will be visible on the dash when the
ESP system activates.
The Bendix ESP stability system and the Fusion system do not replace the need
for you to remain alert, react appropriately and in a timely manner, and use safe
driving practices. Bendix safety technologies complement safe driving practices.
Responsibility for the safe operation of the vehicle remains with you, the driver, at
all times.
Improper use of the Bendix ESP and Bendix Fusion system can result in a
collision causing property damage, serious injuries, or death. Be sure to read,
understand, and follow all these instructions carefully.
Bendix safety technologies complement safe driving practices. No commercial
vehicle safety technology replaces a skilled, alert driver exercising safe driving
techniques and proactive, comprehensive driver training. Responsibility for the
safe operation of the vehicle remains with the driver at all times.
IMPORTANT
Bendix®-brand Electronic Control Units (ECUs) are not designed to store data
for purposes of accident reconstruction, and Bendix® ACom® PRO™ Diagnostic
Software is not intended to retrieve data for purposes of accident reconstruction.
Bendix makes no representations as to the accuracy of data or video retrieved
and interpreted from ECUs for purposes of accident reconstruction. Bendix
does not offer accident reconstruction services or interpretation of stored data.
Bendix ECUs are not protected from fire, loss of power, impact damage, or other
conditions that may be sustained in a crash situation and may cause data to be
unavailable or irretrievable.
F3.0
2
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
System Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Active Cruise with Braking (ACB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Auto-Resume™ after ACB Braking . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ACB Stop and Driver-Go™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ACB Stop and Auto-Go™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Service Brake Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Following Distance Alerts (FDA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Impact Alert (IA) and Autonomous Emergency Braking (AEB) . . . . . . . . . . 17
Pedestrian Autonomous Emergency Braking (PAEB) . . . . . . . . . . . . . 18
Stationary Vehicle Braking (SVB) . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Multi-lane Autonomous Emergency Braking (AEB) . . . . . . . . . . . . . . 20
Lane Departure Warning (LDW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Highway Departure Warning (HDW) . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Highway Departure Braking (HDB) . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Overspeed Alert and Action (OAA) . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
High Beam Assist (HBA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Pedestrian Go/No Go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Brake Overuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
System Responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
What to Expect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Potentially Challenging Situations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
System Maintenance and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 45
Acronyms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
IMPORTANT FEATURE INFORMATION
New Functionalities Added: This version of the Bendix® Fusion™ system includes
three (3) new functionalities: Pedestrian Autonomous Emergency Braking (PAEB),
Pedestrian Go/No Go, and High Beam Assist (HBA). This Operator’s Manual informs
you how these features work. Since this version of the Bendix Fusion system uses
a new camera, differences in traditional features like Autonomous Emergency
Braking (AEB), Lane Departure Warning (LDW), Overspeed Alert and Action (OAA),
and Highway Departure Warning/Braking (HDW/HDB) exist and may or may not be
noticed by the driver.
3
F3.0
INTRODUCTION
This Operator’s Manual provides an
over view of the Bendix® Fusion™
Active Safety System with Pedestrian
Autonomous Emergency Braking (PAEB).
This manual explains the components,
features, functions, and known system
limitations. There are also example
descriptions and explanations of the
audio and visual alerts and system Figure 1 – System Initializing
interventions that can be expected
during operation.
Read this manual thoroughly before operating the system. Be familiar with the
possible system actions, alerts, and its limitations.
Keep this manual in the vehicle as a reference at all times. See Figure 1 for an example
of the messages you may see on the integrated display when the Fusion system is
initializing.
Additional Information about Bendix® Systems
For additional information about Bendix® systems, contact your local
sales representative, visit B2Bendix.com, or call the Bendix Tech Team at
1-800-AIR-BRAKE (1-800-247-2725). Representatives are available to assist you
Monday through Thursday, 8:00 a.m. to 6:00 p.m. and Friday, 8:00 a.m. to 5:00 p.m. ET.
NOTE: All of these alerts and actions are part of the Fusion system’s feature set
released by Bendix. It is possible for this Operator’s Manual to be moved from vehicle
to vehicle. Always verify the features that are included on your vehicle with your
dealer or OEM.
Information about features, operation, and other aspects discussed in this manual
is subject to change and updating, and are posted on the document library located
at B2Bendix.com.
F3.0
4
IMPORTANT SAFETY INFORMATION
As a driver, you are always responsible for the control and safe operation of the
vehicle at all times. The Bendix® Fusion™ system does not replace the need for a
skilled, alert professional driver, reacting appropriately and in a timely manner,
and using safe driving practices.
