NHTSA ID Number: 10254003
Manufacturer Communication Number: 15-270-20R
TSB/Document Date: 2024-05-02
Summary
This bulletin provides instruction for use of a new reprogramming procedure to optimize the Denso Gen 4 Audio and Navigation system utilized in the models listed.
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2020 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY:
2020-2022MY Outback & Legacy
2022-2023MY BRZ
2022-2023MY WRX
NUMBER: 15-270-20R
SUBJECT:
FOTA (Firmware Over-The-Air) Reprogramming for DENSO Gen 4
Audio / Navigation Infotainment Systems
DATE: 8/19/2020
REVISED: 04/30/24
INTRODUCTION:
This bulletin provides instruction for use of a new reprogramming procedure to optimize the
Denso Gen 4 Audio and Navigation system utilized in the models listed above. Firmware-overthe-air (FOTA) is a process where remote devices can receive updates to their operating firmware.
This process has become second nature with smartphones, tablets and many other connected
devices. FOTA for automotive infotainment systems was designed with an emphasis on customer
convenience. FOTA updates provide regular enhancements along with software patches as needed
to enhance the customer experience. The convenience factor comes not only with the supply of
regular updates and the enhancements they provide, but through customer control of when these
updates are downloaded and installed. The only requirement is a secure Wi-Fi connection through a
home network or the use of a secure Wi-Fi hotspot to create a connection to the update server. Once
connected, customers can easily obtain and install any available FOTA update to their infotainment
system. FOTA operation is conducted in two steps: download (from the server to the vehicle via
Wi-Fi) and installation (internal to CP1 system in the vehicle). This bulletin will focus on FOTA for
Denso Gen 4 audio systems (MID) and audio-navigation systems (HIGH) which utilize the 11.6-inch
touch-screen display. Models with 7-inch dual screen display (Base) are not FOTA capable.
This bulletin outlines the procedure for performing FOTA updates successfully. These procedures
involve:
•
Assisting customers with FOTA -related concerns if they have been unsuccessful in performing
the FOTA by themselves. (Possible vehicle or system concern.) *
•
Performing the FOTA update for customers who are not comfortable or need assistance with
performing it themselves but have requested the Retailer install it*
•
Updating the firmware using a USB flash drive by following the steps outlined in TSB 15-26120R “Reprogramming File Availability for Optimization of Gen 4 Denso CP1 Infotainment
Systems” when FOTA cannot be performed due to the setup difficulties*.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-270-20R; Revised: 04/30/24
Page 1 of 33
* NOTE: If a customer is simply requesting help with how to perform FOTA, NEVER share a copy
of this bulletin. Instead, provide a copy of the appropriate customer instructions for FOTA available
on Subarunet: Service Operations & Technical > Forms/Downloads page. See Appendix A later in
this bulletin for more information.
It is VERY IMPORTANT to read and understand this information completely before proceeding.
NOTES:
•
REMINDER: FOTA is available for MID and HIGH (Navi) systems with 11.6-inch display only.
•
The currently available FOTA firmware version is not the same version available to Retailers
for USB updating use. However, a system updated using FOTA can be further updated by using
the USB update procedure. For additional details clarifying the scope of FOTA updates, review
the 20MY Legacy/Outback Owner’s Manual Supplement’s additional information for the Center
Information Display. The information is also be downloadable from: https://www.subaru.com/
owners/index.html See Appendix B below for more information.
•
FOTA updates are for the system firmware ONLY. Map updates are a separate function which the
customer may update on their own by using either USB download or Map Over the Air Update
(MOTA). Go to: subaru-maps.com for more information.
Reference photos of each system faceplate are supplied below:
Base
Mid/ High
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The FOTA update process involves downloading and installing the update firmware therefore,
time duration depends on signal strength and transfer rate performance. During installation, the
infotainment system’s functionality will be restricted.
Continued...
