NHTSA ID Number: 10251784
Manufacturer Communication Number: S2008000154
TSB/Document Date: 2024-03-18
Summary
B1053-64 RFHM (Kin Communication) - Signal Plausibility Failure Set In The RF Hub. Unable To Shut Off Ignition, EVIC Displays Service Passive Entry
STAR ONLINE PUBLICATION
Case Number: S2008000154 Rev. F
Release Date:
January 2024
Symptom/Vehicle Issue: B1053-64 RFHM (Kin Communication) - Signal Plausibility
Failure Set In The RF Hub. Unable To Shut Off Ignition, EVIC Displays Service
Passive Entry
Discussion: The customer may state the vehicle cannot be shut off and the message
“Service Passive Entry Vehicle Will Not Shut Off Or Restart” is being displayed in the
EVIC. The customer may also indicate the Passive Entry System does not function.
Upon scanning the vehicle for DTC’s you will find B1053-64 RFHM (Kin
Communication) - Signal Plausibility Failure set in the RF Hub.
Repair: Engineering has made software updates available for the Radio Frequency
HUB (RFH), update the software to most current software level to resolve this
complaint. Replacement of the RFH or any other components will not resolve this
exact issue.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does
not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be
similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA
US LLC
Version 4.2 02/06/2017
STAR ONLINE PUBLICATION
If needed:
As an interim resolution for the vehicle not shutting off, perform the
procedure outlined below to shut off the ignition.
Note: Ensure the vehicle is parked in a safe location which is accessible by a tow
vehicle. The vehicle WILL NOT RESTART after performing this procedure unless the
fault is cleared or the battery is disconnected
Step 1: Using the EVIC Controls, enter to the “Settings” Menu
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does
not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be
similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA US LLC
Version 4.2 02/06/2017
STAR ONLINE PUBLICATION
Step 2: Navigate and select “Saftey&Assist Vehicle Shut Off”
Step 3: The warning message that the vehicle will not restart is displayed. Press
and HOLD the EVIC OK button. A timer bar will appear.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does
not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be
similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA US LLC
Version 4.2 02/06/2017
STAR ONLINE PUBLICATION
Step 4: Once the timer has completed and the “Press Brake” message is
displayed. You must release the OK button.
Step 5. First, press and hold the brake pedal AND THEN press and hold the OK
button. The Press Brake timer will start.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does
not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be
similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA US LLC
Version 4.2 02/06/2017
STAR ONLINE PUBLICATION
Once the Brake Timer completes, the ignition will shut off.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does
not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be
similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA US LLC
Version 4.2 02/06/2017
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: S2008000154
Replacement Service Bulletin Number:
MFR Communication Date: 2024-01-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM
✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages - 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
- 🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
- 🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc
- Dealer-Level Diagnostics, Faster & Easier: The heavy duty truck scanner delivers full-system diagnostics for engine, ABS, transmission, and more, plus 7+ reset functions like DPF Regen and Speed Limit Adjust. Powered by a 1.3G CPU, 2GB RAM, 16GB storage, Android 8.1, and a 3000mAh battery, it runs smoothly for fast scanning, live data, reports, Auto VIN, Wi-Fi updates, and easy handheld use. It captures screenshots, replays live data, and generates reports to support your repair decisions.
- Diesel Truck DPF Regen & Reset Features: Experiencing loss of power, sluggish acceleration, or poor hill-climbing performance? These symptoms are often caused by a clogged or overloaded DPF. The truck diagnostic scanner offers OEM-level forced DPF regeneration, DPF reset, and DPD/DPR functions. This device extends DPF lifespan and efficiently diagnoses exhaust aftertreatment issues. It can significantly reduce diagnostic time and save you up to $3,000 or more in costly dealership fees.
- 7+ Resets - Perform Essential Procedures: The truck scanner features 7+ essential resets including DPF Regen clears carbon buildup; Oil Reset clears service light; Injector Coding matches new injectors; DEF Test checks urea injection; Speed Limit Adjust saves fuel; Cylinder Cutout pinpoints misfires; Clutch Relearn restores smooth engagement. Reset after maintenance or part replacement for proper truck operation. Vehicle compatibility varies. Email [email protected] to confirm before buying.
- One Tool for 50+ Truck Brands: The diesel scanner supports J1939, J1708, J1587, and OBD2/CAN protocols, delivering broad coverage for major diesel trucks and commercial vehicles including Cummins, Cat, Detroit, Paccar, Volvo, Freightliner, Kenworth, Peterbilt, International, Mack, Isuzu, Hino, Scania, Mercedes-Benz, and more. Also supports Allison, Aisin, Eaton, WABCO, and Bendix, helping you diagnose more vehicles, reduce equipment costs, and handle more jobs with one professional scan tool.
- Full System Diagnostic for Truck: The truck scanner diagnostic tool covers all systems like engine, ABS, transmission, SAS, SRS, TPMS and more. It reads fault codes and shows real-time data. Additionally, it includes full HD OBD and OBD2 modes: read/clear codes, live data stream, I/M readiness, freeze frame, DTC lookup, and more. When warning lights appear or performance issues arise, quickly identify which system is affected and gain the real-time data needed for accurate diagnosis.
- Diagnose Heavy-Duty Truck Problems Fast — Read and clear fault codes and diagnose warning light issues on many Class 4–8 diesel trucks including Freightliner, Peterbilt, Kenworth, Volvo, Mack and Cummins-powered vehicles
- Help Reduce Downtime & Repair Costs — It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required — Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup — View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support — Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.