If you determine that a hazard or unsafe condition exists, you should take all
necessary actions immediately. Never wait for the Fusion system to intervene.
Due to the inherent limitations of image recognition technology, camera-based
safety technology may not be able to detect or may misinterpret lane markings,
vehicles, or other objects and may have limited visibility at night. At these times,
alerts may not occur, or erroneous alerts may occur.
The Fusion system may react ONLY to vehicles that the system determines are
stationary or moving in the same direction as your vehicle. The system DOES
NOT respond to side-to-side moving traffic, or oncoming traffic. The system
will not slow your vehicle or provide an alert as you approach vehicles in these
circumstances. See Figure 2.
Detected forward vehicle
Vehicle equipped with the
Bendix® Fusion™ system
The system does not brake nor warn
for vehicles approaching from
the side or oncoming vehicles
in other lanes
Figure 2 – Oncoming or Side-approaching Vehicles
When the Fusion system needs to intervene, it works in conjunction with the
Bendix® Electronic Stability Program (ESP®) full-stability system to activate the
service brakes. The system should never be relied upon to stop your vehicle or
to avoid a collision. You can, and should, still apply full service braking force, if
needed.
The ESP system is specifically calibrated and validated only for your vehicle’s
original configuration. If the vehicle’s chassis components are altered (for
example, a wheel base extension or reduction; tag axle addition or removal;
a major body change such as conversion of a tractor into a truck; or an axle,
suspension, or steering system component modification), the ESP Electronic
Control Unit (ECU) must be updated to reflect these changes. Contact your OEM
prior to making any modifications to your vehicle.
If you modify your vehicle and do not update the ESP ECU, the ESP system may fail
to function as intended. Serious vehicle braking and performance issues could
result, including unnecessary ESP system interventions, exceeding regulated
stopping distance, and/or system faults leading to loss of system functions. These
types of failures can lead to loss-of-control of the vehicle and/or collisions causing
property damage, serious injuries, or death.
5
F3.0
Potential False Alerts – The Bendix® Fusion™ system may generate a false alert
or false braking. Radar and camera technology has limitations and false alerts or
false braking sometimes occur.
The Fusion system DOES NOT respond to stationary objects. The system will not
slow your vehicle or provide an alert as you approach stationary objects.
Animals, Non-Metallic, or Limited-Metallic Objects – The Fusion system will not
warn or react to animals, or non-metallic objects. The system may not warn or react
to limited-metallic objects (such as recreational vehicles, horse-drawn buggies,
motorcycles, logging trailers, etc.).
The Pedestrian Autonomous Emergency Braking (PAEB) feature can only detect
pedestrians or cyclists in the path of the host vehicle and it is important to note
that pedestrians or cyclists are not instantly detectable, nor are they always
detectable. Objects other than pedestrians or cyclists outside the vehicle’s path
will not trigger a reaction by the system.
The system should never be relied upon to stop your vehicle or to avoid a collision.
You can, and should, still apply full braking force, if needed.
Metallic objects may impair the radar. Objects that are radar-reflective – such
as crash barriers, guard rails, construction zone barricades, and tunnel
entrances – may impair the function of the radar.
Approach grades as you would normally, with the appropriate gear selected and
at a safe speed. Active Cruise with Braking (ACB) SHOULD NOT be used on steep
downhill grades. Follow all safe driving practices.
Inspect the radar and mounting bracket regularly and remove any mud, snow, ice
build-up, debris, or other obstructions that may be blocking the radar. Installing
aftermarket deer, bumper, or grille guards is not recommended and could impair
the operation of the radar.
If the bumper and/or radar are damaged or misaligned – or if the radar was
tampered with – do not use ACB until the vehicle is repaired.
If a problem is detected with the Fusion system, there is an audible alert and/or an
icon on the display. Depending on the type of problem, the system may disable
ACB functions or other safety functionality until service is performed.
Smaller forward vehicles – such as motorcycles and certain types of trailers – may
be difficult for the system to identify. As the driver, it is your responsibility to be
aware of these types of vehicles, to be cautious, and to slow down if necessary.
As the driver, you are always responsible for the safe operation of the vehicle
and you should be aware of potential threats that may enter the vehicle’s lane of
travel. As the driver, you should always be alert and ready to intervene.
