NHTSA ID Number: 10252029
Manufacturer Communication Number: B610624
TSB/Document Date: 2024-04-01
Summary
This Informational Bulletin is intended as a guided work-through process to address customer charging complaints. The step-by-step guide will help walk you through the “basic†procedure to test the charger/infrastructure when the vehicle does not charge, either at a: Home charger AC Level 1/Level 2 - Flexible Fast Charger/hard wired Wallbox, or a Public AC Level 2, or DC Level 3 - Fast Charging Station Note: All PHEV and BEV vehicles may be affected.
3/18/24, 11:02 AM
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
SIB 61 06 24
BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/
INFRASTRUCTURE
☒
2024-03-15
THIS REPAIR IS MOBILE FRIENDLY
MODEL
E-Series
G05
G09
G26
G60
G70
G70
i20
Model Description
X5 Sports Activity Vehicle (PHEV)
BMW XM Sports Activity Vehicle (PHEV)
i4 Gran Coupe (BEV)
i5 Sedan (BEV)
i7 Sedan (BEV)
750e xDrive Sedan (PHEV)
iX Sports Activity Vehicle (SAV)
SITUATION
This Informational Bulletin is intended as a guided work-through process to address customer charging
complaints.
The step-by-step guide will help walk you through the “basic” procedure to test the charger/infrastructure
when the vehicle does not charge, either at a:
Home charger AC Level 1/Level 2 - Flexible Fast Charger/hard wired Wallbox, or a
Public AC Level 2, or DC Level 3 - Fast Charging Station
Note: All PHEV and BEV vehicles may be affected.
CAUSE
Charging infrastructure, non-vehicle related charging complaints.
Possible infrastructure related charging errors:
Interruption or failure of the power grid (no voltage at the high-voltage connection)
Voltage fluctuations from the power supplier (low supply voltage will affect the charging rate)
Output reductions imposed by the power supply company.
Charger plugged incorrectly into the power outlet, (charger plug fault)
Charging device fault (Level 1, Level 2/ Wallbox or charging station)
Wrong amperage limit set in the vehicle
Power reduction or limitation imposed by the vehicle or public charger.
Charging electronics fault in the vehicle
High voltage charging socket fault
Note: To protect Level 1 (120 V) the Flexible Fast Charger (FFC), the device has temperature sensors
(in the power supply plug and in the control box). If the temperature exceeds a specified value, the
power output will be temporarily switched off.
See SI B61 29 23 Differences Between Flexible Fast Charger Versions 1.0 vs 2.0, for more
information.
Copyright ©2024 BMW of North America, Inc.
about:blank
1/8
3/18/24, 11:02 AM
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
SOLUTION
Due to significant enhancements to the charging functions in BMW vehicles and to offer premium service in
the event of a customer charging complaint, it is essential to identify when the charging errors are caused by
the charging infrastructure and not the vehicle.
Therefore, to rule out the vehicle as the source of the charging complaint a catalogue of questions and
checks has been developed to aid in the diagnosis.
The first step in processing a charging complaint case is for the Service Advisor to have the customer fill out
the “Customer Charging Complaint Questionnaire” found in SI B61 07 24.
For more information regarding how to work through charging complaints see:
SI B61 07 24 Customer Charging Complaint Work Through Procedure and its attachments
The specific questions below (from the “Customer Charging Complaint Questionnaire”) must first be
clarified in a customer dialogue, this may effectively help rule out the vehicle as the source of the charging
complaint.
General questions about the charging process:
Did the charging process take place at a public charging station or at a home charger?
Is it a one-time charging error or a recurring issue?
Did the charging process not start at all or was it aborted?
Were Check Control messages displayed in the vehicle? If so, which one(s)?
Questions about charging at home:
Which charger did the customer use?
What charging current limitation has been set in the customer vehicle settings?
Has the customer tried charging at a different power supply outlet?
Has the customer tried using a different AC charger or adapter?
Has the customer tried using both AC 120V Level 1 and AC 240V Level 2?
Questions about public charging:
Was the vehicle charged at a Level 3 DC charging station or at a Level 2 AC charging station?
Were there any problems logging in (authenticating) for charging?
Is the customer's charging card activated for that charging station?
Has the customer tried charging at a different public charging station?