Bulletin Number: 15-270-20R; Revised: 04/30/24
Page 2 of 33
Set-Up Instructions and CAUTIONS:
•
Move the vehicle to an outside location where the engine can be safely started and kept idling
during the update process.
•
Never idle the vehicle in a closed space such as a garage, even if the garage door is kept open.
•
Once the vehicle is in a safe location, be sure the vehicle is in Park (CVT) or Neutral (MT) and
the parking brake is fully engaged.
•
Open one or more windows to ensure fresh air is available.
•
Stay with the vehicle until the update is completed.
•
We suggest adjusting the climate controls to your desired settings in case they become
unavailable during the update process.
•
Unplug any devices, chargers, cables or other USB drives from the vehicle’s USB and power
ports.
VERY IMPORTANT: Before proceeding with the updating procedure, the currently installed
version ID MUST be confirmed (Firmware Version Check) by following the steps below:
For vehicles on software versions prior to Ver. RC2202 (i.e., RC2111 or lower ), achieving a final
target version of RC2212 via FOTA may require an additional FOTA software update. Due to
limitations in the RC2212 FOTA’s upgrade path, two consecutive FOTA updates will be prompted.
•
The first FOTA update will bring the vehicle software to a compatible intermediate version
between RC2111/lower and RC2212 (likely RC2202 or RC2208).
•
Upon completion of the first FOTA, the system will automatically prompt for the second
FOTA (Version RC2212) during the next ignition cycle (engine off to on transition ).
Please reference Software Version Table below for additional information.
Please take note: If you are required to perform another FOTA update as outlined above, the
following pop-up will appear if the Second FOTA is Performed after the first step FOTA . For
additional assistance, please see “APPENDIX D” of this TSB.
Continued...
Bulletin Number: 15-270-20R; Revised: 04/30/24
Page 3 of 33
1) After starting the engine and system boot-up completes, from the HOME screen, touch the Settings
button.
2) Press the General button. Use the down arrow to scroll to System Information then press to
display the System Information / Version information.
The examples below identify the head unit model and the last 6 digits 9xxx-xxx) signify the software
version number. Examples:
•
F11GHMxxx-xxx (High model software)
•
F11GMMxxx-xxx (Mid model software)
If on a Legacy and Outback, the software version number
20MY Model
F11GHMxxx-xxx(High model software)
F11GMMxxx-xxx(Mid model software)
21MY Model
F31BHMxxx-xxx(High model software)
F31BMMxxx-xxx(Mid model software)
22MY Model
FB1SHMxxx-xxx(High model software)
FB1SMMxxx-xxx(Mid model software)
WILDERNESS F51XHMxxx-xxx(High model software)
WILDERNESS F51XMMxxx-xxx(Mid model software)
Continued...
Bulletin Number: 15-270-20R; Revised: 04/30/24
Page 4 of 33
Trim/Grade
HIGH/MID
HIGH/MID
HIGH/MID
Outback Wilderness
HIGH/MID
MY
Installed Software Versions
Available Software Version
042-380 (RC2011)
122-370 (RC2202)
142-370 (RC2212)
072-582 (RC2105)
122-570 (RC2202)
142-570 (RC2212)
112-680 (RC2111)
122-670 (RC2202)
142-670 (RC2212)
122-780 (RC2202)
142-770 (RC2212)
132-880 (RC2208)
142-870 (RC2212)
142-980 (RC2212)
153-080 (RC2304)
Not eligible for FOTA
040-980 (RC2011)
120-970 (RC2202)
140-970 (RC2212)
071-182 (RC2105)
121-170 (RC2202)
141-170 (RC2212)
111-280 (RC2111)
121-270 (RC2202)
141-270 (RC2212)
121-380 (RC2202)
141-370 (RC2212)
131-480 (RC2208)
141-470 (RC2212)
141-580 (RC2212)
151-680 (RC2304)
Not eligible for FOTA
060-781 (RC2103)
120-770 (RC2202)
140-770 (RC2212)
070-882 (RC2105)
120-870 (RC2202)
140-870 (RC2212)
110-980 (RC2111)
120-970 (RC2202)
140-970 (RC2212)
121-080 (RC2202)
141-070 (RC2212)
131-180 (RC2208)
141-170 (RC2212)
141-280 (RC2212)
151-380 (RC2304)
Not eligible for FOTA
060-981 (RC2103)
120-970 (RC2202)
140-970 (RC2212)
071-082 (RC2105)
121-070 (RC2202)
141-070 (RC2212)
111-180 (RC2111)
121-170 (RC2202)
141-170 (RC2212)
121-280 (RC2202)
141-270 (RC2212)
131-380 (RC2208)
141-370 (RC2212)
141-480 (RC2212)
151-580 (RC2304)
Not eligible for FOTA
2020
2021
2022
2023
If on a WRX, the software version number:
2022-2023MY Model
F21SHMxxx-xxx(High model software)
F21SMMxxx-xxx(Mid model software)
Continued...