Service Brake Hold is not a parking brake. After any Bendix safety system braking
that brings the vehicle to a complete stop, you, the driver, must intervene. As the
driver, you should use caution and manually apply the parking brake as needed.
F3.0
6
SYSTEM COMPONENTS
See Figure 3. The main Bendix® components used in the Bendix® Fusion™ system are
the Bendix® Electronic Stability Program (ESP®) controller; the Bendix® radar; and
the Bendix™ camera.
Bendix® EC-80™ ESP® Controller
Bendix™ FLR-25™ Radar Sensor
SafetyDirect® Processor
Figure 3 – System Components
The Fusion system may detect and monitor moving and stationary vehicles within
its field of view. The radar is located at the front of the vehicle. The camera is located
on the windshield, inside the wiper path.
If the radar or camera becomes misaligned – or any other system problem is detected
– a message (or light) on the display lets you know that service is needed.
SYSTEM DISPLAY
Driver information about the Fusion system is fully integrated into the vehicle display.
See the System Features section of this manual for more detailed information about
the alerts.
Please verify with the vehicle OEM for the actual audible and visual indications your
vehicle may display.
7
F3.0
SYSTEM FEATURES
NOTE: You should check with the vehicle OEM to verify which features are
included on your vehicle.
IMPORTANT FEATURE INFORMATION: DRIVER OVERRIDE
Some driver actions can override Bendix® Fusion™ system activations. Once an Active
Cruise with Braking (ACB) or Autonomous Emergency Braking (AEB) event has started,
you, the driver, can override its activation. Refer to each specific feature section of
this Operator’s Manual for overrides specific to that feature.
NOTE: At all times, you, the driver, are responsible for the control and safe operation
of the vehicle and you should be alert and ready to potentially intervene.
Active Cruise with Braking (ACB)
NOTE: The term ACC (Adaptive Cruise Control) may be used instead of – or
interchanged with – ACB.
When normal cruise control is on and set, the ACB feature also becomes available.
The system may not only intervene to maintain the ACB set speed, but also may
potentially intervene – if needed – to maintain a set following distance behind the
detected forward vehicle in front of you.
NOTE: At all times, you, the driver, are responsible for the control and safe operation
of the vehicle and you should be alert and ready to potentially intervene.
NOTE: You, the driver, can override an ACB system intervention by applying the
accelerator pedal. ACB will be overridden until the accelerator is released; then, ACB
will resume the original set speed and distance control automatically.
When you encounter a detected forward vehicle that slows down below the ACB set
speed, the system has the ability to automatically activate the engine retarder and
apply the service brakes – if needed – in order to maintain the distance between
you and the forward vehicle. The following distance may be adjustable on some
vehicles. See Figure 4.
NOT TO SCALE
Detected
forward
vehicle
The shaded area approximates the field of view of the Fusion system. Detected forward vehicles in
this area may generate an alert or braking by the system.
Figure 4 – ACB Example
F3.0
8
Auto-Resume™ after Active Cruise with Braking (ACB)
If Active Cruise with Braking (ACB) is on and set, the Bendix® Fusion™ system may
automatically apply the service brakes during an ACB braking event in order to
maintain the distance between your truck and the detected forward vehicle. If
your vehicle remains above the minimum ACB set speed as defined by the OEM,
your vehicle may automatically accelerate back up to the ACB set speed while still
attempting to maintain the set following distance with the forward vehicle. If your
vehicle is below the minimum defined ACB set speed, ACB may automatically cancel
and will not attempt to adjust the vehicle speed.
NOTE: Vehicles equipped with ACB Stop and Auto-Go™ do not have a minimum
defined speed and may auto-resume at very low speeds.
NOTE: At all times, you, the driver, are responsible for the control and safe operation
of the vehicle and you should be alert and ready to potentially intervene.
Canceling ACB
NOTE: At any time, you, the driver, can
step on the brake pedal or turn ACB off
via the switch to cancel the ACB feature.
Figure 5 shows an integrated display
message you may see when ACB is Figure 5 – ACB Actively Engaged and
actively engaged and maintaining a set Maintaining Set Following Distance
following distance behind the detected
forward vehicle.
Additionally, Figure 6 shows a message
you may see on the integrated display
when the ACB function cancels, and
the Autonomous Emergency Braking
(AEB) system is monitoring the detected Figure 6 – ACB Canceled, AEB Detecting the
Forward Vehicle
forward vehicle.
If your vehicle speed is below the
OEM-defined minimum speed for AEB operation, the ACB display may be blank.