Once ISTA diagnostic checks on the vehicle at the dealer service center have verified that the charging
functions are operating as designed and (if possible) the customer’s charger has been tested, it has become
clear that there may be an error in the charger/infrastructure which the customer is using.
Before proceeding to test the charger/infrastructure, always remember to check the following
vehicle settings that may affect charging:
Check the maximum charge current in the vehicle charging settings for “charge limit” (reduce if the
setting is overpowering the installation)
Make sure that the charging setting “Charge immediately” has been set
Verify that the departure time set in the vehicle does not interfere or conflict with the charging time
window set in the vehicle or app
Copyright ©2024 BMW of North America, Inc.
about:blank
2/8
3/18/24, 11:02 AM
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
Make sure the “Charging time slot” setting does not interfere or conflict with the “Departure time”
set in the vehicle
Try disabling all charging precondition settings or try charging at a different time of day to rule out
conflicts
PROCEDURE
Note: Many of the items outlined below may not be able to be verified by the customer. It may
become necessary for the BMW center to deploy a BMW technician or a Mobile Service Technician
(if available) to visit the customer's house or location to inspect and test their home charger and
infrastructure for the related items below.
Once the vehicle charging system has been verified and it is determined that the vehicle is working
as designed at the dealer service center, but the vehicle does not charge at the customer’s locationIt is then suspected that the charger or infrastructure which the customer is using may be at fault.
Please review the following list of probable causes:
Home charger/infrastructure related checks:
The BMW Occasional Use Charger (OUC)/Flexible Fast Charger may need to be reset in
accordance with the charging cable instruction manual
Check for dirt and damage to the charging plug and to the high voltage charging socket on the
vehicle
Make sure that the charger plug is correctly plugged into the vehicle (all the way until the click)
If possible, try to use a different charger (Level 1/Level 2)
If using the Flexible Fast Charger, try using a different adapter
Repeat charging attempt after 15 minutes of downtime
Try charging at another power outlet (as charging requires a dedicated power outlet)
Disconnect electrical devices from the charging power outlet circuit (adjacent outlets)
To test the power outlet, simply connect another device (i.e., cell phone charger or lamp)
Check the main circuit breakers for the power outlet used for charging
Check for circuit protective devices (i.e., GFI outlets or GFCI- ground fault circuit interrupter), make
sure they are not tripped
Do not use extension cords for charging!
If all the above checks are verified, it may be necessary to have the home charger electrical
installation checked by a qualified electrician (wiring, fuses, main breaker, and power outlet)
Public charging station relevant checks:
Is the charging complaint regarding a specific public charging station or several?
Is the customer's charging (RFID) card activated for the charging station?
Use an alternative charging card, charging app or authentication method (i.e., Click & Charge, Plug
& Charge)
Try charging at another charging station
Make sure that the charging settings in the vehicle do not cause charging conflicts
Always check for debris or damage to the charging plug, or to the vehicle charging socket
Make sure that the charging plug is correctly plugged into the vehicle (until the click is heard)
Identify if the problem is only on DC charging
Perform a charging test at a BMW charging station (See tips and tricks below)
If the customer complains that the high-voltage battery
is not charged to 100%, make sure that no
charging target of less than or equal to 80% has been set in the vehicle
If there was NO problem found once the infrastructure related questions and checks suggested above have
been done, and the vehicle still does not charge on-site; the vehicle charging system must be further
Copyright ©2024 BMW of North America, Inc.
about:blank
3/8
3/18/24, 11:02 AM
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
diagnosed with ISTA to correct the problem.
Note: Mobile Service Technicians can run vehicle tests, charging test plans, etc on-site, while
connected to the customer’s hard-wired Wallbox charger or Flexible Fast Charger. This intends to
rule out the vehicle as the source of the charging complaint.
Tips and tricks for testing Level 3 DC Fast Charging complaints.
To verify that a vehicle charges on Level 3 DC charging as designed, try charging at a BMW Level 3 - DC
fast charging station at the BMW center.
In absence of a level 3 - DC fast charger on premises, it is suggested that a shop “testing” account may be
acquired for this purpose.
Most “free” Level 3 DC Fast Charging stations are not subject to certificate authentications to initialize the
charging process; therefore, they cannot be used to diagnose an account information or certificate/app
authentication suspected issue.
