Loading...

NHTSA ID Number: 10251783

Manufacturer Communication Number: S1408000384

TSB/Document Date: 2024-03-18


Summary

Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On


Case Number: S1408000384 Rev. D
Release Date:

January 2024

Symptom/Vehicle Issue: Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery
Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related
Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Discussion: The IBS measures voltage, current and temperature. From these core
measurements, it estimates other characteristics of the battery such as SOC and battery internal
resistance.
This document provides added information about the IBS to avoid incorrect and unnecessary
IBS replacement. For most IBS returns, the IBS engineering team and supplier find no issue with the
returned parts. Please ensure claim narratives list and reference any DTCs mentioned in this
document and state the DTCs set at time of IBS replacement. A replacement IBS is not required on a
vehicle without DTCs.
Note: In most cases, the IBS can self-recover from a functional software defect if the two-way
connection gets cycled (i.e., resets/reboot the module). The IBS will then function normal
again, however; it will need a quiescent (vehicle completely sleep) period of ~2 to 4 hours to
calibrate SOC to the connected battery.

Battery Exchange
IBS DOES NOT NEED TO BE REPLACED WITH NEW OR RECHARGED BATTERIES. However, it
might require SOC adaptation.

IBS SOC Adaptation (Learning)
Learning needs 1 crank and 2-4 hours of quiescent/sleep time.
Quiescent/Sleep time is defined as Quiescent phase: [-500mA, 50mA] battery current.
If unsure of quiescent state current, disconnect the vehicle ground cable (example below: Vehicle
battery ground/charge point) from the IBS to guarantee no current flows through the battery during
this period. IBS 2-way connection and clamp connection to battery negative post should remain
connected for the IBS to operate. After completion of quiescent state, re-connect the ground back to
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

the IBS. In normal operation, all current flowing through the battery needs to pass through the IBS for
proper reading.

IBS Functional Internal Monitoring
IBS software monitors itself for defective behavior which can trigger DTC B2193 on the Body Control
Module (BCM) end. This defect occurs on rare occasions.
DTC U113E is a related DTC set by the BCM in the event of Local Interconnect Network (LIN)
communication not responsive. Using, the IBS power reboot (reset) can sometimes help clear these
faults.
IBS Related DTCs (set by BCM):
➢ B2193: Intelligent Battery Sensor Internal
➢ U113E: Lost communication with intelligent battery

DTC B2193
If you observe an active DTC B2193, reset the IBS by cycling the 2-way connection. Then start the
vehicle and wait for about 30 seconds to determine if the DTC clears or it changes to a stored DTC. If
you find it no longer exhibits an active fault, then it is appropriate to keep the same IBS. Else if an
active DTC B2193 remains, replace the IBS.

DTC U113E and LIN Diagnostics
If you observe an active DTC U113E set by the BCM, it means a defect exists in the LIN bus.
BCM monitors IBS data when IGN ON.
This defect can occur due to a wiring defect in the LIN bus created by short/open LIN bus circuit, or
IBS fuse. Moreover, it can relate to an internal IBS or BCM defect in hardware or software under rare
circumstances.

U113E DTC Root Cause Inspection:
1. Read vehicle DTCs while the IGN ON.
2. Wiggle the IBS 2-way harness takeout (LIN and IBS feed takeout) and monitor the state of
DTC U113E.
o If this step affects U113E behavior, the issue is likely related to a failure in the harness.
3. Verify power to IBS by back probing the IBS 2-way connector (pin 2, “RD” wire).
o If voltage is lower than 11.8V, follow normal procedures for low batteries.
4. Verify IBS feed fuse state. Replace the fuse if needed.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

5. Verify LIN bus activity with MopareBay logo scope.
o Config scope to LIN monitor if feasible.
o Replace the IBS only based confirmation from the LIN diagnostic.