Alerts and messages will come from the OEM display.
NOTE: At all times, you, the driver, are responsible for the control and safe operation
of the vehicle and you should be alert and ready to potentially intervene.
NOTE: The term CMS (Collision Mitigation System) may be used instead of – or
interchanged with – AEB.
9
F3.0
Active Cruise with Braking (ACB) Stop and Driver-Go™
NOTE: This feature only applies to
vehicles equipped with Active Cruise
with Braking (ACB) Stop and Driver-Go™.
When ACB is on and set, if the detected
forward vehicle slows down to a stop, the
system may automatically de-throttle
Figure 7 – ACB Actively Engaged
the engine, activate the engine retarder,
and apply the service brakes to bring
your vehicle to a full stop. You, the driver,
can resume ACB by pressing down on the
throttle. The vehicle will accelerate back
up to the previous ACB set speed while
maintaining the distance between your
truck and the detected forward vehicle.
Figure 7 shows a message you may see
on the integrated display when the ACB
function is actively engaged.
If you do not press down on the throttle Figure 8 – ACB Canceled - Take Vehicle
Control
within a few seconds, the service brakes
will hold the vehicle at a stop until you,
the driver, intervene.
NOTE: You, the driver, can press the brake pedal, apply the parking brake, or you can
manually accelerate the vehicle by pressing down on the accelerator pedal.
When the vehicle reaches the minimum ACB set speed defined by the OEM, you
can press the resume button to accelerate back up to the previous ACB set speed.
Figure 8 shows a message you may see on the integrated display when the ACB
Stop and Driver-Go function cancels and you, the driver, must intervene. Alerts and
messages will come from the OEM display.
Please verify with the vehicle OEM for the actual audible and visual indications your
vehicle may display.
NOTE: At all times, you, the driver, are responsible for the control and safe operation
of the vehicle and you should be alert and ready to potentially intervene.
F3.0
10
Active Cruise with Braking (ACB) Stop and Auto-Go™
NOTE: Certain vehicles with certain engine/powertrain combinations, may be
equipped with Active Cruise with Braking (ACB) Stop & Auto-Go™ functionality.
Under certain circumstances, after a normal ACB stop, ACB Stop & Auto-Go may
automatically accelerate the vehicle up to the previously set ACB speed without
additional driver input while also attempting to maintain the set following distance
between your vehicle and the detected forward vehicle.
After a normal ACB stop, the service brakes may hold the vehicle at a stop (refer to
the Service Brake Hold section of this document). If the detected forward vehicle moves
forward within a few seconds and a
pedestrian is not detected, your vehicle
may accelerate back up to the previously
set ACB speed while attempting to
maintain the set following distance
between your vehicle and the detected
forward vehicle. See Figure 9.
Figure 9 – ACB Actively Engaged
The Bendix® Fusion™ system may react to
detected pedestrians in the vehicle path
during ACB Stop and Auto-Go. In this
scenario, the Pedestrian Autonomous
Emergency Braking (PAEB) feature may
warn or brake the vehicle. The Fusion
system can only detect pedestrians in
the vehicle’s path and it is important to Figure 10 – PAEB Feature Alert
note that pedestrians are not instantly
detectable.
If, as a result of the Fusion system intervention, the vehicle comes to a full stop, the
service brakes may hold the vehicle at a stop (Service Brake Hold) until you, the
driver, intervene.
NOTE: You, the driver, can intervene by pressing the accelerator pedal or the brake
pedal, pressing the ACB resume button, or applying the parking brake.
Figure 10 shows an example of the message you may see on the integrated display
when the Impact Alert (IA) or PAEB feature is activated.
NOTE: At all times, you, the driver, are responsible for the control and safe operation
of the vehicle and you should be alert and ready to potentially intervene.
11
F3.0
If the detected forward vehicle does not
move forward within a few seconds and
there is not a detected pedestrian, the
driver may see a Paused Cruise Control
message on the dash display. See Figure
11. The service brakes will hold the Figure 11 – Paused Cruise Control
vehicle at a stop until you, the driver,
intervene.
NOTE: You, the driver, can intervene by pressing the accelerator pedal or the brake
pedal, pressing the Active Cruise with Braking (ACB) resume button, or applying the
parking brake.
The ACB feature will automatically re-engage and will accelerate back up to the ACB
set speed. It should be noted that stepping on the brake will cancel ACB and the
ACB resume function.