To diagnose an account information or certificate/app authentication suspected issue, it is necessary that the
customer verifies his/her own account information by swiping into the suspected charging station to test the
sign in/certificate/app authentication.
For more information regarding DC charging review:
SI B61 25 23 BEV Reasons For No/Slow DC Charging Complaint.
For more information regarding AC and DC charging functionality in BMW vehicles review:
SI B61 07 24 Attachment 4 GEN 5 BEV Quick Reference Guide_v2.pdf
For more information regarding how to work through charging complaints, see:
SI B61 07 24 Customer Charging Complaint Work Through Procedure and its attachments
Helpful Hyperlinks to charging related SIBs below.
SI B61 07 24 Customer Charging Complaint Work Through Procedure
SI B61 29 23 Differences Between Flexible Fast Charger Versions 1.0 vs 2.0. pdf
SI B61 25 23 BEV Reasons for No/Slow DC Charging Complaint
CLAIM INFORMATION
1. BEV/PHEV’s Charging Infrastructure-Related Charging Error/Fault (Non-Vehicle Related Issue)
The procedure to identify and document a BEV/PHEV’s infrastructure-related charging error/fault is covered
under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Repair
Code:
6144900200
Fx Gx Ix PHEV BEV service instruction reference
customer charging problems (charging infrastructure)
(Non-vehicle related)
Below are the special flat rate labor operation code choices for this action.
Work Pkg
#1
Or:
about:blank
Labor
Operation
Description (Plusposition work)
Labor Allowance
00 75 836
Vehicle test (including 12 V battery
support) in the event of problems with the
charging infrastructure (includes 00 00
556/61 21 528) (Plusposition work Vehicle is already in the workshop)
As applicable
Copyright ©2024 BMW of North America, Inc.
4/8
3/18/24, 11:02 AM
#2
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
00 75 255
Vehicle test (including 12 V battery support) in
the event of problems with the charging
infrastructure (includes 00 00 006/61 21
528) (Main work)
As applicable
Only one of the flat rate labor operation codes listed above can be used for claim submission and reimbursement. Also, only
one Main work flat rate labor operation code can be claimed per workshop visit.
If you are using a Main labor code for another repair, use the Plus code labor operation 00 75 836 instead of 00 75 255, or
“exclude a Vehicle Test” when it is included in another repair.
Claim Repair Comments (Situation 1)
Reference the SIB number, the work package (Pkg) number performed and which one of the above issues
applies in the technician’s RO notes and in the claim comments (For example: B61 06 24 WP 1), unless
otherwise required by State law.
More importantly, please also provide any additional pertinent information that would be helpful in describing
what caused the BEV/PHEV charging issue/situation that was not due to the vehicle itself.
Or:
2. BEV/PHEV’s Charging Error/Fault caused by a Vehicle Component and/or Assembly
Fault/Malfunction, Eligible and Covered Work/Repairs (Vehicle-related Issue)
If a BEV/PHEV charging issue, condition, fault and/or malfunction described above is caused by a
verified defect in materials and/or workmanship with a vehicle component and/or assembly (confirmed
through ISTA and other approved diagnosis procedures), the qualifying corresponding repair is covered
under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Damage and/or BEV/PHEV charging issues caused by outside influences, including Infrastructure issues,
are not covered under the BMW limited warranties.
Please do not use Repair Code 61 44 90 02 00 for the covered repair-claim submissions.
To submit a claim, please following the established and applicable warranty policy and procedures
(Labor/Part/Sublet) that apply to the repair being performed.
Refer to AIR to obtain and assign the RO line item the applicable Repair Code
Obtain the flat rate labor operation codes (*including the diagnosis) that applies and their corresponding flat rate unit (FRU)
allowances.
Only one Main labor operation code can be claimed per repair visit.
Claim Repair Comments (Situation 2)
Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the applicable
procedure for documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis
work time (WT), job/repair work time (WT), and the vehicle repairs your center performed, unless otherwise
required by State law.