Bulletin Number: 15-270-20R; Revised: 04/30/24
Page 5 of 33
Trim/Grade
HIGH
MID
MY
Installed Software Versions
Available Software Version
101-770 (RC2202)
141-770 (RC2212)
121-980 (RC2202)
141-970 (RC2212)
132-080 RC2208)
142-070 (RC2212)
142-180 (RC2212)
Not eligible for FOTA
101-770 (RC2202)
141-770 (RC2212)
121-980 (RC2202)
141-970 (RC2212)
132-080 RC2208)
142-070 (RC2212)
142-180 (RC2212)
Not eligible for FOTA
Installed Software Versions
Available Software Version
121-770 (RC2202)
141-770 (RC2212)
2022-2023
2022-2023
If on a BRZ, the software version numbers:
22MY Model
F41CMMxxx-xxx(Mid model software)
23MY Model
FG1CMMxxx-xxx(Mid model software)
Trim/Grade
MY
122-080 (RC2202)
MID
MID
2022
2023
121-870 (RC2202)
141-870 (RC2212)
132-180 (RC2208)
142-170 (RC2212)
142-280 (RC2212)
Not eligible for FOTA
120-580 (RC2202)
140-570 (RC2212)
130-680 (RC2208)
140-670 (RC2212)
140-780 (RC2212)
Not eligible for FOTA
If the software version number matches “Older Software Versions” proceed to STEP 2 below. If the
software version is “Latest Software Version” as the unit already has the latest software version
installed. Proceed to the WARRANTY / CLAIM INFORMATION section of the TSB and process a
claim for Version Check Only.
FOTA REPROGRAMMING PROCEDURE
Step 1- Connect the vehicle Subaru to an active, secure Wi-Fi connection:
•
You can use one of two Wi-Fi sources:
1. The retailer’s secure Wi-Fi (if it reaches the vehicle)
2. A cellphone’s Wi-Fi hotspot (if the phone and data plan are capable).
NOTE: This update uses at least 100MB of data so, choose a Wi-Fi connection with no data
restrictions. Wi-Fi connections requiring acceptance or login to a web page (such as a coffee shop or
hotel) cannot be used.
Continued...
Bulletin Number: 15-270-20R; Revised: 04/30/24
Page 6 of 33
•
To connect to the preferred Wi-Fi source, follow these steps:
1. Go to Settings on vehicle display screen.
2. Select General.
3. Select Wi-Fi.
4. Ensure Wi-Fi is turned on and then select Available Wi-Fi Networks.
5. Select the Wi-Fi network of choice (and enter the password if required).
Continued...
Bulletin Number: 15-270-20R; Revised: 04/30/24
Page 7 of 33
NOTE: Take note of the Wi-Fi signal strength in the top right corner of the screen. If only 1-2 bars
are displayed with the selected network, download speeds will likely be slow. Choose a stronger
network if possible or move the vehicle closer to the Wi-Fi source.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-270-20R
Replacement Service Bulletin Number:
MFR Communication Date: 2024-04-30
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.