DTC P00FD
This DTC relates to ECM diagnostic of the Aux battery. If ECM detects a voltage delta above allowed
limit between Aux and Main battery, this DTC get set. Please also note that ECM latches ON to this
fault even after the delta voltage returns to an acceptable level unless cleared with a service tool.
P00FD is not related to the IBS. Never replace IBS for P00FD.

Proper Battery Charging
In-Vehicle systems is not an issue. Please note to charge through the IBS or tie negative clamp to
Body/engine ground. Customers, Dealers, Mechanics, and Engineers usually want to place the
negative clamp on the pole of the battery. This creates Blind charging. “DO NOT BLIND CHARGE”
See below proper connections for charging.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

➢ IBS SOC adaptation is needed after charging the batteries.
➢ Note IBS will self-adapt in the next available quiescent state.
➢ A common misdiagnosis is Battery light illuminated. The IBS has NOTHING to do with this
light. The battery Light is indicative of a “CHARGING SYSTEM and condition of the battery

START/STOP INOP
ESS INOP can occur due to many factors not related to the IBS functionality. Moreover, ESS can get
inhibited if battery SOC (state of charge) falls below the allowed SOC level. The SOC level varies
depending on temperature since temperature affects the battery performance. The SOC state is
monitored by the PCM and BCM. Battery temperature and SOC (State of charge are critical) see
chart for start stop engine on conditions.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

Example Display on a start stop vehicle.

➢ The IBS should only be replaced if a DTC for the IBS is active.

Stop-start Engine ON conditions:
1.
2.
3.
4.

Gear and brake switch conditions valid
Completed initial engine key start
Occupant sensed allowing engine start conditions
OBD conditions met allowing engine start conditions SOC (State of Charge) values found
under OBDII monitors using wiTech 2 – example below.
5. Vehicle hood is closed

This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

IBS State of Charge (SOF) tool display.

New IBS Installation
1. If the Installation of a new IBS sensor is required it should be onto a fully charged battery.
2. Once installed allow the sensor to read the SOC for up to 4 hours without added system loads.
3. Performing from 3 to 5 drive cycles with an 8-hour key off period will improve calibration accuracy
of the new sensor for proper operation.
4. Continue the drive cycles to allow proper adaption of the battery sensor State of Charge (SOC) and
State of Function (SOF).

This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Center
Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
ChryslereBay logo Group LLC

Contact the STAR Center for assistance if no solution is found

Version 5/23/13

1

Bestseller No. 1
ACDelco Gold 48AGM (88864541) 36 Month Warranty AGM BCI Group 48 Battery
  • High density negative paste, improves performance and...
  • Enhanced life alloy or Silver Calcium stamped alloy...
  • Calcium lead positive grid, maximizes conductivity and...
  • Robust envelope separator with puncture resistant back...
  • Vent cap design that resists acid leakage
Bestseller No. 2
ACDelco Gold 94RAGM (88864542) 36 Month Warranty AGM BCI Group 94R Battery
  • High density negative paste, improves performance and...
  • Enhanced life alloy or Silver Calcium stamped alloy...
  • Calcium Lead positive grid, maximizes conductivity and...
  • Robust Envelope Separator with puncture-resistant back...
  • Vent cap design that resists acid leakage

This product presentation was made with AAWP plugin.


If the PDF is very large, it may not load in the preview below.

Download PDF [957.97 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: S1408000384

Replacement Service Bulletin Number:

MFR Communication Date: 2024-01-10

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
Bestseller No. 3
Autel Professional OBD2 Scanner AL319 Code Reader, Enhanced Check and Reset Engine Fault Code, Live Data, Freeze Frame, CAN Car Diagnostic Scan Tools for All OBDII Vehicles After 1996, 2026 Upgraded
  • 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (ToyotaeBay logo, NissaneBay logo, HondaeBay logo, FordeBay logo, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners.
  • 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
  • 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
  • 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.

This product presentation was made with AAWP plugin.


Last update on 2026-06-05 / Affiliate links / Images from Amazon Product Advertising API


 
Share to...