BMW Group’s AIR Application Resource for Flat Rate Labor Operation Codes
To obtain the corresponding flat rate unit (FRU) allowance information from the BMW Group AIR application
resource, start by entering the Chassis Number (the last seven (7) characters of the VIN, select the
applicable Model if two or more vehicle choices show), or enter the full VIN (17 characters), click on the
“Search” button. Next, click on the “Flat Rate Units” button and enter the flat rate labor operation code in the
field to the right, click “Search” to
display the
Flat Rate
GroupAmerica,
detail choices.
Copyright
©2024
BMWUnit
of North
Inc.
about:blank
5/8
3/18/24, 11:02 AM
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
Servicemobile - Off Site Service visit to address a BMW BEV/PHEV Charger Cable Plug Connector that
will not Release from the Charging Socket (00 75 836 or 00 75 255)
For BMW centers that qualify, the repair to address this issue is eligible to be performed and submitted as a mobile service
Off-Site Repair which provides an.
Qualifying BMW centers are those that are currently active and participating in the BMW Servicemobile program. Other BMW
centers that may qualify are those have officially registered their interest in conducting mobile service work under the BMW
Roadside Assistance Program.
If you have not already enrolled and/or want additional information, please send an email with your contact information
to [email protected].
Claim - Labor Reimbursement (Standard 150 Percent Rate Applies)
When a repair is performed under this program to address this situation on a BMW vehicle at a customer’s
off-site location, qualifying BMW centers will be reimbursed for the corresponding labor operation code’s
published flat rate unit (FRU) allowance in the BMW Group AIR’s application at a rate of 150 percent.
This mobile service repair work is subject to the same policy and procedures that apply to the warranty
repair work being performed in your workshop.
Time Control and Documentation
While repair-specific punch times are not necessary for this off-site assistance work being performed, the mobile service
technician must still punch on the corresponding repair order (electronic or manual) prior to leaving your BMW center when
he or she is dispatched, and they must punch off the repair order upon their return to your center.
In cases where the technician is out on the road for an extended period (for example, handling multiple calls), only one on/off
punch time is required.
RO Invoicing for Claim Submission - SI B61 06 24 with Off-Site Service Call Repair
A. i7 xDrive60 Sedan Example - Line Item for WP # 1 or WP # 2.
6144900200
Fx Gx Ix PHEV BEV service instruction reference
customer charging problems (charging infrastructure)
(non-vehicle related)
Work Pkg
Labor
Operation
Description
Labor Allowance
#1
00 75 836 Pluspostion
Vehicle test (including 12 V battery
support) in the event of problems with the
charging infrastructure (includes 00 00
556/61 21 528)
3 FRU
00 75 255* - Main
work
Vehicle test (including 12 V battery
support) in the event of problems with the
charging infrastructure (includes 00 00
006/61 21 528)
5 FRU
Repair Code:
And:
Or:
#2
Then:
B. Open an additional RO line item in conjunction with the WP number above that applies.
Repair Code:
85800306SM
BMW Servicemobile RSA
Copyright ©2024 BMW of North America, Inc.
about:blank
6/8
3/18/24, 11:02 AM
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
As applicable:
Labor
Operation
61 25 000
Type
Description
Labor Allowance
Pluspostion
3 FRU (00 75 836) plus 50 percent
equals 4.5 FRU total, claim additional
2 FRU after roundup (A together with
B: 5 FRU total)
2 FRU
Main work*
5 FRU (00 75 255) plus 50 percent
equals 5.5 FRU total, claim additional
3 FRU after roundup (A together with
B: 8 FRU total)
3 FRU
Or:
61 25 000
Claim Repair Comment
SI B61 06 24: Additional labor for Off-Site Service Repair to address a BMW BEV/PHEV charger cable plug connector that
will not release.
(*) If the technician handled multiple off site service calls during the same service dispatch/run where two or more repairs are
eligible to have the additional labor allowance claimed, then only one (1) of the service calls qualifies to be “based” on a Main
work flat rate labor operation code’s FRU allowance.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback
To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an
IDS ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Copyright ©2024 BMW of North America, Inc.
about:blank
7/8
3/18/24, 11:02 AM
61 06 24_BEV/PHEV CHARGING COMPLAINT RELATED TO CHARGER/ INFRASTRUCTURE
Copyright ©2024 BMW of North America, Inc.
about:blank
8/8
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B610624
Replacement Service Bulletin Number:
MFR Communication Date: 2024-03-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.