In addition to a pedestrian being detected, the ACB Stop and Auto-Go™ feature may
also cancel and the brake hold may activate under any of the following circumstances:
•
If the forward vehicle is no longer detected
•
If the turn signal is activated
•
If the hazard lights are activated
•
If the steering system input indicates the vehicle is planning to turn
Passing a Vehicle / Changing Lanes
The accelerator pedal can be applied to pass a vehicle at any time while the ACB
system is active.
When No Forward Vehicle is Present
When ACB is switched on and set and no forward vehicle is within range of the
Bendix® Fusion™ system, the vehicle will use standard cruise control to help maintain
the set speed.
F3.0
12
The Detected Forward Vehicle Icon
When Active Cruise with Braking (ACB)
is switched on and set, and a vehicle
ahead of you is detected by the system,
the detected forward vehicle icon on
the vehicle display will illuminate. See Figure 12 – Detected Forward Vehicle
Figure 12. This is an indication to you that
the Bendix® Fusion™ system detected
the forward vehicle, and the system may
automatically intervene to help maintain the distance.
What is Following Distance?
Following distance refers to the time gap – measured in seconds – between the
vehicle equipped with the Fusion system and the detected vehicle ahead. The
following distance between the two will vary based on the speeds of both vehicles.
This physical distance is sometimes referred to as “headway.”
Automatic Service Brake Applications
The vehicle automatically manages service braking priorities among the various
Bendix® vehicle systems that automatically use the service brakes, such as the Bendix®
Electronic Stability Program (ESP®), Bendix® Automatic Traction Control (ATC), Bendix®
Antilock Braking System (ABS), and the Fusion system.
NOTE: Vehicle stability has priority over all other braking requests.
13
F3.0
When Not to Use Active Cruise with Braking (ACB)
This vehicle’s Active Cruise with Braking (ACB) system must only be used in
the same conditions that are normally recommended for ACB systems that
do not have active, adaptive, or predictive systems. DO NOT USE ACB IN THE
FOLLOWING SITUATIONS:
Inclement Weather/Low Visibility Situations – Do not use ACB in
inclement weather or low visibility conditions – such as rain, snow,
smoke, fog, ice, or other severe weather conditions.
Dense Traffic – Follow all safe driving practices.
City/Local Roads – Follow all safe driving practices.
Sharp Curves and Winding Roads – Do not use ACB when traveling
sharply curved or winding roadways. CAUTION: Road curvature
may impact the radar sensor’s ability to detect forward vehicles in
the same lane.
Entrance or Exit Ramps – Follow all safe driving practices.
Downhill Grades – Follow all safe driving practices.
Construction Zones – Do not use ACB in construction zones.
Off-Road – Do not use ACB in off-road conditions.
F3.0
14
Service Brake Hold
NOTE: The Service Brake Hold function is
only available on vehicles equipped with
ACB Stop and Auto-Go™ and ACB Stop
and Driver-Go™.
If, as a result of the Bendix® Fusion™
system brake intervention, the vehicle
comes to a full stop, the service brakes
may hold the vehicle at a stop until you,
the driver, intervene
Figure 13 – Service Brake Hold
NOTE: The Service Brake Hold can be
canceled if you, the driver, press the
accelerator pedal or the brake pedal, or apply the parking brake. Service Brake Hold
is not a parking brake and you must intervene.
If after a set period of time the driver does not respond, the integrated display may
show a driver intervention request. See Figure 13.
If you choose to exit the vehicle, you are responsible for setting the parking brakes.
NOTE: At all times, you, the driver, are responsible for the control and safe operation
of the vehicle and you should be alert and ready to potentially intervene.
15
F3.0
Following Distance Alerts (FDA)
Following Distance Alerts (FDAs) are
enabled above the minimum speed
threshold and are independent of Active
Cruise with Braking (ACB). FDAs are both
audible and visual indications to you, the
driver, whenever your vehicle is within
the alert range of the detected forward
vehicle.
Once the audible alert is given, you
should increase the distance between
your vehicle and the forward vehicle Figure 14 - FDA
until the audible alert stops.
The FDA is ready to alert you even when
your truck is moving at low speeds. If the
distance continues to decrease, you may
hear and see more rapid alerts. Figure
14 shows messages you may receive on
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: BW8190
Replacement Service Bulletin Number:
MFR Communication Date: 2024-05-24
MFR Internal Campaign ID/Software Version:
Communication Type: Other
NHTSA Components: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.